| Age | Commit message (Collapse) | Author |
|---|
|
BCM7278 has only 128 entries while BCM7445 has the full 256 entries set,
fix that.
Fixes: 7318166cacad ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzkaller had no problem to trigger a deadlock, attaching a KCM socket
to another one (or itself). (original syzkaller report was a very
confusing lockdep splat during a sendmsg())
It seems KCM claims to only support TCP, but no enforcement is done,
so we might need to add additional checks.
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Dan Williams:
"A single patch removing some structure definitions from a uapi header
file. These payloads are never processed directly by the kernel they
are simply passed through an ioctl as opaque blobs to the ACPI _DSM
(Device Specific Method) interface.
Userspace should not be depending on the kernel to define these
payloads. We will instead provide these definitions via the existing
libndctl (https://github.com/pmem/ndctl) project that has NVDIMM
command helpers and other definitions"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm: clean up command definitions
|
|
Nikolay Aleksandrov says:
====================
net/sched: init failure fixes
I went over all qdiscs' init, destroy and reset callbacks and found the
issues fixed in each patch. Mostly they are null pointer dereferences due
to uninitialized timer (qdisc watchdog) or double frees due to ->destroy
cleaning up a second time. There's more information in each patch.
I've tested these by either sending wrong attributes from user-spaces, no
attributes or by simulating memory alloc failure where applicable. Also
tried all of the qdiscs as a default qdisc.
Most of these bugs were present before commit 87b60cfacf9f, I've tried to
include proper fixes tags in each patch.
I haven't included individual patch acks in the set, I'd appreciate it if
you take another look and resend them.
====================
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sch_tbf calls qdisc_watchdog_cancel() in both its ->reset and ->destroy
callbacks but it may fail before the timer is initialized due to missing
options (either not supplied by user-space or set as a default qdisc),
also q->qdisc is used by ->reset and ->destroy so we need it initialized.
Reproduce:
$ sysctl net.core.default_qdisc=tbf
$ ip l set ethX up
Crash log:
[ 959.160172] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
[ 959.160323] IP: qdisc_reset+0xa/0x5c
[ 959.160400] PGD 59cdb067
[ 959.160401] P4D 59cdb067
[ 959.160466] PUD 59ccb067
[ 959.160532] PMD 0
[ 959.160597]
[ 959.160706] Oops: 0000 [#1] SMP
[ 959.160778] Modules linked in: sch_tbf sch_sfb sch_prio sch_netem
[ 959.160891] CPU: 2 PID: 1562 Comm: ip Not tainted 4.13.0-rc6+ #62
[ 959.160998] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 959.161157] task: ffff880059c9a700 task.stack: ffff8800376d0000
[ 959.161263] RIP: 0010:qdisc_reset+0xa/0x5c
[ 959.161347] RSP: 0018:ffff8800376d3610 EFLAGS: 00010286
[ 959.161531] RAX: ffffffffa001b1dd RBX: ffff8800373a2800 RCX: 0000000000000000
[ 959.161733] RDX: ffffffff8215f160 RSI: ffffffff8215f160 RDI: 0000000000000000
[ 959.161939] RBP: ffff8800376d3618 R08: 00000000014080c0 R09: 00000000ffffffff
[ 959.162141] R10: ffff8800376d3578 R11: 0000000000000020 R12: ffffffffa001d2c0
[ 959.162343] R13: ffff880037538000 R14: 00000000ffffffff R15: 0000000000000001
[ 959.162546] FS: 00007fcc5126b740(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000
[ 959.162844] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 959.163030] CR2: 0000000000000018 CR3: 000000005abc4000 CR4: 00000000000406e0
[ 959.163233] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 959.163436] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 959.163638] Call Trace:
[ 959.163788] tbf_reset+0x19/0x64 [sch_tbf]
[ 959.163957] qdisc_destroy+0x8b/0xe5
[ 959.164119] qdisc_create_dflt+0x86/0x94
[ 959.164284] ? dev_activate+0x129/0x129
[ 959.164449] attach_one_default_qdisc+0x36/0x63
[ 959.164623] netdev_for_each_tx_queue+0x3d/0x48
[ 959.164795] dev_activate+0x4b/0x129
[ 959.164957] __dev_open+0xe7/0x104
[ 959.165118] __dev_change_flags+0xc6/0x15c
[ 959.165287] dev_change_flags+0x25/0x59
[ 959.165451] do_setlink+0x30c/0xb3f
[ 959.165613] ? check_chain_key+0xb0/0xfd
[ 959.165782] rtnl_newlink+0x3a4/0x729
[ 959.165947] ? rtnl_newlink+0x117/0x729
[ 959.166121] ? ns_capable_common+0xd/0xb1
[ 959.166288] ? ns_capable+0x13/0x15
[ 959.166450] rtnetlink_rcv_msg+0x188/0x197
[ 959.166617] ? rcu_read_unlock+0x3e/0x5f
[ 959.166783] ? rtnl_newlink+0x729/0x729
[ 959.166948] netlink_rcv_skb+0x6c/0xce
[ 959.167113] rtnetlink_rcv+0x23/0x2a
[ 959.167273] netlink_unicast+0x103/0x181
[ 959.167439] netlink_sendmsg+0x326/0x337
[ 959.167607] sock_sendmsg_nosec+0x14/0x3f
[ 959.167772] sock_sendmsg+0x29/0x2e
[ 959.167932] ___sys_sendmsg+0x209/0x28b
