summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-23MIPS: microMIPS: Remove unsupported compiler flag.Steven J. Hill
Remove usage of -mno-jals compiler flag when building a pure microMIPS kernel. The -mno-jals flag only ever existed within Mentor toolchains. Dropping this flag allows all FSF toolchains to work. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6200/
2014-01-23MIPS: OCTEON: Supply OCTEON+ USB nodes in internal device trees.David Daney
This will be needed by the next patch to use said nodes for probing via the device tree. Signed-off-by: David Daney <david.daney@cavium.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6185/
2014-01-23MIPS: Malta: use generic 8250 early consolePaul Burton
This patch switches Malta from using the MIPS implementation of early printk with Malta's prom_putchar to using the generic 8250_early implementation. This offers a couple of advantages: - We duplicate less generic code. - The UART can be initialised rather than being reliant upon inheriting a valid setup from the bootloader. The Malta console_config function is extended to initialise the early console if no earlycon= kernel parameter is provided, inheriting the modetty0 bootloader environment if present and falling back to a default 38400n8r setup if not. This matches the behaviour used for the regular console= parameter. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6183/
2014-01-23MIPS: Malta: mux & enable SERIRQ interruptPaul Burton
This patch causes the kernel to mux the SERIRQ interrupt to the SERIRQ pin of the PIIX4 and to enable that interrupt. The kernel depends upon the interrupt when using the SuperIO UARTs (ttyS0 & ttyS1) but previously would not configure it, instead relying upon the bootloader having done so. If that is not the case then the typical result is that the system appears to hang once it reaches userland as no output is displayed on the UART. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6182/
2014-01-23MIPS: Malta: initialise the RTC at bootPaul Burton
The RTC is used on Malta to estimate the clock frequency of the CPU & optionally the GIC. However the kernel previously did not initialise the RTC, instead relying upon the bootloader having done so. In order to minimise dependencies which the kernel has upon the bootloader this patch causes the kernel to initialise the RTC itself prior to making use of it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6184/
2014-01-23MIPS: sead3: remove unused cpu_khz variablePaul Burton
This variable seems to have been copied from Malta when SEAD3 support was introduced, but is likewise unused. Remove it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6172/
2014-01-23MIPS: Malta: remove unused cpu_khz variablePaul Burton
This variable was introduced by commit 96348c8f (of Ralf's historic Linux/MIPS repository) "Remaining fixes for MIPS's eval boards." but I don't see any use of it either then or now. Remove it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6171/
2014-01-23MIPS: cavium-octeon: export symbols needed by octeon-ethernetAaro Koskinen
Export symbols needed by the octeon-ethernet driver. The patch fixes a build failure with CONFIG_OCTEON_ETHERNET=m. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6166/
2014-01-23MIPS: Fix build error seen in some configurationsGuenter Roeck
The following build error is seen if CONFIG_32BIT is undefined, CONFIG_64BIT is defined, and CONFIG_MIPS32_O32 is undefined. asm/syscall.h: In function 'mips_get_syscall_arg': arch/mips/include/asm/syscall.h:32:16: error: unused variable 'usp' [-Werror=unused-variable] cc1: all warnings being treated as errors Fixes: c0ff3c53d4f9 ('MIPS: Enable HAVE_ARCH_TRACEHOOK') Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6160/
2014-01-23MIPS: cavium-octeon: fix early boot hang on EBH5600 boardAaro Koskinen
The boot hangs early on EBH5600 board when octeon_fdt_pip_iface() is trying enumerate a non-existant interface. The actual hang happens in cvmx_helper_interface_get_mode(): mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); when interface == 4. We can avoid this situation by first checking that the interface exists in the DTB. Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6101/
2014-01-23MIPS: cavium-octeon: fix out-of-bounds array accessAaro Koskinen
When booting with in-kernel DTBs, the pruning code will enumerate interfaces 0-4. However, there is memory reserved only for 4 so some other data will get overwritten by cvmx_helper_interface_enumerate(). Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6102/
