summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-10Input: cyttsp - error message on boot mode exit errorLinus Walleij
Provide a proper error message when attempting to exit boot loader mode and failing, which is something that happened to me. Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210408131153.3446138-5-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-10Input: apbps2 - remove useless variableJiapeng Chong
Fix the following gcc warning: drivers/input/serio/apbps2.c:106:16: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/1617958859-64707-1-git-send-email-jiapeng.chong@linux.alibaba.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-09Input: mms114 - support MMS136Linus Walleij
The Melfas MMS136 is similar to the other MMS variants but has event packages of 6 bytes rather than 8 as the others. The define is named FINGER_EVENT_SZ in the vendor drivers so I renamed it from MMS*_PACKET_SZ to MMS*_EVENT_SZ. After this patch, the touchscreen on the Samsung GT-I8530 works fine with PostmarketOS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210404232619.3092682-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-09Input: mms114 - convert bindings to YAML and extendLinus Walleij
This converts the Melfas MMS114 bindings and extend like this: - Require nodename touchscreen@ (this seems to be the case for all in-tree DTS files) - Add the mms134s and mms136 compatibles - Add the avdd and vdd power supplies - Define the I2C clock frequency property Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210330201233.2360006-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-09Input: Add support for ILITEK Lego SeriesJoe Hung
Add support for ILITEK Lego series of touch devices. Lego series includes ILITEK 213X/23XX/25XX. Tested/passed with evaluation board with ILI2520/2322 IC. Signed-off-by: Joe Hung <joe_hung@ilitek.com> Link: https://lore.kernel.org/r/20210324122601.125873-2-joe_hung@ilitek.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-09dt-bindings: input: touchscreen: ilitek_ts_i2c: Add bindingsJoe Hung
Add binding documentation for ILITEK touch devices. Signed-off-by: Joe Hung <joe_hung@ilitek.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210324122601.125873-1-joe_hung@ilitek.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-09Input: add MStar MSG2638 touchscreen driverVincent Knecht
Add support for the msg2638 touchscreen IC from MStar. Firmware handling, wakeup gestures and other specialties are not supported. This driver reuses zinitix.c structure, while the checksum and irq handler functions are based on out-of-tree driver for Alcatel Idol 3 (4.7"). Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210305153815.126937-2-vincent.knecht@mailoo.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-09dt-bindings: input/touchscreen: add bindings for msg2638Vincent Knecht
This adds dts bindings for the mstar msg2638 touchscreen. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210305153815.126937-1-vincent.knecht@mailoo.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-09Input: silead - add workaround for x86 BIOS-es which bring the chip up in a ↵Hans de Goede
stuck state Some buggy BIOS-es bring up the touchscreen-controller in a stuck state where it blocks the I2C bus. Specifically this happens on the Jumper EZpad 7 tablet model. After much poking at this problem I have found that the following steps are necessary to unstuck the chip / bus: 1. Turn off the Silead chip. 2. Try to do an I2C transfer with the chip, this will fail in response to which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first drop the chip of the bus by turning it off. 3. Turn the chip back on. On the x86/ACPI systems were this problem is seen, step 1. and 3. require making ACPI calls and dealing with ACPI Power Resources. This commit adds a workaround which runtime-suspends the chip to turn it off, leaving it up to the ACPI subsystem to deal with all the ACPI specific details. There is no good way to detect this bug, so the workaround gets activated by a new "silead,stuck-controller-bug" boolean device-property. Since this is only used on x86/ACPI, this will be set by model specific device-props set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new device-property is not documented in the DT-bindings. Dmesg will contain the following messages on systems where the workaround is activated: [ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error [ 55.373593] i2c_designware 808622C1:04: controller timed out [ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-09Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devicesHans de Goede
