summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-11-01clk: tegra: Add AHB DMA clock entryDmitry Osipenko
AHB DMA engine presents on Tegra20/30. Add missing clock entries, so that driver for the AHB DMA controller could be implemented. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-11-01clk: tegra: Mark APB clock as criticalJon Hunter
Currently, the APB clock is registered with the CLK_IGNORE_UNUSED flag to prevent the clock from being disabled if unused on boot. However, even if it is used, it still needs to be always kept enabled so that it doesn't get inadvertently disabled when all of its children are, and so update the flag for the APB clock to be CLK_IS_CRITICAL. Suggested-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-31Merge tag 'v4.15-rockchip-clk-1' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next Pull Rockchip clk drivers updates from Heiko Stuebner: - new clock ids for rk3188 and rk3368 - removal of a superfluous memory allocation error message * tag 'v4.15-rockchip-clk-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: use new cif/vdpu clock ids on rk3188 clk: rockchip: export clock pclk_efuse_256 for RK3368 SoCs clk: rockchip: add more rk3188 graphics clock ids clk: rockchip: add clock id for PCLK_EFUSE256 of RK3368 SoCs clk: rockchip: Remove superfluous error message in rockchip_clk_register_cpuclk()
2017-10-31Merge tag 'clk-renesas-for-v4.15-tag2' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next Pull Renesas clk driver updates from Geert Uytterhoeven: - Add support for the second display unit clock on RZ/G1E, - Add git repository to MAINTAINERS, - Add suspend/resume support for R-Car Gen3 CPG/MSSR, - Small fixes and cleanups. * tag 'clk-renesas-for-v4.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: rcar-gen3: Restore R clock during resume clk: renesas: rcar-gen3: Restore SDHI clocks during resume clk: renesas: div6: Restore clock state during resume clk: renesas: cpg-mssr: Add support to restore core clocks during resume clk: renesas: cpg-mssr: Restore module clocks during resume MAINTAINERS: Add git repository to Renesas clock driver section clk: renesas: cpg-mssr: Add du1 clock to R8A7745 clk: renesas: rz: clk-rz is meant for RZ/A1 clk: renesas: r8a77995: Correct parent clock of INTC-AP clk: renesas: r8a7796: Correct parent clock of INTC-AP clk: renesas: r8a7795: Correct parent clock of INTC-AP
2017-10-31Merge tag 'meson-clk-for-4.15' of git://github.com/baylibre/clk-meson into ↵Stephen Boyd
clk-next Pull Amlogic clock driver updates from Neil Armstrong: - Addition of Video Processing Unit VPU and VAPB clocks * tag 'meson-clk-for-4.15' of git://github.com/baylibre/clk-meson: clk: meson: gxbb: Add VPU and VAPB clocks data clk: meson: gxbb: Add VPU and VAPB clockids
2017-10-31Merge tag 'sunxi-clk-for-4.15' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-next Pull Allwinner clock driver updates from Maxime Ripard: - Addition of sigma/delta modulation for the audio PLLs on the newer SoCs - A83t Display clocks supports - minor fixes that didn't have any impact on current features * tag 'sunxi-clk-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: sun4i: Export video PLLs clk: sunxi-ng: Add A83T display clocks clk: sunxi-ng: sun8i: a23: Use sigma-delta modulation for audio PLL clk: sunxi-ng: sun6i: Use sigma-delta modulation for audio PLL clk: sunxi-ng: sun5i: Use sigma-delta modulation for audio PLL clk: sunxi-ng: sun4i: Use sigma-delta modulation for audio PLL clk: sunxi-ng: sun8i: h3: Use sigma-delta modulation for audio PLL clk: sunxi-ng: nm: Add support for sigma-delta modulation clk: sunxi-ng: Add sigma-delta modulation support clk: sunxi-ng: nm: Check if requested rate is supported by fractional clock clk: sunxi-ng: sun5i: Fix bit offset of audio PLL post-divider clk: sunxi-ng: a83t: Fix invalid csi-mclk mux offset clk: sunxi-ng: sun6i: Rename HDMI DDC clock to avoid name collision clk: sunxi-ng: sun6i: Export video PLLs clk: sunxi-ng: Implement reset control status readback clk: sunxi-ng: Fix missing CLK_SET_RATE_PARENT in ccu-sun4i-a10.c clk: sunxi-ng: add CLK_SET_RATE_PARENT flag to H3 GPU clock clk: sunxi-ng: add CLK_SET_RATE_UNGATE to all H3 PLLs
2017-10-30Merge tag 'clk-v4.15-exynos-pm' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk into clk-next Pull Samsung clk driver updates from Sylwester Nawrocki: - An addition of separate driver for the Exynos 4412 ISP CMU, needed to model and properly handle the clock controller's dependencies on the ISP power domain. - Adding __maybe_unused attributes to the exynos5433_cmu_{suspend, resume} ops to suppress compiler warnings with CONFIG_PM disabled. * tag 'clk-v4.15-exynos-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk: clk: samsung: Add a separate driver for Exynos4412 ISP clocks clk: samsung: Add dt bindings for Exynos4412 ISP clock controller clk: samsung: Instantiate Exynos4412 ISP clocks only when available clk: samsung: exynos5433: mark PM functions as __maybe_unused
