summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-09drm/dp_mst: Fill branch->num_portsDavid Francis
This field on drm_dp_mst_branch was never filled It is initialized to zero when the port is kzallocced. When a port is added to the list, increment num_ports, and when a port is removed from the list, decrement num_ports. v2: remember to decrement on port removal v3: don't explicitly init to 0 v4: move decrement of num_ports to unlink_port function Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/dp_mst: Add MST support to DP DPCD R/W functionsDavid Francis
Instead of having drm_dp_dpcd_read/write and drm_dp_mst_dpcd_read/write as entry points into the aux code, have drm_dp_dpcd_read/write handle both. This means that DRM drivers can make MST DPCD read/writes. v2: Fix spacing v3: Dump dpcd access on MST read/writes v4: Fix calling wrong function on DPCD write v5: delete deprecated include of drmP.h Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/dp_mst: Parse FEC capability on MST portsDavid Francis
As of DP1.4, ENUM_PATH_RESOURCES returns a bit indicating if FEC can be supported up to that point in the MST network. The bit is the first byte of the ENUM_PATH_RESOURCES ack reply, bottom-most bit (refer to section 2.11.9.4 of DP standard, v1.4) That value is needed for FEC and DSC support Store it on drm_dp_mst_port Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/dp_mst: Add PBN calculation for DSC modesDavid Francis
With DSC, bpp can be fractional in multiples of 1/16. Change drm_dp_calc_pbn_mode to reflect this, adding a new parameter bool dsc. When this parameter is true, treat the bpp parameter as having units not of bits per pixel, but 1/16 of a bit per pixel v2: Don't add separate function for this v3: In the equation divide bpp by 16 as it is expected not to leave any remainder v4: Added DSC test parameters for selftest Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/amdkfd: Improve kfd_process lookup in kfd_ioctlFelix Kuehling
Use filep->private_data to store a pointer to the kfd_process data structure. Take an extra reference for that, which gets released in the kfd_release callback. Check that the process calling kfd_ioctl is the same that opened the file descriptor. Return -EBADF if it's not, so that this error can be distinguished in user mode. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-09drm/panel: simple: Add Satoz SAT050AT40H12R2 panel supportMiquel Raynal
Add support for the Satoz SAT050AT40H12R2 panel. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200109184037.9091-2-miquel.raynal@bootlin.com
2020-01-09dt-bindings: display: simple: Add Satoz panelMiquel Raynal
Satoz is a Chinese TFT manufacturer. Website: http://www.sat-sz.com/English/index.html Add the compatible for its SAT050AT40H12R2 5.0 inch LCD panel. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200109184037.9091-1-miquel.raynal@bootlin.com
2020-01-09dt-bindings: display: Convert Allwinner display pipeline to schemasMaxime Ripard
The Allwinner SoCs have a display engine composed of several controllers assembled differently depending on the SoC, the number and type of output they have, and the additional features they provide. A number of those are supported in Linux, with the matching bindings. Now that we have the DT validation in place, let's split into separate file and convert the device tree bindings for those controllers to schemas. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200103152801.47254-1-maxime@cerno.tech
2020-01-09drm/fb-cma-helpers: Fix include issueBenjamin Gaignard
Exported functions prototypes are missing in drm_fb_cma_helper.c Include drm_fb_cma_helper to fix that issue. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20191119105753.32363-1-benjamin.gaignard@st.com
2020-01-09drm/modes: tag unused variables to avoid warningsBenjamin Gaignard
Some variables are set but never used. To avoid warning when compiling with W=1 and keep the algorithm like it is tag theses variables with _maybe_unused macro. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20191210102437.19377-1-benjamin.gaignard@st.com
2020-01-09drm/panel: Add support for BOE NV140FHM-N49 panel to panel-simpleTobias Schramm
This patch adds support for the BOE NV140FHM-N49 panel to the panel-simple driver. The panel is used by the pine64 Pinebook Pro. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200109112952.2620-2-t.schramm@manjaro.org
2020-01-09dt-bindings: display: add BOE 14" panelSam Ravnborg
Add bindings for the BOE NV140FHM-N49 14" 1920x1080 panel. The panel is used by the pine64 Pinebook Pro. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Tobias Schramm <t.schramm@manjaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200109140742.GA12940@ravnborg.org
2020-01-09drm/panel: Add driver for Sony ACX424AKP panelLinus Walleij
