summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-22tg3: Work around HW/FW limitations with vlan encapsulated framesVlad Yasevich
TG3 appears to have an issue performing TSO and checksum offloading correclty when the frame has been vlan encapsulated (non-accelrated). In these cases, tcp checksum is not correctly updated. This patch attempts to work around this issue. After the patch, 802.1ad vlans start working correctly over tg3 devices. CC: Prashant Sreedharan <prashant@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22macvlan: allow to enqueue broadcast pkt on virtual deviceNicolas Dichtel
Since commit 412ca1550cbe ("macvlan: Move broadcasts into a work queue"), the driver uses tx_queue_len of the master device as the limit of packets enqueuing. Problem is that virtual drivers have this value set to 0, thus all broadcast packets were rejected. Because tx_queue_len was arbitrarily chosen, I replace it with a static limit of 1000 (also arbitrarily chosen). CC: Herbert Xu <herbert@gondor.apana.org.au> Reported-by: Thibaut Collet <thibaut.collet@6wind.com> Suggested-by: Thibaut Collet <thibaut.collet@6wind.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22pch_gbe: 'select' NET_PTP_CLASSIFY.David S. Miller
Fixes the following randconfig build failure: > drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c: In function > ‘pch_ptp_match’: > drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c:130:2: error: > implicit declaration of function ‘ptp_classify_raw’ > [-Werror=implicit-function-declaration] > if (ptp_classify_raw(skb) == PTP_CLASS_NONE) > ^ > cc1: some warnings being treated as errors > make[5]: *** [drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.o] Error 1 Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22scsi: Use 'depends' with LIBFC instead of 'select'.David S. Miller
LIBFC depends upon SCSI_FC_ATTRS and select's CRC32C. The only alternative would be to 'select' CRC32C and all of SCSI_FC_ATTRS direct and indirect dependencies in the Kconfig section for every LIBFCOE user which makes little sense. Subsequently, use 'depends' instead of 'select' for LIBFCOE too. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19Merge tag 'linux-can-fixes-for-3.17-20140918' of ↵David S. Miller
git://gitorious.org/linux-can/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2014-09-18 this is a pull request of 8 patches for current net. A patch by Roger Quadros for the c_can driver fixes the swapped parameters of the c_can_hw_raminit_ti() function. Oliver Hartkopp adds the missing PCI ids to the peak_pci driver to support the single channel PCAN ExpressCard 34 adapter. David Dueck converts the at91_can driver to use proper clock handling functions. Then there are 5 patches by David Jander and me which fix several mailbox related problems in the flexcan driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19openvswitch: restore OVS_FLOW_CMD_NEW notificationsSamuel Gauthier
Since commit fb5d1e9e127a ("openvswitch: Build flow cmd netlink reply only if needed."), the new flows are not notified to the listeners of OVS_FLOW_MCGROUP. This commit fixes the problem by using the genl function, ie genl_has_listerners() instead of netlink_has_listeners(). Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19genetlink: add function genl_has_listeners()Nicolas Dichtel
This function is the counterpart of the function netlink_has_listeners(). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19lib: rhashtable: remove second linux/log2.h inclusionFabian Frederick
linux/log2.h was included twice. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net: allow macvlans to move to net namespaceFrancesco Ruggeri
