summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-02Merge tag 'pm-4.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix three issues in cpufreq drivers: one recent regression, one leftover Kconfig dependency and one old but "stable" material. Specifics: - Make the task scheduler load and utilization signals be frequency-invariant again after recent changes in the SCPI cpufreq driver (Dietmar Eggemann). - Drop an unnecessary leftover Kconfig dependency from the SCPI cpufreq driver (Sudeep Holla). - Fix the initialization of the s3c24xx cpufreq driver (Viresh Kumar)" * tag 'pm-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: s3c24xx: Fix broken s3c_cpufreq_init() cpufreq: scpi: Fix incorrect arm_big_little config dependency cpufreq: scpi: invoke frequency-invariance setter function
2018-03-03kconfig: fix line number in recursive inclusion error messageMasahiro Yamada
When recursive inclusion is detected, the line number of the last 'included from:' is wrong. [Test Case] Kconfig: -------->8-------- source "Kconfig2" -------->8-------- Kconfig2: -------->8-------- source "Kconfig3" -------->8-------- Kconfig3: -------->8-------- source "Kconfig" -------->8-------- [Result] $ make allyesconfig scripts/kconfig/conf --allyesconfig Kconfig Kconfig:1: recursive inclusion detected. Inclusion path: current file : 'Kconfig' included from: 'Kconfig3:1' included from: 'Kconfig2:1' included from: 'Kconfig:3' scripts/kconfig/Makefile:89: recipe for target 'allyesconfig' failed make[1]: *** [allyesconfig] Error 1 Makefile:512: recipe for target 'allyesconfig' failed make: *** [allyesconfig] Error 2 where we expect current file : 'Kconfig' included from: 'Kconfig3:1' included from: 'Kconfig2:1' included from: 'Kconfig:1' The 'iter->lineno+1' in the second fpinrtf() should be 'iter->lineno-1'. I refactored the code to merge the two fprintf() calls. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-03Coccinelle: memdup: Fix typo in warning messagesDafna Hirschfeld
Replace 'kmemdep' with 'kmemdup' in warning messages. Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Nicolas Palix <nicolas.palix@imag.fr> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02i2c: octeon: Prevent error message on bus errorJan Glauber
The error message: [Fri Feb 16 13:42:13 2018] i2c-thunderx 0000:01:09.4: unhandled state: 0 is mis-leading as state 0 (bus error) is not an unknown state. Return -EIO as before but avoid printing the message. Also rename STAT_ERROR to STATE_BUS_ERROR. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-02Merge tag 'at24-4.16-rc4-for-wolfram' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current Pull in this fixup to get rid of a dependency for the next cycle: "- sort the manufacturers in DT bindings alphabetically"
2018-03-02Merge branch 'cpufreq-scpi'Rafael J. Wysocki
* cpufreq-scpi: cpufreq: scpi: Fix incorrect arm_big_little config dependency cpufreq: scpi: invoke frequency-invariance setter function
2018-03-02parisc: Reduce irq overhead when run in qemuHelge Deller
When run under QEMU, calling mfctl(16) creates some overhead because the qemu timer has to be scaled and moved into the register. This patch reduces the number of calls to mfctl(16) by moving the calls out of the loops. Additionally, increase the minimal time interval to 8000 cycles instead of 500 to compensate possible QEMU delays when delivering interrupts. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.14+
2018-03-02parisc: Use cr16 interval timers unconditionally on qemuHelge Deller
When running on qemu we know that the (emulated) cr16 cpu-internal clocks are syncronized. So let's use them unconditionally on qemu. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.14+
2018-03-02parisc: Check if secondary CPUs want own PDC callsHelge Deller
The architecture specification says (for 64-bit systems): PDC is a per processor resource, and operating system software must be prepared to manage separate pointers to PDCE_PROC for each processor. The address of PDCE_PROC for the monarch processor is stored in the Page Zero location MEM_PDC. The address of PDCE_PROC for each non-monarch processor is passed in gr26 when PDCE_RESET invokes OS_RENDEZ. Currently we still use one PDC for all CPUs, but in case we face a machine which is following the specification let's warn about it. Signed-off-by: Helge Deller <deller@gmx.de>
2018-03-02parisc: Hide virtual kernel memory layoutHelge Deller
For security reasons do not expose the virtual kernel memory layout to userspace. Signed-off-by: Helge Deller <deller@gmx.de> Suggested-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org # 4.15 Reviewed-by: Kees Cook <keescook@chromium.org>
2018-03-02parisc: Fix ordering of cache and TLB flushesJohn David Anglin
