summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-11-25mac80211: do not compute offset from ssn in Rx AMPDU reordering bufferKarl Beldan
Currently, frames that go into the reordering buffer are stored at index ieee80211_sn_sub(sn, tid_rx->ssn) % tid_rx->buf_size. The offset calculation to the starting sequence number (SSN) is useless and just adds overhead so simply use sn % tid_rx->buf_size. This means the reordering buffer will start to be filled somewhere in the middle (at SSN % buf_size) and continue to get used from there, but there's no reason to start from the beginning. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: consolidate passive-scan and no-ibss flagsLuis R. Rodriguez
These two flags are used for the same purpose, just combine them into a no-ir flag to annotate no initiating radiation is allowed. Old userspace sending either flag will have it treated as the no-ir flag. To be considerate to older userspace we also send both the no-ir flag and the old no-ibss flags. Newer userspace will have to be aware of older kernels. Update all places in the tree using these flags with the following semantic patch: @@ @@ -NL80211_RRF_PASSIVE_SCAN +NL80211_RRF_NO_IR @@ @@ -NL80211_RRF_NO_IBSS +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_PASSIVE_SCAN +IEEE80211_CHAN_NO_IR @@ @@ -IEEE80211_CHAN_NO_IBSS +IEEE80211_CHAN_NO_IR @@ @@ -NL80211_RRF_NO_IR | NL80211_RRF_NO_IR +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_IR +IEEE80211_CHAN_NO_IR @@ @@ -(NL80211_RRF_NO_IR) +NL80211_RRF_NO_IR @@ @@ -(IEEE80211_CHAN_NO_IR) +IEEE80211_CHAN_NO_IR Along with some hand-optimisations in documentation, to remove duplicates and to fix some indentation. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [do all the driver updates in one go] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25nl80211: better document NL80211_CMD_TDLS_MGMTArik Nemtsov
This command has different semantics depending on the action code sent. Document this fact and detail the supported action codes. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
2013-11-05Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-11-05Merge branch 'for-linville' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2013-11-05Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2013-11-05Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-11-05Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: net/wireless/reg.c
2013-11-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/drv.c
2013-10-30iwlwifi: mvm: BT Coex - fix copy paste issueEmmanuel Grumbach
Putting the context id of the primary phy context in the placeholder of the secondary is obviously a bad idea. Spotted by smatch. Fixes: dac94da8dba3 ("iwlwifi: mvm: new BT Coex API") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: remove duplicate includesMichael Opdenacker
Reported by "make includecheck" Tested that the corresponding sources still compile well on x86 Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: warn if firmware image doesn't existJohannes Berg
If the firmware image that we attempt to load doesn't actually exist we have a broken firmware file or other code not checking things correctly, so warn in such a case. Also avoid assigning cur_ucode/ucode_loaded then. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: mvm: add missing break in debugfsJohannes Berg
When writing the disable_power_off value, the LPRX enable value also gets written unintentionally, so fix that by adding the missing break statement. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: mvm: capture the FCS in monitor modeJohannes Berg
This can be useful when using the device as a sniffer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: pcie: move warning message into warningJohannes Berg
Having a WARN_ON() followed by a printed message is less useful than having the message in the warning so move the message. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: mvm: BT Coex fix NULL pointer dereferenceEmmanuel Grumbach