[ 959.168098] ? do_raw_spin_unlock+0xcd/0xf8
[ 959.168267] ? _raw_spin_unlock+0x27/0x31
[ 959.168432] ? __handle_mm_fault+0x651/0xdb1
[ 959.168602] ? check_chain_key+0xb0/0xfd
[ 959.168773] __sys_sendmsg+0x45/0x63
[ 959.168934] ? __sys_sendmsg+0x45/0x63
[ 959.169100] SyS_sendmsg+0x19/0x1b
[ 959.169260] entry_SYSCALL_64_fastpath+0x23/0xc2
[ 959.169432] RIP: 0033:0x7fcc5097e690
[ 959.169592] RSP: 002b:00007ffd0d5c7b48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 959.169887] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007fcc5097e690
[ 959.170089] RDX: 0000000000000000 RSI: 00007ffd0d5c7b90 RDI: 0000000000000003
[ 959.170292] RBP: ffff8800376d3f98 R08: 0000000000000001 R09: 0000000000000003
[ 959.170494] R10: 00007ffd0d5c7910 R11: 0000000000000246 R12: 0000000000000006
[ 959.170697] R13: 000000000066f1a0 R14: 00007ffd0d5cfc40 R15: 0000000000000000
[ 959.170900] ? trace_hardirqs_off_caller+0xa7/0xcf
[ 959.171076] Code: 00 41 c7 84 24 14 01 00 00 00 00 00 00 41 c7 84 24
98 00 00 00 00 00 00 00 41 5c 41 5d 41 5e 5d c3 66 66 66 66 90 55 48 89
e5 53 <48> 8b 47 18 48 89 fb 48 8b 40 48 48 85 c0 74 02 ff d0 48 8b bb
[ 959.171637] RIP: qdisc_reset+0xa/0x5c RSP: ffff8800376d3610
[ 959.171821] CR2: 0000000000000018
Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Fixes: 0fbbeb1ba43b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently only a memory allocation failure can lead to this, so let's
initialize the timer first.
Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netem can fail in ->init due to missing options (either not supplied by
user-space or used as a default qdisc) causing a timer->base null
pointer deref in its ->destroy() and ->reset() callbacks.
Reproduce:
$ sysctl net.core.default_qdisc=netem
$ ip l set ethX up
Crash log:
[ 1814.846943] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 1814.847181] IP: hrtimer_active+0x17/0x8a
[ 1814.847270] PGD 59c34067
[ 1814.847271] P4D 59c34067
[ 1814.847337] PUD 37374067
[ 1814.847403] PMD 0
[ 1814.847468]
[ 1814.847582] Oops: 0000 [#1] SMP
[ 1814.847655] Modules linked in: sch_netem(O) sch_fq_codel(O)
[ 1814.847761] CPU: 3 PID: 1573 Comm: ip Tainted: G O 4.13.0-rc6+ #62
[ 1814.847884] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 1814.848043] task: ffff88003723a700 task.stack: ffff88005adc8000
[ 1814.848235] RIP: 0010:hrtimer_active+0x17/0x8a
[ 1814.848407] RSP: 0018:ffff88005adcb590 EFLAGS: 00010246
[ 1814.848590] RAX: 0000000000000000 RBX: ffff880058e359d8 RCX: 0000000000000000
[ 1814.848793] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880058e359d8
[ 1814.848998] RBP: ffff88005adcb5b0 R08: 00000000014080c0 R09: 00000000ffffffff
[ 1814.849204] R10: ffff88005adcb660 R11: 0000000000000020 R12: 0000000000000000
[ 1814.849410] R13: ffff880058e359d8 R14: 00000000ffffffff R15: 0000000000000001
[ 1814.849616] FS: 00007f733bbca740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000
[ 1814.849919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1814.850107] CR2: 0000000000000000 CR3: 0000000059f0d000 CR4: 00000000000406e0
[ 1814.850313] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1814.850518] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1814.850723] Call Trace:
[ 1814.850875] hrtimer_try_to_cancel+0x1a/0x93
[ 1814.851047] hrtimer_cancel+0x15/0x20
[ 1814.851211] qdisc_watchdog_cancel+0x12/0x14
[ 1814.851383] netem_reset+0xe6/0xed [sch_netem]
[ 1814.851561] qdisc_destroy+0x8b/0xe5
[ 1814.851723] qdisc_create_dflt+0x86/0x94
[ 1814.851890] ? dev_activate+0x129/0x129
[ 1814.852057] attach_one_default_qdisc+0x36/0x63
[ 1814.852232] netdev_for_each_tx_queue+0x3d/0x48
[ 1814.852406] dev_activate+0x4b/0x129
[ 1814.852569] __dev_open+0xe7/0x104
[ 1814.852730] __dev_change_flags+0xc6/0x15c
[ 1814.852899] dev_change_flags+0x25/0x59
[ 1814.853064] do_setlink+0x30c/0xb3f
[ 1814.853228] ? check_chain_key+0xb0/0xfd
[ 1814.853396] ? check_chain_key+0xb0/0xfd
[ 1814.853565] rtnl_newlink+0x3a4/0x729
[ 1814.853728] ? rtnl_newlink+0x117/0x729
[ 1814.853905] ? ns_capable_common+0xd/0xb1
[ 1814.854072] ? ns_capable+0x13/0x15
[ 1814.854234] rtnetlink_rcv_msg+0x188/0x197
[ 1814.854404] ? rcu_read_unlock+0x3e/0x5f
[ 1814.854572] ? rtnl_newlink+0x729/0x729
[ 1814.854737] netlink_rcv_skb+0x6c/0xce
[ 1814.854902] rtnetlink_rcv+0x23/0x2a
[ 1814.855064] netlink_unicast+0x103/0x181
[ 1814.855230] netlink_sendmsg+0x326/0x337
[ 1814.855398] sock_sendmsg_nosec+0x14/0x3f
[ 1814.855584] sock_sendmsg+0x29/0x2e
[ 1814.855747] ___sys_sendmsg+0x209/0x28b
[ 1814.855912] ? do_raw_spin_unlock+0xcd/0xf8
[ 1814.856082] ? _raw_spin_unlock+0x27/0x31
[ 1814.856251] ? __handle_mm_fault+0x651/0xdb1
[ 1814.856421] ? check_chain_key+0xb0/0xfd
[ 1814.856592] __sys_sendmsg+0x45/0x63
[ 1814.856755] ? __sys_sendmsg+0x45/0x63
[ 1814.856923] SyS_sendmsg+0x19/0x1b