The change to flush_kernel_vmap_range() wasn't sufficient to avoid the SMP stalls.  The problem is some drivers call these routines with interrupts disabled.  Interrupts need to be enabled for flush_tlb_all() and flush_cache_all() to work.  This version adds checks to ensure interrupts are not disabled before calling routines that need IPI interrupts.  When interrupts are disabled, we now drop into slower code. The attached change fixes the ordering of cache and TLB flushes in several cases.  When we flush the cache using the existing PTE/TLB entries, we need to flush the TLB after doing the cache flush.  We don't need to do this when we flush the entire instruction and data caches as these flushes don't use the existing TLB entries.  The same is true for tmpalias region flushes. The flush_kernel_vmap_range() and invalidate_kernel_vmap_range() routines have been updated. Secondly, we added a new purge_kernel_dcache_range_asm() routine to pacache.S and use it in invalidate_kernel_vmap_range().  Nominally, purges are faster than flushes as the cache lines don't have to be written back to memory. Hopefully, this is sufficient to resolve the remaining problems due to cache speculation.  So far, testing indicates that this is the case.  I did work up a patch using tmpalias flushes, but there is a performance hit because we need the physical address for each page, and we also need to sequence access to the tmpalias flush code.  This increases the probability of stalls. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Helge Deller <deller@gmx.de>
2018-03-02kconfig: Update ncurses package names for menuconfigArvind Prasanna
The package name is ncurses-devel for Redhat based distros and libncurses-dev for Debian based distros. Signed-off-by: Arvind Prasanna <arvindprasanna@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02kbuild/kallsyms: trivial typo fixCao jin
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02kbuild: test --build-id linker flag by ld-option instead of cc-ldoptionMasahiro Yamada
'--build-id' is passed to $(LD), so it should be tested by 'ld-option'. This seems a kind of misconversion when ld-option was renamed to cc-ldoption. Commit f86fd3066052 ("kbuild: rename ld-option to cc-ldoption") renamed all instances of 'ld-option' to 'cc-ldoption'. Then, commit 691ef3e7fdc1 ("kbuild: introduce ld-option") re-added 'ld-option' as a new implementation. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignmentCao jin
GCC_PLUGINS_CFLAGS is already in the environment, so it is superfluous to add it in commandline of final build of init/. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02kconfig: Don't leak choice names during parsingMasahiro Yamada
The named choice is not used in the kernel tree, but if it were used, it would not be freed. The intention of the named choice can be seen in the log of commit 5a1aa8a1aff6 ("kconfig: add named choice group"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-02sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCEMasahiro Yamada
If CONFIG_USE_BUILTIN_DTB is enabled, but CONFIG_BUILTIN_DTB_SOURCE is empty (for example, allmodconfig), it fails to build, like this: make[2]: *** No rule to make target 'arch/sh/boot/dts/.dtb.o', needed by 'arch/sh/boot/dts/built-in.o'. Stop. Surround obj-y with ifneq ... endif. I replaced $(CONFIG_USE_BUILTIN_DTB) with 'y' since this is always the case from the following code from arch/sh/Makefile: core-$(CONFIG_USE_BUILTIN_DTB) += arch/sh/boot/dts/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_listMasahiro Yamada
The 'defconfig_list' is a weird attribute. If the '.config' is missing, conf_read_simple() iterates over all visible defaults, then it uses the first one for which fopen() succeeds. config DEFCONFIG_LIST string depends on !UML option defconfig_list default "/lib/modules/$UNAME_RELEASE/.config" default "/etc/kernel-config" default "/boot/config-$UNAME_RELEASE" default "$ARCH_DEFCONFIG" default "arch/$ARCH/defconfig" However, like other symbols, the first visible default is always written out to the .config file. This might be different from what has been actually used. For example, on my machine, the third one "/boot/config-$UNAME_RELEASE" is opened, like follows: $ rm .config $ make oldconfig 2>/dev/null scripts/kconfig/conf --oldconfig Kconfig # # using defaults found in /boot/config-4.4.0-112-generic # * * Restart config... * * * IRQ subsystem * Expose irq internals in debugfs (GENERIC_IRQ_DEBUGFS) [N/y/?] (NEW) However, the resulted .config file contains the first one since it is visible: $ grep CONFIG_DEFCONFIG_LIST .config CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" In order to stop confusing