summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-12-16cxgb4: allocate more space for MSI-X interrupt namesDimitris Michailidis
Currently MSI-X names for netdevs with long names are truncated in /proc/interrupts due to insufficient space. Use IFNAMSIZ to size the needed space. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: print port information after registering each netdevDimitris Michailidis
Print information about each port when its netdev is registered instead of looping separately over the ports at the end. The bulk of this patch is due to indentation change. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: distinguish between 1-lane KR/KX and 4-lane KR/KX/KX4 portsDimitris Michailidis
And fix the supported flags ethtool reports for the two cases. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: set the number of queues before device registrationDimitris Michailidis
The number of queues is known early, move the calls to netif_set_real_num_[rt]x_queues before register_netdev. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: do not read the clock frequency from VPDDimitris Michailidis
No need to read the clock frequency from VPD, we already get it a bit later from FW, after any potential adjustments. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: enable PCIe relaxed orderingDimitris Michailidis
Enable relaxed ordering for descriptor reads and packet I/O. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: update version to 1.62.00-2Vladislav Zolotarov
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: remove old FW filesVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: replace FW to 6.2.5Vladislav Zolotarov
Includes FCoE releated fixes in FW flows Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add FW 6.2.5 filesVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: Add DCB/PFC support - link layerVladislav Zolotarov
Add appropriate HW DCB/PFC configuration Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add DCB supportVladislav Zolotarov
Adding DCB initialization and handling on 57712 FW/HW Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add a select queue callbackVladislav Zolotarov
This callback required to allow FCoE traffic to be sent on separate priority queue from other L2 traffic, which is managed by PFC in HW. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add FCoE ringVladislav Zolotarov
Includes new driver structures and FW/HW configuration for FCoE ring Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: Take the distribution range definition out of skb_tx_hash()Vladislav Zolotarov
Move the calcualation of the Tx hash for a given hash range into a separate function and define the skb_tx_hash(), which calculates a Tx hash for a [0; dev->real_num_tx_queues - 1] hash values range, using this function (__skb_tx_hash()). Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bonding/vlan: Fix mangled NAs on slaves without VLAN tag insertionBen Hutchings
bond_na_send() attempts to insert a VLAN tag in between building and sending packets of the respective formats. If the slave does not implement hardware VLAN tag insertion then vlan_put_tag() will mangle the network-layer header because the Ethernet header is not present at this point (unlike in bond_arp_send()). Fix this by adding the tag out-of-line and relying on dev_hard_start_xmit() to insert it inline if necessary. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bonding: Change active slave quietly when bond is downBen Hutchings
bond_change_active_slave() may be called when a slave is added, even if the bond has not been brought up yet. It may then attempt to send packets, and further it may use mcast_work which is uninitialised before the bond is brought up. Add the necessary checks for netif_running(bond->dev). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bonding/vlan: Remove redundant VLAN tag insertion logicBen Hutchings
