summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-06-08media: atmel: atmel-isc: add RLP to register offsetsEugen Hristev
The RLP submodule is a part of the atmel-isc pipeline, and stands for Rounding,Limiting and Packaging. It used to extract specific data from the ISC pipeline. For example if we want to output greyscale 8 bit, we would use limiting to 8 bits, and packaging to Luma component only. Add rlp to the reg offsets struct. This will allow different products to have a different reg offset for this particular module. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: atmel: atmel-isc: add SUB422 and SUB420 to register offsetsEugen Hristev
The SUB submodules are a part of the atmel-isc pipeline, and stand for Subsampling. They are used to subsample the original YUV 4:4:4 pixel ratio aspect to either 4:2:2 or 4:2:0. Add sub420 and sub422 to the reg offsets struct. This will allow different products to have a different reg offset for these particular modules. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: atmel: atmel-isc: add CBC to the reg offsets structEugen Hristev
The CBC submodule is a part of the atmel-isc pipeline, and stands for Contrast Brightness Control. It is used to apply gains and offsets to the luma (Y) and chroma (U, V) components of the YUV elements. Add cbc to the reg offsets struct. This will allow different products to have a different reg offset for this particular module. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: atmel: atmel-isc: extract CBC submodule config into separate functionEugen Hristev
The CBC submodule is a part of the atmel-isc pipeline, and stands for Contrast Brightness Control. It is used to apply gains and offsets to the luma (Y) and chroma (U, V) components of the YUV elements. The CBC submodule should be initialized in the product specific driver as it's product specific. Other products can implement it differently [hverkuil: made isc_sama5d2_config_cbc static] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: atmel: atmel-isc: create register offsets structEugen Hristev
Create a struct that holds register offsets that are product specific. Add initially the CSC register. This allows each product that contains a variant of the ISC to add their own register offset. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: atmel: atmel-isc-base: add id to clock debug messageEugen Hristev
Add the clock id to the debug message regarding clock setup Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: atmel: atmel-isc: extract CSC submodule config into separate functionEugen Hristev
The CSC submodule is a part of the atmel-isc pipeline, and stands for Color Space Conversion. It is used to apply a matrix transformation to RGB pixels to convert them to the YUV components. The CSC submodule should be initialized in the product specific driver as it's product specific. Other products can implement it differently. [hverkuil: made isc_sama5d2_config_csc static] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: atmel: atmel-isc: specialize dma cfgEugen Hristev
The dma configuration (DCFG) is specific to the product. Move this configuration in the product specific driver, and add the field inside the driver struct. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: atmel: atmel-isc: specialize max width and max heightEugen Hristev
Move the max width and max height constants to the product specific driver and have them in the device struct. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: atmel: atmel-isc: add checks for limiting frame sizesEugen Hristev
When calling the subdev, certain subdev drivers will overwrite the frame size and adding sizes which are beyond the ISC's capabilities. Thus we need to ensure the frame size is cropped to the maximum caps. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: atmel: atmel-isc: specialize driver name constantEugen Hristev
The driver name constant must defined based on product driver, thus moving the constant directly where it's required. This will allow each ISC based product to define it's own name. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: atmel: atmel-isc: specialize gamma table into product specificEugen Hristev
Separate the gamma table from the isc base file into the specific sama5d2 product file. Add a pointer to the gamma table and entries count inside the platform driver specific struct. [hverkuil: made isc_sama5d2_gamma_table static] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: hevc: Add sps_max_sub_layers_minus1 to v4l2_ctrl_hevc_spsJohn Cox
sps_max_sub_layers_minus1 is needed if the driver wishes to determine whether or not a frame might be used for reference. Signed-off-by: John Cox <jc@kynesim.co.uk> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: vivid: use vb2_queue_change_typeTomi Valkeinen
Use the new vb2_queue_change_type() function in .vidioc_reqbufs and .vidioc_create_bufs instead of changing the queue type manually in vidioc_s_fmt_vbi_cap() and vidioc_s_fmt_sliced_vbi_cap(). This allows for a more consistent behavior, as .vidioc_reqbufs and .vidioc_create_bufs are when the queue will become "busy". Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: vivid: remove stream_sliced_vbi_cap fieldTomi Valkeinen
Vivid tracks the VBI capture mode in vivid_dev->stream_sliced_vbi_cap field. We can just look at the buffer type instead, and drop the field. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08media: videobuf2-v4l2.c: add vb2_queue_change_type() helperTomi Valkeinen