Several users have been reporting that elants_i2c gives several errors during probe and that their touchscreen does not work on their Lenovo AMD based laptops with a touchscreen with a ELAN0001 ACPI hardware-id: [ 0.550596] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vcc33 not found, using dummy regulator [ 0.551836] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vccio not found, using dummy regulator [ 0.560932] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.562427] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.595925] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.597974] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.621893] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.622504] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.632650] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (4d 61 69 6e): -121 [ 0.634256] elants_i2c i2c-ELAN0001:00: boot failed: -121 [ 0.699212] elants_i2c i2c-ELAN0001:00: invalid 'hello' packet: 00 00 ff ff [ 1.630506] elants_i2c i2c-ELAN0001:00: Failed to read fw id: -121 [ 1.645508] elants_i2c i2c-ELAN0001:00: unknown packet 00 00 ff ff Despite these errors, the elants_i2c driver stays bound to the device (it returns 0 from its probe method despite the errors), blocking the i2c-hid driver from binding. Manually unbinding the elants_i2c driver and binding the i2c-hid driver makes the touchscreen work. Check if the ACPI-fwnode for the touchscreen contains one of the i2c-hid compatiblity-id strings and if it has the I2C-HID spec's DSM to get the HID descriptor address, If it has both then make elants_i2c not bind, so that the i2c-hid driver can bind. This assumes that non of the (older) elan touchscreens which actually need the elants_i2c driver falsely advertise an i2c-hid compatiblity-id + DSM in their ACPI-fwnodes. If some of them actually do have this false advertising, then this change may lead to regressions. While at it also drop the unnecessary DEVICE_NAME prefixing of the "I2C check functionality error", dev_err already outputs the driver-name. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207759 Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202756.16830-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-04-07Input: gpio-keys - fix crash when disabliing GPIO-less buttonsDmitry Torokhov
My brain-damaged adjustments to Paul's patch caused crashes in gpio_keys_disable_button() when driver is used in GPIO-less (i.e. purely interrupt-driven) setups, because I mixed together debounce and release timers when they are in fact separate: Unable to handle kernel NULL pointer dereference at virtual address 0000000c ... PC is at hrtimer_active+0xc/0x98 LR is at hrtimer_try_to_cancel+0x24/0x140 ... [<c01c43b8>] (hrtimer_active) from [<c01c50f4>] (hrtimer_try_to_cancel+0x24/0x140) [<c01c50f4>] (hrtimer_try_to_cancel) from [<c01c5224>] (hrtimer_cancel+0x14/0x4c) [<c01c5224>] (hrtimer_cancel) from [<bf1cae24>] (gpio_keys_attr_store_helper+0x1b8/0x1d8 [gpio_keys]) [<bf1cae24>] (gpio_keys_attr_store_helper [gpio_keys]) from [<bf1cae80>] (gpio_keys_store_disabled_keys+0x18/0x24 [gpio_keys]) [<bf1cae80>] (gpio_keys_store_disabled_keys [gpio_keys]) from [<c038ec7c>] (kernfs_fop_write_iter+0x10c/0x1cc) [<c038ec7c>] (kernfs_fop_write_iter) from [<c02df858>] (vfs_write+0x2ac/0x404) [<c02df858>] (vfs_write) from [<c02dfaf4>] (ksys_write+0x64/0xdc) [<c02dfaf4>] (ksys_write) from [<c0100080>] (ret_fast_syscall+0x0/0x58) Let's fix it up. Fixes: c9efb0ba281e ("Input: gpio-keys - use hrtimer for software debounce, if possible") Reported-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/YG1DFFgojSVfdpaz@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-27Input: imx_keypad - convert to a DT-only driverFabio Estevam
i.MX has been converted to a DT-only platform, so make the adjustments to the driver to convert it to a DT-only driver. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210327194307.541248-1-festevam@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: elan_i2c - fix a typo in parameter nameNikolai Kostrigin
s/max_baseliune/max_baseline/ Signed-off-by: Nikolai Kostrigin <nickel@altlinux.org> Link: https://lore.kernel.org/r/20210311114146.1977616-1-nickel@altlinux.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: move to use request_irq by IRQF_NO_AUTOEN flagBarry Song
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable because of requesting. On the other hand, request_irq() after setting IRQ_NOAUTOEN as below irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...); can also be replaced by request_irq() with IRQF_NO_AUTOEN flag. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Link: https://lore.kernel.org/r/20210302224916.13980-3-song.bao.hua@hisilicon.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Merge tag 'irq-no-autoen-2021-03-25' of ↵Dmitry Torokhov
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Sync up with the tip tree to pick up IRQF_NO_AUTOEN.
