summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-08watchdog: introduce CONFIG_WATCHDOG_OPEN_TIMEOUTRasmus Villemoes
This allows setting a default value for the watchdog.open_timeout commandline parameter via Kconfig. Some BSPs allow remote updating of the kernel image and root file system, but updating the bootloader requires physical access. Hence, if one has a firmware update that requires relaxing the watchdog.open_timeout a little, the value used must be baked into the kernel image itself and cannot come from the u-boot environment via the kernel command line. Being able to set the initial value in .config doesn't change the fact that the value on the command line, if present, takes precedence, and is of course immensely useful for development purposes while one has console acccess, as well as usable in the cases where one can make a permanent update of the kernel command line. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: introduce watchdog.open_timeout commandline parameterRasmus Villemoes
The watchdog framework takes care of feeding a hardware watchdog until userspace opens /dev/watchdogN. If that never happens for some reason (buggy init script, corrupt root filesystem or whatnot) but the kernel itself is fine, the machine stays up indefinitely. This patch allows setting an upper limit for how long the kernel will take care of the watchdog, thus ensuring that the watchdog will eventually reset the machine. A value of 0 (the default) means infinite timeout, preserving the current behaviour. This is particularly useful for embedded devices where some fallback logic is implemented in the bootloader (e.g., use a different root partition, boot from network, ...). There is already handle_boot_enabled serving a similar purpose. However, such a binary choice is unsuitable if the hardware watchdog cannot be programmed by the bootloader to provide a timeout long enough for userspace to get up and running. Many of the embedded devices we see use external (gpio-triggered) watchdogs with a fixed timeout of the order of 1-2 seconds. The open timeout only applies for the first open from userspace. Should userspace need to close the watchdog device, with the intention of re-opening it shortly, the application can emulate the open timeout feature by combining the nowayout feature with an appropriate WDIOC_SETTIMEOUT immediately prior to closing the device. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08dt-bindings: watchdog: move i.MX system controller watchdog binding to SCUAnson Huang
i.MX system controller watchdog depends on SCU driver to support interrupt function, so it needs to be subnode of SCU node in DT, binding doc should be moved to fsl,scu.txt as well. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: imx_sc: Add pretimeout supportAnson Huang
i.MX system controller watchdog can support pretimeout IRQ via general SCU MU IRQ, it depends on IMX_SCU and driver MUST be probed after SCU IPC ready, then enable corresponding SCU IRQ group and register SCU IRQ notifier, when watchdog pretimeout IRQ fires, SCU MU IRQ will be handled and watchdog pretimeout notifier will be called to handle the event. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: renesas_wdt: Add a few cycles delayYoshihiro Shimoda
According to the hardware manual of R-Car Gen2 and Gen3, software should wait a few RLCK cycles as following: - Delay 2 cycles before setting watchdog counter. - Delay 3 cycles before disabling module clock. So, this patch adds such delays. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: gpio: add support for nowayout optionMans Rullgard
Add support for the nowayout option in the gpio watchdog driver. Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: renesas_wdt: Use 'dev' instead of dereferencing it repeatedlyHoan Nguyen An
Add helper variable dev = &pdev->dev Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08dt-bindings: watchdog: add Allwinner H6 watchdogClément Péron
Allwinner H6 has a similar watchdog as the A64 which is already a compatible of the A31. This commit add the H6 compatible. Signed-off-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: jz4740: Avoid starting watchdog in set_timeoutPaul Cercueil
Previously the jz4740_wdt_set_timeout() function was starting the timer unconditionally, even if it was stopped when that function was entered. Now, the timer will be restarted only if it was already running before this function is called. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: jz4740: Use register names from <linux/mfd/ingenic-tcu.h>Paul Cercueil
Use the macros from <linux/mfd/ingenic-tcu.h> instead of declaring our own. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog/hpwdt: Reflect changesJerry Hoemann
Bump driver number to reflect recent changes. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog/hpwdt: Update documentationJerry Hoemann
Update documentation to explain new module parameter kdumptimeout. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog/hpwdt: Add module parameter kdumptimeout.Jerry Hoemann
Instead of unconditionally stopping the watchdog timer after receipt of a pretimeout NMI, reprogram the timeout based upon module parameter kdumptimeout. The provides a more flexible override than the depricated allow_kdump. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog/hpwdt: Have core ping watchdog.Jerry Hoemann
Instead of stopping the hw timer during probe, have the core update the timer if the timer is already running. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog/hpwdt: Advertize max_hw_heartbeat_msJerry Hoemann
Set max_hw_heartbeat_ms instead of max_timeout so that user client can set timeout range in excess of what the underlying hardware supports. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog/hpwdt: Stop hpwdt on unregister.Jerry Hoemann
Have the WD core stop the watchdog on unregister instead of explicitly calling hpwdt_stop() in hpwdt_exit(). Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: bcm2835_wdt: Fix module autoloadStefan Wahren
The commit 5e6acc3e678e ("bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.") broke module autoloading on Raspberry Pi. So add a module alias this fix this. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: sama5d4: fix WDD value to be always set to maxEugen Hristev
WDD value must be always set to max (0xFFF) otherwise the hardware block will reset the board on the first ping of the watchdog. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: xen_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: wm831x_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: ts4800_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: tegra_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: stmp3xxx_rtc_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: stm32_iwdg: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: st_lpc_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: sprd_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: sp805_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: sp5100_tco: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: sama5d4_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: s3c2410_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: rave-sp-wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: qcom-wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: pnx4008_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: pic32-wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: pic32-dmt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: of_xilinx_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: npcm_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: nic7018_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: ni903x_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: mpc8xxx_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: menf21bmc_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: mena21_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: mei_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: max77620_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: loongson1_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: jz4740_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: intel-mid_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: imx_sc_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: imx2_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: ie6xx_wdt: drop warning after registering deviceWolfram Sang
The core will print out details now. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-08 00:32:26 +0000