2017-10-25Merge tag 'clk-v4.15-samsung' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk into clk-next Pull Samsung clk driver updates from Sylwester Nawrocki: Overall clk/samsung clean up and fixes. Removed remaining unused code after removal of exynos4212 SoC support; dropped internal data structure fields and related code for registering clkdev lookup entry for each possible clock object, clkdev aliases could still be defined if needed in a separate table; other minor fixes of the clock tree definitions. * tag 'clk-v4.15-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk: clk: samsung: Remove obsolete clkdev alias support clk: samsung: Add explicit MPLL, EPLL clkdev aliases in S3C2443 driver clk: samsung: Rework clkdev alias handling in S3C2443 driver clk: samsung: Rework clkdev alias handling in Exynos5440 driver clk: samsung: Drop useless alias in Exynos5420 clk driver clk: samsung: Remove clkdev alias support in Exynos5250 clk driver clk: samsung: Remove double assignment of CLK_ARM_CLK in Exynos4 driver clk: samsung: Remove clkdev alias support in Exynos4 clk driver clk: samsung: Remove support for obsolete Exynos4212 CPU clock clk: samsung: Remove support for Exynos4212 SoCs in Exynos CLKOUT driver clk: samsung: Properly propagate flags in __PLL macro clk: samsung: Fix m2m scaler clock on Exynos542x clk: samsung: Delete a memory allocation error message in clk-cpu.c
2017-10-25Merge tag 'clk-renesas-for-v4.15-tag1' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next Pull Renesas clk driver updates from Geert Uytterhoeven: - Add support for the new R-Car V3M SoC, - Small fixes and cleanups. * tag 'clk-renesas-for-v4.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: rcar-gen2: Delete error message for failed memory allocation clk: renesas: mstp: Delete error messages for failed memory allocations clk: renesas: cpg-mssr: Add R8A77970 support dt-bindings: clock: Add R8A77970 CPG core clock definitions
2017-10-20clk: renesas: rcar-gen3: Restore R clock during resumeGeert Uytterhoeven
On R-Car Gen3 systems, PSCI system suspend powers down the SoC, losing clock configuration. Register a notifier to save/restore the RCKCR register during system suspend/resume. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2017-10-20clk: renesas: rcar-gen3: Restore SDHI clocks during resumeGeert Uytterhoeven
On R-Car Gen3 systems, PSCI system suspend powers down the SoC, losing clock configuration. Register a notifier to save/restore SDHI clock registers during system suspend/resume. This is implemented using the cpg_simple_notifier abstraction, which can be reused for others clocks that just need to save/restore a single register. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2017-10-20clk: renesas: div6: Restore clock state during resumeGeert Uytterhoeven
On R-Car Gen3 systems, PSCI system suspend powers down the SoC, losing clock configuration. Register an (optional) notifier to restore the DIV6 clock state during system resume. As DIV6 clocks can be picky w.r.t. modifying multiple register fields at once, restore is not implemented by blindly restoring the register value, but by using the existing cpg_div6_clock_{en,dis}able() helpers. Note that this does not yet support DIV6 clocks with multiple parents, which do not exist on R-Car Gen3 SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2017-10-20clk: renesas: cpg-mssr: Add support to restore core clocks during resumeGeert Uytterhoeven
On R-Car Gen3 systems, PSCI system suspend powers down the SoC, possibly losing clock configuration. Hence add a notifier chain that can be used by core clocks to save/restore clock state during system suspend/resume. The implementation of the actual clock state save/restore operations is clock-specific, and to be registered with the notifier chain in the SoC or family-specific cpg_mssr_info.cpg_clk_register() callback. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2017-10-20clk: renesas: cpg-mssr: Restore module clocks during resumeGeert Uytterhoeven