The Sony ACX424AKP is a command/videomode DSI panel for mobile devices. It is used on the ST-Ericsson HREF520 reference design. We support video mode by default, but it is possible to switch the panel into command mode by using the bool property "dsi-command-mode". Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200109072815.334867-1-linus.walleij@linaro.org
2020-01-09drm/udl: Make udl driver depend on CONFIG_USBThomas Zimmermann
The udl driver for DisplayLink devices depends on support for host-side USB controllers, which is enabled with CONFIG_USB. Plain USB support as given by CONFIG_USB_SUPPORT is not sufficient. This patch changes dependencies for udl to depend on CONFIG_USB, instead of CONFIG_USB_SUPPORT. Users will have to enable CONFIG_USB and select a USB host controller. With this change udl dependencies work the same way as dependencies for PCI drivers. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200106141016.9562-1-tzimmermann@suse.de
2020-01-09drm/Kconfig: add missing 'depends on DRM' for DRM_DP_CECHans Verkuil
Add a missing 'depends on DRM' for the DRM_DP_CEC config option. Without that enabling DRM_DP_CEC will force CEC_CORE to =y instead of =m if DRM=m as well. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/489bdaae-9b05-2d70-12e1-4fda7899dfc1@xs4all.nl
2020-01-09dt-bindings: panel-simple: Add compatible for Sharp LS020B1DD01DPaul Cercueil
Add a compatible string for the Sharp LS020B1DD01D 2" HQVGA TFT LCD panel, and remove the old sharp,ls020b1dd01d.txt documentation which is now obsolete. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200109003000.119516-2-paul@crapouillou.net
2020-01-09dt-bindings: panel-simple: Add compatible for GiantPlus GPM940B0Paul Cercueil
Add a compatible string for the GiantPlus GPM740B0 3" QVGA TFT LCD panel, and remove the old giantplus,gpm740b0.txt documentation which is now obsolete. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200109003000.119516-1-paul@crapouillou.net
2020-01-09drm/lima: use drm_sched_fault for error task handlingQiang Yu
drm_sched_job_timedout works with drm_sched_stop as a pair, so we'd better use the drm_sched_fault helper to make the error and timeout handling go the same path. This also fixes application hang when task error. Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Andreas Baierl <ichgeh@imkreisrum.de> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200101103831.22429-1-yuq825@gmail.com
2020-01-09Merge tag 'drm-misc-next-2020-01-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.6: UAPI Changes: - Allow overriding number of bootup penguins in fbcon using fbcon=logo-count:n. Cross-subsystem Changes: - fbdev fixes for mmp, and make it work with CONFIG_COMPILE_TEST. - Use devm_platform_ioremap_resource in fbdev drivers. - Various small fbdev fixes. Core Changes: - Support scanline alignment for dumb buffers. - Add atomic_check() hook to bridge ops, to support bus format negotiation. - Add gem_create_object() to vram helpers. Driver Changes: - Rockchip: Add support for PX30. - Use generic fbdev code and dumb helpers in hisilicon/hibmc. - Add support for Leadtek LTK500HD1829 panel, and xinpeng XPP055C272. - Clock fixes for atmel-hlcdc. - Various smaller fixes to all drivers. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8eff1e3f-ef0a-2dd9-9a14-6273b1d6f963@linux.intel.com
2020-01-09drm: of: Fix linking when CONFIG_OF is not setLaurent Pinchart
The new helper drm_of_lvds_get_dual_link_pixel_order() introduced in commit 6529007522de has a fallback stub when CONFIG_OF is not set, but the stub is declared in drm_of.h without a static inline. This causes multiple definitions of the function to be linked when the CONFIG_OF option isn't set. Fix it by making the stub static inline. Fixes: 6529007522de ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191219103703.8547-1-laurent.pinchart+renesas@ideasonboard.com
2020-01-09drm/panel: Add support for AUO B116XAK01 panelRob Clark
Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200108235356.918189-2-robdclark@gmail.com
2020-01-09dt-bindings: display: panel: Add AUO B116XAK01 panel bindingsRob Clark
Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200108235356.918189-1-robdclark@gmail.com
2020-01-08dt-bindings: Add vendor prefix for SatozMiquel Raynal
Satoz is a Chinese TFT manufacturer. Website: http://www.sat-sz.com/English/index.html Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200106151827.31511-1-miquel.raynal@bootlin.com
2020-01-08dt-bindings: one binding file for all simple panelsSam Ravnborg