people, prevent this CONFIG option from being written to the .config file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-01Merge tag 'drm-fixes-for-v4.16-rc4' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Pretty much run of the mill drm fixes. amdgpu: - power management fixes - some display fixes - one ppc 32-bit dma fix i915: - two display fixes - three gem fixes sun4i: - display regression fixes nouveau: - display regression fix virtio-gpu: - dumb airlied ioctl fix" * tag 'drm-fixes-for-v4.16-rc4' of git://people.freedesktop.org/~airlied/linux: (25 commits) drm/amdgpu: skip ECC for SRIOV in gmc late_init drm/amd/amdgpu: Correct VRAM width for APUs with GMC9 drm/amdgpu: fix&cleanups for wb_clear drm/amdgpu: Correct sdma_v4 get_wptr(v2) drm/amd/powerplay: fix power over limit on Fiji drm/amdgpu:Fixed wrong emit frame size for enc drm/amdgpu: move WB_FREE to correct place drm/amdgpu: only flush hotplug work without DC drm/amd/display: check for ipp before calling cursor operations drm/i915: Make global seqno known in i915_gem_request_execute tracepoint drm/i915: Clear the in-use marker on execbuf failure drm/i915/cnl: Fix PORT_TX_DW5/7 register address drm/i915/audio: fix check for av_enc_map overflow drm/i915: Fix rsvd2 mask when out-fence is returned virtio-gpu: fix ioctl and expose the fixed status to userspace. drm/sun4i: Protect the TCON pixel clocks drm/sun4i: Enable the output on the pins (tcon0) drm/nouveau: prefer XBGR2101010 for addfb ioctl drm/radeon: insist on 32-bit DMA for Cedar on PPC64/PPC64LE drm/amd/display: VGA black screen from s3 when attached to hook ...
2018-03-01Merge tag 'arc-4.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - MCIP aka ARconnect fixes for SMP builds [Euginey] - preventive fix for SLC (L2 cache) flushing [Euginey] - Kconfig default fix [Ulf Magnusson] - trailing semicolon fixes [Luis de Bethencourt] - other assorted minor fixes * tag 'arc-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: setup cpu possible mask according to possible-cpus dts property ARC: mcip: update MCIP debug mask when the new cpu came online ARC: mcip: halt GFRC counter when ARC cores halt ARCv2: boot log: fix HS48 release number arc: dts: use 'atmel' as manufacturer for at24 in axs10x_mb ARC: Fix malformed ARC_EMUL_UNALIGNED default ARC: boot log: Fix trailing semicolon ARC: dw2 unwind: Fix trailing semicolon ARC: Enable fatal signals on boot for dev platforms ARCv2: Don't pretend we may set L-bit in STATUS32 with kflag instruction ARCv2: cache: fix slc_entire_op: flush only instead of flush-n-inv
2018-03-01KVM: x86: fix vcpu initialization with userspace lapicRadim Krčmář
Moving the code around broke this rare configuration. Use this opportunity to finally call lapic reset from vcpu reset. Reported-by: syzbot+fb7a33a4b6c35007a72b@syzkaller.appspotmail.com Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Fixes: 0b2e9904c159 ("KVM: x86: move LAPIC initialization after VMCS creation") Cc: stable@vger.kernel.org Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-01KVM: X86: Allow userspace to define the microcode versionWanpeng Li
Linux (among the others) has checks to make sure that certain features aren't enabled on a certain family/model/stepping if the microcode version isn't greater than or equal to a known good version. By exposing the real microcode version, we're preventing buggy guests that don't check that they are running virtualized (i.e., they should trust the hypervisor) from disabling features that are effectively not buggy. Suggested-by: Filippo Sironi <sironi@amazon.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-01KVM: X86: Introduce kvm_get_msr_feature()Wanpeng Li
Introduce kvm_get_msr_feature() to handle the msrs which are supported by different vendors and sharing the same emulation logic. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-01Merge tag 'platform-drivers-x86-v4.16-5' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform drivers fixes from Andy Shevchenko: - fix a regression on laptops like Dell XPS 9360 where keyboard stopped working. - correct sysfs wakeup attribute after removal of some drivers to reflect that they are not able to wake system up anymore. * tag 'platform-drivers-x86-v4.16-5' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: wmi: Fix misuse of vsprintf extension %pULL platform/x86: intel-hid: Reset wakeup capable flag on removal platform/x86: intel-vbtn: Reset wakeup capable flag on removal platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's
2018-03-01Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds
Pull MD bugfixes from Shaohua Li: - fix raid5-ppl flush request handling hang from Artur - fix a potential deadlock in raid5/10 reshape from BingJing - fix a deadlock for dm-raid from Heinz - fix two md-cluster of raid10 from Lidong and Guoqing - fix a NULL deference problem in device removal from Neil - fix a NULL deference problem in raid1/raid10 in specific condition from Yufen - other cleanup and fixes * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/raid1: fix NULL pointer dereference md: fix a potential deadlock of raid5/raid10 reshape md-cluster: choose correct label when clustered layout is not supported md: raid5: avoid string overflow warning raid5-ppl: fix handling flush requests md raid10: fix NULL deference in handle_write_completed() md: only allow remove_and_add_spares when no sync_thread running. md: document lifetime of internal rdev pointer. md: fix md_write_start() deadlock w/o metadata devices MD: Free bioset when md_run fails raid10: change the size of resync window for clustered raid md-multipath: Use seq_putc() in multipath_status() md/raid1: Fix trailing semicolon md/raid5: simplify uninitialization of shrinker
2018-03-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk fix from Petr Mladek: "Make sure that we wake up userspace loggers. This fixes a race introduced by the console waiter logic during this merge window" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: Wake klogd when passing console_lock owner
2018-03-01platform/x86: wmi: Fix misuse of vsprintf extension %pULLJoe Perches
%pULL doesn't officially exist but %pUL does. Miscellanea: o Add missing newlines to a couple logging messages Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-03-01KVM: SVM: Add MSR-based feature support for serializing LFENCETom Lendacky
In order to determine if LFENCE is a serializing instruction on AMD processors, MSR 0xc0011029 (MSR_F10H_DECFG) must be read and the state of bit 1 checked. This patch will add support to allow a guest to properly make this determination. Add the MSR feature callback operation to svm.c and add MSR 0xc0011029 to the list of MSR-based features. If LFENCE is serializing, then the feature is supported, allowing the hypervisor to set the value of the MSR that guest will see. Support is also added to write (hypervisor only) and read the MSR value for the guest. A write by the guest will result in a #GP. A read by the guest will return the value as set by the host. In this way, the support to expose the feature to the guest is controlled by the hypervisor. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-01KVM: x86: Add a framework for supporting MSR-based featuresTom Lendacky
Provide a new KVM capability that allows bits within MSRs to be recognized as features. Two new ioctls are added to the /dev/kvm ioctl routine to retrieve the list of these MSRs and then retrieve their values. A kvm_x86_ops callback is used to determine support for the listed MSR-based features. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [Tweaked documentation. - Radim] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-01Merge tag 'sound-4.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "The only core change is the fix for possible memory corruption by ALSA ctl API since 4.14 kernel due to a thinko. The rest are all device-specific: in addition to the usual suspects (HD-audio and USB-audio fixups), a few LPE HDMI audio fixes came in at this time" * tag 'sound-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: x86: Fix potential crash at error path ALSA: x86: Fix missing spinlock and mutex initializations ALSA: control: Fix memory corruption risk in snd_ctl_elem_read ALSA: hda - Fix pincfg at resume on Lenovo T470 dock ALSA: usb-audio: Add a quirck for B&W PX headphones ALSA: hda: Add a power_save blacklist ALSA: x86: hdmi: Add single_port option for compatible behavior
2018-03-01Merge tag 'pinctrl-v4.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Two smallish pin control fixes: one actual code fix for the Meson and a MAINTAINERS update. Summary: - fix a pin group on the Meson - assign maintainers for Freescale/NXP pin controllers" * tag 'pinctrl-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: MAINTAINERS: add Freescale pin controllers pinctrl: meson-axg: adjust uart_ao_b pin group naming
2018-03-01Merge tag 'gpio-v4.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Fix up device tree properties readout caused by my own refactorings" * tag 'gpio-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Handle deferred probing in of_find_gpio() properly gpiolib: Keep returning EPROBE_DEFER when we should
2018-03-01block: fix a typoJiufei Xue
Fix a typo in pkt_start_recovery. Fixes: 74d46992e0d9 ("block: replace bi_bdev with a gendisk pointer and partitions index") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-01block: display the correct diskname for bioJiufei Xue