I cannot move a macvlan interface created on top of a bonding interface to a different namespace: % ip netns add dummy0 % ip link add link bond0 mac0 type macvlan % ip link set mac0 netns dummy0 RTNETLINK answers: Invalid argument % The problem seems to be that commit f9399814927a ("bonding: Don't allow bond devices to change network namespaces.") sets NETIF_F_NETNS_LOCAL on bonding interfaces, and commit 797f87f83b60 ("macvlan: fix netdev feature propagation from lower device") causes macvlan interfaces to inherit its features from the lower device. NETIF_F_NETNS_LOCAL should not be inherited from the lower device by a macvlan. Patch tested on 3.16. Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19Merge tag 'master-2014-09-16' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-09-17 Please pull this batch of fixes intended for the 3.17 stream... Arend van Spriel sends a trio of minor brcmfmac fixes, including a fix for a Kconfig/build issue, a fix for a crash (null reference), and a regression fix related to event handling on a P2P interface. Hante Meuleman follows-up with a brcmfmac fix for a memory leak. Johannes Stezenbach brings an ath9k_htc fix for a regression related to hardware decryption offload. Marcel Holtmann delivers a one-liner to properly mark a device ID table in rfkill-gpio. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-193c59x: Fix bad offset spec in skb_frag_dma_mapNeil Horman
Recently aded the use of skb_frag_dma_map to 3c59x, but didn't realize it automatically included the frag_offset internally, as well as provided an option to specify an extra offset in the parameter list. We need to specify an offset of 0 in the parameter list to avoid skb corruption that results in lost connections. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Linux Kernel list <linux-kernel@vger.kernel.org> CC: "David S. Miller" <davem@davemloft.net> CC: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee>
2014-09-193c59x: Add dma error checking and recoveryNeil Horman
Noted that 3c59x has no checks on transmit for failed DMA mappings, and no ability to unmap fragments when a single map fails in the middle of a transmit. This patch provides error checking to ensure that dma mappings work properly, and unrolls an skb mapping if a fragmented skb transmission has a mapping failure to prevent leaks. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Linux Kernel list <linux-kernel@vger.kernel.org> CC: "David S. Miller" <davem@davemloft.net> CC: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee>
2014-09-19sparc: bpf_jit: fix support for ldx/stx mem and SKF_AD_VLAN_TAGAlexei Starovoitov
fix several issues in sparc BPF JIT compiler. ldx/stx related: . classic BPF instructions that access mem[] slots were not setting SEEN_MEM flag, so stack wasn't allocated. Fix that by advertising correct flags . LDX/STX instructions were missing SEEN_XREG, so register value could have leaked to user space. Fix it. . since stack for mem[] slots is allocated with 'sub %sp' instead of 'save %sp', use %sp as base register instead of %fp. . ldx mem[0] means first slot in classic BPF which should have -4 offset instead of 0. . sparc64 needs 2047 stack bias as per ABI to access stack . emit_stmem() was using LD32I macro instead of ST32I SKF_AD_VLAN_TAG* related: . SKF_AD_VLAN_TAG_PRESENT must return 1 or 0 instead of '> 0' or 0 as per classic BPF de facto standard . SKF_AD_VLAN_TAG needs to mask the field correctly Fixes: 2809a2087cc4 ("net: filter: Just In Time compiler for sparc") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-18can: at91_can: add missing prepare and unprepare of the clockDavid Dueck
In order to make the driver work with the common clock framework, this patch converts the clk_enable()/clk_disable() to clk_prepare_enable()/clk_disable_unprepare(). While there, add the missing error handling. Signed-off-by: David Dueck <davidcdueck@googlemail.com> Signed-off-by: Anthony Harivel <anthony.harivel@emtrion.de> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-09-18can: flexcan: increase FLEXCAN_MCR_MAXMB() macro to 7 bitsMarc Kleine-Budde
This patch increases the mask in the FLEXCAN_MCR_MAXMB() to 7 bits as in the newer flexcan cores the MAXMB field is 7 bits wide. Reported-by: David Jander <david@protonic.nl> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-09-18can: flexcan: put TX mailbox into TX_INACTIVE mode after tx-completeMarc Kleine-Budde
After sending a RTR frame the TX mailbox becomes a RX_EMPTY mailbox. To avoid side effects when the RX-FIFO is full, this patch puts the TX mailbox into TX_INACTIVE mode in the transmission complete interrupt handler. This, of course, leaves a race window between the actual completion of the transmission and the handling of tx-complete interrupt. However this is the best we can do without busy polling the tx complete interrupt. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-09-18can: flexcan: implement workaround for errata ERR005829David Jander
