summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-06-12fs/splice.c: remove unneeded exportsAl Viro
ocfs2 was using a bunch of splice.c guts... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-12ocfs2: switch to iter_file_splice_write()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-12->splice_write() via ->write_iter()Al Viro
iter_file_splice_write() - a ->splice_write() instance that gathers the pipe buffers, builds a bio_vec-based iov_iter covering those and feeds it to ->write_iter(). A bunch of simple cases coverted to that... [AV: fixed the braino spotted by Cyrill] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-11Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "Main excitement is a virtio_scsi fix for alloc holding spinlock on the abort path, which I refuse to CC stable since (1) I discovered it myself, and (2) it's been there forever with no reports" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_scsi: don't call virtqueue_add_sgs(... GFP_NOIO) holding spinlock. virtio-rng: fixes for device registration/unregistration virtio-rng: fix boot with virtio-rng device virtio-rng: support multiple virtio-rng devices virtio_ccw: introduce device_lost in virtio_ccw_device virtio: virtio_break_device() to mark all virtqueues broken.
2014-06-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull vhost infrastructure updates from Michael S. Tsirkin: "This reworks vhost core dropping unnecessary RCU uses in favor of VQ mutexes which are used on fast path anyway. This fixes worst-case latency for users which change the memory mappings a lot. Memory allocation for vhost-net now supports fallback on vmalloc (same as for vhost-scsi) this makes it possible to create the device on systems where memory is very fragmented, with slightly lower performance" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: move memory pointer to VQs vhost: move acked_features to VQs vhost: replace rcu with mutex vhost-net: extend device allocation to vmalloc
2014-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
Pull arch/tile changes from Chris Metcalf: "These mostly just address smaller issues reported to me" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch: tile: kernel: unaligned.c: Cleaning up uninitialized variables drivers/tty/hvc/hvc_tile.c: use PTR_ERR_OR_ZERO replace strict_strto* call with kstrto* tile: Update comments for generic idle conversion tile: cleanup the comment in init_pgprot tile: use BOOTMEM_DEFAULT instead of magic number 0 for reserve_bootmem flags
2014-06-12powerpc/book3s: Fix some ABIv2 issues in machine check codeAnton Blanchard
Commit 2749a2f26a7c (powerpc/book3s: Fix machine check handling for unhandled errors) introduced a few ABIv2 issues. We can maintain ABIv1 and ABIv2 compatibility by branching to the function rather than the dot symbol. Fixes: 2749a2f26a7c ("powerpc/book3s: Fix machine check handling for unhandled errors") Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11Merge tag 'modules-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Most of this is cleaning up various driver sysfs permissions so we can re-add the perm check (we unified the module param and sysfs checks, but the module ones were stronger so we weakened them temporarily). Param parsing gets documented, and also "--" now forces args to be handed to init (and ignored by the kernel). Module NX/RO protections get tightened: we now set them before calling parse_args()" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: set nx before marking module MODULE_STATE_COMING. samples/kobject/: avoid world-writable sysfs files. drivers/hid/hid-picolcd_fb: avoid world-writable sysfs files. drivers/staging/speakup/: avoid world-writable sysfs files. drivers/regulator/virtual: avoid world-writable sysfs files. drivers/scsi/pm8001/pm8001_ctl.c: avoid world-writable sysfs files. drivers/hid/hid-lg4ff.c: avoid world-writable sysfs files. drivers/video/fbdev/sm501fb.c: avoid world-writable sysfs files. drivers/mtd/devices/docg3.c: avoid world-writable sysfs files. speakup: fix incorrect perms on speakup_acntsa.c cpumask.h: silence warning with -Wsign-compare Documentation: Update kernel-parameters.tx param: hand arguments after -- straight to init modpost: Fix resource leak in read_dump()
2014-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/core/rtnetlink.c net/core/skbuff.c Both conflicts were very simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net/core: Add VF link state control policyDoug Ledford