When we disassociate, mac80211 removes the station and then, it sets the bss it unsets the assoc bool in bss_info. Since the firwmware wants it the opposite (first set the MAC context as unassoc, and only then, remove the STA of the API), we have a small period of time in which the STA in firmware doesn't have a valid ieee80211_sta pointer. During that time, iwl_mvm_vif->ap_sta_id, is still set to the STA in firmware that represent the AP. This avoids: [ 4481.476246] BUG: unable to handle kernel NULL pointer dereference at 00000045 [ 4481.479521] IP: [<f8416a6a>] iwl_mvm_bt_coex_reduced_txp+0x7a/0x190 [iwlmvm] [ 4481.482023] *pde = 00000000 [ 4481.484332] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 4481.486897] Modules linked in: netconsole configfs autofs4 rfcomm(O) bnep(O) nfsd nfs_acl auth_rpcgss exportfs nfs lockd binfmt_misc sunrpc fscache arc4 iwlmvm(O) mac80211(O) btusb(O) iwlwifi(O) bluetooth(O) cfg80211(O) snd_hda_codec_hdmi coretemp dell_wmi snd_hda_codec_idt compat(O) dell_laptop aesni_intel i915 sparse_keymap dcdbas cryptd psmouse serio_raw aes_i586 microcode snd_hda_intel drm_kms_helper snd_hda_codec drm snd_pcm snd_timer i2c_algo_bit video intel_agp intel_gtt snd soundcore snd_page_alloc crc32c_intel ahci sdhci_pci libahci sdhci mmc_core e1000e xhci_hcd [last unloaded: configfs] [ 4481.502983] [ 4481.505599] Pid: 6507, comm: kworker/0:1 Tainted: G O 3.4.43-dev #1 Dell Inc. Latitude E6430/0CMDYV [ 4481.508575] EIP: 0060:[<f8416a6a>] EFLAGS: 00010246 CPU: 0 [ 4481.511248] EIP is at iwl_mvm_bt_coex_reduced_txp+0x7a/0x190 [iwlmvm] [ 4481.513947] EAX: ffffffea EBX: 00000002 ECX: 00000001 EDX: 00000001 [ 4481.516710] ESI: ec6f0f28 EDI: 00000000 EBP: e8175dfc ESP: e8175d9c [ 4481.519445] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 4481.522185] CR0: 8005003b CR2: 00000045 CR3: 01a5e000 CR4: 001407d0 [ 4481.524950] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 4481.527768] DR6: ffff0ff0 DR7: 00000400 [ 4481.530565] Process kworker/0:1 (pid: 6507, ti=e8174000 task=e8032b20 task.ti=e8174000) [ 4481.533447] Stack: [ 4481.536379] e472439f 00003a12 e8032b20 e8033048 00000001 e8175ddc 00000246 e8033040 [ 4481.540132] 00000002 01814990 ec4d1ddc e8175dcc 00000000 00000000 00000000 00000000 [ 4481.543867] 00000000 00000000 00000001 000001c8 009b0002 ec4d1ddc ec6f0f28 00000000 [ 4481.547633] Call Trace: [ 4481.550578] [<f8418027>] iwl_mvm_bt_rssi_event+0x197/0x220 [iwlmvm] [ 4481.553537] [<f840919c>] iwl_mvm_stat_iterator+0xdc/0x240 [iwlmvm] [ 4481.556582] [<f8d129c2>] __iterate_active_interfaces+0xe2/0x1f0 [mac80211] [ 4481.559544] [<f84090c0>] ? iwl_mvm_update_smps+0x90/0x90 [iwlmvm] [ 4481.562519] [<f84090c0>] ? iwl_mvm_update_smps+0x90/0x90 [iwlmvm] [ 4481.565498] [<f8d12b0c>] ieee80211_iterate_active_interfaces+0x3c/0x50 [mac80211] [ 4481.568421] [<f8409b43>] iwl_mvm_rx_statistics+0xb3/0x130 [iwlmvm] [ 4481.571349] [<f8405431>] iwl_mvm_async_handlers_wk+0xc1/0xf0 [iwlmvm] [ 4481.574251] [<c1052915>] ? process_one_work+0x105/0x5c0 [ 4481.577162] [<c1052991>] process_one_work+0x181/0x5c0 [ 4481.580025] [<c1052915>] ? process_one_work+0x105/0x5c0 [ 4481.582861] [<f8405370>] ? iwl_mvm_rx_fw_logs+0x20/0x20 [iwlmvm] [ 4481.585722] [<c10530f1>] worker_thread+0x121/0x2c0 [ 4481.588536] [<c1052fd0>] ? rescuer_thread+0x1d0/0x1d0 [ 4481.591323] [<c105af0d>] kthread+0x7d/0x90 [ 4481.594059] [<c105ae90>] ? flush_kthread_worker+0x120/0x120 [ 4481.596868] [<c15b7cc2>] kernel_thread_helper+0x6/0x10 [ 4481.599605] Code: 9d de c3 c8 85 c0 74 0d 80 3d f8 ae 42 f8 00 0f 84 dc 00 00 00 8b 45 c8 0f b6 d3 31 ff 89 55 c0 8b 84 90 d8 03 00 00 0f b6 55 c7 <38> 50 5b 89 45 bc 0f 84 a8 00 00 00 a1 e4 d2 04 c2 85 c0 0f 84 [ 4481.611782] EIP: [<f8416a6a>] iwl_mvm_bt_coex_reduced_txp+0x7a/0x190 [iwlmvm] SS:ESP 0068:e8175d9c [ 4481.614985] CR2: 0000000000000045 [ 4481.687441] ---[ end trace b11bc915fbac4412 ]--- Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: transport config n_no_reclaim_cmds should be unsignedJohannes Berg
The number of commands can never be negative, so it should be using an unsigned type. This also shuts up an smatch warning elsewhere in the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: mvm: update UAPSD support TLV bitsAlexander Bondar
Change old UAPSD bit to PM_CMD_SUPPORT, and add a new bit to indicate real UAPSD support. Don't use UAPSD when the firmware doesn't support it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-28nl80211: fix channel switch parsingAndrei Otcheretianski