2021-03-25Merge tag 'v5.12-rc4' into nextDmitry Torokhov
Sync up with the mainline to bring in newest APIs.
2021-03-25Input: cyttsp - verbose error on soft resetLinus Walleij
The first thing the Cypress driver does when starting up is to try a soft reset. This is the first point where the driver SPI/I2C communication can fail, so put out some nice debug text: cyttsp-spi spi2.0: failed to send soft reset Instead of just: cyttsp-spi: probe of spi2.0 failed with error -5 This is more helpful. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210322221349.1116666-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25dt-bindings: input: iqs5xx: Convert to YAMLJeff LaBundy
This patch converts the legacy text-based binding document to YAML format. Extraneous details and touchscreen properties that weren't actually supported have been dropped. The reset GPIO has since been made optional in the driver; this is now reflected here as well. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210323021006.367-2-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - make reset GPIO optionalJeff LaBundy
The device's hardware reset pin is only required if the platform must be able to update the device's firmware. As such, demote the reset GPIO to optional in support of devices that ship with pre-programmed firmware and don't route the reset pin back to the SoC. In that case, the 'fw_file' attribute is hidden because there is no way to open the bootloader. The logic is extended to the case in which the device does not advertise bootloader support in the first place. Last but not least, remove the hardware reset performed at probe because there is no reason to reset the device manually. A power on reset function already ensures a clean reset at start-up. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210323021006.367-1-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: Add support for Azoteq IQS626AJeff LaBundy
This patch adds support for the Azoteq IQS626A capacitive touch controller. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210301234928.4298-5-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25dt-bindings: input: Add bindings for Azoteq IQS626AJeff LaBundy
This patch adds device tree bindings for the Azoteq IQS626A capacitive touch controller. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210301234928.4298-4-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: touchscreen - broaden use-cases described in commentsJeff LaBundy
Now that the helper functions have been moved to drivers/input/ so that all input devices may use them, the introductory comments can be updated to remove any implication that the helper functions are solely limited to touchscreens. This patch also scrubs any remaining use of 'DT' since there isn't any actual dependency on OF. A minor spelling error is resolved as well ('setups' -> 'sets up'). Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210301234928.4298-3-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: touchscreen - move helper functions to coreJeff LaBundy
Some devices outside of drivers/input/touchscreen/ can still make use of the touchscreen helper functions. Therefore, it was agreed in [1] to move them outside of drivers/input/touchscreen/ so that other devices can call them without INPUT_TOUCHSCREEN being set. As part of this change, 'of' is dropped from the filename because the helpers no longer actually use OF. No changes are made to the file contents whatsoever. Based on the feedback in [2], the corresponding binding documents (touchscreen.yaml and touchscreen.txt) are left in their original locations. [1] https://patchwork.kernel.org/patch/11924029/ [2] https://patchwork.kernel.org/patch/12042037/ Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210301234928.4298-2-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: wacom_i2c - switch to using managed resourcesDmitry Torokhov
This simplifies error unwinding path and allows us to get rid of remove() method. Reviewed-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20210321220043.318239-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: wacom_i2c - do not force interrupt triggerDmitry Torokhov
Instead of forcing interrupt trigger to "level low" rely on the platform to set it up according to how it is wired on the given board. Reviewed-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20210321220043.318239-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - close bootloader using hardware resetJeff LaBundy
The bootloader can be closed using the 'execute' command (0x02) or hardware reset. Rather than using the former option for successful firmware update procedures and reserving the latter for recovering the device upon failure, simply use hardware reset for all cases. The post-bootloader initialization delay increases marginally when triggered by a hardware reset, so increase the wait time to ensure the device does not subsequently fail to respond. As part of this change, refactor the return path to avoid an extra assignment and to make the logic a bit smaller. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210313191236.4366-6-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - remove superfluous revision validationJeff LaBundy
