summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-07ASoC: Use delayed work for debounce of GPIO based jacksMark Brown
Rather than block the workqueue by sleeping to do the debounce use delayed work to implement the debounce time. This should also means that we extend the debounce time on each new bounce, potentially allowing shorter debounce times for clean insertions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-07ASoC: Staticise AD1980 DAIMark Brown
It doesn't need to be exported with multi-component. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-05ASoC: remove duplicated include for nuc900Nicolas Kaiser
Remove duplicated include. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-05ASoC: sh: fix build error: terminate the platform device ID listGuennadi Liakhovetski
Platform driver ID table must be zero-element terminated. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-05ASoC: WM8804: Retrieve the device revision and print itDimitris Papastamos
Be verbose and print out the device revision. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-05ASoC: soc-cache: Add spi_write support for all I/O typesDimitris Papastamos
Ensure that all drivers that use SPI and I2C will work properly by providing SPI write functions for all different I/O types. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-05Merge branch 'topic/asoc' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-2.6.37
2010-10-05Merge branch 'for-2.6.37' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
2010-10-04ALSA: ASoc: DaVinci Delay start of ASP to triggerTroy Kisky
Since only 4 mainline ASoC codecs support the trigger callback, we cannot rely upon them stopping the frame clock if they are master and must assume it is running even if the sound is paused. Thus we cannot start the ASP until the trigger method. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Martin Ambrose <martin@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-04omap: devices: Avoid merge conflict between ASoC and OMAP hwmod changesJarkko Nikula
Upcoming ASoC multi-component and OMAP hwmod changes will conflict in arch/arm/mach-omap2/devices.c. Avoid this by moving a little bit include statement introduced by ASoC Multi-Component Support patch. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-04ASoC: WM8804: Power down the PLL correctlyDimitris Papastamos
The PLL is disabled when the corresponding bit is set not the other way around. This commit depends on my other commit with Subject "ASoC: WM8804: Refactor set_pll code to avoid GCC warnings". Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-04ASoC: WM8804: Refactor set_pll code to avoid GCC warningsDimitris Papastamos
Ensure that no uninitialised variable warnings are generated by GCC. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-03Merge branch 'for-2.6.37' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2010-10-02ASoC: WM8804: Use a proper DAI nameDimitris Papastamos
Make sure the DAI name does not include a '/' since we might have per DAI debugfs or sysfs entries in the future. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-02ASoC: Put WM8962 GPIO2/3 into GPIO mode when configuring platform data tooMark Brown
GPIO2 and GPIO3 on the WM8962 are MFPs and need to be put into GPIO mode before the GPIO block can be used to control them. We're already doing this when used via gpiolib, factor out the code for use when setting static configurations via platform data as well. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-02ASoC: Implement interrupt based jack detectionMark Brown
Allow microphone detection on WM8962 to be performed using the interrupt signal, allowing the detection of both microphone presence and button presses with a signal singal from the CODEC to CPU. Currently a 250ms debounce time is applied to both short circuit and presence detection, this has not been optimised. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-02ASoC: Add support for WM8962 GPIO outputsMark Brown
The WM8962 features five GPIOs, add support for controlling their output state via gpiolib. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-01ASoC: Remove -dai suffix from i.MX SSI driverMark Brown
While it is a generic serial port in practice the i.MX SSI is only supported in Linux as an audio port (the i.MX has dedicated SPI controllers and so on). This means we don't need to disambiguate against other uses of the hardware and so can drop the -dai suffix from the driver name which fixes merge issues with the i.MX tree in -next. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-30ASoC: Relax restrictions on WM8962 BCLK configurationMark Brown
The restrictions on configuring BCLK are overly cautious, other constraints in the system should ensure that reconfiguration is not possible when the device is sufficiently active to be unable to support reclocking. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-30ASoC: WM8804: Initial driverDimitris Papastamos
The WM8804 is a high performance consumer mode S/PDIF transceiver with support for 1 received channel and 1 transmitted channel. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-30ASoC: Remove unneeded use of spi_bus_typeDimitris Papastamos
No need to explicitly set the bus type, spi_register_driver does that for us. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-30ASoC: Provide microphone bias configuration for WM8962Mark Brown
Add the widget for MICBIAS power control and allow configuration of the microphone bias setup via the platform data for the WM8962. When microphone status signals are brought out to GPIO this should be sufficient to enable microphone detection. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-30ASoC: Mark WM8962 Additional Control 4 register as volatileMark Brown
