summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-11-24powerpc/85xx: Update P1020 SEC3.3 node to match actual SoC HWKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24powerpc/85xx: Update SPI binding to match binding spec for P1020RDBKumar Gala
The SPI node is out of date with regards to the binding for fsl-espi and driver support. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24powerpc/85xx: Rework PCI nodes on P1020RDBKumar Gala
* Move SoC specific details like irq mapping to SoC dtsi * Update interrupt property to cover both error interrupt and PCIe runtime interrupts Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24powerpc/85xx: Simplify P1020RDB CAMP dts using includesKumar Gala
If we include the p1020rdb.dts instead of p1020si.dts we greatly reduce duplication and maintenance. We can just list which devices are disabled for the given core and mpic protected sources. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24powerpc/8xxx: Update device tree bus probe for new RapidIO node bindingKai Jiang
Update of_platform_bus_probe() RapidIO node to be compitable with new RapidIO dts compatible property. Signed-off-by: Kai Jiang <Kai.Jiang@freescale.com> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24fsl-rio: Add two ports and rapidio message units supportLiu Gang
Usually, freescale rapidio endpoint can support one or two 1x or 4X LP-Serial link interfaces, and rapidio message transactions can be implemented by two message units. This adds the support of two rapidio ports and initializes message unit 0 and message unit 1. And these ports and message units can work simultaneously. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24fsl-rio: Split rio driver into two parts, RapidIO endpoint and message unitLiu Gang
The Freescale PowerPC RapidIO controller consists of a RapidIO endpoint and a RapidIO message unit(RMU). Or use RapidIO message manager(RMan) to replace the RMU in DPAA architecture. Therefore, we should split the code into two function modules according to the hardware architecture. Add new struct for RMU module, and new initialization function to set up RMU module. This policy is very conducive to adding new module like RMan, or adding multi-ports or message units support. Signed-off-by: Lian Minghuan <Minghuan.Lian@freescale.com> Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24powerpc/fsl: Document rapidio node binding-informationLiu Gang
This document is created for powerpc rapidio and rmu nodes in dts file. These nodes can support two rapidio ports and message units. In addition, It explicates the properties and gives examples about rapidio and rmu nodes. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24arch/powerpc/sysdev/ehv_pic.c: add missing kfreeJulia Lawall
At this point, ehv_pic has been allocated but not stored anywhere, so it should be freed before leaving the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24powerpc/fsl-lbc: Fix for fsl_upmAlexandre Rusev
If Freescale LBC driver fails to initialise itself from device tree, then internal structure is freed only but not NULL-fied. As result functions fsl_lbc_find() after checking the structure is not NULL are trying to access device registers. Signed-off-by: Alexandre Rusev <arusev@dev.rtsoft.ru> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24drivers/edac/mpc85xx_edac.c: fix memory controller compatible for edacShaohui Xie
compatible in dts has been changed, so the driver needs to be updated accordingly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24powerpc/qe: Fixup QE_General4 errataJoakim Tjernlund
QE_General4 should only round up the divisor iff divisor is > 3. Rounding up lower divisors makes the error too big, causing USB on MPC832x to fail. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-23powerpc/85xx: Fix compile error on p3060_qds.cKumar Gala
arch/powerpc/platforms/85xx/p3060_qds.c: In function '__machine_initcall_p3060_qds_declare_of_platform_devices': arch/powerpc/platforms/85xx/p3060_qds.c:73:1: error: implicit declaration of function 'declare_of_platform_devices' declare_of_platform_devices should have been corenet_ds_publish_devices. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-23powerpc/p3060qds: Fix select of 'MPC8xxx_GPIO'Paul Bolle
The driver for the Freescale P3060 QDS got added by commit 96cc017c5b ("[...] Add support for P3060QDS board"). Its Kconfig entry selects MPC8xxx_GPIO. But at the time that driver got added MPC8xxx_GPIO was already renamed to GPIO_MPC8XXX, by commit c68308dd50c ("gpio: move mpc8xxx/512x gpio driver to drivers/gpio"). So make this driver select GPIO_MPC8XXX. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-23powerpc/p1023: set IRQ[4:6,11] to active-high level sensitive for PCIeRoy Zang
P1023 external IRQ[4:6, 11] are not pin out, but the interrupts are utilized by the PCIe controllers. As they are not exposed as pins we need to set them as active-high (internal to the SoC these interrupts are pulled down). IRQs[0:3,7:10] are pulled up on the board so we have them set as active-low. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-23Linux 3.2-rc3Linus Torvalds
2011-11-23Merge git://github.com/rustyrussell/linuxLinus Torvalds
* git://github.com/rustyrussell/linux: virtio-pci: make reset operation safer virtio-mmio: Correct the name of the guest features selector virtio: add HAS_IOMEM dependency to MMIO platform bus driver
2011-11-24virtio-pci: make reset operation saferMichael S. Tsirkin
