summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-05-10Bluetooth: Ignore Tx Window value with Streaming modeGustavo F. Padovan
Tx Window value shall not be used with Streaming Mode and the receiver of the config Request shall ignore its value. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Add timer to Acknowledge I-framesGustavo F. Padovan
We ack I-frames on each txWindow/5 I-frames received, but if the sender stop to send I-frames and it's not a txWindow multiple we can leave some frames unacked. So I added a timer to ack I-frames on this case. The timer expires in 200ms. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Finish implementation for Rec RR (P=1) on ERTMGustavo F. Padovan
Now the code handles the case under SREJ_SENT state. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Remove duplicate use of __get_reqseq() macro on L2CAPGustavo F. Padovan
tx_seq var already has the value of __get_reqseq(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Group the ack of I-frames into l2cap_data_channel_rrframe()Gustavo F. Padovan
It also fix a bug: we weren't acknowledging I-frames when P=1. Note that when F=1 we are acknowledging packets before setting RemoteBusy to False. The spec says we should do that in the opposite order, but acknowledment of packets doesn't care about RemoteBusy flag so we can do that in the order we want. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Handle all cases of receipt of RNR-frames into L2CAPGustavo F. Padovan
We weren't handling the receipt under SREJ_SENT state table. It also introduce l2cap_send_srejtail(). It will be used in the nexts commits too. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Split l2cap_data_channel_sframe()Gustavo F. Padovan
Create a function for each type fo S-frame and avoid a lot of nested code. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Add Recv RR (P=0)(F=0) for SREJ_SENT state on ERTMGustavo F. Padovan
This finishes the implementation of Recv RR (P=0)(F=0) for the Enhanced Retransmission Mode on L2CAP. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Move set of P-bit to l2cap_send_sframe()Gustavo F. Padovan
Abstract the send of of P-bit and avoids code duplication like we did with the setting of F-bit. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Implement SendAck() Action on ERTM.Gustavo F. Padovan
Shall be used to ack received frames, It must decide type of acknowledgment between a RR frame, a RNR frame or transmission of pending I-frames. It also modifies l2cap_ertm_send() to report the number of frames sent. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Check if SDU size is greater than MTU on L2CAPGustavo F. Padovan
After reassembly the SDU we need to check his size. It can't overflow the MTU size. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Check the minimum {I,S}-frame size into L2CAPGustavo F. Padovan
All packets with size fewer than the minimum specified is dropped. Note that the size of the l2cap basic header, FCS and SAR fields are already subtracted of len at the moment of the size check. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Support case with F bit set under WAIT_F state.Gustavo F. Padovan
On receipt of a F=1 under WAIT_F state ERTM shall stop monitor timer and start retransmission timer (if there are unacked frames). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Implement 'Send IorRRorRNR' eventGustavo F. Padovan
After receive a RR with P bit set ERTM shall use this funcion to choose what type of frame to reply with F bit = 1. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Use a l2cap_pinfo struct instead l2cap_pi() macroGustavo F. Padovan
Trivial clean up. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Fix ACL MTU issueGustavo F. Padovan
ERTM and Streaming Modes was having problems when the ACL MTU is lower than MPS. The 'minus 10' is to take in account the header and fcs lenghts. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Fix expected_tx_seq calculation on L2CAPGustavo F. Padovan
All operation related to the txWindow should be modulo 64. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Fix memory leak of S-frames into L2CAPGustavo F. Padovan
l2cap_data_channel do not free the S-frame, so we free it here. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Move specific Basic Mode code to the right placeGustavo F. Padovan
Inside "case L2CAP_MODE_BASIC:" we don't need to check for sk_type and L2CAP mode. So only the length check is fine. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Trivial clean ups to SCOGustavo F. Padovan
Remove extra braces and labels, break over column 80 lines, etc Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Make hci_send_sco() voidGustavo F. Padovan
It also removes an unneeded check for the MTU. The check is done before on sco_send_frame() Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Fix wrong packet type count incrementGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Use the proper function cast to get hdr dataGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Fix return value when bt_skb_alloc failsGustavo F. Padovan
Set the proper error(ENOMEM), instead of just return 0. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-08ipv4: remove ip_rt_secret timer (v4)Neil Horman
A while back there was a discussion regarding the rt_secret_interval timer. Given that we've had the ability to do emergency route cache rebuilds for awhile now, based on a statistical analysis of the various hash chain lengths in the cache, the use of the flush timer is somewhat redundant. This patch removes the rt_secret_interval sysctl, allowing us to rely solely on the statistical analysis mechanism to determine the need for route cache flushes. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-07Revert "microblaze: Kill NET_SKB_PAD and NET_IP_ALIGN overrides."David S. Miller
This reverts commit 39e0786d3cf39c6d2f47b4818ae2da8b8ebc9ce2. On request from microblaze developers, they are going to handle this differently. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06bnx2: Add prefetches to rx path.Michael Chan
Add prefetches of the skb and the next rx descriptor to speed up rx path. Use prefetchw() for the skb [suggested by Eric Dumazet]. The rx descriptor is in skb->data which is mapped for streaming mode DMA. Eric Dumazet pointed out that we should not prefetch the data before dma_sync. So we prefetch only if dma_sync is no_op on the system. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06bnx2: Add GRO support.Michael Chan
And turn on NETIF_F_GRO by default [requested by DaveM]. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06tehuti: Remove unnecessary memset of netdev private dataTobias Klauser
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06sunhme: Remove unnecessary memset of netdev private dataTobias Klauser