[ 1814.857083] entry_SYSCALL_64_fastpath+0x23/0xc2
[ 1814.857256] RIP: 0033:0x7f733b2dd690
[ 1814.857419] RSP: 002b:00007ffe1d3387d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 1814.858238] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f733b2dd690
[ 1814.858445] RDX: 0000000000000000 RSI: 00007ffe1d338820 RDI: 0000000000000003
[ 1814.858651] RBP: ffff88005adcbf98 R08: 0000000000000001 R09: 0000000000000003
[ 1814.858856] R10: 00007ffe1d3385a0 R11: 0000000000000246 R12: 0000000000000002
[ 1814.859060] R13: 000000000066f1a0 R14: 00007ffe1d3408d0 R15: 0000000000000000
[ 1814.859267] ? trace_hardirqs_off_caller+0xa7/0xcf
[ 1814.859446] Code: 10 55 48 89 c7 48 89 e5 e8 45 a1 fb ff 31 c0 5d c3
31 c0 c3 66 66 66 66 90 55 48 89 e5 41 56 41 55 41 54 53 49 89 fd 49 8b
45 30 <4c> 8b 20 41 8b 5c 24 38 31 c9 31 d2 48 c7 c7 50 8e 1d 82 41 89
[ 1814.860022] RIP: hrtimer_active+0x17/0x8a RSP: ffff88005adcb590
[ 1814.860214] CR2: 0000000000000000
Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Fixes: 0fbbeb1ba43b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is very unlikely to happen but the backlogs memory allocation
could fail and will free q->flows, but then ->destroy() will free
q->flows too. For correctness remove the first free and let ->destroy
clean up.
Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CBQ can fail on ->init by wrong nl attributes or simply for missing any,
f.e. if it's set as a default qdisc then TCA_OPTIONS (opt) will be NULL
when it is activated. The first thing init does is parse opt but it will
dereference a null pointer if used as a default qdisc, also since init
failure at default qdisc invokes ->reset() which cancels all timers then
we'll also dereference two more null pointers (timer->base) as they were
never initialized.
To reproduce:
$ sysctl net.core.default_qdisc=cbq
$ ip l set ethX up
Crash log of the first null ptr deref:
[44727.907454] BUG: unable to handle kernel NULL pointer dereference at (null)
[44727.907600] IP: cbq_init+0x27/0x205
[44727.907676] PGD 59ff4067
[44727.907677] P4D 59ff4067
[44727.907742] PUD 59c70067
[44727.907807] PMD 0
[44727.907873]
[44727.907982] Oops: 0000 [#1] SMP
[44727.908054] Modules linked in:
[44727.908126] CPU: 1 PID: 21312 Comm: ip Not tainted 4.13.0-rc6+ #60
[44727.908235] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[44727.908477] task: ffff88005ad42700 task.stack: ffff880037214000
[44727.908672] RIP: 0010:cbq_init+0x27/0x205
[44727.908838] RSP: 0018:ffff8800372175f0 EFLAGS: 00010286
[44727.909018] RAX: ffffffff816c3852 RBX: ffff880058c53800 RCX: 0000000000000000
[44727.909222] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff8800372175f8
[44727.909427] RBP: ffff880037217650 R08: ffffffff81b0f380 R09: 0000000000000000
[44727.909631] R10: ffff880037217660 R11: 0000000000000020 R12: ffffffff822a44c0
[44727.909835] R13: ffff880058b92000 R14: 00000000ffffffff R15: 0000000000000001
[44727.910040] FS: 00007ff8bc583740(0000) GS:ffff88005d880000(0000) knlGS:0000000000000000
[44727.910339] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[44727.910525] CR2: 0000000000000000 CR3: 00000000371e5000 CR4: 00000000000406e0
[44727.910731] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[44727.910936] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[44727.911141] Call Trace:
[44727.911291] ? lockdep_init_map+0xb6/0x1ba
[44727.911461] ? qdisc_alloc+0x14e/0x187
[44727.911626] qdisc_create_dflt+0x7a/0x94
[44727.911794] ? dev_activate+0x129/0x129
[44727.911959] attach_one_default_qdisc+0x36/0x63
[44727.912132] netdev_for_each_tx_queue+0x3d/0x48
[44727.912305] dev_activate+0x4b/0x129
[44727.912468] __dev_open+0xe7/0x104
[44727.912631] __dev_change_flags+0xc6/0x15c
[44727.912799] dev_change_flags+0x25/0x59
[44727.912966] do_setlink+0x30c/0xb3f
[44727.913129] ? check_chain_key+0xb0/0xfd
[44727.913294] ? check_chain_key+0xb0/0xfd
[44727.913463] rtnl_newlink+0x3a4/0x729
[44727.913626] ? rtnl_newlink+0x117/0x729
[44727.913801] ? ns_capable_common+0xd/0xb1
[44727.913968] ? ns_capable+0x13/0x15
[44727.914131] rtnetlink_rcv_msg+0x188/0x197
[44727.914300] ? rcu_read_unlock+0x3e/0x5f
[44727.914465] ? rtnl_newlink+0x729/0x729
[44727.914630] netlink_rcv_skb+0x6c/0xce
[44727.914796] rtnetlink_rcv+0x23/0x2a
[44727.914956] netlink_unicast+0x103/0x181
[44727.915122] netlink_sendmsg+0x326/0x337
[44727.915291] sock_sendmsg_nosec+0x14/0x3f
[44727.915459] sock_sendmsg+0x29/0x2e
[44727.915619] ___sys_sendmsg+0x209/0x28b
[44727.915784] ? do_raw_spin_unlock+0xcd/0xf8
[44727.915954] ? _raw_spin_unlock+0x27/0x31
[44727.916121] ? __handle_mm_fault+0x651/0xdb1
[44727.916290] ? check_chain_key+0xb0/0xfd
[44727.916461] __sys_sendmsg+0x45/0x63
[44727.916626] ? __sys_sendmsg+0x45/0x63
[44727.916792] SyS_sendmsg+0x19/0x1b
[44727.916950] entry_SYSCALL_64_fastpath+0x23/0xc2
[44727.917125] RIP: 0033:0x7ff8bbc96690
