| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor fix from John Johansen:
"A fix for an issue syzbot discovered last week:
- Fix for bad debug check when converting secids to secctx"
* tag 'apparmor-pr-2018-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: fix bad debug check in apparmor_secid_to_secctx()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This fixes two annoying bugs:
- The first one is a side effect caused by using SRCU for rcuidle
tracepoints. It seems that the perf was depending on the rcuidle
tracepoints to make RCU watch when it wasn't.
The real fix will be to have perf use SRCU instead of depending on
RCU watching, but that can't be done until SRCU is safe to use in
NMI context (Paul's working on that).
- The second bug fix is for a bug that's been periodically making my
tests fail randomly for some time. I haven't had time to track it
down, but finally have. It has to do with stressing NMIs (via perf)
while enabling or disabling ftrace function handling with lockdep
enabled.
If an interrupt happens and just as it returns, it sets lockdep
back to "interrupts enabled" but before it returns an NMI is
triggered, and if this happens while printk_nmi_enter has a
breakpoint attached to it (because ftrace is converting it to or
from nop to call fentry), the breakpoint trap also calls into
lockdep, and since returning from the NMI to a interrupt handler,
interrupts were disabled when the NMI went off, lockdep keeps its
state as interrupts disabled when it returns back from the
interrupt handler where interrupts are enabled.
This causes lockdep_assert_irqs_enabled() to trigger a false
positive"
* tag 'trace-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
printk/tracing: Do not trace printk_nmi_enter()
tracing: Add back in rcu_irq_enter/exit_irqson() for rcuidle tracepoints
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix for improper fsync after hardlink
- fix for a corruption during file deduplication
- use after free fixes
- RCU warning fix
- fix for buffered write to nodatacow file
* tag 'for-4.19-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Fix suspicious RCU usage warning in btrfs_debug_in_rcu
btrfs: use after free in btrfs_quota_enable
btrfs: btrfs_shrink_device should call commit transaction at the end
btrfs: fix qgroup_free wrong num_bytes in btrfs_subvolume_reserve_metadata
Btrfs: fix data corruption when deduplicating between different files
Btrfs: sync log after logging new name
Btrfs: fix unexpected failure of nocow buffered writes after snapshotting when low on space
|
|
I hit the following splat in my tests:
------------[ cut here ]------------
IRQs not enabled as expected
WARNING: CPU: 3 PID: 0 at kernel/time/tick-sched.c:982 tick_nohz_idle_enter+0x44/0x8c
Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6table_filter ip6_tables ipv6
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.19.0-rc2-test+ #2
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
EIP: tick_nohz_idle_enter+0x44/0x8c
Code: ec 05 00 00 00 75 26 83 b8 c0 05 00 00 00 75 1d 80 3d d0 36 3e c1 00
75 14 68 94 63 12 c1 c6 05 d0 36 3e c1 01 e8 04 ee f8 ff <0f> 0b 58 fa bb a0
e5 66 c1 e8 25 0f 04 00 64 03 1d 28 31 52 c1 8b
EAX: 0000001c EBX: f26e7f8c ECX: 00000006 EDX: 00000007
ESI: f26dd1c0 EDI: 00000000 EBP: f26e7f40 ESP: f26e7f38
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010296
CR0: 80050033 CR2: 0813c6b0 CR3: 2f342000 CR4: 001406f0
Call Trace:
do_idle+0x33/0x202
cpu_startup_entry+0x61/0x63
start_secondary+0x18e/0x1ed
startup_32_smp+0x164/0x168
irq event stamp: 18773830
hardirqs last enabled at (18773829): [<c040150c>] trace_hardirqs_on_thunk+0xc/0x10
hardirqs last disabled at (18773830): [<c040151c>] trace_hardirqs_off_thunk+0xc/0x10
softirqs last enabled at (18773824): [<c0ddaa6f>] __do_softirq+0x25f/0x2bf
softirqs last disabled at (18773767): [<c0416bbe>] call_on_stack+0x45/0x4b
---[ end trace b7c64aa79e17954a ]---
After a bit of debugging, I found what was happening. This would trigger
when performing "perf" with a high NMI interrupt rate, while enabling and
disabling function tracer. Ftrace uses breakpoints to convert the nops at
the start of functions to calls to the function trampolines. The breakpoint
traps disable interrupts and this makes calls into lockdep via the
trace_hardirqs_off_thunk in the entry.S code. What happens is the following:
do_idle {
[interrupts enabled]
<interrupt> [interrupts disabled]
TRACE_IRQS_OFF [lockdep says irqs off]
[...]
TRACE_IRQS_IRET
test if pt_regs say return to interrupts enabled [yes]
TRACE_IRQS_ON [lockdep says irqs are on]
<nmi>
nmi_enter() {
printk_nmi_enter() [traced by ftrace]
[ hit ftrace breakpoint ]
<breakpoint exception>
TRACE_IRQS_OFF [lockdep says irqs off]
[...]
TRACE_IRQS_IRET [return from breakpoint]
test if pt_regs say interrupts enabled [no]
[iret back to interrupt]
[iret back to code]
tick_nohz_idle_enter() {
lockdep_assert_irqs_enabled() [lockdep say no!]
