Age | Commit message (Collapse) | Author |
|
Pull io_uring fixes from Jens Axboe:
"A small collection of small fixes that should go into this release:
- Two fixes for async request preparation (Pavel)
- Busy clear fix for SQPOLL (Xiaoguang)
- Don't use kiocb->private for O_DIRECT buf index, some file systems
use it (Bijan)
- Kill dead check in io_splice()
- Ensure sqo_wait is initialized early
- Cancel task_work if we fail adding to original process
- Only add (IO)pollable requests to iopoll list, fixing a regression
in this merge window"
* tag 'io_uring-5.7-2020-05-22' of git://git.kernel.dk/linux-block:
io_uring: reset -EBUSY error when io sq thread is waken up
io_uring: don't add non-IO requests to iopoll pending list
io_uring: don't use kiocb.private to store buf_index
io_uring: cancel work if task_work_add() fails
io_uring: remove dead check in io_splice()
io_uring: fix FORCE_ASYNC req preparation
io_uring: don't prepare DRAIN reqs twice
io_uring: initialize ctx->sqo_wait earlier
|
|
Pull block fixes from Jens Axboe:
"Two fixes for null_blk zone mode"
* tag 'block-5.7-2020-05-22' of git://git.kernel.dk/linux-block:
null_blk: don't allow discard for zoned mode
null_blk: return error for invalid zone size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"Two fixes:
- Another !MMU build fix that was a straggler from last week
- A fix to use the "register" keyword for the GP global register
variable"
* tag 'riscv-for-linus-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: gp_in_global needs register keyword
riscv: Fix print_vm_layout build error if NOMMU
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Bring the PTRACE_SYSEMU semantics in line with the man page.
- Annotate variable assignment in get_user() with the type to avoid
sparse warnings.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add get_user() type annotation on the !access_ok() path
arm64: Fix PTRACE_SYSEMU semantics
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few small fixes: the only significant one is a slight
improvement for PCM running position update with no-period-elapsed
case while the rest are HD-audio fixups and ice1712 model quirk"
* tag 'sound-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Add more fixup entries for Clevo machines
ALSA: iec1712: Initialize STDSP24 properly when using the model=staudio option
ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Xtreme
ALSA: pcm: fix incorrect hw_base increase
|
|
Sparse reports "Using plain integer as NULL pointer" when the arm64
__get_user_error() assigns 0 to a pointer type. Use proper type
annotation.
Signed-of-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: kbuild test robot <lkp@intel.com>
Link: http://lkml.kernel.org/r/20200522142321.GP23230@ZenIV.linux.org.uk
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- a revert of a recent change to the PTE bits for 32-bit BookS, which
broke swap.
- a "fix" to disable STRICT_KERNEL_RWX for 64-bit in Kconfig, as it's
causing crashes for some people.
Thanks to Christophe Leroy and Rui Salvaterra.
* tag 'powerpc-5.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Disable STRICT_KERNEL_RWX
Revert "powerpc/32s: reorder Linux PTE bits to better match Hash PTE bits."
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor bug fixes from John Johansen:
- Fix use-after-free in aa_audit_rule_init
- Fix refcnt leak in policy_update
- Fix potential label refcnt leak in aa_change_profile
* tag 'apparmor-pr-2020-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: Fix use-after-free in aa_audit_rule_init
apparmor: Fix aa_label refcnt leak in policy_update
apparmor: fix potential label refcnt leak in aa_change_profile
|
|
As Ubuntu and Fedora release new version used kernel version equal to or
higher than v5.4, They started to support kernel exfat filesystem.
Linus reported a mount error with new version of exfat on Fedora:
exfat: Unknown parameter 'namecase'
This is because there is a difference in mount option between old
staging/exfat and new exfat. And utf8, debug, and codepage options as
well as namecase have been removed from new exfat.
This patch add the dummy mount options as deprecated option to be
backward compatible with old one.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the implementation of aa_audit_rule_init(), when aa_label_parse()
fails the allocated memory for rule is released using
aa_audit_rule_free(). But after this release, the return statement
tries to access the label field of the rule which results in
use-after-free. Before releasing the rule, copy errNo and return it
after release.
Fixes: 52e8c38001d8 ("apparmor: Fix memory leak of rule on error exit path")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
policy_update() invokes begin_current_label_crit_section(), which
returns a reference of the updated aa_label object to "label" with
increased refcount.