Commit 1d8faf48c7 (net/core: Add VF link state control) added VF link state control to the netlink VF nested structure, but failed to add a proper entry for the new structure into the VF policy table. Add the missing entry so the table and the actual data copied into the netlink nested struct are in sync. Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net/fsl: xgmac_mdio is dependent on OF_MDIOAndy Fleming
Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net/fsl: Make xgmac_mdio read error message usefulShruti Kanetkar
Print the device address, the register number and the PHY ID for which the MDIO read operation failed Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net_sched: drr: warn when qdisc is not work conservingFlorian Westphal
The DRR scheduler requires that items on the active list are work conserving, i.e. do not hold on to skbs for throttling purposes, etc. Attaching e.g. tbf renders DRR useless because all other classes on the active list are delayed as well. So, warn users that this configuration won't work as expected; we already do this in couple of other qdiscs, see e.g. commit b00355db3f88d96810a60011a30cfb2c3469409d ('pkt_sched: sch_hfsc: sch_htb: Add non-work-conserving warning handler') The 'const' change is needed to avoid compiler warning ("discards 'const' qualifier from pointer target type"). tested with: drr_hier() { parent=$1 classes=$2 for i in $(seq 1 $classes); do classid=$parent$(printf %x $i) tc class add dev eth0 parent $parent classid $classid drr tc qdisc add dev eth0 parent $classid tbf rate 64kbit burst 256kbit limit 64kbit done } tc qdisc add dev eth0 root handle 1: drr drr_hier 1: 32 tc filter add dev eth0 protocol all pref 1 parent 1: handle 1 flow hash keys dst perturb 1 divisor 32 Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11Merge branch 'inet_csums'David S. Miller
Tom Herbert says: ==================== net: Checksum offload changes - Part IV I am working on overhauling RX checksum offload. Goals of this effort are: - Specify what exactly it means when driver returns CHECKSUM_UNNECESSARY - Preserve CHECKSUM_COMPLETE through encapsulation layers - Don't do skb_checksum more than once per packet - Unify GRO and non-GRO csum verification as much as possible - Unify the checksum functions (checksum_init) - Simply code What is in this fourth patch set: - Preserve CHECKSUM_COMPLETE instead of changing it to CHECKSUM_UNNECESSARY. This allows correct reuse in validating multiple csums in a packet. - When SW needs to compute the packet checksum, save it as CHECKSUM_COMPLETE. Also mark that checksum was compute by SW. - Add skb_gro_postpull_rcsum to udp and vxlan to make GRO work with CHECKSUM_COMPLETE. v2: Removed patch setting skb_encapsulation when validating checksum in tcp_gro_receive Please review carefully and test if possible, mucking with basic checksum functions is always a little precarious :-) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: Add skb_gro_postpull_rcsum to udp and vxlanTom Herbert
Need to gro_postpull_rcsum for GRO to work with checksum complete. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: Save software checksum completeTom Herbert
In skb_checksum complete, if we need to compute the checksum for the packet (via skb_checksum) save the result as CHECKSUM_COMPLETE. Subsequent checksum verification can use this. Also, added csum_complete_sw flag to distinguish between software and hardware generated checksum complete, we should always be able to trust the software computation. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: Preserve CHECKSUM_COMPLETE at validationTom Herbert
Currently when the first checksum in a packet is validated using CHECKSUM_COMPLETE, ip_summed is overwritten to be CHECKSUM_UNNECESSARY so that any subsequent checksums in the packet are not correctly validated. This patch adds csum_valid flag in sk_buff and uses that to indicate validated checksum instead of setting CHECKSUM_UNNECESSARY. The bit is set accordingly in the skb_checksum_validate_* functions. The flag is checked in skb_checksum_complete, so that validation is communicated between checksum_init and checksum_complete sequence in TCP and UDP. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11Merge branch 'qlcnic-next'David S. Miller
Shahed Shaikh says: ==================== This series contains an enhancement in the area of firmware minidump collection and optimization of ring count validation function. Please apply this series to net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11qlcnic: Update version to 5.3.60Shahed Shaikh