bio_devname use __bdevname to display the device name, and can only show the major and minor of the part0, Fix this by using disk_name to display the correct name. Fixes: 74d46992e0d9 ("block: replace bi_bdev with a gendisk pointer and partitions index") Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-01block: fix the count of PGPGOUT for WRITE_SAMEJiufei Xue
The vm counters is counted in sectors, so we should do the conversation in submit_bio. Fixes: 74d46992e0d9 ("block: replace bi_bdev with a gendisk pointer and partitions index") Cc: stable@vger.kernel.org Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-01ceph: fix potential memory leak in init_caches()Chengguang Xu
There is lack of cache destroy operation for ceph_file_cachep when failing from fscache register. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-03-01mq-deadline: Make sure to always unlock zonesDamien Le Moal
In case of a failed write request (all retries failed) and when using libata, the SCSI error handler calls scsi_finish_command(). In the case of blk-mq this means that scsi_mq_done() does not get called, that blk_mq_complete_request() does not get called and also that the mq-deadline .completed_request() method is not called. This results in the target zone of the failed write request being left in a locked state, preventing that any new write requests are issued to the same zone. Fix this by replacing the .completed_request() method with the .finish_request() method as this method is always called whether or not a request completes successfully. Since the .finish_request() method is only called by the blk-mq core if a .prepare_request() method exists, add a dummy .prepare_request() method. Fixes: 5700f69178e9 ("mq-deadline: Introduce zone locking support") Cc: Hannes Reinecke <hare@suse.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> [ bvanassche: edited patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-02kconfig: add xstrdup() helperMasahiro Yamada
We already have xmalloc(), xcalloc(), and xrealloc((). Add xstrdup() as well to save tedious error handling. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02kbuild: disable sparse warnings about unknown attributesLuc Van Oostenryck
Currently, sparse issues warnings on code using an attribute it doesn't know about. One of the problem with this is that these warnings have no value for the developer, it's just noise for him. At best these warnings tell something about some deficiencies of sparse itself but not about a potential problem with code analyzed. A second problem with this is that sparse release are, alas, less frequent than new attributes are added to GCC. So, avoid the noise by asking sparse to not warn about attributes it doesn't know about. Reference: https://marc.info/?l=linux-sparse&m=151871600016790 Reference: https://marc.info/?l=linux-sparse&m=151871725417322 Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02Makefile: Fix lying comment re. silentoldconfigUlf Magnusson
The comment above the silentoldconfig invocation is outdated. 'make oldconfig' updates just .config and doesn't touch the include/config/ tree. This came up in https://lkml.org/lkml/2018/2/12/415. While fixing the comment, make it more informative by explaining the purpose of the unfortunately named silentoldconfig. I can't make sense of the comment re. auto.conf.cmd and a cleaned tree. include/config/auto.conf and include/config/auto.conf.cmd are both created simultaneously by silentoldconfig (in scripts/kconfig/confdata.c, by conf_write_autoconf()), and nothing seems to remove auto.conf.cmd that wouldn't remove auto.conf. Remove that part of the comment rather than blindly copying it. It might be a leftover from an older way of doing things. The include/config/auto.conf.cmd prerequisite might be there to ensure that silentoldconfig gets rerun if conf_write_autoconf() fails between writing out auto.conf.cmd and auto.conf (a comment in the function indicates that auto.conf is deliberately written out last to mark completion of the operation). It seems the Makefile dependency between include/config/auto.conf and .config would already take care of that though, since include/config/auto.conf would still be out of date re. .config if the operation fails. Cop out and leave the prerequisite in for now. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-01Btrfs: fix log replay failure after unlink and link combinationFilipe Manana
