summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-12-30V4L/DVB (9925): tuner-core: add debug msg's when asking tuner to sleepMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9923): xc5000: remove init_fw optionDevin Heitmueller
The init_fw option was broken for the HVR-950q because we would call the reset callback inside of dvb_attach() and the callback had not been setup yet. Michael Krufky (who added the init_fw feature) says it's no longer required, so just remove the option completely. Thanks to user Zzeiss from #linuxtv chat for reporting the issue and Michael Krufky <mkrufky@linuxtv.org> for proposing the fix. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9922): em28xx: don't assume every eb1a:2820 reference design is a ↵Devin Heitmueller
Prolink PlayTV USB2 Don't operate under the assumption that every device that uses the em2820 default USB ID is a Prolink PlayTV USB. We have an eeprom hash, so use that, since otherwise we cannot support other devices with the 2820 default USB ID (such as the ADS Tech Instant TV USB USBAV-704) Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9921): em28xx: add chip id for em2874Devin Heitmueller
Add the em2870 to the list of known em28xx chip ids. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9918): cx88: advise/acquire clean-up for HVR-1300/3000/4000Darron Broad
This cleans-up the advise/acquire methods. This has been tested on the hvr-1300/4000 and assumed to be correct on the hvr-3000. This update also fixes analogue tuning on the hvr-1300 when in blackbird mode. Signed-off-by: Darron Broad <darron@kewl.org> Cc: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9917): cx24116: change to ALGO_HWDarron Broad
Slow tuning, EG: > szap-s2 -r -c 39.FTATV "1=Pgm1;Net1" reading channels from file '39.FTATV' zapping to 3 '1=Pgm1;Net1': delivery DVB-S, modulation QPSK sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35 vpid 0x0200, apid 0x0300, sid 0x0001 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 00 | signal c2c0 | snr 0000 | ber 00012d4a | unc 00000000 | status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal c040 | snr bb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Appears to be resolved by dropping zig-zag tuning and relying on hardware only: > szap-s2 -r -c 39.FTATV "1=Pgm1;Net1" reading channels from file '39.FTATV' zapping to 3 '1=Pgm1;Net1': delivery DVB-S, modulation QPSK sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35 vpid 0x0200, apid 0x0300, sid 0x0001 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal c040 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Tuning to a weaker channel shows that the hardware recovers sync: status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fd40 | snr 5000 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fd80 | snr 5000 | ber 00000000 | unc 00000000 | status 01 | signal fd80 | snr 4e66 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | status 01 | signal fd80 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Also, tuning, moving the dish and then restoring the dish also retunes. Signed-off-by: Darron Broad <darron@kewl.org> Cc: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9916): dvb-core: don't add an event when in ONE SHOT mode for algo ↵Darron Broad
type HW It has been noticed that in HW tuning mode in cx24123.c that a check is made to not alter the status var when in one shot mode, a simpler solution is to not update here for all cards. Cc: Steven Toth <stoth@hauppauge.com> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9915): cx24116: fix retune regression introduced in 70ee86a7c630Darron Broad
Thanks to AKPM for spotting this. Cc: Steven Toth <stoth@hauppauge.com> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9914): cx24116: bugfix: add missing delsys in FEC lookupDarron Broad
Delsys was missing when searching for FEC in table. This fixes FEC lookup for DVB-S2 QPSK modulation. Cc: Steven Toth <stoth@hauppauge.com> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9913): tuner-xc2028: allow printing stack trace as debug on sleep codeMauro Carvalho Chehab
tuner-xc3028 can be put to sleep to save power. However, if not properly recovered from sleep, the device won't work. It is noticed that some devices doesn't recover properly, so let's add a dump_stack() as a debug option, to allow us to track when this happens. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9912): em28xx: fix/improve em28xx locking schemaMauro Carvalho Chehab
Changes/fixes on em28xx dev->lock: - em28xx_init_dev() were unlocking without a previous lock; - some read ioctls need to lock after the removal of KBL, since a write may be happening at the same time an ioctl is reading; - keep the device locked during all device initialization; - lock/unlock while reading/writing registers. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9911): em28xx: vidioc_try_fmt_vid_cap() doesn't need any lockMauro Carvalho Chehab
vidioc_try_fmt_vid_cap() just checks if a given resolution is supported. It doesn't touch on struct em28xx device descriptor. so, there's no need to lock. While there, use unlikely() for those values that aren't likely to occur. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9910): em28xx: move res_get locks to the caller routinesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9909): em28xx: move dev->lock from res_free to the caller routinesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9905): v4l2-compat32: add missing newline after kernel messageHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9904): v4l: fix compile warning.Hans Verkuil
Fix (bogus) compile warning about uninitialized variable. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9903): uvcvideo: V4L2 zoom controls supportLaurent Pinchart
Add support for absolute and continuous zoom controls (mapped to absolute and relative UVC zoom controls). Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9902): uvcvideo: V4L2 privacy control supportLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9899): v4l2: Add missing control namesLaurent Pinchart
Update v4l2_ctrl_get_name() and v4l2_ctrl_get_menu() with missing control names and menu values. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9898): v4l2: Add privacy controlLaurent Pinchart
The privacy control prevents video from being acquired by the camera. A true value indicates that no image can be captured. Devices that implement the privacy control must support read access and may support write access. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9897): v4l2: Add camera zoom controlsLaurent Pinchart