This patch implements the workaround mentioned in ERR005829: ERR005829: FlexCAN: FlexCAN does not transmit a message that is enabled to be transmitted in a specific moment during the arbitration process. Workaround: The workaround consists of two extra steps after setting up a message for transmission: Step 8: Reserve the first valid mailbox as an inactive mailbox (CODE=0b1000). If RX FIFO is disabled, this mailbox must be message buffer 0. Otherwise, the first valid mailbox can be found using the "RX FIFO filters" table in the FlexCAN chapter of the chip reference manual. Step 9: Write twice INACTIVE code (0b1000) into the first valid mailbox. Signed-off-by: David Jander <david@protonic.nl> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-09-18can: flexcan: correctly initialize mailboxesDavid Jander
Apparently mailboxes may contain random data at startup, causing some of them being prepared for message reception. This causes overruns being missed or even confusing the IRQ check for trasmitted messages, increasing the transmit counter instead of the error counter. This patch initializes all mailboxes after the FIFO as RX_INACTIVE. Signed-off-by: David Jander <david@protonic.nl> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-09-18can: flexcan: mark TX mailbox as TX_INACTIVEMarc Kleine-Budde
This patch fixes the initialization of the TX mailbox. It is now correctly initialized as TX_INACTIVE not RX_EMPTY. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-09-18can: peak_pci: add PCI ID definition pcie card variantOliver Hartkopp
Add PCI ID definition for the single channel PCAN ExpressCard 34 adapter. Due to the subsystem id evaluation the correct number of channels (here 1) is created at initialization time. Tested including the LED functionality. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-09-18can: c_can_platform: fix parameters of c_can_hw_raminit_ti()Roger Quadros
Pass the correct 'mask' and 'value' bits to c_can_hw_raminit_wait_ti(). They seem to have been swapped in the usage instances. Reported-by: Jay Schroeder <jay.schroeder@garmin.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-09-16scsi: use 'depends' instead of 'select' for SCSI_FC_ATTRSRandy Dunlap
There are other kconfig symbols which use SCSI_FC_ATTRS. In order to maintain sanity and prevent kconfig warnings, change all of these from using 'select' to using 'depends on' so that proper symbol dependencies will be honored and circular depends problems will be avoided. This fixes kconfig warnings and build errors: warning: (LIBFC && SCSI_IBMVFC && SCSI_QLA_FC && SCSI_LPFC && ZFCP && SCSI_BFA_FC && SCSI_CHELSIO_FCOE && FUSION_FC) selects SCSI_FC_ATTRS which has unmet direct dependencies (SCSI && NET) drivers/scsi/scsi_transport_fc.c: In function 'fc_host_post_event': drivers/scsi/scsi_transport_fc.c:543:7: error: 'scsi_nl_sock' undeclared (first use in this function) drivers/scsi/scsi_transport_fc.c: In function 'fc_host_post_vendor_event': drivers/scsi/scsi_transport_fc.c:611:7: error: 'scsi_nl_sock' undeclared (first use in this function) Reported-by: Fengguang Wu <fengguang.wu@intel.com> [0-day test robot] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-16sfc: fix addr_list_lock spinlock use before initEdward Cree
Reported by Nikolay Aleksandrov. In efx_init_port() we call efx_mac_reconfigure() to work around a Falcon/A1 limitation, and this calls efx_{arch}_filter_sync_rx_mode(), which takes the addr_list_lock; but this lock is uninitialised, because we haven't called register_netdevice() yet. So, in efx_farch_filter_sync_rx_mode(), check efx_dev_registered() before doing anything else. The EF10 equivalent, efx_ef10_filter_sync_rx_mode(), already has the corresponding check. Signed-off-by: Edward Cree <ecree@solarflare.com> Tested-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-16net: rfkill: gpio: Enable module auto-loading for ACPI based switchesMarcel Holtmann
For the ACPI based switches the MODULE_DEVICE_TABLE is missing to export the entries for module auto-loading. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-16r8169: adjust __rtl8169_set_featureshayeswang
Remove the "changed" test in __rtl8169_set_features(). Instead, do simple test in rtl8169_set_features(). Set the RxChkSum and RxVlan through __rtl8169_set_features() in rtl_open(). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-16scsi: fix build errors, SCSI_FC_ATTRS needs to depend on SCSI && NETRandy Dunlap