Although interrupts are indeed enabled, lockdep thinks it is not, and since
we now do asserts via lockdep, it gives a false warning. The issue here is
that printk_nmi_enter() is called before lockdep_off(), which disables
lockdep (for this reason) in NMIs. By simply not allowing ftrace to see
printk_nmi_enter() (via notrace annotation) we keep lockdep from getting
confused.
Cc: stable@vger.kernel.org
Fixes: 42a0bb3f71383 ("printk/nmi: generic solution for safe printk in NMI")
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If parent_get class method is not supported by the OSDs, fall back to
the legacy class method and assume that the parent is in the default
(i.e. "") namespace. The "use the child's image namespace" workaround
is no longer needed because creating images within namespaces will
require parent_get aware OSDs.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
In preparation for the new parent_get and parent_overlap_get class
methods, factor out the fetching and decoding of parent data.
As a side effect, we now decode all four fields in the "no parent"
case.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
syzbot reported a use-after-free in ceph_destroy_options(), called from
ceph_mount(). The problem was that create_fs_client() consumed the opt
pointer on some errors, but not on all of them. Make sure it always
consumes both libceph and ceph options.
Reported-by: syzbot+8ab6f1042021b4eed062@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
|
|
When a teardown callback fails, the CPU hotplug code brings the CPU back to
the previous state. The previous state becomes the new target state. The
rollback happens in undo_cpu_down() which increments the state
unconditionally even if the state is already the same as the target.
As a consequence the next CPU hotplug operation will start at the wrong
state. This is easily to observe when __cpu_disable() fails.
Prevent the unconditional undo by checking the state vs. target before
incrementing state and fix up the consequently wrong conditional in the
unplug code which handles the failure of the final CPU take down on the
control CPU side.
Fixes: 4dddfb5faa61 ("smp/hotplug: Rewrite AP state machine core")
Reported-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: josh@joshtriplett.org
Cc: peterz@infradead.org
Cc: jiangshanlai@gmail.com
Cc: dzickus@redhat.com
Cc: brendan.jackman@arm.com
Cc: malat@debian.org
Cc: sramana@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1809051419580.1416@nanos.tec.linutronix.de
----
|
|
The smp_mb() in cpuhp_thread_fun() is misplaced. It needs to be after the
load of st->should_run to prevent reordering of the later load/stores
w.r.t. the load of st->should_run.
Fixes: 4dddfb5faa61 ("smp/hotplug: Rewrite AP state machine core")
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infraded.org>
Cc: josh@joshtriplett.org
Cc: peterz@infradead.org
Cc: jiangshanlai@gmail.com
Cc: dzickus@redhat.com
Cc: brendan.jackman@arm.com
Cc: malat@debian.org
Cc: mojha@codeaurora.org
Cc: sramana@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1536126727-11629-1-git-send-email-neeraju@codeaurora.org
|
|
When the kernel.print-fatal-signals sysctl has been enabled, a simple
userspace crash will cause the kernel to write a crash dump that contains,
among other things, the kernel gsbase into dmesg.
As suggested by Andy, limit output to pt_regs, FS_BASE and KERNEL_GS_BASE
in this case.
This also moves the bitness-specific logic from show_regs() into
process_{32,64}.c.
Fixes: 45807a1df9f5 ("vdso: print fatal signals")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180831194151.123586-1-jannh@google.com
|
|
Loops per jiffy is calculated by multiplying tsc_khz with 1e3 and then
dividing it by HZ.
Both tsc_khz and the temporary variable holding the multiplication result
are of type unsigned long, so on 32bit the result is truncated to the lower
32bit.
Use u64 as type for the temporary variable and cast tsc_khz to it before
multiplying.
[ tglx: Massaged changelog and removed pointless braces ]
Fixes: cf7a63ef4e02 ("x86/tsc: Calibrate tsc only once")
Signed-off-by: Chuanhua Lei <chuanhua.lei@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: yixin.zhu@linux.intel.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@microsoft.com>
Cc: Rajvi Jingar <rajvi.jingar@intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Link: https://lkml.kernel.org/r/1536228203-18701-1-git-send-email-chuanhua.lei@linux.intel.com
|
|
Commit 12864ff8545f (ACPI / LPSS: Avoid PM quirks on suspend and resume
from hibernation) bypasses lpss quirks for S3 and S4, by setting a flag
for S3/S4 in acpi_lpss_suspend(), and check that flag in
acpi_lpss_resume().
But this overlooks the boot case where acpi_lpss_resume() may get called
without a corresponding acpi_lpss_suspend() having been called.
Thus force setting the flag during boot.
Fixes: 12864ff8545f (ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200989
Reported-and-tested-by: William Lieurance <william.lieurance@namikoda.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: 4.15+ <stable@vger.kernel.org> # 4.15+: 12864ff8545f (ACPI / LPSS: Avoid ...)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Calling dmi_check_system() early only works on X86. Other
architectures initialize the DMI subsystem later so it's not
ready yet when ACPI itself gets initialized.
In the best case it results in a useless call to a function which
will do nothing. But depending on the dmi implementation, it could
also result in warnings. Best is to not call the function when it
can't work and isn't needed.