There are some status bits for microphone detection in here. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-29ASoC: Initial WM8962 IRQ supportMark Brown
Provide an initial hookup for interrupts on the WM8962. Currently we simply report error status via log messages if an IRQ is provided for the device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-29ASoC: Lowercase WM8962 CODEC nameMark Brown
For consistency. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-28ASoC: Fix masking of WM8962 FLL1 registerMark Brown
When configuring the FLL we preserve the FLL enable configuration in order to allow us to reenable the FLL after configuration but we do not clear the other bits in the register, causing old configuration to be preserved. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-28ASoC: WM8985: Use the correct macro for the kcontrol definedDimitris Papastamos
Since we are using custom get/put handlers use SOC_ENUM_SINGLE_EXT_DECL instead of the original SOC_ENUM_SINGLE_DECL macro. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-27ASoC: Fix a compile warning for printk formatTakashi Iwai
sound/soc/codecs/wm8985.c: In function 'wm8985_hw_params': sound/soc/codecs/wm8985.c:731:2: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Actually the variable is fine as int. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-25Merge branch 'for-2.6.36' into for-2.6.37Mark Brown
2010-09-25ASoC: Add Jassi Brar as Samsung maintainerMark Brown
Since Jassi is doing so much good work and can offer such good review for the Samsung CPU support add an entry for the Samsung ASoC drivers to MAINTAINERS listing him. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-24omap: zoom: Move new code introduced by ASoC m-c to board-zoom-peripheralsJarkko Nikula
ASoC Multi-Component Support moves some code from sound/soc/omap/zoom2.c into arch/arm/mach-omap2/board-zoom2.c. However, that code should go to board-zoom-peripherals.c instead as there is common code and registration for zoom boards. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Lopez Cruz, Misael <x0052729@ti.com> Cc: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-24omap: zoom2: Fix ASoC multi-component build breakage by removing dead codeJarkko Nikula
ASoC Multi-Component Support patch removes #if 0 in board-zoom2.c that was used to protect some uncompiling dead code. Remove that code as it seems to be here quite some time since commit 479f12c. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Tony Lindgren <tony@atomide.com> Tested-by: Misael Lopez Cruz <misael.lopez@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-24ASoC: WM8985: Remove unneeded declaration.Dimitris Papastamos
We are not using the private data in this function, so get rid of it. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-24ASoC: Clean up AC'97 glue driverMark Brown
Remove version number and clean up some indentation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-24ASoC: Add debug logging for s3c-ac97 resetsMark Brown
Helps tracing errors further up the stack. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-24ASoC: Convert s3c-ac97 to pr_() macrosMark Brown
Could use dev_() but we'd have to remember the struct device somewhere and it wouldn't make the logging clearer. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-24ASoC: Clean up the CODEC device as well as the board for SMDK WM9713Mark Brown
Otherwise we try to re-register the CODEC device if the module is reloaded and sysfs becomes miserable. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-24ASoC: Clarify naming for SMDK WM9713 driverMark Brown
At least some of the systems using this device have multiple audio subsystems so provide some guidance to userspace about which one this is. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-24ASoC: Remove unneeded WM9713 header include from SMDK WM9713 driverMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-23ASoC: Fix incorrect parameter to snd_soc_codec_volatile_registerDimitris Papastamos
We need to pass the register index and not the register value. This patch depends on my previous patch "ASoC: Delegate to hw specific read for volatile registers". Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-23ASoC: Delegate to hw specific read for volatile registersDimitris Papastamos
Ensure that reads on volatile registers will correctly delegate to the bus specific read function. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-23ASoC: adapt multi-componentism againTakashi Iwai
Go back to the new world order. (Also fixed indentation.) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-23Merge branch 'for-2.6.36' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
2010-09-22ASoC: Fix multi-componentismMark Brown
Spot the build testing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-22ASoC: Return -1 instead of -EINVAL to ensure consistencyDimitris Papastamos
The code can't really cope with I/O errors, so it would be better to be consistent throughout all cache functions and return -1 instead of -EINVAL. The return value of snd_soc_read(...) is mostly checked in the probe function and nowhere else. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-22ASoC: Report error codes for card DAI instantiation failuresMark Brown
Also clean up the error print a bit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-09-22Merge branch 'for-2.6.37' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into for-2.6.37
2010-09-22Merge branch 'for-2.6.36' into for-2.6.37Mark Brown
2010-09-22ASoC: Fix soc-cache buffer overflow bugDimitris Papastamos
Make sure we stay within the cache boundaries when updating the register cache. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-21ASoC: Fix soc-cache buffer overflow bugDimitris Papastamos
Make sure we stay within the cache boundaries when updating the register cache. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 08:44:58 +0000