The vendor-assigned firmware project number is restricted to the generic project number (15); however the vendor may assign other project numbers to specific applications and customers. These custom project numbers may be based on forwards-compatible firmware revision 1.x. However, the driver unnecessarily rejects anything older than firmware revision 2.0. To support other applications, remove these unnecessarily strict checks and enter the bootloader only for truly incompatible A000 devices. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210313191236.4366-5-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - expose firmware revision to user spaceJeff LaBundy
Add the read-only 'fw_info' attribute which reports information about the device's firmware in the following format: a.b.c.d:e.f Where: a = Product number (e.g. 40 for IQS550) b = Project number (e.g. 15) c = Firmware revision (major) d = Firmware revision (minor) e = Customer-assigned exported file version (major) f = Customer-assigned exported file version (minor) As part of the corresponding rework to uses of 'bl_status', the IQS5XX_BL_STATUS_RESET definition is dropped with 0 used in its place instead. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210313191236.4366-4-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - optimize axis definition and validationJeff LaBundy
Set the maximum ABS_MT_PRESSURE value and use the existing U16_MAX definition instead of a magic number to validate ABS_MT_POSITION_X and ABS_MT_POSITION_Y. Also use input_set_abs_params() rather than input_abs_set_max() to avoid having to call input_set_capability() separately. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210313191236.4366-3-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - update vendor's URLJeff LaBundy
Replace 'http' with 'https' and correct the spelling of the nearby word 'datasheet'. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210313191236.4366-2-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: silead - fix a typoBhaskar Chowdhury
s/subsytem/subsystem/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210322022030.3857089-1-unixbhaskar@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: gpio-keys - use hrtimer for software debounce, if possiblePaul Cercueil
We want to be able to report the input event as soon as the debounce delay elapsed. However, the current code does not really ensure that, as it uses the jiffies-based schedule_delayed_work() API. With a small enough HZ value (HZ <= 100), this results in some input events being lost, when a key is quickly pressed then released (on a human's time scale). Switching to hrtimers fixes this issue, and will work even on extremely low HZ values (tested at HZ=24). This is however only possible if reading the GPIO is possible without sleeping. If this condition is not met, the previous approach of using a jiffies-based timer is taken. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20210307222240.380583-3-paul@crapouillou.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: gpio-keys - use hrtimer for release timerPaul Cercueil
Dealing with input, timing is important; if the button should be released in one millisecond, then it should be done in one millisecond and not a hundred milliseconds. Therefore, the standard timer API is not really suitable for this task. Convert the gpio-keys driver to use a hrtimer instead of the standard timer to address this issue. Note that by using a hard IRQ for the hrtimer callback, we can get rid of the spin_lock_irqsave() and spin_unlock_irqrestore(). Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20210307222240.380583-2-paul@crapouillou.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: gpio-keys - remove extra call to input_syncPaul Cercueil
The input_sync() function is already called after the loop in gpio_keys_report_state(), so it does not need to be called after each iteration within gpio_keys_gpio_report_event(). Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20210307222240.380583-1-paul@crapouillou.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: rotary-encoder - update docs according to the latest API changesHeikki Krogerus
The old device property API is about to be removed, so explaing how to use complete software nodes instead. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210304090948.27014-1-heikki.krogerus@linux.intel.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25dt-bindings: input: atmel,maxtouch: add wakeup-sourceKrzysztof Kozlowski