virtio pci device reset actually just does an I/O write, which in PCI is really posted, that is it can complete on CPU before the device has received it. Further, interrupts might have been pending on another CPU, so device callback might get invoked after reset. This conflicts with how drivers use reset, which is typically: reset unregister a callback running after reset completed can race with unregister, potentially leading to use after free bugs. Fix by flushing out the write, and flushing pending interrupts. This assumes that device is never reset from its vq/config callbacks, or in parallel with being added/removed, document this assumption. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-24virtio-mmio: Correct the name of the guest features selectorSasha Levin
Guest features selector spelling mistake. Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-24virtio: add HAS_IOMEM dependency to MMIO platform bus driverHeiko Carstens
Fix this compile error on s390: CC [M] drivers/virtio/virtio_mmio.o drivers/virtio/virtio_mmio.c: In function 'vm_get_features': drivers/virtio/virtio_mmio.c:107:2: error: implicit declaration of function 'writel' Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-23Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-devLinus Torvalds
* 'upstream-linus' of git://github.com/jgarzik/libata-dev: libata: fix build without BMDMA [libata] ahci_platform: fix DT probing
2011-11-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDs PCI: pciehp: wait 100 ms after Link Training check PCI: pciehp: wait 1000 ms before Link Training check PCI: pciehp: Retrieve link speed after link is trained PCI: Let PCI_PRI depend on PCI PCI: Fix compile errors with PCI_ATS and !PCI_IOV PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplug
2011-11-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: Extend array bounds for all filename chars eCryptfs: Flush file in vma close eCryptfs: Prevent file create race condition
2011-11-23eCryptfs: Extend array bounds for all filename charsTyler Hicks
From mhalcrow's original commit message: Characters with ASCII values greater than the size of filename_rev_map[] are valid filename characters. ecryptfs_decode_from_filename() will access kernel memory beyond that array, and ecryptfs_parse_tag_70_packet() will then decrypt those characters. The attacker, using the FNEK of the crafted file, can then re-encrypt the characters to reveal the kernel memory past the end of the filename_rev_map[] array. I expect low security impact since this array is statically allocated in the text area, and the amount of memory past the array that is accessible is limited by the largest possible ASCII filename character. This patch solves the issue reported by mhalcrow but with an implementation suggested by Linus to simply extend the length of filename_rev_map[] to 256. Characters greater than 0x7A are mapped to 0x00, which is how invalid characters less than 0x7A were previously being handled. Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Reported-by: Michael Halcrow <mhalcrow@google.com> Cc: stable@kernel.org
2011-11-23eCryptfs: Flush file in vma closeTyler Hicks
Dirty pages weren't being written back when an mmap'ed eCryptfs file was closed before the mapping was unmapped. Since f_ops->flush() is not called by the munmap() path, the lower file was simply being released. This patch flushes the eCryptfs file in the vm_ops->close() path. https://launchpad.net/bugs/870326 Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Cc: stable@kernel.org [2.6.39+]
2011-11-23eCryptfs: Prevent file create race conditionTyler Hicks
The file creation path prematurely called d_instantiate() and unlock_new_inode() before the eCryptfs inode info was fully allocated and initialized and before the eCryptfs metadata was written to the lower file. This could result in race conditions in subsequent file and inode operations leading to unexpected error conditions or a null pointer dereference while attempting to use the unallocated memory. https://launchpad.net/bugs/813146 Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Cc: stable@kernel.org
2011-11-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Check parent options for iterated tests
2011-11-23Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Make i2cdev_notifier_call static i2c: Delete ANY_I2C_BUS i2c: Fix device name for 10-bit slave address i2c-algo-bit: Generate correct i2c address sequence for 10-bit target
2011-11-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: TPS65910: Fix VDD1/2 voltage selector count
2011-11-23Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits) drm: integer overflow in drm_mode_dirtyfb_ioctl() drivers/gpu/vga/vgaarb.c: add missing kfree drm/radeon/kms/atom: unify i2c gpio table handling drm/radeon/kms: fix up gpio i2c mask bits for r4xx for real ttm: Don't return the bo reserved on error path drm/radeon/kms: add a CS ioctl flag not to rewrite tiling flags in the CS drm/i915: Fix inconsistent backlight level during disabled drm, i915: Fix memory leak in i915_gem_busy_ioctl(). drm/i915: Use DPCD value for max DP lanes. drm/i915: Initiate DP link training only on the lanes we'll be using drm/i915: Remove trailing white space drm/i915: Try harder during dp pattern 1 link training drm/i915: Make DP prepare/commit consistent with DP dpms drm/i915: Let panel power sequencing hardware do its job drm/i915: Treat PCH eDP like DP in most places drm/i915: Remove link_status field from intel_dp structure drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control drm/i915: Module parameters using '-1' as default must be signed type drm/i915: Turn on another required clock gating bit on gen6. drm/i915: Turn on a required 3D clock gating bit on Sandybridge. ...