2014-01-23MIPS: JZ4740: reuse UART0 address macro for vmlinuz debug portAntony Pavlov
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5927/
2014-01-22MIPS: improve checks for noncoherent DMAFelix Fietkau
Only one MIPS development board actually supports enabling/disabling DMA coherency at runtime, so it's not a good idea to push the overhead of checking that configuration setting onto every other supported target as well. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5912/
2014-01-22MIPS: APRP: Code formatting clean-ups.Steven J. Hill
Clean-up code according to the 'checkpatch.pl' script. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Qais Yousef <Qais.Yousef@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/6097/ Reviewed-by: John Crispin <blogic@openwrt.org>
2014-01-22MIPS: APRP: Add support for Malta CMP platform.Deng-Cheng Zhu
Malta with multi-core CM platforms can now use APRP functionality. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Qais Yousef <Qais.Yousef@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6096/
2014-01-22MIPS: APRP: Add RTLX API support for CMP platforms.Deng-Cheng Zhu
This patch adds RTLX API support for platforms having a CMP. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Qais Yousef <Qais.Yousef@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/6095/ Reviewed-by: John Crispin <blogic@openwrt.org>
2014-01-22MIPS: APRP: Split RTLX support into separate files.Deng-Cheng Zhu
Split the RTLX functionality in preparation for adding support for CMP platforms. Common functions remain in the original file and a new file contains code specific to platforms that do not have a CMP. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Qais Yousef <Qais.Yousef@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/6093/ Reviewed-by: John Crispin <blogic@openwrt.org>
2014-01-22MIPS: APRP: Add VPE loader support for CMP platforms.Deng-Cheng Zhu
This patch adds VPE loader support for platforms having a CMP. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Qais Yousef <Qais.Yousef@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6092/
2014-01-22MIPS: APRP: Split VPE loader into separate files.Deng-Cheng Zhu
Split the VPE functionality in preparation for adding support for CMP platforms. Common functions remain in the original file and a new file contains code specific to platforms that do not have a CMP present. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Reviewed-by: Qais Yousef <Qais.Yousef@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6094/
2014-01-22MIPS: Clean up MIPS MT and CMP configuration options.Steven J. Hill
This patch accomplishes the following: * Clean up wording on all MIPS MT configuration menu items. * Simplify and neaten up options selected by MIPS_MT_SMP. * Make MIPS_MT_SMTC support as deprecated. * Make MIPS_CMP support to depend on MIPS_MT_SMP also. * Remove redundant options selected by MIPS_CMP. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6019/
2014-01-22MIPS: kernel: cpu-probe: Add support for probing interAptiv coresLeonid Yegoshin
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6152/
2014-01-22MIPS: Add support for interAptiv coresLeonid Yegoshin
The interAptiv is a power-efficient multi-core microprocessor for use in system-on-chip (SoC) applications. The interAptiv combines a multi-threading pipeline with a coherence manager to deliver improved computational throughput and power efficiency. The interAptiv can contain one to four MIPS32R3 interAptiv cores, system level coherence manager with L2 cache, optional coherent I/O port, and optional floating point unit. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6163/
2014-01-22MIPS: Add processor identifiers for the interAptiv processorsLeonid Yegoshin
Add processor identifiers for UP and MT interAptiv processors. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6151/
2014-01-22MIPS: Add debugfs file to print the segmentation control registersSteven J. Hill
Add a new mips/segments debugfs file to print the 6 segmentation control registers for supported cores. A sample from a proAptiv core is given below: Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6137/ Segment Virtual Size Access Mode Physical Caching EU ------- ------- ---- ----------- -------- ------- -- 0 e0000000 512M MK UND U 0 1 c0000000 512M MSK UND U 0 2 a0000000 512M UK 000 2 0 3 80000000 512M UK 000 3 0 4 40000000 1G MUSK UND U 1 5 00000000 1G MUSK UND U 1 Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-01-22MIPS: Add support for FTLBsLeonid Yegoshin