If we have a file with 2 (or more) hard links in the same directory, remove one of the hard links, create a new file (or link an existing file) in the same directory with the name of the removed hard link, and then finally fsync the new file, we end up with a log that fails to replay, causing a mount failure. Example: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/testdir $ touch /mnt/testdir/foo $ ln /mnt/testdir/foo /mnt/testdir/bar $ sync $ unlink /mnt/testdir/bar $ touch /mnt/testdir/bar $ xfs_io -c "fsync" /mnt/testdir/bar <power failure> $ mount /dev/sdb /mnt mount: mount(2) failed: /mnt: No such file or directory When replaying the log, for that example, we also see the following in dmesg/syslog: [71813.671307] BTRFS info (device dm-0): failed to delete reference to bar, inode 258 parent 257 [71813.674204] ------------[ cut here ]------------ [71813.675694] BTRFS: Transaction aborted (error -2) [71813.677236] WARNING: CPU: 1 PID: 13231 at fs/btrfs/inode.c:4128 __btrfs_unlink_inode+0x17b/0x355 [btrfs] [71813.679669] Modules linked in: btrfs xfs f2fs dm_flakey dm_mod dax ghash_clmulni_intel ppdev pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper evdev psmouse i2c_piix4 parport_pc i2c_core pcspkr sg serio_raw parport button sunrpc loop autofs4 ext4 crc16 mbcache jbd2 zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod ata_generic sd_mod virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel floppy virtio e1000 scsi_mod [last unloaded: btrfs] [71813.679669] CPU: 1 PID: 13231 Comm: mount Tainted: G W 4.15.0-rc9-btrfs-next-56+ #1 [71813.679669] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 [71813.679669] RIP: 0010:__btrfs_unlink_inode+0x17b/0x355 [btrfs] [71813.679669] RSP: 0018:ffffc90001cef738 EFLAGS: 00010286 [71813.679669] RAX: 0000000000000025 RBX: ffff880217ce4708 RCX: 0000000000000001 [71813.679669] RDX: 0000000000000000 RSI: ffffffff81c14bae RDI: 00000000ffffffff [71813.679669] RBP: ffffc90001cef7c0 R08: 0000000000000001 R09: 0000000000000001 [71813.679669] R10: ffffc90001cef5e0 R11: ffffffff8343f007 R12: ffff880217d474c8 [71813.679669] R13: 00000000fffffffe R14: ffff88021ccf1548 R15: 0000000000000101 [71813.679669] FS: 00007f7cee84c480(0000) GS:ffff88023fc80000(0000) knlGS:0000000000000000 [71813.679669] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [71813.679669] CR2: 00007f7cedc1abf9 CR3: 00000002354b4003 CR4: 00000000001606e0 [71813.679669] Call Trace: [71813.679669] btrfs_unlink_inode+0x17/0x41 [btrfs] [71813.679669] drop_one_dir_item+0xfa/0x131 [btrfs] [71813.679669] add_inode_ref+0x71e/0x851 [btrfs] [71813.679669] ? __lock_is_held+0x39/0x71 [71813.679669] ? replay_one_buffer+0x53/0x53a [btrfs] [71813.679669] replay_one_buffer+0x4a4/0x53a [btrfs] [71813.679669] ? rcu_read_unlock+0x3a/0x57 [71813.679669] ? __lock_is_held+0x39/0x71 [71813.679669] walk_up_log_tree+0x101/0x1d2 [btrfs] [71813.679669] walk_log_tree+0xad/0x188 [btrfs] [71813.679669] btrfs_recover_log_trees+0x1fa/0x31e [btrfs] [71813.679669] ? replay_one_extent+0x544/0x544 [btrfs] [71813.679669] open_ctree+0x1cf6/0x2209 [btrfs] [71813.679669] btrfs_mount_root+0x368/0x482 [btrfs] [71813.679669] ? trace_hardirqs_on_caller+0x14c/0x1a6 [71813.679669] ? __lockdep_init_map+0x176/0x1c2 [71813.679669] ? mount_fs+0x64/0x10b [71813.679669] mount_fs+0x64/0x10b [71813.679669] vfs_kern_mount+0x68/0xce [71813.679669] btrfs_mount+0x13e/0x772 [btrfs] [71813.679669] ? trace_hardirqs_on_caller+0x14c/0x1a6 [71813.679669] ? __lockdep_init_map+0x176/0x1c2 [71813.679669] ? mount_fs+0x64/0x10b [71813.679669] mount_fs+0x64/0x10b [71813.679669] vfs_kern_mount+0x68/0xce [71813.679669] do_mount+0x6e5/0x973 [71813.679669] ? memdup_user+0x3e/0x5c [71813.679669] SyS_mount+0x72/0x98 [71813.679669] entry_SYSCALL_64_fastpath+0x1e/0x8b [71813.679669] RIP: 0033:0x7f7cedf150ba [71813.679669] RSP: 002b:00007ffca71da688 EFLAGS: 00000206 [71813.679669] Code: 7f a0 e8 51 0c fd ff 48 8b 43 50 f0 0f ba a8 30 2c 00 00 02 72 17 41 83 fd fb 74 11 44 89 ee 48 c7 c7 7d 11 7f a0 e8 38 f5 8d e0 <0f> ff 44 89 e9 ba 20 10 00 00 eb 4d 48 8b 4d b0 48 8b 75 88 4c [71813.679669] ---[ end trace 83bd473fc5b4663b ]--- [71813.854764] BTRFS: error (device dm-0) in __btrfs_unlink_inode:4128: errno=-2 No such entry [71813.886994] BTRFS: error (device dm-0) in btrfs_replay_log:2307: errno=-2 No such entry (Failed to recover log tree) [71813.903357] BTRFS error (device dm-0): cleaner transaction attach returned -30 [71814.128078] BTRFS error (device dm-0): open_ctree failed This happens because the log has inode reference items for both inode 258 (the first file we created) and inode 259 (the second file created), and when processing the reference item for inode 258, we replace the corresponding item in the subvolume tree (which has two names, "foo" and "bar") witht he one in the log (which only has one name, "foo") without removing the corresponding dir index keys from the parent directory. Later, when processing the inode reference item for inode 259, which has a name of "bar" associated to it, we notice that dir index entries exist for that name and for a different inode, so we attempt to unlink that name, which fails because the inode reference item for inode 258 no longer has the name "bar" associated to it, making a call to btrfs_unlink_inode() fail with a -ENOENT error. Fix this by unlinking all the names in an inode reference item from a subvolume tree that are not present in the inode reference item found in the log tree, before overwriting it with the item from the log tree. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-01Btrfs: fix log replay failure after linking special file and fsyncFilipe Manana