[44727.917286] RSP: 002b:00007ffc360991e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[44727.917579] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007ff8bbc96690
[44727.917783] RDX: 0000000000000000 RSI: 00007ffc36099230 RDI: 0000000000000003
[44727.917987] RBP: ffff880037217f98 R08: 0000000000000001 R09: 0000000000000003
[44727.918190] R10: 00007ffc36098fb0 R11: 0000000000000246 R12: 0000000000000006
[44727.918393] R13: 000000000066f1a0 R14: 00007ffc360a12e0 R15: 0000000000000000
[44727.918597] ? trace_hardirqs_off_caller+0xa7/0xcf
[44727.918774] Code: 41 5f 5d c3 66 66 66 66 90 55 48 8d 56 04 45 31 c9
49 c7 c0 80 f3 b0 81 48 89 e5 41 55 41 54 53 48 89 fb 48 8d 7d a8 48 83
ec 48 <0f> b7 0e be 07 00 00 00 83 e9 04 e8 e6 f7 d8 ff 85 c0 0f 88 bb
[44727.919332] RIP: cbq_init+0x27/0x205 RSP: ffff8800372175f0
[44727.919516] CR2: 0000000000000000
Fixes: 0fbbeb1ba43b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Depending on where ->init fails we can get a null pointer deref due to
uninitialized hires timer (watchdog) or a double free of the qdisc hash
because it is already freed by ->destroy().
Fixes: 8d5537387505 ("net/sched/hfsc: allocate tcf block for hfsc root class")
Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If sch_hhf fails in its ->init() function (either due to wrong
user-space arguments as below or memory alloc failure of hh_flows) it
will do a null pointer deref of q->hh_flows in its ->destroy() function.
To reproduce the crash:
$ tc qdisc add dev eth0 root hhf quantum 2000000 non_hh_weight 10000000
Crash log:
[ 690.654882] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 690.655565] IP: hhf_destroy+0x48/0xbc
[ 690.655944] PGD 37345067
[ 690.655948] P4D 37345067
[ 690.656252] PUD 58402067
[ 690.656554] PMD 0
[ 690.656857]
[ 690.657362] Oops: 0000 [#1] SMP
[ 690.657696] Modules linked in:
[ 690.658032] CPU: 3 PID: 920 Comm: tc Not tainted 4.13.0-rc6+ #57
[ 690.658525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 690.659255] task: ffff880058578000 task.stack: ffff88005acbc000
[ 690.659747] RIP: 0010:hhf_destroy+0x48/0xbc
[ 690.660146] RSP: 0018:ffff88005acbf9e0 EFLAGS: 00010246
[ 690.660601] RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000
[ 690.661155] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff821f63f0
[ 690.661710] RBP: ffff88005acbfa08 R08: ffffffff81b10a90 R09: 0000000000000000
[ 690.662267] R10: 00000000f42b7019 R11: ffff880058578000 R12: 00000000ffffffea
[ 690.662820] R13: ffff8800372f6400 R14: 0000000000000000 R15: 0000000000000000
[ 690.663769] FS: 00007f8ae5e8b740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000
[ 690.667069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 690.667965] CR2: 0000000000000000 CR3: 0000000058523000 CR4: 00000000000406e0
[ 690.668918] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 690.669945] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 690.671003] Call Trace:
[ 690.671743] qdisc_create+0x377/0x3fd
[ 690.672534] tc_modify_qdisc+0x4d2/0x4fd
[ 690.673324] rtnetlink_rcv_msg+0x188/0x197
[ 690.674204] ? rcu_read_unlock+0x3e/0x5f
[ 690.675091] ? rtnl_newlink+0x729/0x729
[ 690.675877] netlink_rcv_skb+0x6c/0xce
[ 690.676648] rtnetlink_rcv+0x23/0x2a
[ 690.677405] netlink_unicast+0x103/0x181
[ 690.678179] netlink_sendmsg+0x326/0x337
[ 690.678958] sock_sendmsg_nosec+0x14/0x3f
[ 690.679743] sock_sendmsg+0x29/0x2e
[ 690.680506] ___sys_sendmsg+0x209/0x28b
[ 690.681283] ? __handle_mm_fault+0xc7d/0xdb1
[ 690.681915] ? check_chain_key+0xb0/0xfd
[ 690.682449] __sys_sendmsg+0x45/0x63
[ 690.682954] ? __sys_sendmsg+0x45/0x63
[ 690.683471] SyS_sendmsg+0x19/0x1b
[ 690.683974] entry_SYSCALL_64_fastpath+0x23/0xc2
[ 690.684516] RIP: 0033:0x7f8ae529d690
[ 690.685016] RSP: 002b:00007fff26d2d6b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 690.685931] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f8ae529d690
[ 690.686573] RDX: 0000000000000000 RSI: 00007fff26d2d700 RDI: 0000000000000003
[ 690.687047] RBP: ffff88005acbff98 R08: 0000000000000001 R09: 0000000000000000
[ 690.687519] R10: 00007fff26d2d480 R11: 0000000000000246 R12: 0000000000000002
[ 690.687996] R13: 0000000001258070 R14: 0000000000000001 R15: 0000000000000000
[ 690.688475] ? trace_hardirqs_off_caller+0xa7/0xcf
[ 690.688887] Code: 00 00 e8 2a 02 ae ff 49 8b bc 1d 60 02 00 00 48 83
c3 08 e8 19 02 ae ff 48 83 fb 20 75 dc 45 31 f6 4d 89 f7 4d 03 bd 20 02
00 00 <49> 8b 07 49 39 c7 75 24 49 83 c6 10 49 81 fe 00 40 00 00 75 e1
[ 690.690200] RIP: hhf_destroy+0x48/0xbc RSP: ffff88005acbf9e0
[ 690.690636] CR2: 0000000000000000
Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The below commit added a call to ->destroy() on init failure, but multiq
still frees ->queues on error in init, but ->queues is also freed by
->destroy() thus we get double free and corrupted memory.