When policy_update() returns, "label" becomes invalid, so the refcount
should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
policy_update(). When aa_may_manage_policy() returns not NULL, the
refcnt increased by begin_current_label_crit_section() is not decreased,
causing a refcnt leak.
Fix this issue by jumping to "end_section" label when
aa_may_manage_policy() returns not NULL.
Fixes: 5ac8c355ae00 ("apparmor: allow introspecting the loaded policy pre internal transform")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
aa_change_profile() invokes aa_get_current_label(), which returns
a reference of the current task's label.
According to the comment of aa_get_current_label(), the returned
reference must be put with aa_put_label().
However, when the original object pointed by "label" becomes
unreachable because aa_change_profile() returns or a new object
is assigned to "label", reference count increased by
aa_get_current_label() is not decreased, causing a refcnt leak.
Fix this by calling aa_put_label() before aa_change_profile() return
and dropping unnecessary aa_get_current_label().
Fixes: 9fcf78cca198 ("apparmor: update domain transitions that are subsets of confinement at nnp")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
The Intel kernel build robot recently pointed out that I missed the
register keyword on this one when I refactored the code to remove local
register variables (which aren't supported by LLVM). GCC's manual
indicates that global register variables must have the register keyword,
As far as I can tell lacking the register keyword causes GCC to ignore
the __asm__ and treat this as a regular variable, but I'm not sure how
that didn't show up as some sort of failure.
Fixes: 52e7c52d2ded ("RISC-V: Stop relying on GCC's register allocator's hueristics")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Pull virtio fixes from Michael Tsirkin:
"Fix a couple of build warnings"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: missing __user tags
vdpasim: remove unused variable 'ret'
|
|
git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Some driver fixes:
- dmatest restoration of defaults
- tegra210-adma probe handling fix
- k3-udma flags fixed for slave_sg and memcpy
- list fix for zynqmp_dma
- idxd interrupt completion fix
- lock fix for owl"
* tag 'dmaengine-fix-5.7-rc7' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: tegra210-adma: Fix an error handling path in 'tegra_adma_probe()'
dmaengine: ti: k3-udma: Fix TR mode flags for slave_sg and memcpy
dmaengine: zynqmp_dma: Move list_del inside zynqmp_dma_free_descriptor.
dmaengine: dmatest: Restore default for channel
dmaengine: idxd: fix interrupt completion after unmasking
dmaengine: owl: Use correct lock in owl_dma_get_pchan()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix regression in ext4's FIEMAP handling introduced in v5.7-rc1"
* tag 'fiemap-regression-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix fiemap size checks for bitmap files
ext4: fix EXT4_MAX_LOGICAL_BLOCK macro
|
|
Zoned block device specification do not define the behavior of
discard/trim command as this command is generally replaced by the reset
write pointer (zone reset) command. Emulate this in null_blk by making
zoned and discard options mutually exclusive.
Suggested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In null_init_zone_dev() check if the zone size is larger than device
capacity, return error if needed.
This also fixes the following oops :-
null_blk: changed the number of conventional zones to 4294967295
BUG: kernel NULL pointer dereference, address: 0000000000000010
PGD 7d76c5067 P4D 7d76c5067 PUD 7d240c067 PMD 0
Oops: 0002 [#1] SMP NOPTI
CPU: 4 PID: 5508 Comm: nullbtests.sh Tainted: G OE 5.7.0-rc4lblk-fnext0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e4
RIP: 0010:null_init_zoned_dev+0x17a/0x27f [null_blk]
RSP: 0018:ffffc90007007e00 EFLAGS: 00010246
RAX: 0000000000000020 RBX: ffff8887fb3f3c00 RCX: 0000000000000007
RDX: 0000000000000000 RSI: ffff8887ca09d688 RDI: ffff888810fea510
RBP: 0000000000000010 R08: ffff8887ca09d688 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8887c26e8000
R13: ffffffffa05e9390 R14: 0000000000000000 R15: 0000000000000001
FS: 00007fcb5256f740(0000) GS:ffff888810e00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000081e8fe000 CR4: 00000000003406e0
Call Trace:
null_add_dev+0x534/0x71b [null_blk]
nullb_device_power_store.cold.41+0x8/0x2e [null_blk]
configfs_write_file+0xe6/0x150
vfs_write+0xba/0x1e0
ksys_write+0x5f/0xe0
do_syscall_64+0x60/0x250
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x7fcb51c71840
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Several strange crashes have been eventually traced back to
STRICT_KERNEL_RWX and its interaction with code patching.