Fix build errors when CONFIG_SCSI_NETLINK is enabled but CONFIG_NET is not enabled: drivers/built-in.o: In function `scsi_nl_rcv_msg': scsi_netlink.c:(.text+0x1850fa): undefined reference to `netlink_ack' scsi_netlink.c:(.text+0x185105): undefined reference to `skb_pull' scsi_netlink.c:(.text+0x18515d): undefined reference to `netlink_capable' drivers/built-in.o: In function `scsi_netlink_init': (.text+0x185244): undefined reference to `init_net' drivers/built-in.o: In function `scsi_netlink_init': (.text+0x185258): undefined reference to `__netlink_kernel_create' drivers/built-in.o: In function `scsi_netlink_exit': (.text+0x185291): undefined reference to `netlink_kernel_release' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15Merge branch 'bnx2-deps'David S. Miller
Anish Bhatt says: ==================== net: Fix randconfig errros in bnx2i/bnx2fc caused by IPV6 Just like CNIC bnx2i/bnx2fc also have their tristate dependent on IPV6, however using the same solution as CNIC can cause recursive dependecies during make. Based on suggestions by Randy Dunlap, SCSI_NETLINK now depends on NET instead of selecting NET. Second patch fixes the actual randconfig error. Entire thread can be followed here : https://lkml.org/lkml/2014/9/9/500 Fixes: c99d667e8527 ("cnic : Cleanup CONFIG_IPV6 & VLAN check") ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15bnx2i/bnx2fc : fix randconfig error in next-20140909Anish Bhatt
Just like CNIC, tristate of these two modules is also dependent on IPV6. These need to be handled separately as they select CNIC, which can override tristate for CNIC from 'm' to 'y', which can cause build failures when ipv6 is compiled as a module even if CNIC's Kconfig will only 'm' or 'n' when ipv6 is compiled as a module. Fixes: c99d667e8527 ("cnic : Cleanup CONFIG_IPV6 & VLAN check") Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15scsi_netlink : Make SCSI_NETLINK dependent on NET instead of selecting NETAnish Bhatt
Required for avoiding recursive dependencies in the Kconfig, brought out by fixing randconfig error for bnx2i/bnx2fc in the patch that follows. As suggested by Randy Dunlap Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15cxgb4: Don't allocate adapter structure for all PF'sHariprasad Shenai
commit 35b1de557970 ("rdma/cxgb4: Fixes cxgb4 probe failure in VM when PF is exposed through PCI Passthrough") moved the code to check for SR-IOV PF[0..3] much further down in init_one() past the point where we allocate a (struct adapter) for PF[0..3]. As a result, we left four of these on ever module remove. Fix: Allocate adapter structure only for PF4 Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15bridge: Fix br_should_learn to check vlan_enabledVlad Yasevich
As Toshiaki Makita pointed out, the BRIDGE_INPUT_SKB_CB will not be initialized in br_should_learn() as that function is called only from br_handle_local_finish(). That is an input handler for link-local ethernet traffic so it perfectly correct to check br->vlan_enabled here. Reported-by: Toshiaki Makita<toshiaki.makita1@gmail.com> Fixes: 20adfa1 bridge: Check if vlan filtering is enabled only once. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15ath9k_htc: fix random decryption failureJohannes Stezenbach
In v3.15 the driver stopped to accept network packets after successful authentification, which could be worked around by passing the nohwcrypt=1 module parameter. This was not reproducible by everyone, and showed random behaviour in some tests. It was caused by an uninitialized variable introduced in 4ed1a8d4a257 ("ath9k_htc: use ath9k_cmn_rx_accept") and used in 341b29b9cd2f ("ath9k_htc: use ath9k_cmn_rx_skb_postprocess"). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=78581 Fixes: 341b29b9cd2f ("ath9k_htc: use ath9k_cmn_rx_skb_postprocess") Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15brcmfmac: handle IF event for P2P_DEVICE interfaceArend van Spriel