There is an increasing number of new simple panels. Common for many of these simple panels are that they have one mandatory power-supply and some of them have backlight and / or an enable gpio. The binding file to describe these panels adds overhead that really do not add value. The binding are known and there is nothing gained from a dedicated binding file nor for any dedicated example. The following patch introduces a single panel-simple.yaml and converts two ampire bindings over to the new file. The conversion - if applied will have following effects: - The maintainer for the individual file will change There is no need for many different maintainers for a simple binding. We have the same situation with the panel-simple driver in the kernel. - The license will change to (GPL-2.0-only OR BSD-2-Clause) There is usually only a single line copied from the original file, a line that is often copied from a datasheet. This license change should be acceptable considered what little is copied. If the license change is not OK we can use a dedicated binding file in these cases. This is a follow-up on Rob's big patch converting a lot of panel bindings to individual files: "dt-bindings: display: Convert a bunch of panels to DT schema" https://patchwork.ozlabs.org/patch/1197683/ The objectives with one file for the relevant simple panels are: - Make it simpler to add bindings for simple panels - Keep the number of bindings file lower and thus easier to find a relevant file to copy from when adding new panels. - Keep the binding documentation for simple panels more consistent - Make it simpler to add support for new panels v3: - Whitespace fix (checkpatch) - Indent compatible (Rob h) - Indent comments to give compatible more visibility (Rob h) v2: - spelling fixes (imirkin via irc, Rob) - updated description (Rob) - list properires in alphabetical order - added power-supply to example (Rob) - updated title - reworded changelog a little Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Rob Herring <robh@kernel.org> Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: devicetree@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200102101712.5085-2-sam@ravnborg.org
2020-01-08gpu/drm: clean up white space in drm_legacy_lock_master_cleanup()Dan Carpenter
We moved this code to a different file and accidentally deleted a newline. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200108054312.yzlj5wmbdktejgob@kili.mountain
2020-01-08drm/omapdrm: use BUG_ON macro for error debugging.Wambui Karuga
Since the if statement only checks for the value of the `id` variable, it can be replaced by the more concise BUG_ON() macro for error reporting. Issue found using coccinelle. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200102095515.7106-1-wambui.karugax@gmail.com
2020-01-08drm: meson: fix address type confusionArnd Bergmann
Casting a pointer to dma_addr_t produces a warning: drivers/gpu/drm/meson/meson_rdma.c: In function 'meson_rdma_free': drivers/gpu/drm/meson/meson_rdma.c:59:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] priv->rdma.addr_phys = (dma_addr_t)NULL; In this case, it's worse because the variable name has the suffix '_phys', which often indicates a phys_addr_t rather than dma_addr_t, i.e. yet another incompatible type. Change it to use consistent naming and avoid NULL. Fixes: 63fba242c464 ("drm/meson: add RDMA module driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200107214653.1173199-1-arnd@arndb.de
2020-01-08drm/gma500: remove set but not used variables 'hist_reg'Chen Zhou
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/gma500/psb_irq.c: In function psb_irq_turn_off_dpst: drivers/gpu/drm/gma500/psb_irq.c:473:6: warning: variable hist_reg set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191227114811.14907-1-chenzhou10@huawei.com
2020-01-08drm/sun4i: drc: Make sure we enforce the clock rateMaxime Ripard
The DRC needs to run at 300MHz to be functional. This was done so far using assigned-clocks in the device tree, but that is easy to forget, and doesn't provide any other guarantee than the rate is going to be roughly the one requested at probe time. Therefore it's pretty fragile, so let's just use the exclusive clock API to enforce it. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200107165957.672435-2-maxime@cerno.tech
2020-01-08drm/sun4i: backend: Make sure we enforce the clock rateMaxime Ripard
The backend needs to run at 300MHz to be functional. This was done so far using assigned-clocks in the device tree, but that is easy to forget, and doesn't provide any other guarantee than the rate is going to be roughly the one requested at probe time. Therefore it's pretty fragile, so let's just use the exclusive clock API to enforce it. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200107165957.672435-1-maxime@cerno.tech
2020-01-08drm/exynos: dsi: Fix bridge chain handlingBoris Brezillon