During PSCI system suspend, R-Car Gen3 SoCs are powered down, and their clock register state is lost. Note that as the boot loader skips most initialization after system resume, clock register state differs from the state encountered during normal system boot, too. Hence after s2ram, some operations may fail because module clocks are disabled, while drivers expect them to be still enabled. E.g. EtherAVB fails when Wake-on-LAN has been enabled using "ethtool -s eth0 wol g": ravb e6800000.ethernet eth0: failed to switch device to config mode ravb e6800000.ethernet eth0: device will be stopped after h/w processes are done. ravb e6800000.ethernet eth0: failed to switch device to config PM: Device e6800000.ethernet failed to resume: error -110 In addition, some module clocks that were disabled by clk_disable_unused() may have been re-enabled, wasting power. To fix this, restore all bits of the SMSTPCR registers that represent clocks under control of Linux. Notes: - While this fixes EtherAVB operation after resume from s2ram, EtherAVB cannot be used as an actual wake-up source from s2ram, only from s2idle, due to PSCI limitations, - To avoid overhead on platforms not needing it, the suspend/resume code has a build time dependency on sleep and PSCI support, and a runtime dependency on PSCI. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2017-10-20MAINTAINERS: Add git repository to Renesas clock driver sectionGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-10-20clk: renesas: cpg-mssr: Add du1 clock to R8A7745Fabrizio Castro
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-20clk: renesas: rz: clk-rz is meant for RZ/A1Geert Uytterhoeven
The RZ family of Renesas SoCs has several different subfamilies (RZ/A, RZ/G, RZ/N, and RZ/T). Clarify that the renesas,rz-cpg-clocks DT bindings and clk-rz driver apply to RZ/A1 only. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org>
2017-10-20clk: meson: gxbb: Add VPU and VAPB clocks dataNeil Armstrong
The Amlogic Meson GX SoCs needs these two clocks to power up the VPU power domain. These two clocks are similar to the MALI clocks by having a glitch-free mux and two similar clocks with gate, divider and muxes. Acked-by: Jerome Brunet <jbrunet@baylibre.com> [narmstrong: removed the CLK_IGNORE_UNUSED on muxes and dividers] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-10-20clk: meson: gxbb: Add VPU and VAPB clockidsNeil Armstrong
Add the clkids for the clocks feeding the Video Processing Unit. Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-10-19clk: tegra: Make tegra_clk_pll_params __ro_after_initBhumika Goyal
These structures are only passed to the functions tegra_clk_register_pll, tegra_clk_register_pll{e/u} or tegra_periph_clk_init during the init phase. These functions modify the structures only during the init phase and after that the structures are never modified. Therefore, make them __ro_after_init. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-19clk: tegra: Fix sor1_out clock implementationThierry Reding
This clock was previously called sor1_src and was modelled as an input to the sor1 module clock. However, it's really an output clock that can be fed either from the safe, the sor1_pad_clkout or the sor1 module clocks. sor1 itself can take input from either of the display PLLs. The same implementation for the sor1_out clock is used on Tegra186, so this nicely lines up both SoC generations to deal with this clock in a uniform way. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-19clk: tegra: Use tegra_clk_register_periph_data()Thierry Reding
Instead of open-coding the same pattern repeatedly, reuse the newly introduced tegra_clk_register_periph_data() helper that will unpack the initialization structure. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-19clk: tegra: Add peripheral clock registration helperThierry Reding
There is a common pattern that registers individual peripheral clocks from an initialization table. Add a common implementation to remove the duplication from various call sites. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-19clk: tegra: Check BPMP response return codeTimo Alho
Check return code in BPMP response message(s). The typical error case is when a clock operation is attempted with an invalid clock identifier. Also remove error print from call to clk_get_info() as the implementation loops through the range of all possible identifiers, yet the operation is expected to error out when the clock ID is unused. Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-19Merge branch 'for-4.15/firmware' into for-4.15/clkThierry Reding
2017-10-19Merge branch 'for-4.15/dt-bindings' into for-4.15/clkThierry Reding
2017-10-17clk: sunxi-ng: sun4i: Export video PLLsJonathan Liu
The video PLLs are used directly by the HDMI controller. Export them so that we can use them in our DT node. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-17clk: sunxi-ng: Add A83T display clocksMaxime Ripard
Unfortunately, the A83t display clocks are not children of the de clock, since that clocks doesn't exist at all on the A83t. For now, they are orphans, so let's move them to their true, existing, parent. Fixes: 763c5bd045b1 ("clk: sunxi-ng: add support for DE2 CCU") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-17dt-bindings: clock: tegra: Add sor1_out clockThierry Reding