Very easy to reproduce (eth0 not multiqueue):
$ tc qdisc add dev eth0 root multiq
RTNETLINK answers: Operation not supported
$ ip l add dumdum type dummy
(crash)
Trace log:
[ 3929.467747] general protection fault: 0000 [#1] SMP
[ 3929.468083] Modules linked in:
[ 3929.468302] CPU: 3 PID: 967 Comm: ip Not tainted 4.13.0-rc6+ #56
[ 3929.468625] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 3929.469124] task: ffff88003716a700 task.stack: ffff88005872c000
[ 3929.469449] RIP: 0010:__kmalloc_track_caller+0x117/0x1be
[ 3929.469746] RSP: 0018:ffff88005872f6a0 EFLAGS: 00010246
[ 3929.470042] RAX: 00000000000002de RBX: 0000000058a59000 RCX: 00000000000002df
[ 3929.470406] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff821f7020
[ 3929.470770] RBP: ffff88005872f6e8 R08: 000000000001f010 R09: 0000000000000000
[ 3929.471133] R10: ffff88005872f730 R11: 0000000000008cdd R12: ff006d75646d7564
[ 3929.471496] R13: 00000000014000c0 R14: ffff88005b403c00 R15: ffff88005b403c00
[ 3929.471869] FS: 00007f0b70480740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000
[ 3929.472286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3929.472677] CR2: 00007ffcee4f3000 CR3: 0000000059d45000 CR4: 00000000000406e0
[ 3929.473209] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3929.474109] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 3929.474873] Call Trace:
[ 3929.475337] ? kstrdup_const+0x23/0x25
[ 3929.475863] kstrdup+0x2e/0x4b
[ 3929.476338] kstrdup_const+0x23/0x25
[ 3929.478084] __kernfs_new_node+0x28/0xbc
[ 3929.478478] kernfs_new_node+0x35/0x55
[ 3929.478929] kernfs_create_link+0x23/0x76
[ 3929.479478] sysfs_do_create_link_sd.isra.2+0x85/0xd7
[ 3929.480096] sysfs_create_link+0x33/0x35
[ 3929.480649] device_add+0x200/0x589
[ 3929.481184] netdev_register_kobject+0x7c/0x12f
[ 3929.481711] register_netdevice+0x373/0x471
[ 3929.482174] rtnl_newlink+0x614/0x729
[ 3929.482610] ? rtnl_newlink+0x17f/0x729
[ 3929.483080] rtnetlink_rcv_msg+0x188/0x197
[ 3929.483533] ? rcu_read_unlock+0x3e/0x5f
[ 3929.483984] ? rtnl_newlink+0x729/0x729
[ 3929.484420] netlink_rcv_skb+0x6c/0xce
[ 3929.484858] rtnetlink_rcv+0x23/0x2a
[ 3929.485291] netlink_unicast+0x103/0x181
[ 3929.485735] netlink_sendmsg+0x326/0x337
[ 3929.486181] sock_sendmsg_nosec+0x14/0x3f
[ 3929.486614] sock_sendmsg+0x29/0x2e
[ 3929.486973] ___sys_sendmsg+0x209/0x28b
[ 3929.487340] ? do_raw_spin_unlock+0xcd/0xf8
[ 3929.487719] ? _raw_spin_unlock+0x27/0x31
[ 3929.488092] ? __handle_mm_fault+0x651/0xdb1
[ 3929.488471] ? check_chain_key+0xb0/0xfd
[ 3929.488847] __sys_sendmsg+0x45/0x63
[ 3929.489206] ? __sys_sendmsg+0x45/0x63
[ 3929.489576] SyS_sendmsg+0x19/0x1b
[ 3929.489901] entry_SYSCALL_64_fastpath+0x23/0xc2
[ 3929.490172] RIP: 0033:0x7f0b6fb93690
[ 3929.490423] RSP: 002b:00007ffcee4ed588 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 3929.490881] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f0b6fb93690
[ 3929.491198] RDX: 0000000000000000 RSI: 00007ffcee4ed5d0 RDI: 0000000000000003
[ 3929.491521] RBP: ffff88005872ff98 R08: 0000000000000001 R09: 0000000000000000
[ 3929.491801] R10: 00007ffcee4ed350 R11: 0000000000000246 R12: 0000000000000002
[ 3929.492075] R13: 000000000066f1a0 R14: 00007ffcee4f5680 R15: 0000000000000000
[ 3929.492352] ? trace_hardirqs_off_caller+0xa7/0xcf
[ 3929.492590] Code: 8b 45 c0 48 8b 45 b8 74 17 48 8b 4d c8 83 ca ff 44
89 ee 4c 89 f7 e8 83 ca ff ff 49 89 c4 eb 49 49 63 56 20 48 8d 48 01 4d
8b 06 <49> 8b 1c 14 48 89 c2 4c 89 e0 65 49 0f c7 08 0f 94 c0 83 f0 01
[ 3929.493335] RIP: __kmalloc_track_caller+0x117/0x1be RSP: ffff88005872f6a0
Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Fixes: f07d1501292b ("multiq: Further multiqueue cleanup")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commit below added a call to the ->destroy() callback for all qdiscs
which failed in their ->init(), but some were not prepared for such
change and can't handle partially initialized qdisc. HTB is one of them
and if any error occurs before the qdisc watchdog timer and qdisc work are
initialized then we can hit either a null ptr deref (timer->base) when
canceling in ->destroy or lockdep error info about trying to register
a non-static key and a stack dump. So to fix these two move the watchdog
timer and workqueue init before anything that can err out.