Additionally, if anyone ever needs to add non-x86 quirks, it would
surprisingly not work, so document the limitation to avoid confusion.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: cce4f632db20 (ACPI: fix early DSDT dmi check warnings on ia64)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It is possible to call fsync on a read-only handle (for example, fsck.ext2
does it when doing read-only check), and this call results in kernel
warning.
The patch b089cfd95d32 ("block: don't warn for flush on read-only device")
attempted to disable the warning, but it is buggy and it doesn't
(op_is_flush tests flags, but bio_op strips off the flags).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 721c7fc701c7 ("block: fail op_is_write() requests to read-only partitions")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The raspberrypi-hwmon driver doesn't automatically load, although it does work
when loaded, by adding the alias it auto loads as expected when built as a
module. Tested on RPi2/RPi3 on 32 bit kernel and RPi3B+ on aarch64 with
Fedora 28 and a patched 4.18 RC kernel.
Fixes: 3c493c885cf ("hwmon: Add support for RPi voltage sensor")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
CC: Stefan Wahren <stefan.wahren@i2se.com>
CC: Eric Anholt <eric@anholt.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes. The ACPI stuff is probably the most annoying for
users that get fixed this time.
- Atomic contexts, cansleep* calls and such fastpath/slopwpath
things.
- Defer ACPI event handler registration to late_initcall() so IRQs do
not fire in our face before other drivers have a chance to register
handlers.
- Race condition if a consumer requests a GPIO after
gpiochip_add_data_with_key() but before of_gpiochip_add()
- Probe errorpath in the dwapb driver"
* tag 'gpio-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Fix crash due to registration race
gpio: dwapb: Fix error handling in dwapb_gpio_probe()
gpiolib-acpi: Register GpioInt ACPI event handlers from a late_initcall
gpiolib: acpi: Switch to cansleep version of GPIO library call
gpio: adp5588: Fix sleep-in-atomic-context bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A set of very minor fixes and a couple of reverts to fix a major
problem (the attempt to change the busy count causes a hang when
attempting to change the drive cache type)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: aacraid: fix a signedness bug
Revert "scsi: core: avoid host-wide host_busy counter for scsi_mq"
Revert "scsi: core: fix scsi_host_queue_ready"
scsi: libata: Add missing newline at end of file
scsi: target: iscsi: cxgbit: use pr_debug() instead of pr_info()
scsi: hpsa: limit transfer length to 1MB, not 512kB
scsi: lpfc: Correct MDS diag and nvmet configuration
scsi: lpfc: Default fdmi_on to on
scsi: csiostor: fix incorrect port capabilities
scsi: csiostor: add a check for NULL pointer after kmalloc()
scsi: documentation: add scsi_mod.use_blk_mq to scsi-parameters
scsi: core: Update SCSI_MQ_DEFAULT help text to match default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux
Pull nds32 updates from Greentime Hu:
"Contained in here are the bug fixes, building error fixes and ftrace
support for nds32"
* tag 'nds32-for-linus-4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
nds32: linker script: GCOV kernel may refers data in __exit
nds32: fix build error because of wrong semicolon
nds32: Fix a kernel panic issue because of wrong frame pointer access.
nds32: Only print one page of stack when die to prevent printing too much information.
nds32: Add macro definition for offset of lp register on stack
nds32: Remove the deprecated ABI implementation
nds32/stack: Get real return address by using ftrace_graph_ret_addr
nds32/ftrace: Support dynamic function graph tracer
nds32/ftrace: Support dynamic function tracer
nds32/ftrace: Add RECORD_MCOUNT support
nds32/ftrace: Support static function graph tracer
nds32/ftrace: Support static function tracer
nds32: Extract the checking and getting pointer to a macro
nds32: Clean up the coding style
nds32: Fix get_user/put_user macro expand pointer problem
nds32: Fix empty call trace
nds32: add NULL entry to the end of_device_id array
nds32: fix logic for module
|
|
Borislav reported the following splat:
=============================
WARNING: suspicious RCU usage
4.19.0-rc1+ #1 Not tainted
-----------------------------
./include/linux/rcupdate.h:631 rcu_read_lock() used illegally while idle!
other info that might help us debug this:
RCU used illegally from idle CPU!
rcu_scheduler_active = 2, debug_locks = 1
RCU used illegally from extended quiescent state!
1 lock held by swapper/0/0:
#0: 000000004557ee0e (rcu_read_lock){....}, at: perf_event_output_forward+0x0/0x130
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0-rc1+ #1
Hardware name: LENOVO 2320CTO/2320CTO, BIOS G2ET86WW (2.06 ) 11/13/2012
Call Trace:
dump_stack+0x85/0xcb
perf_event_output_forward+0xf6/0x130
__perf_event_overflow+0x52/0xe0
perf_swevent_overflow+0x91/0xb0
perf_tp_event+0x11a/0x350
? find_held_lock+0x2d/0x90
? __lock_acquire+0x2ce/0x1350
? __lock_acquire+0x2ce/0x1350
? retint_kernel+0x2d/0x2d
? find_held_lock+0x2d/0x90
? tick_nohz_get_sleep_length+0x83/0xb0
? perf_trace_cpu+0xbb/0xd0
? perf_trace_buf_alloc+0x5a/0xa0
perf_trace_cpu+0xbb/0xd0
cpuidle_enter_state+0x185/0x340
do_idle+0x1eb/0x260
cpu_startup_entry+0x5f/0x70
start_kernel+0x49b/0x4a6
secondary_startup_64+0xa4/0xb0
This is due to the tracepoints moving to SRCU usage which does not require
RCU to be "watching". But perf uses these tracepoints with RCU and expects
it to be. Hence, we still need to add in the rcu_irq_enter/exit_irqson()
calls for "rcuidle" tracepoints. This is a temporary fix until we have SRCU
working in NMI context, and then perf can be converted to use that instead
of normal RCU.