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06smc9194: Remove unnecessary memset of netdev private dataTobias Klauser
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06ethoc: Remove unnecessary memset of napi member in netdev private dataTobias Klauser
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set the napi member it to 0 explicitely. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06bcm63xx_enet: Remove unnecessary memset of netdev private dataTobias Klauser
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06KS8695: Remove unnecessary memset of netdev private dataTobias Klauser
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-063c523: Remove unnecessary memset of netdev private dataTobias Klauser
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-063c507: Remove unnecessary memset of netdev private dataTobias Klauser
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set it to 0 again. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06rps: Various optimizationsEric Dumazet
Introduce ____napi_schedule() helper for callers in irq disabled contexts. rps_trigger_softirq() becomes a leaf function. Use container_of() in process_backlog() instead of accessing per_cpu address. Use a custom inlined version of __napi_complete() in process_backlog() to avoid one locked instruction : only current cpu owns and manipulates this napi, and NAPI_STATE_SCHED is the only possible flag set on backlog. we can use a plain write instead of clear_bit(), and we dont need an smp_mb() memory barrier, since RPS is on, backlog is protected by a spinlock. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06microblaze: Kill NET_SKB_PAD and NET_IP_ALIGN overrides.David S. Miller
NET_IP_ALIGN defaults to 2, no need to override. NET_SKB_PAD is now 64, which is much larger than microblaze's L1_CACHE_SIZE so no need to override that either. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06net: Increase NET_SKB_PAD to 64 bytesEric Dumazet
eth_type_trans() & get_rps_cpus() currently need two 64bytes cache lines in packet to compute rxhash. Increasing NET_SKB_PAD from 32 to 64 reduces the need to one cache line only, and makes RPS faster. NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06ipv6: udp: make short packet logging consistent with ipv4Bjørn Mork
Adding addresses and ports to the short packet log message, like ipv4/udp.c does it, makes these messages a lot more useful: [ 822.182450] UDPv6: short packet: From [2001:db8:ffb4:3::1]:47839 23715/178 to [2001:db8:ffb4:3:5054:ff:feff:200]:1234 This requires us to drop logging in case pskb_may_pull() fails, which also is consistent with ipv4/udp.c Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06net: emaclite: Use resource_sizeTobias Klauser
Use the resource_size function instead of manually calculating the resource size. This reduces the chance of introducing off-by-one errors. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06e1000e: Reset 82577/82578 PHY before first PHY register readBruce Allan
Reset the PHY before first accessing it. Doing so, ensure that the PHY is in a known good state before we read/write PHY registers. This fixes a driver probe failure. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06e1000e: reset MAC-PHY interconnect on 82577/82578 during Sx->S0Bruce Allan
During Sx->S0 transitions, the interconnect between the MAC and PHY on 82577/82578 can remain in SMBus mode instead of transitioning to the PCIe-like mode required during normal operation. Toggling the LANPHYPC Value bit essentially resets the interconnect forcing it to the correct mode. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06netpoll: Use 'bool' for netpoll_rx() return type.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06bonding: make bonding support netpollWANG Cong
Based on Andy's work, but I modified a lot. Similar to the patch for bridge, this patch does: 1) implement the 2 methods to support netpoll for bonding; 2) modify netpoll during forwarding packets via bonding; 3) disable netpoll support of bonding when a netpoll-unabled device is added to bonding; 4) enable netpoll support when all underlying devices support netpoll. Cc: Andy Gospodarek <gospo@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06bridge: make bridge support netpollWANG Cong
Based on the previous patch, make bridge support netpoll by: 1) implement the 2 methods to support netpoll for bridge; 2) modify netpoll during forwarding packets via bridge; 3) disable netpoll support of bridge when a netpoll-unabled device is added to bridge; 4) enable netpoll support when all underlying devices support netpoll. Cc: David Miller <davem@davemloft.net> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06netpoll: add generic support for bridge and bonding devicesWANG Cong
This whole patchset is for adding netpoll support to bridge and bonding devices. I already tested it for bridge, bonding, bridge over bonding, and bonding over bridge. It looks fine now. To make bridge and bonding support netpoll, we need to adjust some netpoll generic code. This patch does the following things: 1) introduce two new priv_flags for struct net_device: IFF_IN_NETPOLL which identifies we are processing a netpoll; IFF_DISABLE_NETPOLL is used to disable netpoll support for a device at run-time; 2) introduce one new method for netdev_ops: ->ndo_netpoll_cleanup() is used to clean up netpoll when a device is removed. 3) introduce netpoll_poll_dev() which takes a struct net_device * parameter; export netpoll_send_skb() and netpoll_poll_dev() which will be used later; 4) hide a pointer to struct netpoll in struct netpoll_info, ditto. 5) introduce ->real_dev for struct netpoll. 6) introduce a new status NETDEV_BONDING_DESLAE, which is used to disable netconsole before releasing a slave, to avoid deadlocks. Cc: David Miller <davem@davemloft.net> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06ixgbevf: Cache PF ack bit in interruptGreg Rose
When the PF acks a message from the VF the VF gets an interrupt. It must cache the ack bit so that polling SW will not miss the ack. Also avoid reading the message buffer on acks because that also will clear the ack bit. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06ixgbe: Streamline MC filter setup for VFsGreg Rose
The driver was calling the set Rx mode function for every multicast filter set by the VF. When starting many VMs where each might have multiple VLAN interfaces this would result in the function being called hundreds or even thousands of times. This is unnecessary for the case of the imperfect filters used in the MTA and has been streamlined to be more efficient. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06ixgbe: Remove unneeded register writes in VF VLAN setupGreg Rose
The driver is unnecessarily writing values to VLAN control registers. These writes already done elsewhere and are superfluous here. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-27 01:26:30 +0000