On some platforms a video device can capture either video data or metadata. The driver can implement vidioc functions for both video and metadata, and use a single vb2_queue for the buffers. However, vb2_queue requires choosing a single buffer type, which conflicts with the idea of capturing either video or metadata. The buffer type of vb2_queue can be changed, but it's not obvious how this should be done in the drivers. To help this, add a new helper function vb2_queue_change_type() which ensures the correct checks and documents how it can be used. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-04media: pci: tw5864: avoid usage of some charactersMauro Carvalho Chehab
There are several comments on this driver using those chars: - U+2013 ('–'): EN DASH - U+2018 ('‘'): LEFT SINGLE QUOTATION MARK - U+2019 ('’'): RIGHT SINGLE QUOTATION MARK They probably came from cut-and-pasting some texts found elsewhere. While there's nothing wrong on having those on comments in C, it is better to use ASCII chars for those specific cases, as the current variant doesn't really add any value. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-04media: rc: ite-cir: replace some an EN DASHMauro Carvalho Chehab
Instead of using U+2013 ('–'): EN DASH, let's just use an hyphen there, as this was probably introduced by some cut-and-paste from some other place. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-04media: saa7134: drop a NO-BREAK SPACEMauro Carvalho Chehab
There are two spaces on a comment there, being one of them an U+00a0 (' '): NO-BREAK SPACE. Drop it. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-04media: allegro-dvt: avoid EN DASH charMauro Carvalho Chehab
While there's nothing wrong with EN DASH on C code, this probably came from some cut-and paste from an ITU-T table. It sounds better to just an HYPHEN here. Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-04media: rtl28xxu: replace a NO-BREAK SPACE characterMauro Carvalho Chehab
Instead of using: - U+00a0 (' '): NO-BREAK SPACE Use a normal white space. This was probably introduced by some cut-and-paste. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-04media: gspca: ov519: replace RIGHT SINGLE QUOTATION MARKMauro Carvalho Chehab
Replace the occurences of the following character: - U+2019 ('’'): RIGHT SINGLE QUOTATION MARK By a normal single comma character. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-04media: docs: move DVB audio/video docs to stagingMauro Carvalho Chehab
The only upstream driver using the API described there is the av7110 driver. As the driver was moved to staging, move the API bits to staging as well. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-04media: dvb header files: move some headers to stagingMauro Carvalho Chehab
The audio, video and OSD APIs are used upstream only by the av7110 driver, which was moved to staging. So, move the corresponding header files to it. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-04media: ivtv: get rid of DVB deprecated ioctlsMauro Carvalho Chehab
The ivtv driver has gained support a long time ago for audio and video settings via V4L2 API. Let's drop support of the duplicated controls implemented abusing the DVB API. Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02docs: userspace-api: media: dvb: replace some charactersMauro Carvalho Chehab
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST conversion and some cut-and-pasted text contain some characters that aren't easily reachable on standard keyboards and/or could cause troubles when parsed by the documentation build system. Replace the occurences of the following characters: - U+00a0 (' '): NO-BREAK SPACE as it can cause lines being truncated on PDF output - U+2019 ('’'): RIGHT SINGLE QUOTATION MARK - U+201c ('“'): LEFT DOUBLE QUOTATION MARK - U+201d ('”'): RIGHT DOUBLE QUOTATION MARK Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02docs: userspace-api: media: v4l: replace some charactersMauro Carvalho Chehab
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST conversion and some cut-and-pasted text contain some characters that aren't easily reachable on standard keyboards and/or could cause troubles when parsed by the documentation build system. Replace the occurences of the following characters: - U+00a0 (' '): NO-BREAK SPACE as it can cause lines being truncated on PDF output - U+2014 ('—'): EM DASH - U+2019 ('’'): RIGHT SINGLE QUOTATION MARK Note that Sphinx auto-translates '---' into EM DASH. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02docs: userspace-api: media: fdl-appendix.rst: replace some charactersMauro Carvalho Chehab
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST conversion and some cut-and-pasted text contain some characters that aren't easily reachable on standard keyboards and/or could cause troubles when parsed by the documentation build system. Replace the occurences of the following characters: - U+201c ('“'): LEFT DOUBLE QUOTATION MARK - U+201d ('”'): RIGHT DOUBLE QUOTATION MARK Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02docs: driver-api: media: zoran: replace SOFT HYPHEN characterMauro Carvalho Chehab
Replace the occurences of the following character: - U+00ad ('­'): SOFT HYPHEN as ASCII HYPHEN is preferred over SOFT HYPHEN At least with some fonts, a SOFT HYPHEN is displayed as a blank space. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02docs: admin-guide: media: ipu3.rst: replace some charactersMauro Carvalho Chehab
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST conversion and some cut-and-pasted text contain some characters that aren't easily reachable on standard keyboards and/or could cause troubles when parsed by the documentation build system. Replace the occurences of the following characters: - U+201c ('“'): LEFT DOUBLE QUOTATION MARK - U+201d ('”'): RIGHT DOUBLE QUOTATION MARK Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: videobuf-dma-sg: void function return statements are not generally usefullijian