Link: http://lkml.kernel.org/r/20180904162611.6a120068@gandalf.local.home
Cc: x86-ml <x86@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Fixes: e6753f23d961d ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
This patch is used to fix nds32 allmodconfig/allyesconfig build error
because GCOV kernel embeds counters in the kernel for each line
and a part of that embed in __exit text. So we need to keep the
EXIT_TEXT and EXIT_DATA if CONFIG_GCOV_KERNEL=y.
Link: https://lkml.org/lkml/2018/9/1/125
Signed-off-by: Greentime Hu <greentime@andestech.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
|
|
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
nilfs2: convert to SPDX license tags
drivers/dax/device.c: convert variable to vm_fault_t type
lib/Kconfig.debug: fix three typos in help text
checkpatch: add __ro_after_init to known $Attribute
mm: fix BUG_ON() in vmf_insert_pfn_pud() from VM_MIXEDMAP removal
uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name
memory_hotplug: fix kernel_panic on offline page processing
checkpatch: add optional static const to blank line declarations test
ipc/shm: properly return EIDRM in shm_lock()
mm/hugetlb: filter out hugetlb pages if HUGEPAGE migration is not supported.
mm/util.c: improve kvfree() kerneldoc
tools/vm/page-types.c: fix "defined but not used" warning
tools/vm/slabinfo.c: fix sign-compare warning
kmemleak: always register debugfs file
mm: respect arch_dup_mmap() return value
mm, oom: fix missing tlb_finish_mmu() in __oom_reap_task_mm().
mm: memcontrol: print proper OOM header when no eligible victim left
|
|
Remove the verbose license text from NILFS2 files and replace them with
SPDX tags. This does not change the license of any of the code.
Link: http://lkml.kernel.org/r/1535624528-5982-1-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As part of 226ab561075f ("device-dax: Convert to vmf_insert_mixed and
vm_fault_t") in 4.19-rc1, 'rc' was not converted to vm_fault_t. Now
converted.
Link: http://lkml.kernel.org/r/20180830153813.GA26059@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix three typos in CONFIG_WARN_ALL_UNSEEDED_RANDOM help text.
Link: http://lkml.kernel.org/r/20180830194505.4778-1-thibaut@sautereau.fr
Signed-off-by: Thibaut Sautereau <thibaut@sautereau.fr>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__ro_after_init is a specific __attribute__ that checkpatch does currently
not understand.
Add it to the known $Attribute types so that code that uses variables
declared with __ro_after_init are not thought to be a modifier type.
This appears as a defect in checkpatch output of code like:
static bool trust_cpu __ro_after_init = IS_ENABLED(CONFIG_RANDOM_TRUST_CPU);
[...]
if (trust_cpu && arch_init) {
where checkpatch reports:
ERROR: space prohibited after that '&&' (ctx:WxW)
if (trust_cpu && arch_init) {
Link: http://lkml.kernel.org/r/0fa8a2cb83ade4c525e18261ecf6cfede3015983.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It looks like I missed the PUD path when doing VM_MIXEDMAP removal.
This can be triggered by:
1. Boot with memmap=4G!8G
2. build ndctl with destructive flag on
3. make TESTS=device-dax check
[ +0.000675] kernel BUG at mm/huge_memory.c:824!
Applying the same change that was applied to vmf_insert_pfn_pmd() in the
original patch.
Link: http://lkml.kernel.org/r/153565957352.35524.1005746906902065126.stgit@djiang5-desk3.ch.intel.com
Fixes: e1fb4a08649 ("dax: remove VM_MIXEDMAP for fsdax and device dax")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since this header is in "include/uapi/linux/", apparently people want to
use it in userspace programs -- even in C++ ones. However, the header
uses a C++ reserved keyword ("private"), so change that to "dh_private"
instead to allow the header file to be used in C++ userspace.
Fixes https://bugzilla.kernel.org/show_bug.cgi?id=191051
Link: http://lkml.kernel.org/r/0db6c314-1ef4-9bfa-1baa-7214dd2ee061@infradead.org
Fixes: ddbb41148724 ("KEYS: Add KEYCTL_DH_COMPUTE command")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Within show_valid_zones() the function test_pages_in_a_zone() should be
called for online memory blocks only.