A bond may have a mixture of slave devices with and without hardware VLAN tag insertion capability. Therefore it always claims this capability and performs software VLAN tag insertion if the slave does not. Since commit 7b9c60903714bf0a19d746b228864bad3497284e, this has also been done by dev_hard_start_xmit(). The result is that VLAN- tagged skbs are now double-tagged when transmitted through slave devices without hardware VLAN tag insertion! Remove the now-redundant logic from bond_dev_queue_xmit(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16axnet_cs: move id (0x1bf, 0x2328) to axnet_csKen Kawasaki
axnet_cs: Accton EN2328 or compatible (id: 0x01bf, 0x2328) uses Asix chip. So it works better with axnet_cs instead of pcnet_cs. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16ipv6: delete expired route in ip6_pmtu_deliverAndrey Vagin
The first big packets sent to a "low-MTU" client correctly triggers the creation of a temporary route containing the reduced MTU. But after the temporary route has expired, new ICMP6 "packet too big" will be sent, rt6_pmtu_discovery will find the previous EXPIRED route check that its mtu isn't bigger then in icmp packet and do nothing before the temporary route will not deleted by gc. I make the simple experiment: while :; do time ( dd if=/dev/zero bs=10K count=1 | ssh hostname dd of=/dev/null ) || break; done The "time" reports real 0m0.197s if a temporary route isn't expired, but it reports real 0m52.837s (!!!!) immediately after a temporare route has expired. Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bonding: Fix slave selection bug.Hillf Danton
The returned slave is incorrect, if the net device under check is not charged yet by the master. Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16rtlwifi: Switch locking from semaphores to mutexesLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16rtl8192ce: Update MAINTAINERSLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath5k: Fix surveyBruno Randolf
The old survey implementation was broken and returned nonsense data. Clear cycle counters and survey data on reset. Since the cycle counters easily overflow it's better to keep a local version of collected survey data (in ms resolution, instead of clockrate) and update this every time survey is retrieved. If survey is retrieved often enough to avoid cycle counter overflows this works fine, otherwise we could update survey more often, like ath9k does. Still only the survey for the current channel is kept. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16rtl8192ce: Fix build on powerpcLarry Finger
After merge of the rtl8192ce driver, a powerpc build fails with: drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c: In function 'rtl92c_init_sw_vars': drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c:76: error: implicit declaration of function 'vmalloc' drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c:76: warning: cast to pointer from integer of different size drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c: In function 'rtl92c_deinit_sw_vars': drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c:91: error: implicit declaration of function 'vfree' The problem is fixed by explicitly including the appropriate header. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath: fix NULL pointer dereference on reg_notifier()Luis R. Rodriguez
The reg_notifier() was recently updated as being capable of having the request passed as NULL, fix ath to follow this API change. Without this we end up oopsing: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [<ffffffffa02fb8cb>] ath_reg_notifier_apply+0x5b/0xa0 [ath] PGD b4c4c067 PUD b4c4d067 PMD 0 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/pci0000:00/0000:00:1b.0/uevent CPU 1 Modules linked in: <etc> Pid: 436, comm: modprobe Not tainted 2.6.37-rc5-wl+ #36 6460DWU/6460DWU RIP: 0010:[<ffffffffa02fb8cb>] [<ffffffffa02fb8cb>] ath_reg_notifier_apply+0x5b/0xa0 [ath] RSP: 0018:ffff8800b6f6baa8 EFLAGS: 00010246 RAX: ffff8800b527b254 RBX: ffff8800b532c180 RCX: 0000000000000018 RDX: ffff8800b530c108 RSI: 0000000000000000 RDI: ffff8800b532c180 RBP: ffff8800b6f6baa8 R08: ffff8800b532f268 R09: 0000000000000235 R10: 00000000000016ad R11: 0000000000000018 R12: 0000000000000000 R13: 0000000000000016 