summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-02x86_32: apic/summit_32, fix section mismatchJiri Slaby
Remove __init section placement for some functions/data, so that we don't get section mismatch warnings. Also make inline function instead of empty setup_summit macro. [v2] One of them was not caught by DEBUG_SECTION_MISMATCH=y magic. Fix it. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com>
2009-03-02x86_32: apic/es7000_32, fix section mismatchJiri Slaby
Remove __init section placement for some functions, so that we don't get section mismatch warnings. [v2]: 2 of them were not caught by DEBUG_SECTION_MISMATCH=y magic. Fix it. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com>
2009-03-02x86_32: apic/summit_32, fix cpu_mask_to_apicidJiri Slaby
Perform same-cluster checking even for masks with all (nr_cpu_ids) bits set and report correct apicid on success instead. While at it, convert it to for_each_cpu and newer cpumask api. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-02x86_32: apic/es7000_32, fix cpu_mask_to_apicidJiri Slaby
Perform same-cluster checking even for masks with all (nr_cpu_ids) bits set and report BAD_APICID on failure. While at it, convert it to for_each_cpu. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-02x86_32: apic/es7000_32, cpu_mask_to_apicid cleanupJiri Slaby
Remove es7000_cpu_mask_to_apicid_cluster completely, because it's almost the same as es7000_cpu_mask_to_apicid except 2 code paths. One of them is about to be removed soon, the another should be BAD_APICID (it's a fail path). The _cluster one was not invoked on apic->cpu_mask_to_apicid_and anyway, since there was no _cluster_and variant. Also use newer cpumask functions. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-02x86_32: apic/bigsmp_32, de-inline functionsJiri Slaby
The ones which go only into struct apic are de-inlined by compiler anyway, so remove the inline specifier from them. Afterwards, remove bigsmp_setup_portio_remap completely as it is unused. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26x86: fix !ACPI build for es7000_32.cIngo Molnar
arch/x86/kernel/apic/es7000_32.c:702: error: 'es7000_acpi_madt_oem_check_cluster' undeclared here (not in a function) Provide a es7000_acpi_madt_oem_check_cluster() definition in the !ACPI case too. Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26x86: apic: simplify secondary CPU wakeup methods, fixIngo Molnar
Impact: build fix init_deasserted is only available on SMP. Make the secondary-wakeup function conditional on SMP. Also clean up the file some. Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26x86: apic: simplify secondary CPU wakeup methodsIngo Molnar
Impact: cleanup - rename apic->wakeup_cpu to apic->wakeup_secondary_cpu, to make it apparent that this is an SMP-only method - handle NULL ->wakeup_secondary_cpus to mean the default INIT wakeup sequence - this allows simplification of the APIC driver templates. Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26x86: remove update_apic from x86_quirks, fixIngo Molnar
Impact: build fix wakeup_secondary_cpu_via_init(), the default platform method for booting a secondary CPU, is always used on UP due to probe_32.c, if CONFIG_X86_LOCAL_APIC is enabled but SMP is off. So provide a UP wrapper inline as well. Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26x86: don't compile vsmp_64 for 32bitYinghai Lu
Impact: cleanup that is only needed when CONFIG_X86_VSMP is defined with 64bit also remove dead code about PCI, because CONFIG_X86_VSMP depends on PCI Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26x86: remove update_apic from x86_quirksYinghai Lu
Impact: cleanup x86_quirks->update_apic() calling looks crazy. so try to remove it: 1. every apic take wakeup_cpu member directly 2. separate es7000_apic to es7000_apic_cluster 3. use uv_wakeup_cpu directly Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26Merge branches 'x86/apic', 'x86/defconfig', 'x86/memtest', 'x86/mm' and ↵Ingo Molnar
'linus' into x86/core
2009-02-26Merge branches 'x86/urgent' and 'x86/pat' into x86/coreIngo Molnar
Conflicts: arch/x86/include/asm/pat.h
2009-02-26Merge branch 'x86/urgent' into x86/coreIngo Molnar
Conflicts: arch/x86/mach-voyager/voyager_smp.c
2009-02-26gpu/drm, x86, PAT: PAT support for io_mapping_*, export symbols for modulesIngo Molnar
Impact: build fix ERROR: "reserve_io_memtype_wc" [drivers/gpu/drm/i915/i915.ko] undefined! ERROR: "free_io_memtype" [drivers/gpu/drm/i915/i915.ko] undefined! Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25xen: disable interrupts early, as start_kernel expectsJeremy Fitzhardinge
This avoids a lockdep warning from: if (DEBUG_LOCKS_WARN_ON(unlikely(!early_boot_irqs_enabled))) return; in trace_hardirqs_on_caller(); Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Mark McLoughlin <markmc@redhat.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25Merge branch 'x86/urgent' into x86/patIngo Molnar
2009-02-25x86: make vmap yell louder when it is used under irqs_disabled()Peter Zijlstra
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25gpu/drm, x86, PAT: PAT support for io_mapping_*Venkatesh Pallipadi
Make io_mapping_create_wc and io_mapping_free go through PAT to make sure that there are no memory type aliases. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Eric Anholt <eric@anholt.net> Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25gpu/drm, x86, PAT: io_mapping_create_wc and resource_size_tVenkatesh Pallipadi