Commit 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list") patched the bridge chain logic to use a double-linked list instead of a single-linked list. This change induced changes to the Exynos driver which was manually resetting the encoder->bridge element to NULL to control the enable/disable sequence of the bridge chain. During this conversion, 2 bugs were introduced: 1/ list_splice() was used to move chain elements to our own internal chain, but list_splice() does not reset the source list to an empty state, leading to unexpected bridge hook calls when drm_bridge_chain_xxx() helpers were called by the core. Replacing the list_splice() call by list_splice_init() fixes this problem. 2/ drm_bridge_chain_xxx() helpers operate on the bridge->encoder->bridge_chain list, which is now empty. When the helper uses list_for_each_entry_reverse() we end up with no operation done which is not what we want. But that's even worse when the helper uses list_for_each_entry_from(), because in that case we end up in an infinite loop searching for the list head element which is no longer encoder->bridge_chain but exynos_dsi->bridge_chain. To address that problem we stop using the bridge chain helpers and call the hooks directly. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list") Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191227144124.210294-3-boris.brezillon@collabora.com
2020-01-08drm/vc4: dsi: Fix bridge chain handlingBoris Brezillon
Commit 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list") patched the bridge chain logic to use a double-linked list instead of a single-linked list. This change induced changes to the VC4 driver which was manually resetting the encoder->bridge element to NULL to control the enable/disable sequence of the bridge chain. During this conversion, 2 bugs were introduced: 1/ list_splice() was used to move chain elements to our own internal chain, but list_splice() does not reset the source list to an empty state, leading to unexpected bridge hook calls when drm_bridge_chain_xxx() helpers were called by the core. Replacing those list_splice() calls by list_splice_init() ones fixes this problem. 2/ drm_bridge_chain_xxx() helpers operate on the bridge->encoder->bridge_chain list, which is now empty. When the helper uses list_for_each_entry_reverse() we end up with no operation done which is not what we want. But that's even worse when the helper uses list_for_each_entry_from(), because in that case we end up in an infinite loop searching for the list head element which is no longer encoder->bridge_chain but vc4_dsi->bridge_chain. To address that problem we stop using the bridge chain helpers and call the hooks directly. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Eric Anholt <eric@anholt.net> Fixes: 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list") Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20191227144124.210294-2-boris.brezillon@collabora.com
2020-01-08video: fbdev: mmp: fix platform_get_irq.cocci warningskbuild test robot
Remove dev_err() messages after platform_get_irq*() failures. Line 450 is redundant because platform_get_irq() already prints an error. Generated by: scripts/coccinelle/api/platform_get_irq.cocci Fixes: dd90e9ae55a1 ("video: fbdev: mmp: add COMPILE_TEST support") Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.21.2001042140310.6944@hadrien
2020-01-08Revert "drm/bridge: Add a drm_bridge_state object"Boris Brezillon
This reverts commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state object") which introduced a circular dependency between drm.ko and drm_kms_helper.ko. Looks like the helper/core split is not appropriate and fixing that is not simple. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-6-boris.brezillon@collabora.com
2020-01-08Revert "drm/bridge: Patch atomic hooks to take a drm_bridge_state"Boris Brezillon
This reverts commit f7619a58ef92 ("drm/bridge: Patch atomic hooks to take a drm_bridge_state"). Commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state object") introduced a circular dependency between drm.ko and drm_kms_helper.ko which uncovered a misdesign in how the whole thing was implemented. Let's revert all patches depending on the bridge_state infrastructure for now. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-5-boris.brezillon@collabora.com
2020-01-08Revert "drm/bridge: Add an ->atomic_check() hook"Boris Brezillon
This reverts commit b86d895524ab ("drm/bridge: Add an ->atomic_check() hook"). Commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state object") introduced a circular dependency between drm.ko and drm_kms_helper.ko which uncovered a misdesign in how the whole thing was implemented. Let's revert all patches depending on the bridge_state infrastructure for now. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-4-boris.brezillon@collabora.com
2020-01-08Revert "drm/bridge: Add the necessary bits to support bus format negotiation"Boris Brezillon
This reverts commit e351e4d5eaec ("drm/bridge: Add the necessary bits to support bus format negotiation"). Commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state object") introduced a circular dependency between drm.ko and drm_kms_helper.ko which uncovered a misdesign in how the whole thing was implemented. Let's revert all patches depending on the bridge_state infrastructure for now. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-3-boris.brezillon@collabora.com
2020-01-08Revert "drm/bridge: Fix a NULL pointer dereference in ↵Boris Brezillon