The sor1_src clock implemented on Tegra210 is modelled the wrong way around, which causes some issues with HDMI and DP support. This clock implementation is provided by BPMP on Tegra186, which models this in a more correct way. Since this introduces incompatibilities between the two SoC generations which we want to avoid, the Tegra210 will be fixed in subsequent patches. This change adds sor1_out as an alias for sor1_src. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-17firmware: tegra: Propagate error code to callerTimo Alho
Response messages from Tegra BPMP firmware contain an error return code as the first word of payload. The error code is used to indicate incorrectly formatted request message or use of non-existing resource (clk, reset, powergate) identifier. Current implementation of tegra_bpmp_transfer() ignores this code and does not pass it to caller. Fix this by adding an extra struct member to tegra_bpmp_message and populate that with return code. Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-16clk: samsung: Add a separate driver for Exynos4412 ISP clocksMarek Szyprowski
Some registers for the Exynos 4412 ISP (Camera subsystem) clocks are located in the ISP power domain. Because those registers are also located in a different memory region than the main clock controller, support for them can be provided by a separate clock controller. This in turn allows to almost seamlessly make it aware of the power domain using recently introduced runtime PM support for clocks. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2017-10-16clk: samsung: Add dt bindings for Exynos4412 ISP clock controllerMarek Szyprowski
Some registers for the Exynos 4412 ISP (Camera subsystem) clocks are located in the ISP power domain. Because those registers are also located in a different memory region than the main clock controller, support for them can be provided by a separate clock controller. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2017-10-16clk: samsung: Instantiate Exynos4412 ISP clocks only when availableMarek Szyprowski
Some registers for the Exynos 4412 ISP (Camera subsystem) clocks are located in the ISP power domain. Instantiate those clocks only when provided clock registers resource covers those registers. This is a preparation for adding a separate clock driver for ISP clocks, which will be integrated with power domain using runtime PM feature. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2017-10-16clk: renesas: r8a77995: Correct parent clock of INTC-APGeert Uytterhoeven
According to the R-Car Gen3 Hardware Manual Errata for Rev 0.55 of September 8, 2017, the parent clock of the INTC-AP module clock on R-Car D3 is S1D2. This change has no functional impact. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-16clk: renesas: r8a7796: Correct parent clock of INTC-APGeert Uytterhoeven
According to the R-Car Gen3 Hardware Manual Errata for Rev 0.55 of September 8, 2017, the parent clock of the INTC-AP module clock on R-Car M3-W is S0D3. This change has no functional impact. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-16clk: renesas: r8a7795: Correct parent clock of INTC-APGeert Uytterhoeven
According to the R-Car Gen3 Hardware Manual Errata for Rev 0.55 of September 8, 2017, the parent clock of the INTC-AP module clock on R-Car H3 ES2.0 is S0D3. This change has no functional impact. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-14clk: rockchip: use new cif/vdpu clock ids on rk3188Heiko Stuebner
Use the new clock-ids for cif, vdpu, vepu on rk3188 Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-10-14clk: rockchip: export clock pclk_efuse_256 for RK3368 SoCsRomain Perier
This exports the clock for the pclk gate of the eFuse that is part of the RK3368 SoCs. So we can use it from the dt-bindings. Signed-off-by: Romain Perier <romain.perier@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-10-14Merge branch 'v4.15-shared/clkids' into v4.15-clk/nextHeiko Stuebner
2017-10-14clk: rockchip: add more rk3188 graphics clock idsHeiko Stuebner
Add ids for cif, v{d/e}pu clocks on rk3188. ACLK_CIF does get a needed 1 at it's end but that should be safe because no driver for the camera interface has surfaced so far and the old vendor kernels for these socs are based on linux-3.0 and still used board files then, so there really are no previous users anywhere to be found. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-10-14clk: rockchip: add clock id for PCLK_EFUSE256 of RK3368 SoCsRomain Perier
Signed-off-by: Romain Perier <romain.perier@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-10-13clk: sunxi-ng: sun8i: a23: Use sigma-delta modulation for audio PLLChen-Yu Tsai