The touchscreen can be a wake up source and it's being used in DTS: arch/arm/boot/dts/exynos5250-spring.dt.yaml: trackpad@4b: 'wakeup-source' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210212163806.69996-1-krzk@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: max8997 - simplify open coding of a division using up to 64 divisionsUwe Kleine-König
The for loop is just a complicate way to express a division. Replace it by the actual division which is both simpler to understand for a human and more efficient for a CPU to calculate. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210316212233.50765-1-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-21Linux 5.12-rc4Linus Torvalds
2021-03-21Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Miscellaneous ext4 bug fixes for v5.12" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: initialize ret to suppress smatch warning ext4: stop inode update before return ext4: fix rename whiteout with fast commit ext4: fix timer use-after-free on failed mount ext4: fix potential error in ext4_do_update_inode ext4: do not try to set xattr into ea_inode if value is empty ext4: do not iput inode under running transaction in ext4_rename() ext4: find old entry again if failed to rename whiteout ext4: fix error handling in ext4_end_enable_verity() ext4: fix bh ref count on error paths fs/ext4: fix integer overflow in s_log_groups_per_flex ext4: add reclaim checks to xattr code ext4: shrink race window in ext4_should_retry_alloc()
2021-03-21Merge tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring followup fixes from Jens Axboe: - The SIGSTOP change from Eric, so we properly ignore that for PF_IO_WORKER threads. - Disallow sending signals to PF_IO_WORKER threads in general, we're not interested in having them funnel back to the io_uring owning task. - Stable fix from Stefan, ensuring we properly break links for short send/sendmsg recv/recvmsg if MSG_WAITALL is set. - Catch and loop when needing to run task_work before a PF_IO_WORKER threads goes to sleep. * tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-block: io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with MSG_WAITALL io-wq: ensure task is running before processing task_work signal: don't allow STOP on PF_IO_WORKER threads signal: don't allow sending any signals to PF_IO_WORKER threads
2021-03-21Merge tag 'staging-5.12-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Some small staging and IIO driver fixes: - MAINTAINERS changes for the move of the staging mailing list - comedi driver fixes to get request_irq() to work correctly - counter driver fixes for reported issues with iio devices - tiny iio driver fixes for reported issues. All of these have been in linux-next with no reported problems" * tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vt665x: fix alignment constraints staging: comedi: cb_pcidas64: fix request_irq() warn staging: comedi: cb_pcidas: fix request_irq() warn MAINTAINERS: move the staging subsystem to lists.linux.dev MAINTAINERS: move some real subsystems off of the staging mailing list iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler iio: hid-sensor-temperature: Fix issues of timestamp channel iio: hid-sensor-humidity: Fix alignment issue of timestamp channel counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register counter: stm32-timer-cnt: fix ceiling write max value counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED iio: adc: ab8500-gpadc: Fix off by 10 to 3 iio:adc:stm32-adc: Add HAS_IOMEM dependency iio: adis16400: Fix an error code in adis16400_initial_setup() iio: adc: adi-axi-adc: add proper Kconfig dependencies iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask iio: hid-sensor-prox: Fix scale not correct issue iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
2021-03-21Merge tag 'usb-5.12-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt driver fixes from Greg KH: "Here are some small Thunderbolt and USB driver fixes for some reported issues: - thunderbolt fixes for minor problems - typec fixes for power issues - usb-storage quirk addition - usbip bugfix - dwc3 bugfix when stopping transfers - cdnsp bugfix for isoc transfers - gadget use-after-free fix All have been in linux-next this week with no reported issues" * tag 'usb-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: tcpm: Skip sink_cap query only when VDM sm is busy usb: dwc3: gadget: Prevent EP queuing while stopping transfers usb: typec: tcpm: Invoke power_supply_changed for tcpm-source-psy- usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct usb-storage: Add quirk to defeat Kindle's automatic unload usb: gadget: configfs: Fix KASAN use-after-free usbip: Fix incorrect double assignment to udc->ud.tcp_rx usb: cdnsp: Fixes incorrect value in ISOC TRB thunderbolt: Increase runtime PM reference count on DP tunnel discovery thunderbolt: Initialize HopID IDAs in tb_switch_alloc()