Various paths in our ftrace, kprobes and other patching code need to
be hardened against patching failures, otherwise we can end up running
with partially/incorrectly patched ftrace paths, kprobes or jump
labels, which can then cause strange crashes.
Although fixes for those are in development, they're not -rc material.
There also seem to be problems with the underlying strict RWX logic,
which needs further debugging.
So for now disable STRICT_KERNEL_RWX on 64-bit to prevent people from
enabling the option and tripping over the bugs.
Fixes: 1e0fc9d1eb2b ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520133605.972649-1-mpe@ellerman.id.au
|
|
arch/riscv/mm/init.c: In function ‘print_vm_layout’:
arch/riscv/mm/init.c:68:37: error: ‘FIXADDR_START’ undeclared (first use in this function);
arch/riscv/mm/init.c:69:20: error: ‘FIXADDR_TOP’ undeclared
arch/riscv/mm/init.c:70:37: error: ‘PCI_IO_START’ undeclared
arch/riscv/mm/init.c:71:20: error: ‘PCI_IO_END’ undeclared
arch/riscv/mm/init.c:72:38: error: ‘VMEMMAP_START’ undeclared
arch/riscv/mm/init.c:73:20: error: ‘VMEMMAP_END’ undeclared (first use in this function);
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Richard Weinberger:
- Fix a PM regression in brcmnand driver
- Propagate ECC information correctly on SPI-NAND
- Make sure no MTD name is used multiple time in nvmem
* tag 'fixes-for-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd:rawnand: brcmnand: Fix PM resume crash
mtd: Fix mtd not registered due to nvmem name collision
mtd: spinand: Propagate ECC information to the MTD structure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS fixes from Richard Weinberger:
- Correctly set next cursor for detailed_erase_block_info debugfs file
- Don't use crypto_shash_descsize() for digest size in UBIFS
- Remove broken lazytime support from UBIFS
* tag 'for-linus-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: Fix seq_file usage in detailed_erase_block_info debugfs file
ubifs: fix wrong use of crypto_shash_descsize()
ubifs: remove broken lazytime support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML fixes from Richard Weinberger:
- Two missing includes which caused build issues on recent systems
- Correctly set TRANS_GRE_LEN in our vector network driver
* tag 'for-linus-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Fix typo in vector driver transport option definition
um: syscall.c: include <asm/unistd.h>
um: Fix xor.h include
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"This makes a recently introduced suspend-to-idle wakeup issue on Dell
XPS13 9360 go away"
* tag 'pm-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: PM: Avoid flushing EC work when EC GPE is inactive
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix two bugs introduced in this cycle and one introduced in v5.5"
* tag 'ovl-fixes-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: potential crash in ovl_fid_to_fh()
ovl: clear ATTR_OPEN from attr->ia_valid
ovl: clear ATTR_FILE from attr->ia_valid
|
|
syzbot is reporting that splice()ing from non-empty read side to
already-full write side causes unkillable task, for opipe_prep() is by
error not inverting pipe_full() test.