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11qlcnic: Optimize ring count validationsShahed Shaikh
- Check interrupt mode at the start of qlcnic_set_channels(). - Do not validate ring count if they are not going to change. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11qlcnic: Pre-allocate DMA buffer used for minidump collectionShahed Shaikh
Pre-allocate the physically contiguous DMA buffer used for minidump collection at driver load time, rather than at run time, to minimize allocation failures. Driver will allocate the buffer at load time if PEX DMA support capability is indicated by the adapter. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11ip_vti: fix sparse warnings for VTI_ISVTIDmitry Popov
This patch fixes the following sparse warnings: net/ipv4/ip_tunnel.c:245:53: warning: restricted __be16 degrades to integer net/ipv4/ip_vti.c:321:19: warning: incorrect type in assignment (different base types) net/ipv4/ip_vti.c:321:19: expected restricted __be16 [addressable] [assigned] [usertype] i_flags net/ipv4/ip_vti.c:321:19: got int net/ipv4/ip_vti.c:447:24: warning: incorrect type in assignment (different base types) net/ipv4/ip_vti.c:447:24: expected restricted __be16 [usertype] i_flags net/ipv4/ip_vti.c:447:24: got int Since VTI_ISVTI is always used with ip_tunnel_parm->i_flags (which is __be16), we can __force cast VTI_ISVTI to __be16 in header file. Signed-off-by: Dmitry Popov <ixaphire@qrator.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11drivers: net: davinci_cpdma: double free on errorDan Carpenter
We recently change the kzalloc() to devm_kzalloc() so freeing "ctlr" here could lead to a double free. Fixes: e194312854ed ('drivers: net: davinci_cpdma: Convert kzalloc() to devm_kzalloc().') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11amd-xgbe: unwind on error in xgbe_mdio_register()Dan Carpenter
There is a typo here so we return directly instead of unwinding. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11mrf24j40: add device managed APIsVarka Bhadram
adds the device managed APIs so that no need worry about freeing the resources. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11ceph: remove bogus externstephen hemminger
Sparse complained about this bogus extern on definition of a function. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: filter: document internal instruction encodingAlexei Starovoitov
This patch adds a description of eBPFs instruction encoding in order to bring the documentation in line with the implementation. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: filter: mention eBPF terminology as wellAlexei Starovoitov
Since the term eBPF is used anyway on mailing list discussions, lets also document that in the main BPF documentation file and replace a couple of occurrences with eBPF terminology to be more clear. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11ipv4: fix a race in ip4_datagram_release_cb()Eric Dumazet
Alexey gave a AddressSanitizer[1] report that finally gave a good hint at where was the origin of various problems already reported by Dormando in the past [2] Problem comes from the fact that UDP can have a lockless TX path, and concurrent threads can manipulate sk_dst_cache, while another thread, is holding socket lock and calls __sk_dst_set() in ip4_datagram_release_cb() (this was added in linux-3.8) It seems that all we need to do is to use sk_dst_check() and sk_dst_set() so that all the writers hold same spinlock (sk->sk_dst_lock) to prevent corruptions. TCP stack do not need this protection, as all sk_dst_cache writers hold the socket lock. [1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel AddressSanitizer: heap-use-after-free in ipv4_dst_check Read of size 2 by thread T15453: [<ffffffff817daa3a>] ipv4_dst_check+0x1a/0x90 ./net/ipv4/route.c:1116 [<ffffffff8175b789>] __sk_dst_check+0x89/0xe0 ./net/core/sock.c:531 [<ffffffff81830a36>] ip4_datagram_release_cb+0x46/0x390 ??:0 [<ffffffff8175eaea>] release_sock+0x17a/0x230 ./net/core/sock.c:2413 [<ffffffff81830882>] ip4_datagram_connect+0x462/0x5d0 ??:0 [<ffffffff81846d06>] inet_dgram_connect+0x76/0xd0 ./net/ipv4/af_inet.c:534 [<ffffffff817580ac>] SYSC_connect+0x15c/0x1c0 ./net/socket.c:1701 [<ffffffff817596ce>] SyS_connect+0xe/0x10 ./net/socket.c:1682 [<ffffffff818b0a29>] system_call_fastpath+0x16/0x1b ./arch/x86/kernel/entry_64.S:629 Freed by thread T15455: [<ffffffff8178d9b8>] dst_destroy+0xa8/0x160 ./net/core/dst.c:251 [<ffffffff8178de25>] dst_release+0x45/0x80 ./net/core/dst.c:280 [<ffffffff818304c1>] ip4_datagram_connect+0xa1/0x5d0 ??:0 [<ffffffff81846d06>] inet_dgram_connect+0x76/0xd0 ./net/ipv4/af_inet.c:534 [<ffffffff817580ac>] SYSC_connect+0x15c/0x1c0 ./net/socket.c:1701 [<ffffffff817596ce>] SyS_connect+0xe/0x10 ./net/socket.c:1682 [<ffffffff818b0a29>] system_call_fastpath+0x16/0x1b ./arch/x86/kernel/entry_64.S:629 Allocated by thread T15453: [<ffffffff8178d291>] dst_alloc+0x81/0x2b0 ./net/core/dst.c:171 [<ffffffff817db3b7>] rt_dst_alloc+0x47/0x50 ./net/ipv4/route.c:1406 [< inlined >] __ip_route_output_key+0x3e8/0xf70 __mkroute_output ./net/ipv4/route.c:1939 [<ffffffff817dde08>] __ip_route_output_key+0x3e8/0xf70 ./net/ipv4/route.c:2161 [<ffffffff817deb34>] ip_route_output_flow+0x14/0x30 ./net/ipv4/route.c:2249 [<ffffffff81830737>] ip4_datagram_connect+0x317/0x5d0 ??:0 [<ffffffff81846d06>] inet_dgram_connect+0x76/0xd0 ./net/ipv4/af_inet.c:534 [<ffffffff817580ac>] SYSC_connect+0x15c/0x1c0 ./net/socket.c:1701 [<ffffffff817596ce>] SyS_connect+0xe/0x10 ./net/socket.c:1682 [<ffffffff818b0a29>] system_call_fastpath+0x16/0x1b ./arch/x86/kernel/entry_64.S:629 [2] <4>[196727.311203] general protection fault: 0000 [#1] SMP <4>[196727.311224] Modules linked in: xt_TEE xt_dscp xt_DSCP macvlan bridge coretemp crc32_pclmul ghash_clmulni_intel gpio_ich microcode ipmi_watchdog ipmi_devintf sb_edac edac_core lpc_ich mfd_core tpm_tis tpm tpm_bios ipmi_si ipmi_msghandler isci igb libsas i2c_algo_bit ixgbe ptp pps_core mdio <4>[196727.311333] CPU: 17 PID: 0 Comm: swapper/17 Not tainted 3.10.26 #1 <4>[196727.311344] Hardware name: Supermicro X9DRi-LN4+/X9DR3-LN4+/X9DRi-LN4+/X9DR3-LN4+, BIOS 3.0 07/05/2013 <4>[196727.311364] task: ffff885e6f069700 ti: ffff885e6f072000 task.ti: ffff885e6f072000 <4>[196727.311377] RIP: 0010:[<ffffffff815f8c7f>] [<ffffffff815f8c7f>] ipv4_dst_destroy+0x4f/0x80 <4>[196727.311399] RSP: 0018:ffff885effd23a70 EFLAGS: 00010282 <4>[196727.311409] RAX: dead000000200200 RBX: ffff8854c398ecc0 RCX: 0000000000000040 <4>[196727.311423] RDX: dead000000100100 RSI: dead000000100100 RDI: dead000000200200 <4>[196727.311437] RBP: ffff885effd23a80 R08: ffffffff815fd9e0 R09: ffff885d5a590800 <4>[196727.311451] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 <4>[196727.311464] R13: ffffffff81c8c280 R14: 0000000000000000 R15: ffff880e85ee16ce <4>[196727.311510] FS: 0000000000000000(0000) GS:ffff885effd20000(0000) knlGS:0000000000000000 <4>[196727.311554] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[196727.311581] CR2: 00007a46751eb000 CR3: 0000005e65688000 CR4: 00000000000407e0 <4>[196727.311625] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>[196727.311669] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>[196727.311713] Stack: <4>[196727.311733] ffff8854c398ecc0 ffff8854c398ecc0 ffff885effd23ab0 ffffffff815b7f42 <4>[196727.311784] ffff88be6595bc00 ffff8854c398ecc0 0000000000000000 ffff8854c398ecc0 <4>[196727.311834] ffff885effd23ad0 ffffffff815b86c6 ffff885d5a590800 ffff8816827821c0 <4>[196727.311885] Call Trace: <4>[196727.311907] <IRQ> <4>[196727.311912] [<ffffffff815b7f42>] dst_destroy+0x32/0xe0 <4>[196727.311959] [<ffffffff815b86c6>] dst_release+0x56/0x80 <4>[196727.311986] [<ffffffff81620bd5>] tcp_v4_do_rcv+0x2a5/0x4a0 <4>[196727.312013] [<ffffffff81622b5a>] tcp_v4_rcv+0x7da/0x820 <4>[196727.312041] [<ffffffff815fd9e0>] ? ip_rcv_finish+0x360/0x360 <4>[196727.312070] [<ffffffff815de02d>] ? nf_hook_slow+0x7d/0x150 <4>[196727.312097] [<ffffffff815fd9e0>] ? ip_rcv_finish+0x360/0x360 <4>[196727.312125] [<ffffffff815fda92>] ip_local_deliver_finish+0xb2/0x230 <4>[196727.312154] [<ffffffff815fdd9a>] ip_local_deliver+0x4a/0x90 <4>[196727.312183] [<ffffffff815fd799>] ip_rcv_finish+0x119/0x360 <4>[196727.312212] [<ffffffff815fe00b>] ip_rcv+0x22b/0x340 <4>[196727.312242] [<ffffffffa0339680>] ? macvlan_broadcast+0x160/0x160 [macvlan] <4>[196727.312275] [<ffffffff815b0c62>] __netif_receive_skb_core+0x512/0x640 <4>[196727.312308] [<ffffffff811427fb>] ? kmem_cache_alloc+0x13b/0x150 <4>[196727.312338] [<ffffffff815b0db1>] __netif_receive_skb+0x21/0x70 <4>[196727.312368] [<ffffffff815b0fa1>] netif_receive_skb+0x31/0xa0 <4>[196727.312397] [<ffffffff815b1ae8>] napi_gro_receive+0xe8/0x140 <4>[196727.312433] [<ffffffffa00274f1>] ixgbe_poll+0x551/0x11f0 [ixgbe] <4>[196727.312463] [<ffffffff815fe00b>] ? ip_rcv+0x22b/0x340 <4>[196727.312491] [<ffffffff815b1691>] net_rx_action+0x111/0x210 <4>[196727.312521] [<ffffffff815b0db1>] ? __netif_receive_skb+0x21/0x70 <4>[196727.312552] [<ffffffff810519d0>] __do_softirq+0xd0/0x270 <4>[196727.312583] [<ffffffff816cef3c>] call_softirq+0x1c/0x30 <4>[196727.312613] [<ffffffff81004205>] do_softirq+0x55/0x90 <4>[196727.312640] [<ffffffff81051c85>] irq_exit+0x55/0x60 <4>[196727.312668] [<ffffffff816cf5c3>] do_IRQ+0x63/0xe0 <4>[196727.312696] [<ffffffff816c5aaa>] common_interrupt+0x6a/0x6a <4>[196727.312722] <EOI> <1>[196727.313071] RIP [<ffffffff815f8c7f>] ipv4_dst_destroy+0x4f/0x80 <4>[196727.313100] RSP <ffff885effd23a70> <4>[196727.313377] ---[ end trace 64b3f14fae0f2e29 ]--- <0>[196727.380908] Kernel panic - not syncing: Fatal exception in interrupt Reported-by: Alexey Preobrazhensky <preobr@google.com> Reported-by: dormando <dormando@rydia.ne> Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 8141ed9fcedb2 ("ipv4: Add a socket release callback for datagram sockets") Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: filter: add test_bpf module under MAINTAINERS' networking sectionDaniel Borkmann
Add lib/test_bpf.c entry to maintainers file under networking. All changes were posted via netdev for review, so make sure other people Cc it as well when they call get_maintainer.pl. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: add __pskb_copy_fclone and pskb_copy_for_cloneOctavian Purdila
There are several instances where a pskb_copy or __pskb_copy is immediately followed by an skb_clone. Add a couple of new functions to allow the copy skb to be allocated from the fclone cache and thus speed up subsequent skb_clone calls. Cc: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <antonio@meshcoding.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Arvid Brodin <arvid.brodin@alten.se> Cc: Patrick McHardy <kaber@trash.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Reviewed-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11sfc: PIO:Restrict to 64bit arch and use 64-bit writes.Jon Cooper
Fixes:ee45fd92c739 ("sfc: Use TX PIO for sufficiently small packets") The linux net driver uses memcpy_toio() in order to copy into the PIO buffers. Even on a 64bit machine this causes 32bit accesses to a write- combined memory region. There are hardware limitations that mean that only 64bit naturally aligned accesses are safe in all cases. Due to being write-combined memory region two 32bit accesses may be coalesced to form a 64bit non 64bit aligned access. Solution was to open-code the memory copy routines using pointers and to only enable PIO for x86_64 machines. Not tested on platforms other than x86_64 because this patch disables the PIO feature on other platforms. Compile-tested on x86 to ensure that works. The WARN_ON_ONCE() code in the previous version of this patch has been moved into the internal sfc debug driver as the assertion was unnecessary in the upstream kernel code. This bug fix applies to v3.13 and v3.14 stable branches. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11Merge branch 'bridge-next'David S. Miller
Toshiaki Makita says: ==================== bridge: 802.1ad vlan protocol support Currently bridge vlan filtering doesn't work fine with 802.1ad protocol. Only if a bridge is configured without pvid, the bridge receives only 802.1ad tagged frames and no STP is used, it will work. Otherwise: - If pvid is configured, it can put only 802.1Q tags but cannot put 802.1ad tags. - If 802.1Q and 802.1ad tagged frames arrive in mixture, it applies filtering regardless of their protocols. - While an 802.1ad bridge should use another mac address for STP BPDU and should forward customer's BPDU frames, it can't. Thus, we can't properly handle frames once 802.1ad is used. Handling 802.1ad is useful if we want to allow stacked vlans to be used, e.g., guest VMs wants to use vlan tags and the host also wants to segregate guest's traffic from other guests' by vlan tags. Here is the image describing how to configure a bridge to filter VMs traffic. +-------+p/u +-----+ +---------+ +----+ | |------|vnet0|--|User A VM| |eth0|--|802.1ad| +-----+ +---------+ +----+ |bridge |p/u +-----+ +---------+ | |------|vnet1|--|User B VM| +-------+ +-----+ +---------+ p/u: pvid/untagged This patch set enables us to set vlan protocols per bridge. This tries to implement a bridge like S-VLAN component in IEEE 802.1Q-2011 spec. Note that there is another possible