The zoom controls move the zoom lens group to a an absolute position, as a relative displacement or at a given speed until reaching physical device limits. Positive values move the zoom lens group towards the telephoto direction, negative values towards the wide-angle direction. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9895): cx18: Refine the firmware load and firmware startup processAndy Walls
Refine the firmware load and firmware startup process. Significant changes are to ensure the SCB and IPC area are correct before starting up the firmware, and letting the CPU firmware start up the APU firmware for us. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9894): cx18: Use a known open task handle when setting stream ↵Andy Walls
CX2341x parameters cx18: Use a known open task handle when setting stream CX2341x parameters Sometimes, we might only have VBI or YUV stream open instead of an MPEG stream. Let's make sure we use a valid task handle to perform the CX2341x control settings. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9893): cx18: Convert some list manipulations to emphasize entries ↵Andy Walls
not lists Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9892): cx18: VBI comment corrections and comments about VBI issuesAndy Walls
VBI comment corrections to avoid future confusion about standards. Comments on cx18 VBI implementation shortcomings that need resolution. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9891): cx18 Replace magic number 63 with CX18_MAX_FW_MDLS_PER_STREAMAndy Walls
Removed magic number that referred to firmware limit on the number of MDLs the firmware can maintain for any stream at any one time. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9889): CX24113: Fixed more typosPatrick Boettcher
Uwe Bugla pointed out that there are some more typos in some print-statements. Fixed. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9888): Patch: fix a typo in cx24113.cUwe Bugla
This patch fixes a typo in cx24113.c. Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9887): Minor fixes for cx24113-driver (codingstyle)Patrick Boettcher
Fixed some minor coding style issues and some driver information printed when using the driver on a board. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9884): gspca - ov534: Fix a warning when compilation without ↵Jean-Francois Moine
GSPCA_DEBUG. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9883): gspca - ov534: Show sensor ID.Antonio Ospite
The original version of sccb_read_reg() is from Jim Paris. NOTE: as it is now reading sensor ID won't work for sensors on different i2c slave address. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9882): gspca - ov534: Fix typo.Antonio Ospite
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9880): gspca - vc032x: Add V&H flips and sharpness controls for ↵Jean-Francois Moine
sensor po1200. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9879): gspca - vc032x: Remove the unused quality/qindex.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9878): gspca - vc032x: Fix frame overflow errors with vc0321.Hans de Goede
The vc0321 sends some additional data after sending the complete frame, we ignore this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9877): gspca - ov534: Add framerate support.Jim Paris
Add support for getting and setting framerate via v4l2 controls, rather than setting a fixed value at module insertion. Signed-off-by: Jim Paris <jim@jtan.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9876): gspca - main: Allow subdrivers to handle v4l2_streamparm ↵Jim Paris
requests. Add get_streamparm and set_streamparm operations so subdrivers can get/set stream parameters such as framerate. Signed-off-by: Jim Paris <jim@jtan.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9874): gspca - ov534: Explicitly initialize frame format.Jim Paris
Set frame format registers 0x0a and 0x0b to explicit values rather than relying on reset-time defaults. Signed-off-by: Jim Paris <jim@jtan.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9873): gspca - ov534: Improve payload handling.Jim Paris
Frame data in bulk transfers is separated into 2048-byte payloads. Each payload has its own header. Signed-off-by: Jim Paris <jim@jtan.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9871): gspca - vc032x: Bad detection of sensor mi0360.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9870): gspca - vc032x: Webcam 15b8:6002 and sensor po1200 added.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9869): gspca - zc3xx: Change the USB exchanges for the sensor pas202b.Jean-Francois Moine
This sensor was declared as hdcs2020. The new exchanges have been extracted from the ms-win file usbvm31b.inf. The light frequency control has been added. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9868): gspca - zc3xx: Remove the duplicated register namesJean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9867): gspca - vc032x: Remove the autogain control.Jean-Francois Moine
This control was not coded. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9866): gspca - vc032x: V and H flips added for sensors ov7660 and 7670.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9865): gspca - vc032x: Bad check of the sensor mi0360.Jean-Francois Moine
Error was due to bad variable names. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9864): gspca - ov519: Change copyright information.Romain Beauxis
Signed-off-by: Romain Beauxis <toots@rastageeks.org> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9863): gspca - sonixj: Cleanup / simplify code.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9861): gspca - ov534: Accept many simultaneous webcams.Jean-Francois Moine
This patch moves the last fid and pts from static to the sd structure. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9860): gspca - ov534: Frame transfer improvements.Jim Paris
The indirect registers at 0x1c/0x1d control frame settings. If we leave the values at 0x0a and 0x0b at their reset-time defaults, frame data from the camera matches the UVC payload format. This lets us better reassemble the data into frames and know when data was lost. This also lets us relax the bulk_size requirement from 600K to 2K, which should help systems on with limited RAM (like the PS3). Signed-off-by: Jim Paris <jim@jtan.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>