Otherwise it might lead to the VM_BUG_ON due to uninitialized struct
pages (when CONFIG_DEBUG_VM_PGFLAGS kernel option is set):
page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
------------[ cut here ]------------
Call Trace:
([<000000000038f91e>] test_pages_in_a_zone+0xe6/0x168)
[<0000000000923472>] show_valid_zones+0x5a/0x1a8
[<0000000000900284>] dev_attr_show+0x3c/0x78
[<000000000046f6f0>] sysfs_kf_seq_show+0xd0/0x150
[<00000000003ef662>] seq_read+0x212/0x4b8
[<00000000003bf202>] __vfs_read+0x3a/0x178
[<00000000003bf3ca>] vfs_read+0x8a/0x148
[<00000000003bfa3a>] ksys_read+0x62/0xb8
[<0000000000bc2220>] system_call+0xdc/0x2d8
That VM_BUG_ON was triggered by the page poisoning introduced in
mm/sparse.c with the git commit d0dc12e86b31 ("mm/memory_hotplug:
optimize memory hotplug").
With the same commit the new 'nid' field has been added to the struct
memory_block in order to store and later on derive the node id for
offline pages (instead of accessing struct page which might be
uninitialized). But one reference to nid in show_valid_zones() function
has been overlooked. Fixed with current commit. Also, nr_pages will
not be used any more after test_pages_in_a_zone() call, do not update
it.
Link: http://lkml.kernel.org/r/20180828090539.41491-1-zaslonko@linux.ibm.com
Fixes: d0dc12e86b31 ("mm/memory_hotplug: optimize memory hotplug")
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Using a static const struct definition as part of a series of
declarations produces a false positive "Missing a blank line after
declarations" for code like:
WARNING: Missing a blank line after declarations
#710: FILE: drivers/gpu/drm/tidss/tidss_scale_coefs.c:137:
+ int inc;
+ static const struct {
So fix it.
Link: http://lkml.kernel.org/r/5905126e70b0ed1781e49265fd5c49c5090d0223.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Jyri Sarha <jsarha@ti.com>
Cc: "Valkeinen, Tomi" <tomi.valkeinen@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When getting rid of the general ipc_lock(), this was missed furthermore,
making the comment around the ipc object validity check bogus. Under
EIDRM conditions, callers will in turn not see the error and continue
with the operation.
Link: http://lkml.kernel.org/r/20180824030920.GD3677@linux-r8p5
Link: http://lkml.kernel.org/r/20180823024051.GC13343@shao2-debian
Fixes: 82061c57ce9 ("ipc: drop ipc_lock()")
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When scanning for movable pages, filter out Hugetlb pages if hugepage
migration is not supported. Without this we hit infinte loop in
__offline_pages() where we do
pfn = scan_movable_pages(start_pfn, end_pfn);
if (pfn) { /* We have movable pages */
ret = do_migrate_range(pfn, end_pfn);
goto repeat;
}
Fix this by checking hugepage_migration_supported both in
has_unmovable_pages which is the primary backoff mechanism for page
offlining and for consistency reasons also into scan_movable_pages
because it doesn't make any sense to return a pfn to non-migrateable
huge page.
This issue was revealed by, but not caused by 72b39cfc4d75 ("mm,
memory_hotplug: do not fail offlining too early").
Link: http://lkml.kernel.org/r/20180824063314.21981-1-aneesh.kumar@linux.ibm.com
Fixes: 72b39cfc4d75 ("mm, memory_hotplug: do not fail offlining too early")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Haren Myneni <haren@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Scooped from an email from Matthew.
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
debugfs_known_mountpoints[] is not used any more, so let's remove it.
Link: http://lkml.kernel.org/r/1535102651-19418-1-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently we get the following compiler warning:
slabinfo.c:854:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (s->object_size < min_objsize)
^
due to the mismatch of signed/unsigned comparison. ->object_size and
->slab_size are never expected to be negative, so let's define them as
unsigned int.
[n-horiguchi@ah.jp.nec.com: convert everything - none of these can be negative]
Link: http://lkml.kernel.org/r/20180826234947.GA9787@hori1.linux.bs1.fc.nec.co.jp
Link: http://lkml.kernel.org/r/1535103134-20239-1-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If kmemleak built in to the kernel, but is disabled by default, the
debugfs file is never registered. Because of this, it is not possible
to find out if the kernel is built with kmemleak support by checking for
the presence of this file. To allow this, always register the file.
After this patch, if the file doesn't exist, kmemleak is not available
in the kernel. If writing "scan" or any other value than "clear" to
this file results in EBUSY, then kmemleak is available but is disabled
by default and can be activated via the kernel command line.
Catalin: "that's also consistent with a late disabling of kmemleak when
the debugfs entry sticks around."
Link: http://lkml.kernel.org/r/20180824131220.19176-1-vincent.whitchurch@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit d70f2a14b72a ("include/linux/sched/mm.h: uninline mmdrop_async(),
etc") ignored the return value of arch_dup_mmap(). As a result, on x86,
a failure to duplicate the LDT (e.g. due to memory allocation error)
would leave the duplicated memory mapping in an inconsistent state.
Fix by using the return value, as it was before the change.
Link: http://lkml.kernel.org/r/20180823051229.211856-1-namit@vmware.com
Fixes: d70f2a14b72a4 ("include/linux/sched/mm.h: uninline mmdrop_async(), etc")
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu
notifiers") has added an ability to skip over vmas with blockable mmu
notifiers. This however didn't call tlb_finish_mmu as it should.