2011-11-23regulator: TPS65910: Fix VDD1/2 voltage selector countAfzal Mohammed
Count of selector voltage is required for regulator_set_voltage to work via set_voltage_sel. VDD1/2 currently have it as zero, so regulator_set_voltage won't work for VDD1/2. Update count (n_voltages) for VDD1/2. Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain With above expr, number of voltages that can be selected is step value count * gain count constant for gain count will be called VDD1_2_NUM_VOLT_COARSE existing constant for step value count is VDD1_2_NUM_VOLTS, use VDD1_2_NUM_VOLT_FINE instead to make clear that step value is not the only component in deciding selectable voltage count Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23i2c: Make i2cdev_notifier_call staticShubhrajyoti D
The function i2cdev_notifier_call is used only in i2c-dev file making it static. Also removes the following sparse warning drivers/i2c/i2c-dev.c:582:5: warning: symbol 'i2cdev_notifier_call' was not declared. Should it be static? Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-11-23i2c: Delete ANY_I2C_BUSJean Delvare
Last piece of code using ANY_I2C_BUS was deleted almost 2 years ago, so ANY_I2C_BUS can go away as well. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-11-23i2c: Fix device name for 10-bit slave addressJean Delvare
10-bit addresses overlap with traditional 7-bit addresses, leading in device name collisions. Add an arbitrary offset to 10-bit addresses to prevent this collision. The offset was chosen so that the address is still easily recognizable. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-11-23i2c-algo-bit: Generate correct i2c address sequence for 10-bit targetJeffrey (Sheng-Hui) Chu
The wrong bits were put on the wire, fix that. This fixes kernel bug #42562. Signed-off-by: Sheng-Hui J. Chu <jeffchu@broadcom.com> Cc: stable@kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-11-23drm: integer overflow in drm_mode_dirtyfb_ioctl()Xi Wang
There is a potential integer overflow in drm_mode_dirtyfb_ioctl() if userspace passes in a large num_clips. The call to kmalloc would allocate a small buffer, and the call to fb->funcs->dirty may result in a memory corruption. Reported-by: Haogang Chen <haogangchen@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-22Revert "of/irq: of_irq_find_parent: check for parent equal to child"Linus Torvalds
This reverts commit dc9372808412edbc653a675a526c2ee6c0c14a91. As requested by Ben Herrenschmidt: "This breaks some powerpc platforms at least. The practice of having a node provide an explicit "interrupt-parent" property pointing to itself is an old trick that we've used in the past to allow a device-node to have interrupts routed to different controllers. In that case, the node also contains an interrupt-map, so the node is its own parent, the interrupt resolution hits the map, which then can route each individual interrupt to a different parent." Grant says: "Ah, nuts, yes that is broken then. Yes, please revert the commit and Rob & I will come up with a better solution. Rob, I think it can be done by explicitly checking for np == desc->interrupt_parent in of_irq_init() instead of relying on of_irq_find_parent() returning NULL." Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org> Cc: Tanmay Inamdar <tinamdar@apm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: mount_subtree() pointless use-after-free iio: fix a leak due to improper use of anon_inode_getfd() microblaze: bury asm/namei.h
2011-11-22drivers/gpu/vga/vgaarb.c: add missing kfreeJulia Lawall
kbuf is a buffer that is local to this function, so all of the error paths leaving the function should release it. Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-22drm/radeon/kms/atom: unify i2c gpio table handlingAlex Deucher
Split the quirks and i2c_rec assignment into separate functions used by both radeon_lookup_i2c_gpio() and radeon_atombios_i2c_init(). This avoids duplicating code and cases where quirks were only added to one of the functions. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-22drm/radeon/kms: fix up gpio i2c mask bits for r4xx for realAlex Deucher