To reproduce userspace needs to send broken htb qdisc create request,
tested with a modified tc (q_htb.c).
Trace log:
[ 2710.897602] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 2710.897977] IP: hrtimer_active+0x17/0x8a
[ 2710.898174] PGD 58fab067
[ 2710.898175] P4D 58fab067
[ 2710.898353] PUD 586c0067
[ 2710.898531] PMD 0
[ 2710.898710]
[ 2710.899045] Oops: 0000 [#1] SMP
[ 2710.899232] Modules linked in:
[ 2710.899419] CPU: 1 PID: 950 Comm: tc Not tainted 4.13.0-rc6+ #54
[ 2710.899646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[ 2710.900035] task: ffff880059ed2700 task.stack: ffff88005ad4c000
[ 2710.900262] RIP: 0010:hrtimer_active+0x17/0x8a
[ 2710.900467] RSP: 0018:ffff88005ad4f960 EFLAGS: 00010246
[ 2710.900684] RAX: 0000000000000000 RBX: ffff88003701e298 RCX: 0000000000000000
[ 2710.900933] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003701e298
[ 2710.901177] RBP: ffff88005ad4f980 R08: 0000000000000001 R09: 0000000000000001
[ 2710.901419] R10: ffff88005ad4f800 R11: 0000000000000400 R12: 0000000000000000
[ 2710.901663] R13: ffff88003701e298 R14: ffffffff822a4540 R15: ffff88005ad4fac0
[ 2710.901907] FS: 00007f2f5e90f740(0000) GS:ffff88005d880000(0000) knlGS:0000000000000000
[ 2710.902277] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2710.902500] CR2: 0000000000000000 CR3: 0000000058ca3000 CR4: 00000000000406e0
[ 2710.902744] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2710.902977] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2710.903180] Call Trace:
[ 2710.903332] hrtimer_try_to_cancel+0x1a/0x93
[ 2710.903504] hrtimer_cancel+0x15/0x20
[ 2710.903667] qdisc_watchdog_cancel+0x12/0x14
[ 2710.903866] htb_destroy+0x2e/0xf7
[ 2710.904097] qdisc_create+0x377/0x3fd
[ 2710.904330] tc_modify_qdisc+0x4d2/0x4fd
[ 2710.904511] rtnetlink_rcv_msg+0x188/0x197
[ 2710.904682] ? rcu_read_unlock+0x3e/0x5f
[ 2710.904849] ? rtnl_newlink+0x729/0x729
[ 2710.905017] netlink_rcv_skb+0x6c/0xce
[ 2710.905183] rtnetlink_rcv+0x23/0x2a
[ 2710.905345] netlink_unicast+0x103/0x181
[ 2710.905511] netlink_sendmsg+0x326/0x337
[ 2710.905679] sock_sendmsg_nosec+0x14/0x3f
[ 2710.905847] sock_sendmsg+0x29/0x2e
[ 2710.906010] ___sys_sendmsg+0x209/0x28b
[ 2710.906176] ? do_raw_spin_unlock+0xcd/0xf8
[ 2710.906346] ? _raw_spin_unlock+0x27/0x31
[ 2710.906514] ? __handle_mm_fault+0x651/0xdb1
[ 2710.906685] ? check_chain_key+0xb0/0xfd
[ 2710.906855] __sys_sendmsg+0x45/0x63
[ 2710.907018] ? __sys_sendmsg+0x45/0x63
[ 2710.907185] SyS_sendmsg+0x19/0x1b
[ 2710.907344] entry_SYSCALL_64_fastpath+0x23/0xc2
Note that probably this bug goes further back because the default qdisc
handling always calls ->destroy on init failure too.
Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Fixes: 0fbbeb1ba43b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Two fixes (a vmwgfx and core drm fix) in the queue for 4.13 final,
hopefully that is it"
* tag 'drm-fixes-for-v4.13-rc8' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: Fix F26 Wayland screen update issue
drm/bridge/sii8620: Fix memory corruption
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three minor fixes: a NULL deref in qedf, an off by one in sg and a fix
to IPR to prevent an error on initialisation"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedf: Fix a potential NULL pointer dereference
scsi: sg: off by one in sg_ioctl()
scsi: ipr: Set no_report_opcodes for RAID arrays
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML fix from Richard Weinberger:
"This contains a single fix for a regression which was introduced while
the merge window"
* 'for-linus-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Fix check for _xstate for older hosts
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha update from Matt Turner:
"A few fixes and wires up some additional syscalls."