implementation that sets vlan protocols per port. Some HW switches seem to take that approach. However, I think per-bridge approach is better, because; - I think the typical usage of an 802.1ad bridge is segregating 802.1Q tagged traffic (like what is described above), and this doesn't need the ability to be set protocols per port. Also, If a bridge has many ports and it supports per-port setting, we might have to make much more extra configurations to change protocols of all ports. - I assume that the main perpose to set protocol per port is to assign S-VID according to C-VID, or to realize two logical bridges (one is an 802.1Q filtering bridge and the other is an 802.1ad filtering bridge) in one bridge. The former usually needs additional features such as vlan id mapping, and is likely to make bridge's code complicated. If a user wants, such enhanced features can be accomplished by a combination of multiple bridges, so it is not absolutely necessary to implement these features in a bridge itself. The latter is simply unnecessary because we can easily make two bridges of which one is an 802.1Q bridge and the other is an 802.1ad bridge. Here is an example of the enhanced feature that we can realize by using multiple bridges and veth interfaces. This way is documented in IEEE 802.1Q-2011 clause 15.4 (C-tagged service interface). +----+ +-------+p/u +------+ +----+ +--+ |eth0|--|802.1ad|----veth----|802.1Q|--|vnet|--|VM| +----+ |bridge |----veth----|bridge| +----+ +--+ +-------+p/u +------+ p/u: pvid/untagged In this configuration, we can map C-VIDs to any S-VID. For example; C-VID 10 and 20 to S-VID 100 C-VID 30 to S-VID 110 This is achieved through the 802.1Q bridge that forwards C-tagged frames to proper ports of the 802.1ad bridge. Changes: v1 -> v2: - Make the way to forward bridge group addresses more generic by introducing new mask, group_fwd_mask_required. RFC -> v1: - Add S-TAG tx offload. - Remove a fix around stacked vlan which has already been fixed. - Take into account Bridge Group Addresses. - Separate handling of protocol-mismatch from br_vlan_get_tag(). - Change the way to set vlan_proto from netlink to sysfs because no other existing configuration per bridge can be set by netlink. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11bridge: Support 802.1ad vlan filteringToshiaki Makita
This enables us to change the vlan protocol for vlan filtering. We come to be able to filter frames on the basis of 802.1ad vlan tags through a bridge. This also changes br->group_addr if it has not been set by user. This is needed for an 802.1ad bridge. (See IEEE 802.1Q-2011 8.13.5.) Furthermore, this sets br->group_fwd_mask_required so that an 802.1ad bridge can forward the Nearest Customer Bridge group addresses except for br->group_addr, which should be passed to higher layer. To change the vlan protocol, write a protocol in sysfs: # echo 0x88a8 > /sys/class/net/br0/bridge/vlan_protocol Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11bridge: Prepare for forwarding another bridge group addressesToshiaki Makita
If a bridge is an 802.1ad bridge, it must forward another bridge group addresses (the Nearest Customer Bridge group addresses). (For details, see IEEE 802.1Q-2011 8.6.3.) As user might not want group_fwd_mask to be modified by enabling 802.1ad, introduce a new mask, group_fwd_mask_required, which indicates addresses the bridge wants to forward. This will be set by enabling 802.1ad. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11bridge: Prepare for 802.1ad vlan filtering supportToshiaki Makita
This enables a bridge to have vlan protocol informantion and allows vlan tag manipulation (retrieve, insert and remove tags) according to the vlan protocol. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11bridge: Add 802.1ad tx vlan accelerationToshiaki Makita
Bridge device doesn't need to embed S-tag into skb->data. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: xen-netback: include linux/vmalloc.h againArnd Bergmann
commit e9ce7cb6b107 ("xen-netback: Factor queue-specific data into queue struct") added a use of vzalloc/vfree to interface.c, but removed the #include <linux/vmalloc.h> statement at the same time, which causes this build error: drivers/net/xen-netback/interface.c: In function 'xenvif_free': drivers/net/xen-netback/interface.c:754:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration] vfree(vif->queues); ^ cc1: some warnings being treated as errors Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Andrew J. Bennieston <andrew.bennieston@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: phy: realtek: register/unregister multiple drivers properlyJongsung Kim