The nl80211 attribute NL80211_ATTR_CSA_C_OFF_BEACON should be nested inside NL80211_ATTR_CSA_IES, but commit ee4bc9e75811d2c0cb5f2a2fc5b5 ("nl80211: enable IBSS support for channel switch announcements") added a check in the outer message attributes. Fix channel switch calls by removing the erroneus condition. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211_hwsim: Fix tracking of beaconing for multi-vifJouni Malinen
mac80211_hwsim canceled beacon_timer on any vif changing from enabled to disabled beaconing. This breaks cases where there are multiple beaconing vifs and only one of them is removed. Fix this by tracking beaconing status per vif and disable beacon_timer only if no active vif remain with beaconing enabled. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: fix uninitialized variableMichal Kazior
CSA completion could call in a driver bss_info_changed() with a garbled `changed` flag leading to all sorts of problems. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: process mesh channel switching using beaconChun-Yeow Yeoh
Trigger the mesh channel switching procedure if the mesh STA happens to miss the CSA action frame but able to receive the beacon containing the CSA and MCSP elements from its peer mesh STAs. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> [fix locking in ieee80211_mesh_process_chnswitch()] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28{nl,cfg,mac}80211: implement mesh channel switch userspace APIChun-Yeow Yeoh
Implement the required procedures for mesh channel switching as defined in the IEEE Std 802.11-2012 section 10.9.8.4.3 and also handle the CSA and MCSP elements as followed: * Add the function for updating the beacon and probe response frames with CSA and MCSP elements during the period of switching to the new channel. Both CSA and MCSP elements must be included in beacon and probe response frames until the intended channel switch time. * The ifmsh->csa_settings is set to NULL and the CSA and MCSP elements will then be removed from the beacon or probe response frames once the new channel is switched to. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28{nl,cfg,mac}80211: enable the triggering of CSA frame in meshChun-Yeow Yeoh
Allow the triggering of CSA frame using mesh interface. The rules are more or less same with IBSS, such as not allowed to change between the band and channel width has to be same from the previous mode. Also, move the ieee80211_send_action_csa to a common space so that it can be re-used by mesh interface. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: process the CSA frame for mesh accordinglyChun-Yeow Yeoh
Process the CSA frame according to the procedures define in IEEE Std 802.11-2012 section 10.9.8.4.3 as follow: * The mesh channel switch parameters element (MCSP) must be availabe. * If the MCSP's TTL is 1, drop the frame but still process the CSA. * If the MCSP's precedence value is less than or equal to the current precedence value, drop the frame and do not process the CSA. * The CSA frame is forwarded after TTL is decremented by 1 and the initiator field is set to 0. Transmit restrict field and others are maintained as is. * No beacon or probe response frame are handled here. Also, introduce the debug message used for mesh CSA purpose. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: refactor the parsing of chan switch ieChun-Yeow Yeoh
Refactor the channel switch IE parsing to reduce the number of function parameters. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: add ieee80211_tx_prepare_skb() helper functionFelix Fietkau
This can be used by a driver to prepare skbs for transmission, which were obtained via functions such as ieee80211_probereq_get or ieee80211_nullfunc_get. This is useful for drivers that want to send those frames directly, but need rate control information to be prepared first. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28cfg80211: export reg_initiator_name()Luis R. Rodriguez
Drivers can now use this to parse the regulatory request and be more verbose when needed. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: fixes for mesh powersave logicMarco Porsch