If in the same transaction we rename a special file (fifo, character/block device or symbolic link), create a hard link for it having its old name then sync the log, we will end up with a log that can not be replayed and at when attempting to replay it, an EEXIST error is returned and mounting the filesystem fails. Example scenario: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt $ mkdir /mnt/testdir $ mkfifo /mnt/testdir/foo # Make sure everything done so far is durably persisted. $ sync # Create some unrelated file and fsync it, this is just to create a log # tree. The file must be in the same directory as our special file. $ touch /mnt/testdir/f1 $ xfs_io -c "fsync" /mnt/testdir/f1 # Rename our special file and then create a hard link with its old name. $ mv /mnt/testdir/foo /mnt/testdir/bar $ ln /mnt/testdir/bar /mnt/testdir/foo # Create some other unrelated file and fsync it, this is just to persist # the log tree which was modified by the previous rename and link # operations. Alternatively we could have modified file f1 and fsync it. $ touch /mnt/f2 $ xfs_io -c "fsync" /mnt/f2 <power failure> $ mount /dev/sdc /mnt mount: mount /dev/sdc on /mnt failed: File exists This happens because when both the log tree and the subvolume's tree have an entry in the directory "testdir" with the same name, that is, there is one key (258 INODE_REF 257) in the subvolume tree and another one in the log tree (where 258 is the inode number of our special file and 257 is the inode for directory "testdir"). Only the data of those two keys differs, in the subvolume tree the index field for inode reference has a value of 3 while the log tree it has a value of 5. Because the same key exists in both trees, but have different index, the log replay fails with an -EEXIST error when attempting to replay the inode reference from the log tree. Fix this by setting the last_unlink_trans field of the inode (our special file) to the current transaction id when a hard link is created, as this forces logging the parent directory inode, solving the conflict at log replay time. A new generic test case for fstests was also submitted. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-01Btrfs: send, fix issuing write op when processing hole in no data modeFilipe Manana
When doing an incremental send of a filesystem with the no-holes feature enabled, we end up issuing a write operation when using the no data mode send flag, instead of issuing an update extent operation. Fix this by issuing the update extent operation instead. Trivial reproducer: $ mkfs.btrfs -f -O no-holes /dev/sdc $ mkfs.btrfs -f /dev/sdd $ mount /dev/sdc /mnt/sdc $ mount /dev/sdd /mnt/sdd $ xfs_io -f -c "pwrite -S 0xab 0 32K" /mnt/sdc/foobar $ btrfs subvolume snapshot -r /mnt/sdc /mnt/sdc/snap1 $ xfs_io -c "fpunch 8K 8K" /mnt/sdc/foobar $ btrfs subvolume snapshot -r /mnt/sdc /mnt/sdc/snap2 $ btrfs send /mnt/sdc/snap1 | btrfs receive /mnt/sdd $ btrfs send --no-data -p /mnt/sdc/snap1 /mnt/sdc/snap2 \ | btrfs receive -vv /mnt/sdd Before this change the output of the second receive command is: receiving snapshot snap2 uuid=f6922049-8c22-e544-9ff9-fc6755918447... utimes write foobar, offset 8192, len 8192 utimes foobar BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=f6922049-8c22-e544-9ff9-... After this change it is: receiving snapshot snap2 uuid=564d36a3-ebc8-7343-aec9-bf6fda278e64... utimes update_extent foobar: offset=8192, len=8192 utimes foobar BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=564d36a3-ebc8-7343-aec9-bf6fda278e64... Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-01btrfs: use proper endianness accessors for super_copyAnand Jain