The Fixed Page Size TLB (FTLB) is a set-associative dual entry TLB. Its purpose is to reduce the number of TLB misses by increasing the effective TLB size and keep the implementation complexity to minimum levels. A supported core can have both VTLB and FTLB. Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6139/
2014-01-22MIPS: mm: Use the TLBINVF instruction to flush the VTLBLeonid Yegoshin
The TLBINVF instruction can be used to flush the entire VTLB. This eliminates the need for the TLBWI loop and improves performance. Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6138/
2014-01-22MIPS: Add function for flushing the TLB using the TLBINV instructionLeonid Yegoshin
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6136/
2014-01-22MIPS: kernel: cpu-probe: Add support for probing proAptiv coresLeonid Yegoshin
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6135/
2014-01-22MIPS: Add support for the proAptiv coresLeonid Yegoshin
The proAptiv Multiprocessing System is a power efficient multi-core microprocessor for use in system-on-chip (SoC) applications. The proAptiv Multiprocessing System combines a deep pipeline with multi-issue out of order execution for improved computational throughput. The proAptiv Multiprocessing System can contain one to six MIPS32r3 proAptiv cores, system level coherence manager with L2 cache, optional coherent I/O port, and optional floating point unit. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6134/
2014-01-22MIPS: Add processor identifiers for the proAptiv processorsLeonid Yegoshin
Add processor identifiers for single core and multi-core proAptiv processors. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6133/
2014-01-22MIPS: tlb: Set the EHINV bit for TLBINVF cores when invalidating the TLBLeonid Yegoshin
For MIPS32R3 supported cores, the EHINV bit needs to be set when invalidating the TLB. This is necessary because the legacy software method of representing an invalid TLB entry using an unmapped address value is not guaranteed to work. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6132/
2014-01-22MIPS: features: Add initial support for Segmentation Control registersSteven J. Hill
MIPS32R3 introduced a new set of Segmentation Control registers which increase the flexibility of the segmented-based memory scheme. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6131/
2014-01-22MIPS: features: Add initial support for TLBINVF capable coresLeonid Yegoshin
New Aptiv cores support the TLBINVF instruction for flushing the VTLB. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6130/
2014-01-22MIPS: mm: Move UNIQUE_ENTRYHI macro to a header fileMarkos Chandras
The UNIQUE_ENTRYHI definition was duplicated whenever there was the need to flush the TLB entries. We move this common definition to a header file. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6129/
2014-01-22MIPS: Add missing bits for Config registersLeonid Yegoshin
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6128/
2014-01-22MIPS: MT: proc: Add support for printing VPE and TC idsMarkos Chandras
Add support for including VPE and TC ids in /proc/cpuinfo output as appropriate when MT/SMTC is enabled. Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6065/
2014-01-22MIPS: Malta: Remove ttyS2 serial for CMP platformsLeonid Yegoshin
Commit 225ae5fd9a320e22841410049c3bdb6cf14a5841 "MIPS: Malta: Fix interupt number of CBUS UART" fixed the IRQ number for the ttyS2 CBUS UART. However, this now conflicts with the GIC IPI1 interrupt in CMP platforms. The Malta interrupt code arbitrarily binds IPIs to INT2 and INT3 and since ttyS2 uses the INT2 IRQ line, closing the device disables the INT2 interrupt and this effectively disables the IPI1 interrupt as well. This patch is mainly a workaround until the Malta code is fixed properly. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6045/
2014-01-22MIPS: Add printing of ES bit for Imgtec cores when cache error occurs.Leonid Yegoshin
The cacheer register is always implemented in the same way in the MIPS32r2 Imgtec cores so print the ES bit when an cache error occurs. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6041/
2014-01-22MIPS: GIC: Send IPIs using the GICSteven J. Hill