Using phy_drivers_register/_unregister functions is proper way to handle multiple PHY drivers registration. For Realtek PHY drivers module, it fixes incomplete current error-handlings up and adds missed unregistration for the RTL8201CP driver. Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: sh_eth: Fix timing of RACT setting in sh_eth_rx()Yoshihiro Shimoda
This patch fixes an issue that we cannot use nfs rootfs correctly on r8a7790 when the command below runs on a host PC. $ sudo ping -f -l 8 $BOARD_IP_ADDR Since the driver sets the RACT to 1 in the first while loop of sh_eth_rx(), the controller accepts a next frame into the next RX descriptor during the while loop. But, in the first while loop doesn't allocate a next skb. So, this patch removes the RACT setting in the first while loop of sh_eth_rx(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: sh_eth: Fix receive packet "exceeded" condition in sh_eth_rx()Yoshihiro Shimoda
This patch fixes the packet "exceeded" condition in sh_eth_rx() when RACT in an RX descriptor is not set and the "quota" is 0. Otherwise, kernel panic happens because the "&n->poll_list" is deleted twice in sh_eth_poll() which calls napi_complete() and net_rx_action(). Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: filter: fix warning on 32-bit archAlexei Starovoitov
fix compiler warning on 32-bit architectures: net/core/filter.c: In function '__sk_run_filter': net/core/filter.c:540:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] net/core/filter.c:550:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] net/core/filter.c:560:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11tipc: fix potential bug in function tipc_backlog_rcvJon Paul Maloy
In commit 4f4482dcd9a0606a30541ff165ddaca64748299b ("tipc: compensate for double accounting in socket rcv buffer") we access 'truesize' of a received buffer after it might have been released by the function filter_rcv(). In this commit we correct this by reading the value of 'truesize' to the stack before delivering the buffer to filter_rcv(). Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: sxgbe: remove duplicate SXGBE_CORE_L34_ADDCTL_REG defineDan Carpenter
The SXGBE_CORE_L34_ADDCTL_REG define is cut and pasted twice so we can delete the second instance. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11qlcnic: remove duplicate QLC_83XX_GET_LSO_CAPABILITY defineDan Carpenter
The QLC_83XX_GET_LSO_CAPABILITY define is cut and pasted twice so we can delete the second instance. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11Merge branch 'mlx4'David S. Miller
Amir Vadai says: ==================== cpumask,net: affinity hint helper function This patchset will set affinity hint to influence IRQs to be allocated on the same NUMA node as the one where the card resides. As discussed in http://www.spinics.net/lists/netdev/msg271497.html If number of IRQs allocated is greater than the number of local NUMA cores, all local cores will be used first, and the rest of the IRQs will be on a remote NUMA node. If no NUMA support - IRQ's and cores will be mapped 1:1 Since the utility function to calculate the mapping could be useful in other mq drivers in the kernel, it was added to cpumask.[ch] This patchset was tested and applied on top of net-next since the first consumer is a network device (mlx4_en). Over commit fff1f59 "mac802154: llsec: add forgotten list_del_rcu in key removal" ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net/mlx4_en: Use affinity hintYuval Atias
The “affinity hint” mechanism is used by the user space daemon, irqbalancer, to indicate a preferred CPU mask for irqs. Irqbalancer can use this hint to balance the irqs between the cpus indicated by the mask. We wish the HCA to preferentially map the IRQs it uses to numa cores close to it. To accomplish this, we use cpumask_set_cpu_local_first(), that sets the affinity hint according the following policy: First it maps IRQs to “close” numa cores. If these are exhausted, the remaining IRQs are mapped to “far” numa cores. Signed-off-by: Yuval Atias <yuvala@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11cpumask: Utility function to set n'th cpu - local cpu firstAmir Vadai