drm_atomic_bridge_chain_check()" This reverts commit b18398c16e17 ("drm/bridge: Fix a NULL pointer dereference in drm_atomic_bridge_chain_check()"). Commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state object") introduced a circular dependency between drm.ko and drm_kms_helper.ko which uncovered a misdesign in how the whole thing was implemented. Let's revert all patches depending on the bridge_state infrastructure for now. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-2-boris.brezillon@collabora.com
2020-01-07drm: Set crc->opened to false before setting crc source to NULL.Dingchen Zhang
to terminate the while-loop in drm_dp_aux_crc_work when drm_dp_start/stop_crc are called in the hook to set crc source. v3: set crc->opened to false without checking (Nick) v2: Move spin_lock around entire crc->opened use (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Nick Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Dingchen Zhang <dingchen.zhang@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190726173743.11641-1-dingchen.zhang@amd.com
2020-01-07drm: remove the newline for CRC source name.Dingchen Zhang
userspace may transfer a newline, and this terminating newline is replaced by a '\0' to avoid followup issues. 'len-1' is the index to replace the newline of CRC source name. v3: typo fix (Sam) v2: update patch subject, body and format. (Sam) Cc: Leo Li <sunpeng.li@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Dingchen Zhang <dingchen.zhang@amd.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190610134751.14356-1-dingchen.zhang@amd.com
2020-01-07drm: zte: Provide ddc symlink in vga connector sysfs directoryAndrzej Pietrasiewicz
Use the ddc pointer provided by the generic connector. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200102132300.24309-5-andrzej.p@collabora.com
2020-01-07drm: zte: Provide ddc symlink in hdmi connector sysfs directoryAndrzej Pietrasiewicz
Use the ddc pointer provided by the generic connector. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200102132300.24309-4-andrzej.p@collabora.com
2020-01-07drm/vc4: Provide ddc symlink in connector sysfs directoryAndrzej Pietrasiewicz
Use the ddc pointer provided by the generic connector. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200102132300.24309-3-andrzej.p@collabora.com
2020-01-07drm/tegra: Provide ddc symlink in output connector sysfs directoryAndrzej Pietrasiewicz
Use the ddc pointer provided by the generic connector. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200102132300.24309-2-andrzej.p@collabora.com
2020-01-07drm/amd/display: Reduce HDMI pixel encoding if max clock is exceededThomas Anderson
For high-res (8K) or HFR (4K120) displays, using uncompressed pixel formats like YCbCr444 would exceed the bandwidth of HDMI 2.0, so the "interesting" modes would be disabled, leaving only low-res or low framerate modes. This change lowers the pixel encoding to 4:2:2 or 4:2:0 if the max TMDS clock is exceeded. Verified that 8K30 and 4K120 are now available and working with a Samsung Q900R over an HDMI 2.0b link from a Radeon 5700. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Thomas Anderson <thomasanderson@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: add event type check before restart the authenticationXiaodong Yan
[Why] Some combined docks will always trigger CP_IRQ but there's nothing the driver needs to take care of, but the CP_IRQ breaks the original hdcp state and triggers the driver to restart the authentication. [How] Add the event type check before restart the authentication or resend the stream management Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: Add delay after h' watchdog timeout eventMichael Strauss
[WHY] Some monitors trigger HDCP2.x timeout after reinitializing (e.g. toggling HDR) by taking longer than expected to return h' (h prime) Previously the 200ms watchdog timer retry count would hit MAX_NUM_OF_ATTEMPTS (4), causing fallback to HDCP1.x [HOW] Adding a 1s delay after an h' watchdog timeout provides enough time for affected monitors to return h' in time without hitting MAX_NUM_OF_ATTEMPTS Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: rx_validation failed resume from sleepJing Zhou
[why] Most DP/HDMI monitors need more time to response rx_validation request. [how] Add generic 1000ms delay. Signed-off-by: Jing Zhou <Jing.Zhou@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: Return correct Error code for validate h_primeBhawanpreet Lakha
[Why] We are returning incorrect error code for validate h prime [How] Return the right Error code Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: Fix hdcp1 create sessionBhawanpreet Lakha
[Why] PSP needs session ID to destroy a session, In the case where we fail create session we don't have a session ID [How] Set the session ID before returning Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 15:22:01 +0000