Fixes i2c test failures when i2c_algo_bit.bit_test=1. The hw doesn't actually require a mask, so just set it to the default mask bits for r1xx-r4xx radeon ddc. I missed this part the first time through. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-22ttm: Don't return the bo reserved on error pathThomas Hellstrom
An unlikely race could case a bo to be returned reserved on an error path. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-22Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux ↵Dave Airlie
into drm-fixes * 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: (25 commits) drm/i915: Fix inconsistent backlight level during disabled drm, i915: Fix memory leak in i915_gem_busy_ioctl(). drm/i915: Use DPCD value for max DP lanes. drm/i915: Initiate DP link training only on the lanes we'll be using drm/i915: Remove trailing white space drm/i915: Try harder during dp pattern 1 link training drm/i915: Make DP prepare/commit consistent with DP dpms drm/i915: Let panel power sequencing hardware do its job drm/i915: Treat PCH eDP like DP in most places drm/i915: Remove link_status field from intel_dp structure drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control drm/i915: Module parameters using '-1' as default must be signed type drm/i915: Turn on another required clock gating bit on gen6. drm/i915: Turn on a required 3D clock gating bit on Sandybridge. drm/i915: enable cacheable objects on Ivybridge drm/i915: add constants to size fence arrays and fields drm/i915: Ivybridge still has fences! drm/i915: forcewake warning fixes in debugfs drm/i915: Fix object refcount leak on mmappable size limit error path. drm/i915: Use mode_config.mutex in ironlake_panel_vdd_work ...
2011-11-22mount_subtree() pointless use-after-freeAl Viro
d'oh... we'd carefully pinned mnt->mnt_sb down, dropped mnt and attempt to grab s_umount on mnt->mnt_sb. The trouble is, *mnt might've been overwritten by now... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-11-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ams_delta_serio - include linux/module.h Input: elantech - adjust hw_version detection logic Input: i8042 - add HP Pavilion dv4s to 'notimeout' and 'nomux' blacklists
2011-11-22Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
* git://www.linux-watchdog.org/linux-watchdog: watchdog: fix initialisation printout in s3c2410_wdt watchdog: Don't overwrite error value in wm831x_wdt_set_timeout() watchdog: adx_wdt.c: remove driver
2011-11-22Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Revert pnfs ugliness from the generic NFS read code path SUNRPC: destroy freshly allocated transport in case of sockaddr init error NFS: Fix a regression in the referral code nfs: move nfs_file_operations declaration to bottom of file.c (try #2) nfs: when attempting to open a directory, fall back on normal lookup (try #5)
2011-11-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: remove free-space-cache.c WARN during log replay Btrfs: sectorsize align offsets in fiemap Btrfs: clear pages dirty for io and set them extent mapped Btrfs: wait on caching if we're loading the free space cache Btrfs: prefix resize related printks with btrfs: btrfs: fix stat blocks accounting Btrfs: avoid unnecessary bitmap search for cluster setup Btrfs: fix to search one more bitmap for cluster setup btrfs: mirror_num should be int, not u64 btrfs: Fix up 32/64-bit compatibility for new ioctls Btrfs: fix barrier flushes Btrfs: fix tree corruption after multi-thread snapshots and inode_cache flush
2011-11-22Merge branch 'writeback-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux * 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: remove vm_dirties and task->dirties writeback: hard throttle 1000+ dd on a slow USB stick mm: Make task in balance_dirty_pages() killable
2011-11-21Merge branch 'staging-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: fix more ET131X build errors staging: et131x depends on NET staging: slicoss depends on NET linux-next: et131x: Fix build error when CONFIG_PM_SLEEP not enabled
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-18 22:19:29 +0000