As a result inc_tlb_flush_pending has been called without its pairing
dec_tlb_flush_pending and all callers mm_tlb_flush_pending would flush
even though this is not really needed. This alone is not harmful and it
seems there shouldn't be any such callers for oom victims at all but
there is no real reason to skip tlb_finish_mmu on early skip either so
call it.
[mhocko@suse.com: new changelog]
Link: http://lkml.kernel.org/r/b752d1d5-81ad-7a35-2394-7870641be51c@i-love.sakura.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When the memcg OOM killer runs out of killable tasks, it currently
prints a WARN with no further OOM context. This has caused some user
confusion.
Warnings indicate a kernel problem. In a reported case, however, the
situation was triggered by a nonsensical memcg configuration (hard limit
set to 0). But without any VM context this wasn't obvious from the
report, and it took some back and forth on the mailing list to identify
what is actually a trivial issue.
Handle this OOM condition like we handle it in the global OOM killer:
dump the full OOM context and tell the user we ran out of tasks.
This way the user can identify misconfigurations easily by themselves
and rectify the problem - without having to go through the hassle of
running into an obscure but unsettling warning, finding the appropriate
kernel mailing list and waiting for a kernel developer to remote-analyze
that the memcg configuration caused this.
If users cannot make sense of why the OOM killer was triggered or why it
failed, they will still report it to the mailing list, we know that from
experience. So in case there is an actual kernel bug causing this,
kernel developers will very likely hear about it.
Link: http://lkml.kernel.org/r/20180821160406.22578-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__GFP_HIGHMEM flag is cleared by upper layer functions
(in include/linux/dma-mapping.h) so we'll never get a
__GFP_HIGHMEM flag in arch_dma_alloc gfp argument.
That's why alloc_pages will never return highmem page
here.
Get rid of highmem pages handling and cleanup arch_dma_alloc
and arch_dma_free functions.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
So far the IOC treatment was global on ARC, being turned on (or off)
for all devices in the system. With this patch, this can now be done
per device using the "dma-coherent" DT property; IOW with this patch
we can use both HW-coherent and regular DMA peripherals simultaneously.
The changes involved are too many so enlisting the summary below:
1. common code calls ARC arch_setup_dma_ops() per device.
2. For coherent dma (IOC) it plugs in generic @dma_direct_ops which
doesn't need any arch specific backend: No need for any explicit
cache flushes or MMU mappings to provide for uncached access
- dma_(map|sync)_single* return early as corresponding dma ops callbacks
are NULL in generic code.
So arch_sync_dma_*() -> dma_cache_*() need not handle the coherent
dma case, hence drop ARC __dma_cache_*_ioc() which were no-op anyways
3. For noncoherent dma (non IOC) generic @dma_noncoherent_ops is used
which in turns calls ARC specific routines
- arch_dma_alloc() no longer checks for @ioc_enable since this is
called only for !IOC case.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: rewrote changelog]
|
|
Pull networking fixes from David Miller:
1) Must perform TXQ teardown before unregistering interfaces in
mac80211, from Toke Høiland-Jørgensen.
2) Don't allow creating mac80211_hwsim with less than one channel, from
Johannes Berg.
3) Division by zero in cfg80211, fix from Johannes Berg.
4) Fix endian issue in tipc, from Haiqing Bai.
5) BPF sockmap use-after-free fixes from Daniel Borkmann.
6) Spectre-v1 in mac80211_hwsim, from Jinbum Park.
7) Missing rhashtable_walk_exit() in tipc, from Cong Wang.
8) Revert kvzalloc() conversion of AF_PACKET, it breaks mmap() when
kvzalloc() tries to use kmalloc() pages. From Eric Dumazet.
9) Fix deadlock in hv_netvsc, from Dexuan Cui.
10) Do not restart timewait timer on RST, from Florian Westphal.
11) Fix double lwstate refcount grab in ipv6, from Alexey Kodanev.
12) Unsolicit report count handling is off-by-one, fix from Hangbin Liu.
13) Sleep-in-atomic in cadence driver, from Jia-Ju Bai.
14) Respect ttl-inherit in ip6 tunnel driver, from Hangbin Liu.
15) Use-after-free in act_ife, fix from Cong Wang.
16) Missing hold to meta module in act_ife, from Vlad Buslov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits)
net: phy: sfp: Handle unimplemented hwmon limits and alarms
net: sched: action_ife: take reference to meta module
act_ife: fix a potential use-after-free
net/mlx5: Fix SQ offset in QPs with small RQ
tipc: correct spelling errors for tipc_topsrv_queue_evt() comments
tipc: correct spelling errors for struct tipc_bc_base's comment
bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA.
bnxt_en: Clean up unused functions.
bnxt_en: Fix firmware signaled resource change logic in open.
sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabel
sctp: fix invalid reference to the index variable of the iterator
net/ibm/emac: wrong emac_calc_base call was used by typo
net: sched: null actions array pointer before releasing action
vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definition
r8169: add support for NCube 8168 network card
ip6_tunnel: respect ttl inherit for ip6tnl
mac80211: shorten the IBSS debug messages
mac80211: don't Tx a deauth frame if the AP forbade Tx
mac80211: Fix station bandwidth setting after channel switch
mac80211: fix a race between restart and CSA flows
...
|
|
Not all SFPs implement the registers containing sensor limits and
alarms. Luckily, there is a bit indicating if they are implemented or
not. Add checking for this bit, when deciding if the hwmon attributes
should be visible.