io_mapping_create_wc should take a resource_size_t parameter in place of unsigned long. With unsigned long, there will be no way to map greater than 4GB address in i386/32 bit. On x86, greater than 4GB addresses cannot be mapped on i386 without PAE. Return error for such a case. Patch also adds a structure for io_mapping, that saves the base, size and type on HAVE_ATOMIC_IOMAP archs, that can be used to verify the offset on io_mapping_map calls. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Eric Anholt <eric@anholt.net> Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25gpu/drm, x86, PAT: routine to keep identity map in syncVenkatesh Pallipadi
Add a function to check and keep identity maps in sync, when changing any memory type. One of the follow on patches will also use this routine. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Eric Anholt <eric@anholt.net> Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25gpu/drm, x86, PAT: Handle io_mapping_create_wc() errors in a clean wayVenkatesh Pallipadi
io_mapping_create_wc can return NULL on error and io_mapping_free() should be called on one of the error-cleanup path. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Eric Anholt <eric@anholt.net> Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25x86: memtest: add additional (regular) test patternsAndreas Herrmann
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25x86: update description for memtest boot parameterAndreas Herrmann
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25x86: memtest: wipe out test pattern from memoryAndreas Herrmann
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25x86: memtest: adapt log messagesAndreas Herrmann
- print test pattern instead of pattern number, - show pattern as stored in memory, - use proper priority flags, - consistent use of u64 throughout the code Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25x86: memtest: cleanup memtest functionAndreas Herrmann
Impact: code cleanup Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25x86: memtest: introduce array to select memtest patternsAndreas Herrmann
Impact: code cleanup Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25x86: memtest: reuse test patterns when memtest parameter exceeds number of ↵Andreas Herrmann
available patterns Impact: fix unexpected behaviour when pattern number is out of range Current implementation provides 4 patterns for memtest. The code doesn't check whether the memtest parameter value exceeds the maximum pattern number. Instead the memtest code pretends to test with non-existing patterns, e.g. when booting with memtest=10 I've observed the following ... early_memtest: pattern num 10 0000001000 - 0000006000 pattern 0 ... 0000001000 - 0000006000 pattern 1 ... 0000001000 - 0000006000 pattern 2 ... 0000001000 - 0000006000 pattern 3 ... 0000001000 - 0000006000 pattern 4 ... 0000001000 - 0000006000 pattern 5 ... 0000001000 - 0000006000 pattern 6 ... 0000001000 - 0000006000 pattern 7 ... 0000001000 - 0000006000 pattern 8 ... 0000001000 - 0000006000 pattern 9 ... But in fact Linux didn't test anything for patterns > 4 as the default case in memtest() is to leave the function. I suggest to use the memtest parameter as the number of tests to be performed and to re-iterate over all existing patterns. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25x86: usercopy: check for total size when deciding non-temporal cutoffIngo Molnar
Impact: make more types of copies non-temporal This change makes the following simple fix: 30d697f: x86: fix performance regression in write() syscall A bit more sophisticated: we check the 'total' number of bytes written to decide whether to copy in a cached or a non-temporal way. This will for example cause the tail (modulo 4096 bytes) chunk of a large write() to be non-temporal too - not just the page-sized chunks. Cc: Salman Qazi <sqazi@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25x86, mm: pass in 'total' to __copy_from_user_*nocache()Ingo Molnar
Impact: cleanup, enable future change Add a 'total bytes copied' parameter to __copy_from_user_*nocache(), and update all the callsites. The parameter is not used yet - architecture code can use it to more intelligently decide whether the copy should be cached or non-temporal. Cc: Salman Qazi <sqazi@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25Merge branch 'x86/asm' into x86/mmIngo Molnar
2009-02-24x86, mce: enable machine checks in 32-bit defconfigH. Peter Anvin
Impact: defconfig change Enable MCE in the 32-bit defconfig. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-24x86, mce: enable machine checks in 64-bit defconfigAndi Kleen
Impact: defconfig change Enable MCE in the 64-bit defconfig. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2009-02-24Merge branch 'proc-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc * 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc: proc: fix PG_locked reporting in /proc/kpageflags
2009-02-24Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: Add i2c_board_info for RiscPC PCF8583 i2c: Make sure i2c_algo_bit_data.timeout is HZ-independent i2c-dev: Clarify the unit of ioctl I2C_TIMEOUT i2c: Timeouts reach -1 i2c: Fix misplaced parentheses