R14: ffff8800b532f268 R15: 0000000000000011 FS: 00007f0c53104700(0000) GS:ffff8800bed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000004 CR3: 00000000b6531000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 436, threadinfo ffff8800b6f6a000, task ffff8800b404dc40) Stack: ffff8800b6f6bac8 ffffffffa03ea651 ffff8800b532c180 ffff8800b527b254 ffff8800b6f6bb38 ffffffffa01835ca ffffffffa019ed00 00000000a019ed80 0000000000000002 ffff880000000002 ffffffffa0366140 0000000010aee572 Call Trace: [<ffffffffa03ea651>] ath9k_reg_notifier+0x41/0x50 [ath9k] [<ffffffffa01835ca>] wiphy_update_regulatory+0x4ba/0x5a0 [cfg80211] [<ffffffffa0366140>] ? ieee80211_register_hw+0xa0/0x5b0 [mac80211] [<ffffffffa0366140>] ? ieee80211_register_hw+0xa0/0x5b0 [mac80211] [<ffffffffa017f994>] wiphy_register+0x1d4/0x360 [cfg80211] [<ffffffff8114b918>] ? __kmalloc+0x108/0x1c0 [<ffffffffa0366223>] ieee80211_register_hw+0x183/0x5b0 [mac80211] [<ffffffffa03eb49b>] ath9k_init_device+0x66b/0x850 [ath9k] [<ffffffffa03f9dd6>] ath_pci_probe+0x2f6/0x3c0 [ath9k] [<ffffffff81037529>] ? default_spin_lock_flags+0x9/0x10 [<ffffffff812e19cf>] local_pci_probe+0x5f/0xd0 [<ffffffff812e2bf1>] pci_device_probe+0x101/0x120 [<ffffffff81390aca>] ? driver_sysfs_add+0x7a/0xb0 [<ffffffff81390c26>] driver_probe_device+0x96/0x1c0 [<ffffffff81390deb>] __driver_attach+0x9b/0xa0 [<ffffffff81390d50>] ? __driver_attach+0x0/0xa0 [<ffffffff81390008>] bus_for_each_dev+0x68/0x90 [<ffffffff81390a4e>] driver_attach+0x1e/0x20 [<ffffffff81390309>] bus_add_driver+0xe9/0x290 [<ffffffffa0407000>] ? ath9k_init+0x0/0x4d [ath9k] [<ffffffff81391130>] driver_register+0x80/0x150 [<ffffffffa0407000>] ? ath9k_init+0x0/0x4d [ath9k] [<ffffffffa0407000>] ? ath9k_init+0x0/0x4d [ath9k] [<ffffffff812e2e76>] __pci_register_driver+0x56/0xd0 [<ffffffffa03f9ec3>] ath_pci_init+0x23/0x30 [ath9k] [<ffffffffa040702b>] ath9k_init+0x2b/0x4d [ath9k] [<ffffffff81002053>] do_one_initcall+0x43/0x190 [<ffffffff8109fb5b>] sys_init_module+0xbb/0x200 [<ffffffff8100c042>] system_call_fastpath+0x16/0x1b Code: <who even reads this anyway? haha, ok you do> RIP [<ffffffffa02fb8cb>] ath_reg_notifier_apply+0x5b/0xa0 [ath] RSP <ffff8800b6f6baa8> CR2: 0000000000000004 ---[ end trace 6d03d3c7eda9f06b ]--- Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16cfg80211: fix null pointer dereference with a custom regulatory requestLuis R. Rodriguez
Once we moved the core regulatory request to the queue and let the scheduler process it last_request will have been left NULL until the schedular decides to process the first request. When this happens and we are loading a driver with a custom regulatory request like all Atheros drivers we end up with a NULL pointer dereference. We fix this by checking if the request was a custom one. BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [<ffffffffa016de87>] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211] PGD 71f91067 PUD 712b2067 PMD 0 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/firmware/2-1/loading CPU 0 Modules linked in: ath9k_htc(+) ath9k_common ath9k_hw ath <etc> Pid: 3094, comm: insmod Tainted: G W 2.6.37-rc5-wl #16 INVALID/28427ZQ RIP: 0010:[<ffffffffa016de87>] [<ffffffffa016de87>] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211] RSP: 0018:ffff88007045db78 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffffa047d9a0 RCX: ffff88007045dbd0 RDX: 0000000000004e20 RSI: 000000000024cde0 RDI: ffff8800700483e0 RBP: ffff88007045db98 R08: ffffffffa02f5b40 R09: 0000000000000001 R10: 000000000000000e R11: 0000000000000001 R12: 0000000000000000 R13: ffff88007004e3b0 R14: 0000000000000000 R15: ffff880070048340 FS: 00007f635a707700(0000) GS:ffff880077400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000004 CR3: 00000000708a9000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process insmod (pid: 3094, threadinfo ffff88007045c000, task ffff8800713e3ec0) Stack: ffffffffa047d9a0 0000000000000000 ffff88007004e3b0 0000000000000000 ffff88007045dc08 ffffffffa016e147 000000007045dc08 0000000000000002 ffff8800700483e0 ffffffffa02f5b40 ffff88007045dbd8 0000000000000000 Call Trace: [<ffffffffa016e147>] wiphy_apply_custom_regulatory+0x137/0x1d0 [cfg80211] [<ffffffffa047a690>] ? ath9k_reg_notifier+0x0/0x50 [ath9k_htc] [<ffffffffa02f47f7>] ath_regd_init+0x347/0x430 [ath] [<ffffffffa047b1f5>] ath9k_htc_probe_device+0x6c5/0x960 [ath9k_htc] [<ffffffffa0472a2c>] ath9k_htc_hw_init+0xc/0x30 [ath9k_htc] [<ffffffffa04747e6>] ath9k_hif_usb_probe+0x216/0x3b0 [ath9k_htc] [<ffffffffa03bb6bc>] usb_probe_interface+0x10c/0x210 [usbcore] [<ffffffff812aec26>] driver_probe_device+0x96/0x1c0 [<ffffffff812aedf3>] __driver_attach+0xa3/0xb0 [<ffffffff812aed50>] ? __driver_attach+0x0/0xb0 [<ffffffff812adaae>] bus_for_each_dev+0x5e/0x90 [<ffffffff812ae8c9>] driver_attach+0x19/0x20 [<ffffffff812ae438>] bus_add_driver+0x168/0x320 [<ffffffff812af071>] driver_register+0x71/0x140 [<ffffffff811fc4a8>] ? __raw_spin_lock_init+0x38/0x70 [<ffffffffa03ba39c>] usb_register_driver+0xdc/0x190 [usbcore] [<ffffffffa03a2000>] ? ath9k_htc_init+0x0/0x4f [ath9k_htc] [<ffffffffa047499e>] ath9k_hif_usb_init+0x1e/0x20 [ath9k_htc] [<ffffffffa03a202b>] ath9k_htc_init+0x2b/0x4f [ath9k_htc] [<ffffffff8100212f>] do_one_initcall+0x3f/0x180 [<ffffffff8109ef5b>] sys_init_module+0xbb/0x200 [<ffffffff8100bf52>] system_call_fastpath+0x16/0x1b Code: <etc, who cares> RIP [<ffffffffa016de87>] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211] RSP <ffff88007045db78> CR2: 0000000000000004 ---[ end trace 79e4193601c8b713 ]--- Reported-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath9k_hw: Configure appropriate Tx power when PAPRD failsVasanthakumar Thiagarajan
Target Tx power available in eeprom is for PAPRD. If PAPRD fails, paprd scale factor needs to be detected from this target tx power. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath9k_hw: Disable PAPRD for rates with low Tx powerVasanthakumar Thiagarajan
When the drop in Tx power for a particular mcs rate exceeds the paprd scale factor, paprd may not work properly. Disable paprd for any such rates. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath9k_hw: Add a helper to get paprd scale factorVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath9k_hw: Tx IQ cal changes for AR9003Vasanthakumar Thiagarajan
Add multiple Tx IQ cal support to improve EVM accross different power levels. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath9k_hw: Move get_streams() to hw.hVasanthakumar Thiagarajan
This helper can be used in multiple places. Also make it inline returning u8. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath9k_hw: Remove unnecessary Rx IQ cal register configuration in ↵Vasanthakumar Thiagarajan
ar9003_hw_tx_iq_cal() Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath9k_hw: Remove delay during regwrite of analog shift registersVasanthakumar Thiagarajan
This is not needed for AR9003. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16nl80211: Add notification for dropped Deauth/DisassocJouni Malinen
Add a new notification to indicate that a received, unprotected Deauthentication or Disassociation frame was dropped due to management frame protection being in use. This notification is needed to allow user space (e.g., wpa_supplicant) to implement SA Query procedure to recover from association state mismatch between an AP and STA. This is needed to avoid getting stuck in non-working state when MFP (IEEE 802.11w) is used and a protected Deauthentication or Disassociation frame is dropped for any reason. After that, the station would silently discard any unprotected Deauthentication or Disassociation frame that could be indicating that the AP does not have association for the STA (when the Reason Code would be 6 or 7). IEEE Std 802.11w-2009, 11.13 describes this recovery mechanism. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16Merge branch 'wl12xx-next' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2010-12-16iwlwifi: Fix error: struct iwl_lq_sta has no member named dbg_fixed_rateSedat Dilek