If GIC is present, then use it to send IPIs between the cores. Using GIC for IPIs is simpler and is usable for multicore systems compared to the existing way of doing IPIs where all VPEs had to be disabled for another VPE to access the Cause register in one of the TCs and enable all the VPEs back. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6040/
2014-01-22MIPS: MT: Mark existing TCs as presentMarkos Chandras
According to Documentation/cpu-hotplug.txt, the cpu_present_mask should contain all the CPUs which are present in the system. Therefore, all the TCs currently present in the system should be marked as 'present' even if they will never be brought online. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6039/
2014-01-22MIPS: mm: c-r4k: Panic if IL or DL fields have a reserved valueMarkos Chandras
According to MIPS32 and MIPS64 PRA documents, a value of 7 in IL and DL fields is marked as "Reserved" so panic if the core uses this value in the config1 register. Also simplify the code a little bit. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5861/
2014-01-22MIPS: kernel: smp-cmp: MIPS MT code needs CONFIG_MIPS_MTMarkos Chandras
The mips_mt_* symbols are only built and exported if CONFIG_MIPS_MT is enabled. Fixes the following build problem when CONFIG_SMP is enabled but CONFIG_MIPS_MT is not. arch/mips/built-in.o: In function `cmp_prepare_cpus': arch/mips/kernel/smp-cmp.c:197: undefined reference to `mips_mt_set_cpuoptions' Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5860/
2014-01-22MIPS: BCM47XX: Fix some very confused types and data corruptionIlia Mirkin
Fix nvram_read_alpha2 copying too many bytes over the ssb_sprom structure. Also fix the arguments of the read_macaddr, although the code was technically not wrong before due to an extra dereference. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6211/
2014-01-22MIPS: BCM47XX: add vectored interrupt supportHauke Mehrtens
This adds support for vectored interrupt which is supported by the SoC using a MIPS 74K CPU like the BCM4716 and BCM4706. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6290/
2014-01-22MIPS: BCM47XX: add cpu-feature-overrides.hHauke Mehrtens
The BCM47XX SoC code missed a cpu-feature-overrides.h header file, this patch adds it. This code supports a long line of SoCs with different features so for some features we still have to rely on the runtime detection. This was crated by checking the features of a BCM4712, BCM4704, BCM5354, BCM4716 and BCM4706 SoC and then tested on these SoCs. There are some SoCs missing but I hope they do not have any more or less features. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6289/
2014-01-22MIPS: BCM47XX: move constant array from stackHauke Mehrtens
Move the possible nvram sizes from the stack into the data segment Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6044/
2014-01-22MIPS: BCM47XX: add asmlinkage to plat_irq_dispatch()Hauke Mehrtens
plat_irq_dispatch() is called from asm code, add asmlinkage. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6043/
2014-01-22MIPS: BCM47XX: update defconfigHauke Mehrtens
The defconfig for bcm47xx contained lots of driver which are not special for these SoCs and missed on the other side some some drivers for parts essential for these SoC and only found on here. The flash, usb and some Ethernet driver were missing. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5930/
2014-01-22MIPS: BCM47XX: add EARLY_PRINTK_8250 supportHauke Mehrtens
The BCM47xx SoCs have a 8250 serial compatible console at address 0x18000300 and an other at 0x18000400. On most devices 0x18000300 is wired to some pins on the board, we should use that. This is the smae for the AI (bcma) and the SB (ssb) bus, this is some offset on the chip common core. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5889/
2014-01-22MIPS: BCM47XX: Remove CFE supportHauke Mehrtens
bcm47xx only uses the CFE code for early print to a console, but that is also possible with a early print serial 8250 driver. The CFE api init causes hangs somewhere in prom_init_cfe() on some devices like the Buffalo WHR-HP-G54 and the Asus WL-520GU. This was reported in https://dev.openwrt.org/ticket/4061 and https://forum.openwrt.org/viewtopic.php?id=17063 This will remove all the CFE handling code from bcm47xx. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5888/
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-24 18:34:21 +0000