CPU: 0 PID: 9460 Comm: syz-executor.5 Not tainted 5.6.0-rc3-next-20200228-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:rol32 include/linux/bitops.h:105 [inline]
RIP: 0010:iterate_chain_key kernel/locking/lockdep.c:369 [inline]
RIP: 0010:__lock_acquire+0x6a3/0x5270 kernel/locking/lockdep.c:4178
Call Trace:
lock_acquire+0x197/0x420 kernel/locking/lockdep.c:4720
__mutex_lock_common kernel/locking/mutex.c:956 [inline]
__mutex_lock+0x156/0x13c0 kernel/locking/mutex.c:1103
pipe_lock_nested fs/pipe.c:66 [inline]
pipe_double_lock+0x1a0/0x1e0 fs/pipe.c:104
splice_pipe_to_pipe fs/splice.c:1562 [inline]
do_splice+0x35f/0x1520 fs/splice.c:1141
__do_sys_splice fs/splice.c:1447 [inline]
__se_sys_splice fs/splice.c:1427 [inline]
__x64_sys_splice+0x2b5/0x320 fs/splice.c:1427
do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Reported-by: syzbot+b48daca8639150bc5e73@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=9386d051e11e09973d5a4cf79af5e8cedf79386d
Fixes: 8cefc107ca54c8b0 ("pipe: Use head and tail pointers for the ring, not cursor and length")
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In io_sq_thread(), currently if we get an -EBUSY error and go to sleep,
we will won't clear it again, which will result in io_sq_thread() will
never have a chance to submit sqes again. Below test program test.c
can reveal this bug:
int main(int argc, char *argv[])
{
struct io_uring ring;
int i, fd, ret;
struct io_uring_sqe *sqe;
struct io_uring_cqe *cqe;
struct iovec *iovecs;
void *buf;
struct io_uring_params p;
if (argc < 2) {
printf("%s: file\n", argv[0]);
return 1;
}
memset(&p, 0, sizeof(p));
p.flags = IORING_SETUP_SQPOLL;
ret = io_uring_queue_init_params(4, &ring, &p);
if (ret < 0) {
fprintf(stderr, "queue_init: %s\n", strerror(-ret));
return 1;
}
fd = open(argv[1], O_RDONLY | O_DIRECT);
if (fd < 0) {
perror("open");
return 1;
}
iovecs = calloc(10, sizeof(struct iovec));
for (i = 0; i < 10; i++) {
if (posix_memalign(&buf, 4096, 4096))
return 1;
iovecs[i].iov_base = buf;
iovecs[i].iov_len = 4096;
}
ret = io_uring_register_files(&ring, &fd, 1);
if (ret < 0) {
fprintf(stderr, "%s: register %d\n", __FUNCTION__, ret);
return ret;
}
for (i = 0; i < 10; i++) {
sqe = io_uring_get_sqe(&ring);
if (!sqe)
break;
io_uring_prep_readv(sqe, 0, &iovecs[i], 1, 0);
sqe->flags |= IOSQE_FIXED_FILE;
ret = io_uring_submit(&ring);
sleep(1);
printf("submit %d\n", i);
}
for (i = 0; i < 10; i++) {
io_uring_wait_cqe(&ring, &cqe);
printf("receive: %d\n", i);
if (cqe->res != 4096) {
fprintf(stderr, "ret=%d, wanted 4096\n", cqe->res);
ret = 1;
}
io_uring_cqe_seen(&ring, cqe);
}
close(fd);
io_uring_queue_exit(&ring);
return 0;
}
sudo ./test testfile
above command will hang on the tenth request, to fix this bug, when io
sq_thread is waken up, we reset the variable 'ret' to be zero.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 697ece78f8f749aeea40f2711389901f0974017a.
The implementation of SWAP on powerpc requires page protection
bits to not be one of the least significant PTE bits.
Until the SWAP implementation is changed and this requirement voids,
we have to keep at least _PAGE_RW outside of the 3 last bits.
For now, revert to previous PTE bits order. A further rework
may come later.
Fixes: 697ece78f8f7 ("powerpc/32s: reorder Linux PTE bits to better match Hash PTE bits.")
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b34706f8de87f84d135abb5f3ede6b6f16fb1f41.1589969799.git.christophe.leroy@csgroup.eu
|
|
Quoth the man page:
```
If the tracee was restarted by PTRACE_SYSCALL or PTRACE_SYSEMU, the
tracee enters syscall-enter-stop just prior to entering any system
call (which will not be executed if the restart was using
PTRACE_SYSEMU, regardless of any change made to registers at this
point or how the tracee is restarted after this stop).
```
The parenthetical comment is currently true on x86 and powerpc,
but not currently true on arm64. arm64 re-checks the _TIF_SYSCALL_EMU
flag after the syscall entry ptrace stop. However, at this point,
it reflects which method was used to re-start the syscall
at the entry stop, rather than the method that was used to reach it.
Fix that by recording the original flag before performing the ptrace
stop, bringing the behavior in line with documentation and x86/powerpc.