Fixes: 1323061a018a ("net: phy: sfp: Add HWMON support for module sensors")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent refactoring of add_metainfo() caused use_all_metadata() to add
metainfo to ife action metalist without taking reference to module. This
causes warning in module_put called from ife action cleanup function.
Implement add_metainfo_and_get_ops() function that returns with reference
to module taken if metainfo was added successfully, and call it from
use_all_metadata(), instead of calling __add_metainfo() directly.
Example warning:
[ 646.344393] WARNING: CPU: 1 PID: 2278 at kernel/module.c:1139 module_put+0x1cb/0x230
[ 646.352437] Modules linked in: act_meta_skbtcindex act_meta_mark act_meta_skbprio act_ife ife veth nfsv3 nfs fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c tun ebtable_filter ebtables ip6table_filter ip6_tables bridge stp llc mlx5_ib ib_uverbs ib_core intel_rapl sb_edac x86_pkg_temp_thermal mlx5_core coretemp kvm_intel kvm nfsd igb irqbypass crct10dif_pclmul devlink crc32_pclmul mei_me joydev ses crc32c_intel enclosure auth_rpcgss i2c_algo_bit ioatdma ptp mei pps_core ghash_clmulni_intel iTCO_wdt iTCO_vendor_support pcspkr dca ipmi_ssif lpc_ich target_core_mod i2c_i801 ipmi_si ipmi_devintf pcc_cpufreq wmi ipmi_msghandler nfs_acl lockd acpi_pad acpi_power_meter grace sunrpc mpt3sas raid_class scsi_transport_sas
[ 646.425631] CPU: 1 PID: 2278 Comm: tc Not tainted 4.19.0-rc1+ #799
[ 646.432187] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 646.440595] RIP: 0010:module_put+0x1cb/0x230
[ 646.445238] Code: f3 66 94 02 e8 26 ff fa ff 85 c0 74 11 0f b6 1d 51 30 94 02 80 fb 01 77 60 83 e3 01 74 13 65 ff 0d 3a 83 db 73 e9 2b ff ff ff <0f> 0b e9 00 ff ff ff e8 59 01 fb ff 85 c0 75 e4 48 c7 c2 20 62 6b
[ 646.464997] RSP: 0018:ffff880354d37068 EFLAGS: 00010286
[ 646.470599] RAX: 0000000000000000 RBX: ffffffffc0a52518 RCX: ffffffff8c2668db
[ 646.478118] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffc0a52518
[ 646.485641] RBP: ffffffffc0a52180 R08: fffffbfff814a4a4 R09: fffffbfff814a4a3
[ 646.493164] R10: ffffffffc0a5251b R11: fffffbfff814a4a4 R12: 1ffff1006a9a6e0d
[ 646.500687] R13: 00000000ffffffff R14: ffff880362bab890 R15: dead000000000100
[ 646.508213] FS: 00007f4164c99800(0000) GS:ffff88036fe40000(0000) knlGS:0000000000000000
[ 646.516961] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 646.523080] CR2: 00007f41638b8420 CR3: 0000000351df0004 CR4: 00000000001606e0
[ 646.530595] Call Trace:
[ 646.533408] ? find_symbol_in_section+0x260/0x260
[ 646.538509] tcf_ife_cleanup+0x11b/0x200 [act_ife]
[ 646.543695] tcf_action_cleanup+0x29/0xa0
[ 646.548078] __tcf_action_put+0x5a/0xb0
[ 646.552289] ? nla_put+0x65/0xe0
[ 646.555889] __tcf_idr_release+0x48/0x60
[ 646.560187] tcf_generic_walker+0x448/0x6b0
[ 646.564764] ? tcf_action_dump_1+0x450/0x450
[ 646.569411] ? __lock_is_held+0x84/0x110
[ 646.573720] ? tcf_ife_walker+0x10c/0x20f [act_ife]
[ 646.578982] tca_action_gd+0x972/0xc40
[ 646.583129] ? tca_get_fill.constprop.17+0x250/0x250
[ 646.588471] ? mark_lock+0xcf/0x980
[ 646.592324] ? check_chain_key+0x140/0x1f0
[ 646.596832] ? debug_show_all_locks+0x240/0x240
[ 646.601839] ? memset+0x1f/0x40
[ 646.605350] ? nla_parse+0xca/0x1a0
[ 646.609217] tc_ctl_action+0x215/0x230
[ 646.613339] ? tcf_action_add+0x220/0x220
[ 646.617748] rtnetlink_rcv_msg+0x56a/0x6d0
[ 646.622227] ? rtnl_fdb_del+0x3f0/0x3f0
[ 646.626466] netlink_rcv_skb+0x18d/0x200
[ 646.630752] ? rtnl_fdb_del+0x3f0/0x3f0
[ 646.634959] ? netlink_ack+0x500/0x500
[ 646.639106] netlink_unicast+0x2d0/0x370
[ 646.643409] ? netlink_attachskb+0x340/0x340
[ 646.648050] ? _copy_from_iter_full+0xe9/0x3e0
[ 646.652870] ? import_iovec+0x11e/0x1c0
[ 646.657083] netlink_sendmsg+0x3b9/0x6a0
[ 646.661388] ? netlink_unicast+0x370/0x370
[ 646.665877] ? netlink_unicast+0x370/0x370
[ 646.670351] sock_sendmsg+0x6b/0x80
[ 646.674212] ___sys_sendmsg+0x4a1/0x520
[ 646.678443] ? copy_msghdr_from_user+0x210/0x210
[ 646.683463] ? lock_downgrade+0x320/0x320