The firmware notifies about interface changes through the IF event which has a NO_IF flag that means host can ignore the event. This behaviour was introduced in the driver by: commit 2ee8382fc6c763c76396a6aaff77a27089eed3aa Author: Arend van Spriel <arend@broadcom.com> Date: Sat Aug 10 12:27:24 2013 +0200 brcmfmac: ignore IF event if firmware indicates it It turns out that the IF event for the P2P_DEVICE also has this flag set, but the event should not be ignored in this scenario. The mentioned commit caused a regression in 3.12 kernel in creation of the P2P_DEVICE interface. Cc: <stable@vger.kernel.org> # 3.14, 3.16 Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15brcmfmac: obtain ifp through wdev structureArend van Spriel
For P2P_DEVICE interface the function brcmf_cfg80211_update_proto_addr_mode() resulted in a crash, because it assumed wdev->netdev would be valid. The ifp should be obtained through the driver vif structure which contains the wireless_dev. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15brcmfmac: conditionally compile firmware protocol source codeArend van Spriel
The host-interface can select which protocol implementation it needs. Selecting PCIe will include the msgbuf protocol and selecting USB and/or SDIO will include the bcdc protocol. The PCIe kconfig option assures the dependencies for msgbuf are met, ie. HAS_DMA. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15brcmfmac: Fix memory leak and missing assignment.Hante Meuleman
The function brcmf_enable_bw40_2g contains a memory leak. The function is also missing initialisation of one of the members of ch struct, which can lead to warning but this has no impact on result. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15net: fix creation adjacent device symlinksAlexander Y. Fomichev
__netdev_adjacent_dev_insert may add adjust device of different net namespace, without proper check it leads to emergence of broken sysfs links from/to devices in another namespace. Fix: rewrite netdev_adjacent_is_neigh_list macro as a function, move net_eq check into netdev_adjacent_is_neigh_list. (thanks David) related to: 4c75431ac3520631f1d9e74aa88407e6374dbbc4 Signed-off-by: Alexander Fomichev <git.user@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15net/phy: micrel: Disable asymmetric pause for KSZ9031Mike Looijmans
The KSZ9031 appears to suffer from the same hardware bug as described for the KSZ9021 in commit 32fcafbcd1c9f6c7013016a22a5369b4acb93577 ("net/phy: micrel: Disable asymmetric pause for KSZ9021") you have to unplug the cable and plug it back to get it to work. Remove the SUPPORTED_Asym_Pause flag for the KSZ9031 to fix this. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13Merge branch 'bridge_vlan_filtering'David S. Miller
Vladislav Yasevich says: ==================== bridge: Two small fixes to vlan filtering code. This series corrects 2 small issues that I've ran across recently while doing more work with vlan filtering changes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13bridge: Allow clearing of pvid and untagged bitmapVlad Yasevich
Currently, it is possible to modify the vlan filter configuration to add pvid or untagged support. For example: bridge vlan add vid 10 dev eth0 bridge vlan add vid 10 dev eth0 untagged pvid The second statement will modify vlan 10 to include untagged and pvid configuration. However, it is currently impossible to go backwards bridge vlan add vid 10 dev eth0 untagged pvid bridge vlan add vid 10 dev eth0 Here nothing happens. This patch correct this so that any modifiers not supplied are removed from the configuration. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13bridge: Check if vlan filtering is enabled only once.Vlad Yasevich
The bridge code checks if vlan filtering is enabled on both ingress and egress. When the state flip happens, it is possible for the bridge to currently be forwarding packets and forwarding behavior becomes non-deterministic. Bridge may drop packets on some interfaces, but not others. This patch solves this by caching the filtered state of the packet into skb_cb on ingress. The skb_cb is guaranteed to not be over-written between the time packet entres bridge forwarding path and the time it leaves it. On egress, we can then check the cached state to see if we need to apply filtering information. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13bonding: fix div by zero while enslaving and transmittingNikolay Aleksandrov