This patch fixes errors in the mesh powersave logic which cause that remote peers do not get peer power mode change notifications and mesh peer service periods (MPSPs) got stuck. When closing a peer link, set the (now invalid) peer-specific power mode to 'unknown'. Avoid overhead when local power mode is unchanged. Reliably clear MPSP flags on peering status update. Avoid MPSP flags getting stuck by not requesting a further MPSP ownership if we already are an MPSP owner. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: Remove check for offchannel state when waking netdev queuesSeth Forshee
6c17b77b67587b9f9e3070fb89fe98cef3187131 ensures that a device's mac80211 queues will remain stopped while offchannel. Since the vif can no longer be offchannel when the queues wake it's not necessary to check for this before waking its netdev queues. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28net: rfkill: gpio: add ACPI supportHeikki Krogerus
Including ACPI ID for Broadcom GPS receiver BCM4752. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28net: rfkill: gpio: prepare for DT and ACPI supportHeikki Krogerus
This will add the relevant values like the gpios and the type in rfkill_gpio_platform_data to the rfkill_gpio_data structure. It will allow those values to be easily picked from DT and ACPI tables later. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28net: rfkill: gpio: spinlock-safe GPIO accessHeikki Krogerus
This sets the direction of the gpio once when it's requested, and uses the spinlock-safe gpio_set_state() to change the state. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28net: rfkill: gpio: clean up clock handlingHeikki Krogerus
Use a simple flag to see the state of the clock, and make the clock available even without a name. Also, get rid of HAVE_CLK dependency. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28net: rfkill: gpio: convert to resource managed allocationHeikki Krogerus
And remove now unneeded resource freeing. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28cfg80211: fix docbook referencesJohannes Berg
Two functions were changed but their references weren't updated in the docbook template, propagate the change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: add missing IEEE80211_HW_SUPPORTS_HT_CCK_RATES docsJohannes Berg
Document the IEEE80211_HW_SUPPORTS_HT_CCK_RATES flag. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: enable DFS for IBSS modeSimon Wunderlich
Allow changing to DFS channels if the channel is available for beaconing and userspace controls DFS operation. Channel switch announcement from other stations on DFS channels will be interpreted as radar event. These channels will then be marked as unvailable. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28nl80211/cfg80211: enable DFS for IBSS modeSimon Wunderlich
To use DFS in IBSS mode, userspace is required to react to radar events. It can inform nl80211 that it is capable of doing so by adding a NL80211_ATTR_HANDLE_DFS attribute when joining the IBSS. This attribute is supplied to let the kernelspace know that the userspace application can and will handle radar events, e.g. by intiating channel switches to a valid channel. DFS channels may only be used if this attribute is supplied and the driver supports it. Driver support will be checked even if a channel without DFS will be initially joined, as a DFS channel may be chosen later. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [fix attribute name in commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: implement SMPS for APEmmanuel Grumbach