The audio blocks require specific clock rates. Until now we were using the closest clock rate possible with integer N-M factors. This resulted in audio playback being slightly slower than it should be. The vendor kernel gets around this (for newer SoCs) by using sigma-delta modulation to generate a fractional-N factor. As the PLL hardware is identical in most chips, we can back port the settings from the newer SoC, in this case the H3, onto the A23. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-13clk: sunxi-ng: sun6i: Use sigma-delta modulation for audio PLLChen-Yu Tsai
The audio blocks require specific clock rates. Until now we were using the closest clock rate possible with integer N-M factors. This resulted in audio playback being slightly slower than it should be. The vendor kernel gets around this (for newer SoCs) by using sigma-delta modulation to generate a fractional-N factor. As the PLL hardware is identical in most chips, we can back port the settings from the newer SoC, in this case the H3, onto the A31. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-13clk: sunxi-ng: sun5i: Use sigma-delta modulation for audio PLLChen-Yu Tsai
The audio blocks require specific clock rates. Until now we were using the closest clock rate possible with integer N-M factors. This resulted in audio playback being slightly slower than it should be. The vendor kernel gets around this (for newer SoCs) by using sigma-delta modulation to generate a fractional-N factor. As the PLL hardware is identical in most chips, we can back port the settings from the newer SoC, in this case the H3, onto the sun5i family. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-13clk: sunxi-ng: sun4i: Use sigma-delta modulation for audio PLLChen-Yu Tsai
The audio blocks require specific clock rates. Until now we were using the closest clock rate possible with integer N-M factors. This resulted in audio playback being slightly slower than it should be. The vendor kernel gets around this (for newer SoCs) by using sigma-delta modulation to generate a fractional-N factor. As the PLL hardware is identical in most chips, we can back port the settings from the newer SoC, in this case the H3, onto the A10 and A20. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-13clk: sunxi-ng: sun8i: h3: Use sigma-delta modulation for audio PLLChen-Yu Tsai
The audio blocks require specific clock rates. Until now we were using the closest clock rate possible with integer N-M factors. This resulted in audio playback being slightly slower than it should be. The vendor kernel gets around this (for newer SoCs) by using sigma-delta modulation to generate a fractional-N factor. This patch copies the parameters for the H3. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-13clk: sunxi-ng: nm: Add support for sigma-delta modulationChen-Yu Tsai
Some of the N-M-style clocks, namely the PLLs, support sigma-delta modulation to do fractional-N frequency synthesis. This is used in the audio PLL to generate the exact frequency the audio blocks need. These frequencies can not be generated with integer N-M factors. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-13clk: sunxi-ng: Add sigma-delta modulation supportChen-Yu Tsai
Sigma-delta modulation is supported for some PLLs. This allows fractional-N multipliers to be used. In reality we don't know how to configure the individual settings for it. However we can copy existing settings from the vendor kernel to support clock rates that cannot be generated from integer factors, but are really desired. The vendor kernel only uses this for the audio PLL clock, and only on the latest chips. This patch adds a new class of clocks, along with helper functions. It is intended to be merged into N-M-factor style clocks as a feature, much like fractional clocks. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-13clk: sunxi-ng: nm: Check if requested rate is supported by fractional clockChen-Yu Tsai
The round_rate callback for N-M-factor style clocks does not check if the requested clock rate is supported by the fractional clock mode. While this doesn't affect usage in practice, since the clock rates are also supported through N-M factors, it does not match the set_rate code. Add a check to the round_rate callback so it matches the set_rate callback. Fixes: 6174a1e24b0d ("clk: sunxi-ng: Add N-M-factor clock support") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-13clk: sunxi-ng: sun5i: Fix bit offset of audio PLL post-dividerChen-Yu Tsai
The post-divider for the audio PLL is in bits [29:26], as specified in the user manual, not [19:16] as currently programmed in the code. The post-divider has a default register value of 2, i.e. a divider of 3. This means the clock rate fed to the audio codec would be off. This was discovered when porting sigma-delta modulation for the PLL to sun5i, which needs the post-divider to be 1. Fix the bit offset, so we do actually force the post-divider to a certain value. Fixes: 5e73761786d6 ("clk: sunxi-ng: Add sun5i CCU driver") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 02:33:16 +0000