void function videobuf_vm_close return statements are not generally useful, so deleted the return in function videobuf_vm_close(). Signed-off-by: lijian <lijian@yulong.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: v4l2-dev.c: Modified the macro SET_VALID_IOCTLlijian
Macros starting with if should be enclosed by a do - while loop to avoid possible if/else logic defects. So modified the macro SET_VALID_IOCTL with do - while loop. [hverkuil: checkpatch: add parenthesis around 'ops'] Signed-off-by: lijian <lijian@yulong.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: imx: imx7_mipi_csis: Fix error return code in mipi_csis_async_register()Wei Yongjun
Fix to return negative error code -EINVAL from the error handling case instead of 0, as done elsewhere in this function. Fixes: 88fc81388df9 ("media: imx: imx7_mipi_csis: Reject invalid data-lanes settings") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: rtl28xxu: fix zero-length control requestJohan Hovold
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning. Fix the zero-length i2c-read request used for type detection by attempting to read a single byte instead. Reported-by: syzbot+faf11bbadc5a372564da@syzkaller.appspotmail.com Fixes: d0f232e823af ("[media] rtl28xxu: add heuristic to detect chip type") Cc: stable@vger.kernel.org # 4.0 Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: gspca/sunplus: fix zero-length control requestsJohan Hovold
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning. Fix the single zero-length control request which was using the read-register helper, and update the helper so that zero-length reads fail with an error message instead. Fixes: 6a7eba24e4f0 ("V4L/DVB (8157): gspca: all subdrivers") Cc: stable@vger.kernel.org # 2.6.27 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: gspca/gl860: fix zero-length control requestsJohan Hovold
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning. Fix the gl860_RTx() helper so that zero-length control reads fail with an error message instead. Note that there are no current callers that would trigger this. Fixes: 4f7cb8837cec ("V4L/DVB (12954): gspca - gl860: Addition of GL860 based webcams") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: staging: media: tegra-vde: add missing error return code in ↵Yang Yingliang
tegra_vde_probe() Add missing return error code when pm_runtime_resume_and_get() failed. Fixes: dc8276b78917 ("staging: media: tegra-vde: use pm_runtime_resume_and_get()") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: gspca/sq905: fix control-request directionJohan Hovold
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the USB_REQ_SYNCH_FRAME request which erroneously used usb_sndctrlpipe(). Fixes: 27d35fc3fb06 ("V4L/DVB (10639): gspca - sq905: New subdriver.") Cc: stable@vger.kernel.org # 2.6.30 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: dtv5100: fix control-request directionsJohan Hovold
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the control requests which erroneously used usb_rcvctrlpipe(). Fixes: 8466028be792 ("V4L/DVB (8734): Initial support for AME DTV-5100 USB2.0 DVB-T") Cc: stable@vger.kernel.org # 2.6.28 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: vicodec: Use _BITUL() macro in UAPI headersJoe Richey
Replace BIT() in v4l2's UPAI header with _BITUL(). BIT() is not defined in the UAPI headers and its usage may cause userspace build errors. Fixes: 206bc0f6fb94 ("media: vicodec: mark the stateless FWHT API as stable") Signed-off-by: Joe Richey <joerichey@google.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: uapi/linux/cec-funcs.h: set delay to 1 if unnusedHans Verkuil
If the audio_out_delay value is unused, then set it to 1, not 0. The value 0 is reserved, and 1 is a much safer value since it translates to a delay of (1 - 1) * 2 = 0 ms. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: drivers/media/usb/gspca/cpia1.c : fix spelling typoHerman
change 'then' into 'than' Signed-off-by: Herman <yanshuaijun@yulong.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: drivers/media/platform/Rcar_jpu.c : fix typo issuesHerman
change 'requerment' into 'requirement' change 'quantanization' into 'quantization' change 'qantization' into 'quantization' Signed-off-by: Herman <yanshuaijun@yulong.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: hantro: test the correct variable in probe()Dan Carpenter
This should be testing "vpu->clocks[0].clk" instead of "vpu->clocks". Fixes: eb4cacdfb998 ("media: hantro: add fallback handling for single irq/clk") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: drivers/media/usb/em28xx/em28xx-cards.c : fix typo issuesHerman
change 'Configuare' into 'Configure' change 'Configuared' into 'Configured' Signed-off-by: Herman <yanshuaijun@yulong.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: st-hva: Fix potential NULL pointer dereferencesEvgeny Novikov
When ctx_id >= HVA_MAX_INSTANCES in hva_hw_its_irq_thread() it tries to access fields of ctx that is NULL at that point. The patch gets rid of these accesses. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: v4l: cadence: Handle errors of clk_prepare_enable()Evgeny Novikov
Handle errors of clk_prepare_enable() in csi2rx_get_resources(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: staging: media: zoran: change asm headerCorentin Labbe
As asked by checkpatch, convert a asm/xxx header to a linux one. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: staging: media: zoran: fix kzalloc styleCorentin Labbe
Prefer kzalloc(sizeof(*prt)...) over kzalloc(sizeof(struct.../ Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-02media: staging: media: zoran: remove blank lineCorentin Labbe
Minor style fix by removing useless blank line. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 23:22:31 +0000