When the driver requests to move to STATIC or DYNAMIC SMPS, we send an action frame to each associated station and reconfigure the channel context / driver. Of course, non-MIMO stations are ignored. The beacon isn't updated. The association response will include the original capabilities. Stations that associate while in non-OFF SMPS mode will get an action frame right after association to inform them about our current state. Note that we wait until the end of the EAPOL. Sending an action frame before the EAPOL is finished can be an issue for a few clients. Clients aren't likely to send EAPOL frames in MIMO anyway. When the SMPS configuration gets more permissive (e.g. STATIC -> OFF), we don't wake up stations that are asleep We remember that they don't know about the change and send the action frame when they wake up. When the SMPS configuration gets more restrictive (e.g. OFF -> STATIC), we set the TIM bit for every sleeping STA. uAPSD stations might send MIMO until they poll the action frame, but this is for a short period of time. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [fix vht streams loop, initialisation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-23wlcore: save last regdom configuration on stopEliad Peller
In order to reconfigure the correct reg domain on recovery, we have to save the current configuration before clearing it (wl->reg_ch_conf_pending is considered before configuring a new regdomain). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: fix started_vifs calculationEliad Peller
wlcore configures different dwell times according to number of active interfaces (in order to prevent hurting VO during scan). However, determining active vif only according to bss_conf->idle is not explicit enough, and might result in non-started vifs being counted as started as well (e.g. unassociated sta during sta). Fix it by checking for explicit conditions according to the vif type. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: wakeup from ELP before starting recoveryBarak Bercovitz
Make sure the FW is awake when entering recovery. This is useful for reading the FW panic log and also some FW registers giving us crash report stats. We must do this before interrupts are disabled since we rely on an interrupt to complete the wakeup. If the wakeup fails, continue recovery normally. All read/writes will be blocked and won't do any harm. Signed-off-by: Barak Bercovitz <barak@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: Allow stopping fw log in recoveryBarak Bercovitz
The FW panic log is read during recovery work. It has to be stopped properly before reading. otherwise, inconsistent data might be read which cause the driver to freeze. __wlcore_cmd_send has to work for the special case of CMD_STOP_FWLOGGER, while in recovery, in order to stop the fw log before it is read. Signed-off-by: Barak Bercovitz <barak@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: read fw panic log only in host modeBarak Bercovitz
Reading FW panic log is only supported in host mode (SDIO) Signed-off-by: Barak Bercovitz <barak@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore/wl18xx/wl12xx: FW log params per chip archIgal Chernobelsky
FW memory block size and FW log end marker parameters are added to wl structure and are initialized per chip architecture. convert_hwaddr hw operation is added to convert chip dependent FW internal address. Copy from FW log is also simplified to copy the entire memory block as FW logger utility is repsponsible for parsing of FW log content. Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wl12xx/wl18xx: update default fw logger's settingsIdo Reis
update the fw logger mode to continuous, and output to dbgpins (uart). Signed-off-by: Ido Reis <idor@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: fwlog dynamic mem_block controlIdo Reis
number of fwlog mem_blocks can be configured using module param. this is a fw debug feature: in case a large fw log data is busrted during a short period of time, the memory get filled and data is lost. this allows us to dynamicly set the fw log mem_block usage, although configuring more mem_block for logger comes at the expense of TP. Signed-off-by: Yair Shapira <yair.shapira@ti.com> Signed-off-by: Ido Reis <idor@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: fix interrogate command lengthIgal Chernobelsky
Change interrogate command prototype to have command size and returned buffer length. This fixes the issue when command parameters are needed to be passed to FW in addition to acx header as in the case with get RSSI command, where role_id has to be passed. Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-14 12:20:17 +0000