This function sets the n'th cpu - local cpu's first. For example: in a 16 cores server with even cpu's local, will get the following values: cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set ... cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set ... cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set Curently this function will be used by multi queue networking devices to calculate the irq affinity mask, such that as many local cpu's as possible will be utilized to handle the mq device irq's. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management update from Zhang Rui: "Specifics: - fix a bug in Exynos thermal driver, which overwrites the hardware trip point threshold when updating software trigger levels and results in emergency shutdown. From: Tushar Behera. - add thermal sensor support for Armada 375 and 38x SoCs. From Ezequiel Garcia. - add TMU (Thermal Management Unit) support for Exynos5260 and Exynos5420 SoCs. From Naveen Krishna Chatradhi. - add support for the additional digital temperature sensors in the Intel SoCs like Bay Trail. From: Srinivas Pandruvada. - a couple of cleanups and small fixes from Jingoo Han, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven, Jacob Pan, Paul Walmsley and Lan,Tianyu" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (21 commits) thermal: spear: remove unnecessary OOM messages thermal: exynos: remove unnecessary OOM messages thermal: rcar: remove unnecessary OOM messages thermal: armada: Support Armada 380 SoC thermal: armada: Support Armada 375 SoC thermal: armada: Allow to specify an 'inverted readout' sensor thermal: armada: Pass the platform_device to init_sensor() thermal: armada: Add generic infrastructure to handle the sensor thermal: armada: Add infrastructure to support generic formulas thermal: armada: Rename armada_thermal_ops struct thermal/intel_powerclamp: add newer cpu ids thermal: rcar: Use pm_runtime_put() i.s.o. pm_runtime_put_sync() thermal: samsung: Only update available threshold limits Thermal/int3403: Fix thermal hysteresis unit conversion thermal: Intel SoC DTS thermal thermal: samsung: Add TMU support for Exynos5260 SoCs thermal: samsung: Add TMU support for Exynos5420 SoCs thermal: samsung: change base_common to more meaningful base_second thermal: samsung: replace inten_ bit fields with intclr_ thermal: offer Samsung thermal support only when ARCH_EXYNOS is defined ...
2014-06-11Merge tag 'pwm/for-3.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "The majority of these changes are cleanups and fixes across all drivers. Redundant error messages are removed and more PWM controllers set the .can_sleep flag to signal that they can't be used in atomic context. Support is added for the Broadcom Kona family of SoCs and the Intel LPSS driver can now probe PCI devices in addition to ACPI devices. Upon shutdown, the pwm-backlight driver will now power off the backlight. It also uses the new descriptor-based GPIO API for more concise GPIO handling. A large chunk of these changes also converts platforms to use the lookup mechanism rather than relying on the global number space to reference PWM devices. This is largely in preparation for more unification and cleanups in future patches. Eventually it will allow the legacy PWM API to be removed" * tag 'pwm/for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (38 commits) pwm: fsl-ftm: set pwm_chip can_sleep flag pwm: ab8500: Fix wrong value shift for disable/enable PWM pwm: samsung: do not set manual update bit in pwm_samsung_config pwm: lp3943: Set pwm_chip can_sleep flag pwm: atmel: set pwm_chip can_sleep flag pwm: mxs: set pwm_chip can_sleep flag pwm: tiehrpwm: inline accessor functions pwm: tiehrpwm: don't build PM related functions when not needed pwm-backlight: retrieve configured PWM period leds: leds-pwm: retrieve configured PWM period ARM: pxa: hx4700: use PWM_LOOKUP to initialize struct pwm_lookup ARM: shmobile: armadillo: use PWM_LOOKUP to initialize struct pwm_lookup ARM: OMAP3: Beagle: use PWM_LOOKUP to initialize struct pwm_lookup pwm: modify PWM_LOOKUP to initialize all struct pwm_lookup members ARM: pxa: hx4700: initialize all the struct pwm_lookup members ARM: OMAP3: Beagle: initialize all the struct pwm_lookup members pwm: renesas-tpu: remove unused struct tpu_pwm_platform_data ARM: shmobile: armadillo: initialize all struct pwm_lookup members pwm: add period and polarity to struct pwm_lookup pwm: twl: Really disable twl6030 PWMs ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 12:14:27 +0000