Fixes: f086f67485c5 ("arm64: ptrace: add support for syscall emulation")
Cc: <stable@vger.kernel.org> # 5.3.x-
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Bin Lu <Bin.Lu@arm.com>
[catalin.marinas@arm.com: moved 'flags' bit masking]
[catalin.marinas@arm.com: changed 'flags' type to unsigned long]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We normally disable any commands that aren't specifically poll commands
for a ring that is setup for polling, but we do allow buffer provide and
remove commands to support buffer selection for polled IO. Once a
request is issued, we add it to the poll list to poll for completion. But
we should not do that for non-IO commands, as those request complete
inline immediately and aren't pollable. If we do, we can leave requests
on the iopoll list after they are freed.
Fixes: ddf0322db79c ("io_uring: add IORING_OP_PROVIDE_BUFFERS")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull vfs fix from Al Viro:
"Stable fodder fix: copy_fdtable() would get screwed on 64bit boxen
with sysctl_nr_open raised to 512M or higher, which became possible
since 2.6.25.
Nobody sane would set the things up that way, but..."
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix multiplication overflow in copy_fdtable()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- fix recent DSP code regression on ARC700 platforms
- fix thinkos in ICCM/DCCM size checks
- USB regression fix
- other small fixes here and there
* tag 'arc-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: show_regs: avoid extra line of output
ARC: guard dsp early init against non ARCv2
ARC: [plat-eznps]: Restrict to CONFIG_ISA_ARCOMPACT
ARC: entry: comment
arc: remove #ifndef CONFIG_AS_CFI_SIGNAL_FRAME
arc: ptrace: hard-code "arc" instead of UTS_MACHINE
ARC: [plat-hsdk]: fix USB regression
ARC: Fix ICCM & DCCM runtime size checks
|
|
cpy and set really should be size_t; we won't get an overflow on that,
since sysctl_nr_open can't be set above ~(size_t)0 / sizeof(void *),
so nr that would've managed to overflow size_t on that multiplication
won't get anywhere near copy_fdtable() - we'll fail with EMFILE
before that.
Cc: stable@kernel.org # v2.6.25+
Fixes: 9cfe015aa424 (get rid of NR_OPEN and introduce a sysctl_nr_open)
Reported-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
kiocb.private is used in iomap_dio_rw() so store buf_index separately.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Move 'buf_index' to a hole in io_kiocb.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add an extra validation of the len parameter, as for ext4 some files
might have smaller file size limits than others. This also means the
redundant size check in ext4_ioctl_get_es_cache can go away, as all
size checking is done in the shared fiemap handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200505154324.3226743-3-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4 supports max number of logical blocks in a file to be 0xffffffff.
(This is since ext4_extent's ee_block is __le32).
This means that EXT4_MAX_LOGICAL_BLOCK should be 0xfffffffe (starting
from 0 logical offset). This patch fixes this.
The issue was seen when ext4 moved to iomap_fiemap API and when
overlayfs was mounted on top of ext4. Since overlayfs was missing
filemap_check_ranges(), so it could pass a arbitrary huge length which
lead to overflow of map.m_len logic.
This patch fixes that.
Fixes: d3b6f23f7167 ("ext4: move ext4_fiemap to use iomap framework")
Reported-by: syzbot+77fa5bdb65cc39711820@syzkaller.appspotmail.com
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200505154324.3226743-2-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A set of driver and core fixes as well as MAINTAINER update"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: add maintainer for mediatek i2c controller driver
i2c: mux: Replace zero-length array with flexible-array
i2c: mux: demux-pinctrl: Fix an error handling path in 'i2c_demux_pinctrl_probe()'
i2c: altera: Fix race between xfer_msg and isr thread
i2c: algo-pca: update contact email
i2c: at91: Fix pinmux after devm_gpiod_get() for bus recovery
i2c: use my kernel.org address from now on
i2c: fix missing pm_runtime_put_sync in i2c_device_probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fix from Wei Liu:
"One patch from Vitaly to fix reenlightenment notifications"
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Properly suspend/resume reenlightenment notifications
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"All related to the AMD IOMMU driver:
- ACPI table parser fix to correctly read the UID of ACPI devices
- ACPI UID device matching fix
- Fix deferred device attachment to a domain in kdump kernels when
the IOMMU driver uses the dma-iommu DMA-API implementation"
* tag 'iommu-fixes-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix deferred domain attachment
iommu/amd: Fix get_acpihid_device_id()
iommu/amd: Fix over-read of ACPI UID from IVRS table
|
|
I don't see what security concern is addressed by obfuscating NULL
and IS_ERR() error pointers, printed with %p/%pK. Given the number
of sites where %p is used (over 10000) and the fact that NULL pointers
aren't uncommon, it probably wouldn't take long for an attacker to
find the hash that corresponds to 0. Although harder, the same goes
for most common error values, such as -1, -2, -11, -14, etc.