While compiling linux-next (next-20101216) I fell over this breakage: ... drivers/net/wireless/iwlwifi/iwl-agn-rs.c: In function ‘iwl_rs_rate_init’: drivers/net/wireless/iwlwifi/iwl-agn-rs.c:2876:8: error: ‘struct iwl_lq_sta’ has no member named ‘dbg_fixed_rate’ dbg_fixed_rate is only used when CONFIG_MAC80211_DEBUGFS is set: [ drivers/net/wireless/iwlwifi/iwl-agn-rs.h ] ... #ifdef CONFIG_MAC80211_DEBUGFS struct dentry *rs_sta_dbgfs_scale_table_file; struct dentry *rs_sta_dbgfs_stats_table_file; struct dentry *rs_sta_dbgfs_rate_scale_data_file; struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file; u32 dbg_fixed_rate; #endif The issue was introduced by commit a1da077bc36368eb7d6312e7e49260f0a3d92c77: "iwlwifi: clear dbg_fixed_rate during init" Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16rtlwifi: convert to __packed notationJohn W. Linville
Use "__packed" instead of "__attribute__ ((packed))"... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-15wireless:mac80211: kill unuse macro MESH_CFG_CMP_LEN in mesh.hShan Wei
Commit 00d3f14c has removed the references of this macro, but left it only. So remove this definition. commit 00d3f14cf9f12c21428121026a5e1d5f65926447 Author: Johannes Berg <johannes@sipsolutions.net> Date: Tue Feb 10 21:26:00 2009 +0100 mac80211: use cfg80211s BSS infrastructure Remove all the code from mac80211 to keep track of BSSes and use the cfg80211-provided code completely. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-15ath9k: Add comments for making pm-qos as modparamMohammed Shafi Shajakhan
PM-QOS value can be user specified via module parameter. This patch adds few comments regarding this in the driver code. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-15ath9k_htc: Remove PCI specific configurationSujith Manoharan
This is not required for USB devices. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-15mac80211: Add timeout to BA session start APISujith Manoharan
Allow drivers or rate control algorithms to specify BlockAck session timeout when initiating an ADDBA transaction. This is useful in cases where maintaining persistent BA sessions does not incur any overhead. The current timeout value of 5000 TUs is retained for all non ath9k/ath9k_htc drivers. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-15nl80211: advertise maximum remain-on-channel durationJohannes Berg
With the upcoming hardware offload implementation, some devices will have a different maximum duration for the remain-on-channel command. Advertise the maximum duration in mac80211, and make mac80211 set it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-15iwlagn: fix witespace damageWey-Yi Guy
patch "iwlagn: check ready in iwlagn_bss_info_changed()" introduce whitespace, fix it please merge with the previous patch Reported by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-15ath9k: Make PM-QOS value as user configurableMohammed Shafi Shajakhan
This patch allows the pm-qos value to be user configurable by making it as a module parameter.This will help our customers to configure the pm-qos value according to the effect in throughput due to the DMA latency problem which was observed in Intel Pinetrail platforms. The tested value of '55' will be filled as the default pm-qos-value incase the user does not specifies pm-qos value as a module parameter. example usage: sudo modprobe ath9k pmqos=65 Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-15Merge branch 'wireless-next-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-1000.c drivers/net/wireless/iwlwifi/iwl-6000.c drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c drivers/net/wireless/iwlwifi/iwl-core.h
2010-12-15Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-1000.c drivers/net/wireless/iwlwifi/iwl-6000.c drivers/net/wireless/iwlwifi/iwl-core.h
2010-12-15rtl8192ce: Add new driverLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-15Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-12-15wl12xx_sdio_test: rename files to match current styleLuciano Coelho
Change some file names and Kconfig settings so that this new module matches the new way of using wl12xx instead of wl1271. Also fix SDIO power enabling and disabling to match the latest way of doing it. Cc: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 13:13:56 +0000