The problem is that the slave is first linked and slave_cnt is incremented afterwards leading to a div by zero in the modes that use it as a modulus. What happens is that in bond_start_xmit() bond_has_slaves() is used to evaluate further transmission and it becomes true after the slave is linked in, but when slave_cnt is used in the xmit path it is still 0, so fetch it once and transmit based on that. Since it is used only in round-robin and XOR modes, the fix is only for them. Thanks to Eric Dumazet for pointing out the fault in my first try to fix this. Call trace (took it out of net-next kernel, but it's the same with net): [46934.330038] divide error: 0000 [#1] SMP [46934.330041] Modules linked in: bonding(O) 9p fscache snd_hda_codec_generic crct10dif_pclmul [46934.330041] bond0: Enslaving eth1 as an active interface with an up link [46934.330051] ppdev joydev crc32_pclmul crc32c_intel 9pnet_virtio ghash_clmulni_intel snd_hda_intel 9pnet snd_hda_controller parport_pc serio_raw pcspkr snd_hda_codec parport virtio_balloon virtio_console snd_hwdep snd_pcm pvpanic i2c_piix4 snd_timer i2ccore snd soundcore virtio_blk virtio_net virtio_pci virtio_ring virtio ata_generic pata_acpi floppy [last unloaded: bonding] [46934.330053] CPU: 1 PID: 3382 Comm: ping Tainted: G O 3.17.0-rc4+ #27 [46934.330053] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [46934.330054] task: ffff88005aebf2c0 ti: ffff88005b728000 task.ti: ffff88005b728000 [46934.330059] RIP: 0010:[<ffffffffa0198c33>] [<ffffffffa0198c33>] bond_start_xmit+0x1c3/0x450 [bonding] [46934.330060] RSP: 0018:ffff88005b72b7f8 EFLAGS: 00010246 [46934.330060] RAX: 0000000000000679 RBX: ffff88004b077000 RCX: 000000000000002a [46934.330061] RDX: 0000000000000000 RSI: ffff88004b3f0500 RDI: ffff88004b077940 [46934.330061] RBP: ffff88005b72b830 R08: 00000000000000c0 R09: ffff88004a83e000 [46934.330062] R10: 000000000000ffff R11: ffff88004b1f12c0 R12: ffff88004b3f0500 [46934.330062] R13: ffff88004b3f0500 R14: 000000000000002a R15: ffff88004b077940 [46934.330063] FS: 00007fbd91a4c740(0000) GS:ffff88005f080000(0000) knlGS:0000000000000000 [46934.330064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [46934.330064] CR2: 00007f803a8bb000 CR3: 000000004b2c9000 CR4: 00000000000406e0 [46934.330069] Stack: [46934.330071] ffffffff811e6169 00000000e772fa05 ffff88004b077000 ffff88004b3f0500 [46934.330072] ffffffff81d17d18 000000000000002a 0000000000000000 ffff88005b72b8a0 [46934.330073] ffffffff81620108 ffffffff8161fe0e ffff88005b72b8c4 ffff88005b302000 [46934.330073] Call Trace: [46934.330077] [<ffffffff811e6169>] ? __kmalloc_node_track_caller+0x119/0x300 [46934.330084] [<ffffffff81620108>] dev_hard_start_xmit+0x188/0x410 [46934.330086] [<ffffffff8161fe0e>] ? harmonize_features+0x2e/0x90 [46934.330088] [<ffffffff81620b06>] __dev_queue_xmit+0x456/0x590 [46934.330089] [<ffffffff81620c50>] dev_queue_xmit+0x10/0x20 [46934.330090] [<ffffffff8168f022>] arp_xmit+0x22/0x60 [46934.330091] [<ffffffff8168f090>] arp_send.part.16+0x30/0x40 [46934.330092] [<ffffffff8168f1e5>] arp_solicit+0x115/0x2b0 [46934.330094] [<ffffffff8160b5d7>] ? copy_skb_header+0x17/0xa0 [46934.330096] [<ffffffff8162875a>] neigh_probe+0x4a/0x70 [46934.330097] [<ffffffff8162979c>] __neigh_event_send+0xac/0x230 [46934.330098] [<ffffffff8162a00b>] neigh_resolve_output+0x13b/0x220 [46934.330100] [<ffffffff8165f120>] ? ip_forward_options+0x1c0/0x1c0 [46934.330101] [<ffffffff81660478>] ip_finish_output+0x1f8/0x860 [46934.330102] [<ffffffff81661f08>] ip_output+0x58/0x90 [46934.330103] [<ffffffff81661602>] ? __ip_local_out+0xa2/0xb0 [46934.330104] [<ffffffff81661640>] ip_local_out_sk+0x30/0x40 [46934.330105] [<ffffffff81662a66>] ip_send_skb+0x16/0x50 [46934.330106] [<ffffffff81662ad3>] ip_push_pending_frames+0x33/0x40 [46934.330107] [<ffffffff8168854c>] raw_sendmsg+0x88c/0xa30 [46934.330110] [<ffffffff81612b31>] ? skb_recv_datagram+0x41/0x60 [46934.330111] [<ffffffff816875a9>] ? raw_recvmsg+0xa9/0x1f0 [46934.330113] [<ffffffff816978d4>] inet_sendmsg+0x74/0xc0 [46934.330114] [<ffffffff81697a9b>] ? inet_recvmsg+0x8b/0xb0 [46934.330115] bond0: Adding slave eth2 [46934.330116] [<ffffffff8160357c>] sock_sendmsg+0x9c/0xe0 [46934.330118] [<ffffffff81603248>] ? move_addr_to_kernel.part.20+0x28/0x80 [46934.330121] [<ffffffff811b4477>] ? might_fault+0x47/0x50 [46934.330122] [<ffffffff816039b9>] ___sys_sendmsg+0x3a9/0x3c0 [46934.330125] [<ffffffff8144a14a>] ? n_tty_write+0x3aa/0x530 [46934.330127] [<ffffffff810d1ae4>] ? __wake_up+0x44/0x50 [46934.330129] [<ffffffff81242b38>] ? fsnotify+0x238/0x310 [46934.330130] [<ffffffff816048a1>] __sys_sendmsg+0x51/0x90 [46934.330131] [<ffffffff816048f2>] SyS_sendmsg+0x12/0x20 [46934.330134] [<ffffffff81738b29>] system_call_fastpath+0x16/0x1b [46934.330144] Code: 48 8b 10 4c 89 ee 4c 89 ff e8 aa bc ff ff 31 c0 e9 1a ff ff ff 0f 1f 00 4c 89 ee 4c 89 ff e8 65 fb ff ff 31 d2 4c 89 ee 4c 89 ff <f7> b3 64 09 00 00 e8 02 bd ff ff 31 c0 e9 f2 fe ff ff 0f 1f 00 [46934.330146] RIP [<ffffffffa0198c33>] bond_start_xmit+0x1c3/0x450 [bonding] [46934.330146] RSP <ffff88005b72b7f8> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> Fixes: 278b208375 ("bonding: initial RCU conversion") Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13Merge branch 'r8169-net'David S. Miller
Hayes Wang says: ==================== r8169: fix rx vlan There are two issues for hw rx vlan. The patches are used to fix them. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13r8169: fix setting rx vlanhayeswang
The setting should depend on the new features not the current one. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13r8169: fix the default setting of rx vlanhayeswang
If the parameter "features" of __rtl8169_set_features() is equal to dev->features, the variable "changed" is alwayes 0, and nothing would be changed. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13drivers: net: cpsw: dual_emac: in suspend/resume bring down/up all the netdevMugunthan V N
During suspend and resume in Dual EMAC, second port is not working as in suspend/resume only the first slave netdev is closed and opened. So bring down and up all the interfaces that are up during suspend/resume. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12drivers: net: b44: Fix typo in returning multicast statsMark Einon
nstat->multicast refers to received packets, not transmitted as is returned here. Change it so that received packet stats are given. Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12Merge tag 'master-2014-09-11' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-09-11 Please pull this batch of fixes intended for the 3.17 stream: For the mac80211 bits, Johannes says: "Two more fixes for mac80211 - one of them addresses a long-standing issue that we only found when using vendor events more frequently; the other addresses some bad information being reported in userspace that people were starting to actually look at." For the iwlwifi bits, Emmanuel says: "I re-enable scheduled scan on firmware that contain the fix for the bug that Linus reported. A few trivial fixes: endianity issues, the same DTIM period fix that I did in mac80211. Eyal fixes a few issues we identified with EAPOL, we now send them just as if they were management frames, this solves interrop issues. Johannes has another set of trivial fixes, while Luca fixes the way we configure the filters in the firmware. Last but not least, a new device is added by Oren." Emmanuel was traveling, resulting in his pull to be a bit larger than I would have liked to see at this point. FWIW, I have asked Emmanuel to be much more strict for any more pull requests in this cycle. In addition to the above, Sujith Manoharan reverts an earlier ath9k patch. The earlier change was found to allow for the device to sleep too long and miss beacons. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12Merge tag 'linux-can-fixes-for-3.17-20140911' of ↵David S. Miller
git://gitorious.org/linux-can/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2014-09-11 this is a pull request for the current release cycle of a single patch. The patch by David Jander fixes a scheduling while atomic problem in the flexcan driver, that was introduced by me in v3.14-rc6. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12ipv6: clean up anycast when an interface is destroyedSabrina Dubroca
If we try to rmmod the driver for an interface while sockets with setsockopt(JOIN_ANYCAST) are alive, some refcounts aren't cleaned up and we get stuck on: unregister_netdevice: waiting for ens3 to become free. Usage count = 1 If we LEAVE_ANYCAST/close everything before rmmod'ing, there is no problem. We need to perform a cleanup similar to the one for multicast in addrconf_ifdown(how == 1). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-06 03:23:04 +0000