2009-02-24Merge branch 'firedtv-merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'firedtv-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firedtv: dvb_frontend_info for FireDTV S2, fix "frequency limits undefined" error firedtv: massive refactoring firedtv: rename files, variables, functions from firesat to firedtv firedtv: Use DEFINE_SPINLOCK firedtv: fix registration - adapter number could only be zero firedtv: use length_field() of PMT as length firedtv: fix returned struct for ca_info firedtv: cleanups and minor fixes ieee1394: remove superfluous assertions ieee1394: inherit ud vendor_id from node vendor_id ieee1394: add hpsb_node_read() and hpsb_node_lock() ieee1394: use correct barrier types between accesses of nodeid and generation firesat: copyrights, rename to firedtv, API conversions, fix remote control input firesat: avc resend firesat: update isochronous interface, add CI support firesat: add DVB-S support for DVB-S2 devices firesat: fix DVB-S2 device recognition DVB: add firesat driver
2009-02-24Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Fix deadlock in ext4_write_begin() and ext4_da_write_begin() ext4: Add fallback for find_group_flex
2009-02-24x86: check range in reserve_early()Yinghai Lu
Impact: cleanup one 32-bit system reports: BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001c000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) DMI 2.0 present. last_pfn = 0x1c000 max_arch_pfn = 0x100000 kernel direct mapping tables up to 1c000000 @ 7000-c000 .. RAMDISK: 1bc69000 - 1bfef4fa .. 0MB HIGHMEM available. 448MB LOWMEM available. mapped low ram: 0 - 1c000000 low ram: 00000000 - 1c000000 bootmap 00002000 - 00005800 (9 early reservations) ==> bootmem [0000000000 - 001c000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 00009ed14c] TEXT DATA BSS ==> [0000400000 - 00009ed14c] #4 [001bc69000 - 001bfef4fa] RAMDISK ==> [001bc69000 - 001bfef4fa] #5 [00009ee000 - 00009f2000] INIT_PG_TABLE ==> [00009ee000 - 00009f2000] #6 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] #7 [0000007000 - 0000007000] PGTABLE #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000] Notice the strange blank PGTABLE entry. The reason is init_pg_table is big enough, and zero range is called with init_memory_mapping/reserve_early(). So try to check the range in reserve_early() v2: fix the reversed compare Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: nickpiggin@yahoo.com.au Cc: ink@jurassic.park.msu.ru Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-24x86_32: summit_32, de-inline functionsJiri Slaby
The ones which go only into struct genapic are de-inlined by compiler anyway, so remove the inline specifier from them. Afterwards, remove summit_setup_portio_remap completely as it is unused. Remove inline also from summit_cpu_mask_to_apicid, since it's not worth it (it is used in struct genapic too). Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-24x86_32: summit_32, use BAD_APICIDJiri Slaby
Use BAD_APICID instead of 0xFF constants in summit_cpu_mask_to_apicid. Also remove bogus comments about what we actually return. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-24Merge branches 'x86/acpi', 'x86/apic', 'x86/asm', 'x86/cleanups', 'x86/mm', ↵Ingo Molnar
'x86/signal' and 'x86/urgent'; commit 'v2.6.29-rc6' into x86/core
2009-02-24x86, Voyager: fix compile by lifting the degeneracy of phys_cpu_present_mapJames Bottomley
This was changed to a physmap_t giving a clashing symbol redefinition, but actually using a physmap_t consumes rather a lot of space on x86, so stick with a private copy renamed with a voyager_ prefix and made static. Nothing outside of the Voyager code uses it, anyway. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-24Add i2c_board_info for RiscPC PCF8583Russell King
Add the necessary i2c_board_info structure to fix the lack of PCF8583 RTC on RiscPC. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <a.zummo@towertech.it>
2009-02-24i2c: Make sure i2c_algo_bit_data.timeout is HZ-independentJean Delvare
i2c_algo_bit_data.timeout is supposed to be in jiffies, so drivers should use set this value in terms of HZ. Ultimately I think this field should be discarded in favor of i2c_adapter.timeout, but that's left for a future patch. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Lennert Buytenhek <kernel@wantstofly.org> Acked-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
2009-02-24i2c-dev: Clarify the unit of ioctl I2C_TIMEOUTJean Delvare
The unit in which user-space can set the bus timeout value is jiffies for historical reasons (back when HZ was always 100.) This is however not good because user-space doesn't know how long a jiffy lasts. The timeout value should instead be set in a fixed time unit. Given the original value of HZ, this unit should be 10 ms, for compatibility. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2009-02-24i2c: Timeouts reach -1Roel Kluin
With a postfix decrement these timeouts reach -1 rather than 0, but after the loop it is tested whether they have become 0. As pointed out by Jean Delvare, the condition we are waiting for should also be tested before the timeout. With the current order, you could exit with a timeout error while the job is actually done. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-02-24i2c: Fix misplaced parenthesesRoel Kluin
Fix misplaced parentheses. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-02-24proc: fix PG_locked reporting in /proc/kpageflagsHelge Bahmann
Expr always evaluates to zero. Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 14:31:37 +0000