The NULL part actually fixes a regression: NULL pointers weren't
obfuscated until commit 3e5903eb9cff ("vsprintf: Prevent crash when
dereferencing invalid pointers") which went into 5.2. I'm tacking
the IS_ERR() part on here because error pointers won't leak kernel
addresses and printing them as pointers shouldn't be any different
from e.g. %d with PTR_ERR_OR_ZERO(). Obfuscating them just makes
debugging based on existing pr_debug and friends excruciating.
Note that the "always print 0's for %pK when kptr_restrict == 2"
behaviour which goes way back is left as is.
Example output with the patch applied:
ptr error-ptr NULL
%p: 0000000001f8cc5b fffffffffffffff2 0000000000000000
%pK, kptr = 0: 0000000001f8cc5b fffffffffffffff2 0000000000000000
%px: ffff888048c04020 fffffffffffffff2 0000000000000000
%pK, kptr = 1: ffff888048c04020 fffffffffffffff2 0000000000000000
%pK, kptr = 2: 0000000000000000 0000000000000000 0000000000000000
Fixes: 3e5903eb9cff ("vsprintf: Prevent crash when dereferencing invalid pointers")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit b53611fb1ce9 ("dmaengine: tegra210-adma: Fix crash during probe")
has moved some code in the probe function and reordered the error handling
path accordingly.
However, a goto has been missed.
Fix it and goto the right label if 'dma_async_device_register()' fails, so
that all resources are released.
Fixes: b53611fb1ce9 ("dmaengine: tegra210-adma: Fix crash during probe")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200516214205.276266-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The IOMMU core code has support for deferring the attachment of a domain
to a device. This is needed in kdump kernels where the new domain must
not be attached to a device before the device driver takes it over.
When the AMD IOMMU driver got converted to use the dma-iommu
implementation, the deferred attaching got lost. The code in
dma-iommu.c has support for deferred attaching, but it calls into
iommu_attach_device() to actually do it. But iommu_attach_device()
will check if the device should be deferred in it code-path and do
nothing, breaking deferred attachment.
Move the is_deferred_attach() check out of the attach_device path and
into iommu_group_add_device() to make deferred attaching work from the
dma-iommu code.
Fixes: 795bbbb9b6f8 ("iommu/dma-iommu: Handle deferred devices")
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Tom Murphy <murphyt7@tcd.ie>
Cc: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200519130340.14564-1-joro@8bytes.org
|
|
This change fixes crash observed on PM resume. This bug
was introduced in the change made for flash-edu support.
Fixes: a5d53ad26a8b ("mtd: rawnand: brcmnand: Add support for flash-edu for dma transfers")
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
A few known Clevo machines (PC50, PC70, X170) with ALC1220 codec need
the existing quirk for pins for PB51 and co.
Signed-off-by: PeiSen Hou <pshou@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200519065012.13119-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When the nvmem framework is enabled, a nvmem device is created per mtd
device/partition.
It is not uncommon that a device can have multiple mtd devices with
partitions that have the same name. Eg, when there DT overlay is allowed
and the same device with mtd is attached twice.
Under that circumstances, the mtd fails to register due to a name
duplication on the nvmem framework.
With this patch we use the mtdX name instead of the partition name,
which is unique.
[ 8.948991] sysfs: cannot create duplicate filename '/bus/nvmem/devices/Production Data'
[ 8.948992] CPU: 7 PID: 246 Comm: systemd-udevd Not tainted 5.5.0-qtec-standard #13
[ 8.948993] Hardware name: AMD Dibbler/Dibbler, BIOS 05.22.04.0019 10/26/2019
[ 8.948994] Call Trace:
[ 8.948996] dump_stack+0x50/0x70
[ 8.948998] sysfs_warn_dup.cold+0x17/0x2d
[ 8.949000] sysfs_do_create_link_sd.isra.0+0xc2/0xd0
[ 8.949002] bus_add_device+0x74/0x140
[ 8.949004] device_add+0x34b/0x850
[ 8.949006] nvmem_register.part.0+0x1bf/0x640
...