2021-03-21Merge tag 'irq-urgent-2021-03-21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "A change to robustify force-threaded IRQ handlers to always disable interrupts, plus a DocBook fix. The force-threaded IRQ handler change has been accelerated from the normal schedule of such a change to keep the bad pattern/workaround of spin_lock_irqsave() in handlers or IRQF_NOTHREAD as a kludge from spreading" * tag 'irq-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Disable interrupts for force threaded handlers genirq/irq_sim: Fix typos in kernel doc (fnode -> fwnode)
2021-03-21Merge tag 'perf-urgent-2021-03-21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Boundary condition fixes for bugs unearthed by the perf fuzzer" * tag 'perf-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix unchecked MSR access error caused by VLBR_EVENT perf/x86/intel: Fix a crash caused by zero PEBS status
2021-03-21Merge tag 'locking-urgent-2021-03-21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: - Get static calls & modules right. Hopefully. - WW mutex fixes * tag 'locking-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: static_call: Fix static_call_update() sanity check static_call: Align static_call_is_init() patching condition static_call: Fix static_call_set_init() locking/ww_mutex: Fix acquire/release imbalance in ww_acquire_init()/ww_acquire_fini() locking/ww_mutex: Simplify use_ww_ctx & ww_ctx handling
2021-03-21Merge tag 'efi-urgent-2021-03-21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: - another missing RT_PROP table related fix, to ensure that the efivarfs pseudo filesystem fails gracefully if variable services are unsupported - use the correct alignment for literal EFI GUIDs - fix a use after unmap issue in the memreserve code * tag 'efi-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: use 32-bit alignment for efi_guid_t literals firmware/efi: Fix a use after bug in efi_mem_reserve_persistent efivars: respect EFI_UNSUPPORTED return from firmware
2021-03-21Merge tag 'x86_urgent_for_v5.12-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "The freshest pile of shiny x86 fixes for 5.12: - Add the arch-specific mapping between physical and logical CPUs to fix devicetree-node lookups - Restore the IRQ2 ignore logic - Fix get_nr_restart_syscall() to return the correct restart syscall number. Split in a 4-patches set to avoid kABI breakage when backporting to dead kernels" * tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic/of: Fix CPU devicetree-node lookups x86/ioapic: Ignore IRQ2 again x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTART x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall() x86: Move TS_COMPAT back to asm/thread_info.h kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()
2021-03-21Merge tag 'powerpc-5.12-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a possible stack corruption and subsequent DLPAR failure in the rpadlpar_io PCI hotplug driver - Two build fixes for uncommon configurations Thanks to Christophe Leroy and Tyrel Datwyler. * tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: PCI: rpadlpar: Fix potential drc_name corruption in store functions powerpc: Force inlining of cpu_has_feature() to avoid build failure powerpc/vdso32: Add missing _restgpr_31_x to fix build failure
2021-03-21io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with ↵Stefan Metzmacher
MSG_WAITALL Without that it's not safe to use them in a linked combination with others. Now combinations like IORING_OP_SENDMSG followed by IORING_OP_SPLICE should be possible. We already handle short reads and writes for the following opcodes: - IORING_OP_READV - IORING_OP_READ_FIXED - IORING_OP_READ - IORING_OP_WRITEV - IORING_OP_WRITE_FIXED - IORING_OP_WRITE - IORING_OP_SPLICE - IORING_OP_TEE Now we have it for these as well: - IORING_OP_SENDMSG - IORING_OP_SEND - IORING_OP_RECVMSG - IORING_OP_RECV For IORING_OP_RECVMSG we also check for the MSG_TRUNC and MSG_CTRUNC flags in order to call req_set_fail_links(). There might be applications arround depending on the behavior that even short send[msg]()/recv[msg]() retuns continue an IOSQE_IO_LINK chain. It's very unlikely that such applications pass in MSG_WAITALL, which is only defined in 'man 2 recvmsg', but not in 'man 2 sendmsg'. It's expected that the low level sock_sendmsg() call just ignores MSG_WAITALL, as MSG_ZEROCOPY is also ignored without explicitly set SO_ZEROCOPY. We also expect the caller to know about the implicit truncation to MAX_RW_COUNT, which we don't detect. cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/c4e1a4cc0d905314f4d5dc567e65a7b09621aab3.1615908477.git.metze@samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-21io-wq: ensure task is running before processing task_workJens Axboe
Mark the current task as running if we need to run task_work from the io-wq threads as part of work handling. If that is the case, then return as such so that the caller can appropriately loop back and reset if it was part of a going-to-sleep flush. Fixes: 3bfe6106693b ("io-wq: fork worker threads from original task") Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 05:31:52 +0000