[ Some of this is technically not really rc7 material, but it's alpha,
and it all looks safe anyway. Matt explains: "My alpha has been
offline, hence the very late-in-cycle pull request" and hasn't caused
problems before, so he gets to slide. - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: uapi: Add support for __SANE_USERSPACE_TYPES__
alpha: Define ioremap_wc
alpha: Fix section mismatches
alpha: support R_ALPHA_REFLONG relocations for module loading
alpha: Fix typo in ev6-copy_user.S
alpha: Package string routines together
alpha: Update for new syscalls
alpha: Fix build error without CONFIG_VGA_HOSE.
|
|
Recent patch had an endian warning ie
cifs: return ENAMETOOLONG for overlong names in cifs_open()/cifs_lookup()
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Currently the maximum size of SMB2/3 header is set incorrectly which
leads to hanging of directory listing operations on encrypted SMB3
connections. Fix this by setting the maximum size to 170 bytes that
is calculated as RFC1002 length field size (4) + transform header
size (52) + SMB2 header size (64) + create response size (56).
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
|
|
cq_period_mode assignment was mistakenly removed so it was always set to "0",
which is EQE based moderation, regardless of the device CAPs and
requested value in ethtool.
Fixes: 6a9764efb255 ("net/mlx5e: Isolate open_channels from priv->params")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Fix inline header size, make sure it is not greater than skb len.
This bug effects small packets, for example L2 packets with size < 18.
Fixes: ae76715d153e ("net/mlx5e: Check the minimum inline header mode before xmit")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When changing from switchdev to legacy mode, all the representor port
devices (uplink nic and reps) are cleaned up. Part of this cleaning
process is removing the neigh entries and the hash table containing them.
However, a representor neigh entry might be linked to the uplink port
hash table and if the uplink nic is cleaned first the cleaning of the
representor will end up in null deref.
Fix that by unloading the representors in the opposite order of load.
Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors")
Signed-off-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Currently if vxlan tunnel ipv6 src isn't supplied the driver fails to
resolve it as part of the route lookup. The resulting encap header
is left with a zeroed out ipv6 src address so the packets are sent
with this src ip.
Use an appropriate route lookup API that also resolves the source
ipv6 address if it's not supplied.
Fixes: ce99f6b97fcd ('net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Currently, increasing the number of combined channels is changing
the RSS spread to use the new created channels.
Prevent the RSS spread change in case the user explicitly declare it,
to avoid overriding user configuration.
Tested:
when RSS default:
# ethtool -L ens8 combined 4
RSS spread will change and point to 4 channels.
# ethtool -X ens8 equal 4
# ethtool -L ens8 combined 6
RSS will not change after increasing the number of the channels.
Fixes: 8bf368620486 ('ethtool: ensure channel counts are within bounds during SCHANNELS')
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Function mlx5e_dealloc_rx_wqe is using page pointer value as an
indication to valid DMA mapping. In case that the mapping failed, we
released the page but kept the dangling pointer. Store the page pointer
only after the DMA mapping passed to avoid invalid page DMA unmap.
Fixes: bc77b240b3c5 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
MLX5_INTERFACE_STATE_SHUTDOWN is not used in the code.
Fixes: 5fc7197d3a25 ("net/mlx5: Add pci shutdown callback")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
There is an issue where the firmware fails during mlx5_load_one,
the health_care timer detects the issue and schedules a health_care call.
Then the mlx5_load_one detects the issue, cleans up and quits. Then
the health_care starts and calls mlx5_unload_one to clean up the resources
that no longer exist and causes kernel panic.
The root cause is that the bit MLX5_INTERFACE_STATE_DOWN is not set
after mlx5_load_one fails. The solution is removing the bit
MLX5_INTERFACE_STATE_DOWN and quit mlx5_unload_one if the
bit MLX5_INTERFACE_STATE_UP is not set. The bit MLX5_INTERFACE_STATE_DOWN
is redundant and we can use MLX5_INTERFACE_STATE_UP instead.
Fixes: 5fc7197d3a25 ("net/mlx5: Add pci shutdown callback")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Support for ISSI version 0 was recently broken as the arm_srq_cmd
command, which is used only for ISSI version 0, was given the opcode
for ISSI version 1 instead of ISSI version 0.
Change arm_srq_cmd to use the correct command opcode for ISSI version
0.
Fixes: af1ba291c5e4 ('{net, IB}/mlx5: Refactor internal SRQ API')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Current code doesn't report DCB_CAP_DCBX_HOST capability when query
through getcap. User space lldptool expects capability to have HOST mode
set when it wants to configure DCBX CEE mode. In absence of HOST mode
capability, lldptool fails to switch to CEE mode.
This fix returns DCB_CAP_DCBX_HOST capability when port's DCBX
controlled mode is under software control.
Fixes: 3a6a931dfb8e ("net/mlx5e: Support DCBX CEE API")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
qos capability is the master capability bit that determines
if the DCBX is supported for the PCI function. If this bit is off,
driver cannot run any dcbx code.
Fixes: e207b7e99176 ("net/mlx5e: ConnectX-4 firmware support for DCBX")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
snd_soc_of_parse_card_name() doesn't return an error if the requested
property isn't present, but silently fails to fill the card name. This can
not be changed, as it is a backwards compatibility measure itself.
We can not rely on the return value of this function alone, but must check
if the card name has been filled sucessfully when deciding to skip the
fallback path, which is in place for existing users.
Fixes: dedfaa1eedc7 (ASoC: simple-card-utils: enable "label" on
asoc_simple_card_parse_card_name)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It is quite common for ti_cm_get_macid() to fail on some of the
platforms it is invoked on. They include any platform where
mac address is not part of SoC register space.