[ 8.948926] mtd mtd8: Failed to register NVMEM device
Fixes: c4dfa25ab307 ("mtd: add support for reading MTD devices via the nvmem API")
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This is done by default in the raw NAND core (nand_base.c) but was
missing in the SPI-NAND core. Without these two lines the ecc_strength
and ecc_step_size values are not exported to the user through sysfs.
Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"A couple of miscellaneous bug fixes for the integrity subsystem:
IMA:
- Properly modify the open flags in order to calculate the file hash.
- On systems requiring the IMA policy to be signed, the policy is
loaded differently. Don't differentiate between "enforce" and
either "log" or "fix" modes how the policy is loaded.
EVM:
- Two patches to fix an EVM race condition, normally the result of
attempting to load an unsupported hash algorithm.
- Use the lockless RCU version for walking an append only list"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
evm: Fix a small race in init_desc()
evm: Fix RCU list related warnings
ima: Fix return value of ima_write_policy()
evm: Check also if *tfm is an error pointer in init_desc()
ima: Set file->f_mode instead of file->f_flags in ima_calc_file_hash()
|
|
The ST Audio ADCIII is an STDSP24 card plus extension box. With commit
e8a91ae18bdc ("ALSA: ice1712: Add support for STAudio ADCIII") we
enabled the ADCIII ports using the model=staudio option but forgot
this part to ensure the STDSP24 card is initialized properly.
Fixes: e8a91ae18bdc ("ALSA: ice1712: Add support for STAudio ADCIII")
Signed-off-by: Scott Bahling <sbahling@suse.com>
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1048934
Link: https://lore.kernel.org/r/20200518175728.28766-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Fix potential memory leak in exfat_find
- Set exfat's splice_write to iter_file_splice_write to fix a splice
failure on direct-opened files
* tag 'for-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: fix possible memory leak in exfat_find()
exfat: use iter_file_splice_write
|
|
Don't call req->page_done() on each page as we finish filling it with
the data coming from the network. Whilst this might speed up the
application a bit, it's a problem if there's a network failure and the
operation has to be reissued.
If this happens, an oops occurs because afs_readpages_page_done() clears
the pointer to each page it unlocks and when a retry happens, the
pointers to the pages it wants to fill are now NULL (and the pages have
been unlocked anyway).
Instead, wait till the operation completes successfully and only then
release all the pages after clearing any terminal gap (the server can
give us less data than we requested as we're allowed to ask for more
than is available).
KASAN produces a bug like the following, and even without KASAN, it can
oops and panic.
BUG: KASAN: wild-memory-access in _copy_to_iter+0x323/0x5f4
Write of size 1404 at addr 0005088000000000 by task md5sum/5235
CPU: 0 PID: 5235 Comm: md5sum Not tainted 5.7.0-rc3-fscache+ #250
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
memcpy+0x39/0x58
_copy_to_iter+0x323/0x5f4
__skb_datagram_iter+0x89/0x2a6
skb_copy_datagram_iter+0x129/0x135
rxrpc_recvmsg_data.isra.0+0x615/0xd42
rxrpc_kernel_recv_data+0x1e9/0x3ae
afs_extract_data+0x139/0x33a
yfs_deliver_fs_fetch_data64+0x47a/0x91b
afs_deliver_to_call+0x304/0x709
afs_wait_for_call_to_complete+0x1cc/0x4ad
yfs_fs_fetch_data+0x279/0x288
afs_fetch_data+0x1e1/0x38d
afs_readpages+0x593/0x72e
read_pages+0xf5/0x21e
__do_page_cache_readahead+0x128/0x23f
ondemand_readahead+0x36e/0x37f
generic_file_buffered_read+0x234/0x680
new_sync_read+0x109/0x17e
vfs_read+0xe6/0x138
ksys_read+0xd8/0x14d
do_syscall_64+0x6e/0x8a
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Fixes: 196ee9cd2d04 ("afs: Make afs_fs_fetch_data() take a list of pages")
Fixes: 30062bd13e36 ("afs: Implement YFS support in the fs client")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|