The fs_info::super_copy is a byte copy of the on-disk structure and all members must use the accessor macros/functions to obtain the right value. This was missing in update_super_roots and in sysfs readers. Moving between opposite endianness hosts will report bogus numbers in sysfs, and mount may fail as the root will not be restored correctly. If the filesystem is always used on a same endian host, this will not be a problem. Fix this by using the btrfs_set_super...() functions to set fs_info::super_copy values, and for the sysfs, use the cached fs_info::nodesize/sectorsize values. CC: stable@vger.kernel.org Fixes: df93589a17378 ("btrfs: export more from FS_INFO to sysfs") Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-01btrfs: alloc_chunk: fix DUP stripe size handlingHans van Kranenburg
In case of using DUP, we search for enough unallocated disk space on a device to hold two stripes. The devices_info[ndevs-1].max_avail that holds the amount of unallocated space found is directly assigned to stripe_size, while it's actually twice the stripe size. Later on in the code, an unconditional division of stripe_size by dev_stripes corrects the value, but in the meantime there's a check to see if the stripe_size does not exceed max_chunk_size. Since during this check stripe_size is twice the amount as intended, the check will reduce the stripe_size to max_chunk_size if the actual correct to be used stripe_size is more than half the amount of max_chunk_size. The unconditional division later tries to correct stripe_size, but will actually make sure we can't allocate more than half the max_chunk_size. Fix this by moving the division by dev_stripes before the max chunk size check, so it always contains the right value, instead of putting a duct tape division in further on to get it fixed again. Since in all other cases than DUP, dev_stripes is 1, this change only affects DUP. Other attempts in the past were made to fix this: * 37db63a400 "Btrfs: fix max chunk size check in chunk allocator" tried to fix the same problem, but still resulted in part of the code acting on a wrongly doubled stripe_size value. * 86db25785a "Btrfs: fix max chunk size on raid5/6" unintentionally broke this fix again. The real problem was already introduced with the rest of the code in 73c5de0051. The user visible result however will be that the max chunk size for DUP will suddenly double, while it's actually acting according to the limits in the code again like it was 5 years ago. Reported-by: Naohiro Aota <naohiro.aota@wdc.com> Link: https://www.spinics.net/lists/linux-btrfs/msg69752.html Fixes: 73c5de0051 ("btrfs: quasi-round-robin for chunk allocation") Fixes: 86db25785a ("Btrfs: fix max chunk size on raid5/6") Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update comment ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-01btrfs: Handle btrfs_set_extent_delalloc failure in relocate_file_extent_clusterNikolay Borisov
Essentially duplicate the error handling from the above block which handles the !PageUptodate(page) case and additionally clear EXTENT_BOUNDARY. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-01btrfs: handle failure of add_pending_csumsNikolay Borisov
add_pending_csums was added as part of the new data=ordered implementation in e6dcd2dc9c48 ("Btrfs: New data=ordered implementation"). Even back then it called the btrfs_csum_file_blocks which can fail but it never bothered handling the failure. In ENOMEM situation this could lead to the filesystem failing to write the checksums for a particular extent and not detect this. On read this could lead to the filesystem erroring out due to crc mismatch. Fix it by propagating failure from add_pending_csums and handling them. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-01btrfs: use kvzalloc to allocate btrfs_fs_infoJeff Mahoney
The srcu_struct in btrfs_fs_info scales in size with NR_CPUS. On kernels built with NR_CPUS=8192, this can result in kmalloc failures that prevent mounting. There is work in progress to try to resolve this for every user of srcu_struct but using kvzalloc will work around the failures until that is complete. As an example with NR_CPUS=512 on x86_64: the overall size of subvol_srcu is 3460 bytes, fs_info is 6496. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-01platform/x86: intel-hid: Reset wakeup capable flag on removalRafael J. Wysocki
The intel-hid device will not be able to wake up the system any more after removing the notify handler provided by its driver, so make its sysfs attributes reflect that. Fixes: ef884112e55c (platform: x86: intel-hid: Wake up the system from suspend-to-idle) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-03-01platform/x86: intel-vbtn: Reset wakeup capable flag on removalRafael J. Wysocki
The intel-vbtn device will not be able to wake up the system any more after removing the notify handler provided by its driver, so make its sysfs attributes reflect that. Fixes: 91f9e850d465 (platform: x86: intel-vbtn: Wake up the system from suspend-to-idle) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 10:53:07 +0000