On these platforms, mac address is read and populated in
device-tree by bootloader. An example is TI DA850.
Downgrade the severity of message to "information", so it does
not spam logs when 'quiet' boot is desired.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull NVMe fixes from Christoph:
"Three more fixes for 4.13 below:
- fix the incorrect bit for the doorbell buffer features (Changpeng Liu)
- always use a 4k MR page size for RDMA, to not get in trouble with
offset in non-4k page size systems (no-op for x86) (Max Gurtovoy)
- and a fix for the new nvme host memory buffer support to keep the
descriptor list DMA mapped when the buffer is enabled (me)"
|
|
PCM OSS emulation issues the drain ioctl without power lock. It used
to work in the earlier kernels as the power lock was taken inside
snd_pcm_drain() itself. But since 68b4acd32249 ("ALSA: pcm: Apply
power lock globally to common ioctls"), the power lock is taken
outside the function. Due to that change, the call via OSS emulation
leads to the unbalanced power lock, thus it deadlocks.
As a quick fix, just take the power lock before snd_pcm_drain() call
for OSS emulation path. A better cleanup will follow later.
Fixes: 68b4acd32249 ("ALSA: pcm: Apply power lock globally to common ioctls")
Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
NVMe 1.3 specification defines the Optional Admin Command Support feature
flags, bit 8 set to '1' then the controller supports the Doorbell Buffer
Config command. Bit 7 is used for Virtualization Mangement command.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: f9f38e33 ("nvme: improve performance for virtual NVMe devices")
Cc: stable@vger.kernel.org
|
|
The NVMe 1.3 specification says in section 5.21.1.13:
"After a successful completion of a Set Features enabling the host memory
buffer, the host shall not write to the associated host memory region,
buffer size, or descriptor list until the host memory buffer has been
disabled."
While this doesn't state that the descriptor list must remain accessible
to the device it certainly implies it must remaing readable by the device.
So switch to a dma coherent allocation for the descriptor list just to be
safe - it's not like the cost for it matters compared to the actual
memory buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: 87ad72a59a38 ("nvme-pci: implement host memory buffer support")
|
|
Due to various page sizes in the system (IOMMU/device/kernel), we
set the fabrics controller page size to 4k and block layer boundaries
accordinglly. In architectures that uses different kernel page size
we'll have a mismatch to the MR page size that may cause a mapping error.
Update the MR page size to correspond to the core ctrl settings.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Xenon sdh controller requests proper SD bus voltage select
bits programmed even with vmmc power supply. Any reserved
value(100b-000b) programmed in this field will lead to controller
ignore SD bus power bit and keep its value at zero.
Add set_power callback to handle this.
Signed-off-by: Zhoujie Wu <zjwu@marvell.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Commit 2a842acab109 ("block: introduce new block status code type") changed
the error type but not in patches merged through the mmc tree, like
commit 0493f6fe5bde ("mmc: block: Move boot partition locking into a driver
op"). Fix one error code that is incorrect and also use BLK_STS_OK in
preference to 0.
Fixes: 17ece345a042 ("Merge tag 'mmc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://people.freedesktop.org/~syeh/repos_linux into drm-fixes
Single vmwgfx fix.
* 'drm-vmwgfx-fixes' of git://people.freedesktop.org/~syeh/repos_linux:
drm/vmwgfx: Fix F26 Wayland screen update issue
|
|
The phy is connected at early stage of probe but not properly
disconnected if error occurs. This patch fixes the issue.
Also changing the return type of xgene_enet_check_phy_handle(),
since this function always returns success.
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both the nfp_net_pf_app_start() and the nfp_net_pci_probe() functions
call nfp_net_pf_app_stop_ctrl(pf) so there is a double free. The free
should be done from the probe function because it's allocated there so
I have removed the call from nfp_net_pf_app_start().
Fixes: 02082701b974 ("nfp: create control vNICs and wire up rx/tx")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pavel Belous says:
====================
net:ethernet:aquantia: Atlantic driver Update 2017-08-23
This series contains updates for aQuantia Atlantic driver.
It has bugfixes and some improvements.
Changes in v2:
- "MCP state change" fix removed (will be sent as
a separate fix after further investigation.)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We should inform user about wrong firmware version
by printing message in dmesg.
Fixes: 3d2ff7eebe26 ("net: ethernet: aquantia: Atlantic hardware abstraction layer")
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the HW supports up to 32 multicast filters we should
track count of multicast filters to avoid overflow.
If we attempt to add >32 multicast filter - just set NETIF_ALLMULTI flag
instead.
Fixes: 94f6c9e4cdf6 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Igor Russkikh <Igor.Russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver choose the optimal interrupt throttling settings depends
of current link speed.
Due this bug link_status field from aq_hw is never updated and as result
always used same interrupt throttling values.
Fixes: 3d2ff7eebe26 ("net: ethernet: aquantia: Atlantic hardware abstraction layer")
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The hardware has the HW Checksum Offload bug when small
TCP patckets (with length <= 60 bytes) has wrong "checksum valid" bit.
The solution is - ignore checksum valid bit for small packets
(with length <= 60 bytes) and mark this as CHECKSUM_NONE to allow
network stack recalculate checksum itself.
Fixes: ccf9a5ed14be ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.")
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The number of RSS queues should be not more than numbers of CPU.
Its does not make sense to increase perfomance, and also cause problems on
some motherboards.
Fixes: 94f6c9e4cdf6 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes datapath spinlocks which does not perform any
useful work.
Fixes: 6e70637f9f1e ("net: ethernet: aquantia: Add ring support code")
Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
... which may happen with certain values of tp_reserve and maclen.
Fixes: 58d19b19cd99 ("packet: vnet_hdr support for tpacket_rcv")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