[ 646.687849] ? debug_show_all_locks+0x240/0x240
[ 646.692760] ? do_raw_spin_unlock+0xa2/0x130
[ 646.697418] ? _raw_spin_unlock+0x24/0x30
[ 646.701798] ? __handle_mm_fault+0x1819/0x1c10
[ 646.706619] ? __pmd_alloc+0x320/0x320
[ 646.710738] ? debug_show_all_locks+0x240/0x240
[ 646.715649] ? restore_nameidata+0x7b/0xa0
[ 646.720117] ? check_chain_key+0x140/0x1f0
[ 646.724590] ? check_chain_key+0x140/0x1f0
[ 646.729070] ? __fget_light+0xbc/0xd0
[ 646.733121] ? __sys_sendmsg+0xd7/0x150
[ 646.737329] __sys_sendmsg+0xd7/0x150
[ 646.741359] ? __ia32_sys_shutdown+0x30/0x30
[ 646.746003] ? up_read+0x53/0x90
[ 646.749601] ? __do_page_fault+0x484/0x780
[ 646.754105] ? do_syscall_64+0x1e/0x2c0
[ 646.758320] do_syscall_64+0x72/0x2c0
[ 646.762353] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 646.767776] RIP: 0033:0x7f4163872150
[ 646.771713] Code: 8b 15 3c 7d 2b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 83 3d b9 d5 2b 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be cd 00 00 48 89 04 24
[ 646.791474] RSP: 002b:00007ffdef7d6b58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 646.799721] RAX: ffffffffffffffda RBX: 0000000000000024 RCX: 00007f4163872150
[ 646.807240] RDX: 0000000000000000 RSI: 00007ffdef7d6bd0 RDI: 0000000000000003
[ 646.814760] RBP: 000000005b8b9482 R08: 0000000000000001 R09: 0000000000000000
[ 646.822286] R10: 00000000000005e7 R11: 0000000000000246 R12: 00007ffdef7dad20
[ 646.829807] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000679bc0
[ 646.837360] irq event stamp: 6083
[ 646.841043] hardirqs last enabled at (6081): [<ffffffff8c220a7d>] __call_rcu+0x17d/0x500
[ 646.849882] hardirqs last disabled at (6083): [<ffffffff8c004f06>] trace_hardirqs_off_thunk+0x1a/0x1c
[ 646.859775] softirqs last enabled at (5968): [<ffffffff8d4004a1>] __do_softirq+0x4a1/0x6ee
[ 646.868784] softirqs last disabled at (6082): [<ffffffffc0a78759>] tcf_ife_cleanup+0x39/0x200 [act_ife]
[ 646.878845] ---[ end trace b1b8c12ffe51e657 ]---
Fixes: 5ffe57da29b3 ("act_ife: fix a potential deadlock")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Immediately after module_put(), user could delete this
module, so e->ops could be already freed before we call
e->ops->release().
Fix this by moving module_put() after ops->release().
Fixes: ef6980b6becb ("introduce IFE action")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Correct the formula for calculating the RQ page remainder,
which should be in byte granularity. The result will be
non-zero only for RQs smaller than PAGE_SIZE, as an RQ size
is a power of 2.
Divide this by the SQ stride (MLX5_SEND_WQE_BB) to get the
SQ offset in strides granularity.
Fixes: d7037ad73daa ("net/mlx5: Fix QP fragmented buffer allocation")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
PPC KVM fixes for 4.19
Two small fixes for KVM on POWER machines; one fixes a bug where pages
might not get marked dirty, causing guest memory corruption on migration,
and the other fixes a bug causing reads from guest memory to use the
wrong guest real address for very large HPT guests (>256G of memory),
leading to failures in instruction emulation.
|
|
syzbot reports a divide-by-zero off the NBD_SET_BLKSIZE ioctl.
We need proper validation of the input here. Not just if it's
zero, but also if the value is a power-of-2 and in a valid
range. Add that.
Cc: stable@vger.kernel.org
Reported-by: syzbot <syzbot+25dbecbec1e62c6b0dd4@syzkaller.appspotmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
DNV's iTCO is slightly different with SMBCTRL sitting at a different
offset when compared to all other devices. Let's fix so that we can
properly use iTCO watchdog.
Fixes: 84d7f2ebd70d ("i2c: i801: Add support for Intel DNV")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
We have to do down_write on the mm semaphore to set a bitfield in the
mm context.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: a4499382 ("KVM: s390: Add huge page enablement control")
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
