summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-22dmaengine: omap: Add support for pause/resume in cyclic dma modePeter Ujfalusi
The audio stack used omap_stop_dma/omap_start_dma to pause/resume the DMA. This method has been used for years on OMAP based products. We only allow pause/resume when the DMA has been configured in cyclic mode which is used by the audio stack. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22dmaengine: omap: Support for element mode in cyclic DMAPeter Ujfalusi
When src_maxburst/dst_maxburst is set to 0 by the users of cyclic DMA (mostly audio) indicates that we should configure the omap DMA to element sync mode instead of packet mode. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: fsl: register the wm9712-codecEric Millbrandt
The mpc5200-psc-ac97 driver does not enumerate attached ac97 devices, so register the device here. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: fsl: pcm030-audio-fabric use snd_soc_register_cardEric Millbrandt
Convert pcm030-audio-fabric to use the new snd_soc_register_card api instead of the older method of registering a separate platform device. Create the dai_link to the mpc5200_psc_ac97 platform using the device tree. Convert the pcm030-audio-fabric driver to a platform-driver and add a remove function. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: fsl: add PPC_MPC52xx dependency to SND_POWERPC_SOCEric Millbrandt
mpc52xx socs do not define FSL_SOC but need SND_POWERPC_SOC defined to build ASoC drivers. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: twl6040: Convert to use DAI DAPM widgetsPeter Ujfalusi
Use DAPM mapping for stream events and give unique names for the streams. This change also fixes the following warning: twl6040-codec twl6040-codec: Failed to create Capture debugfs file Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: twl4030: Convert to use DAI DAPM widgetsPeter Ujfalusi
Use DAPM mapping for stream events and give unique names for the streams. This change also fixes the following warning: twl4030-codec twl4030-codec: Failed to create Capture debugfs file Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-21ASoC: wm8960: remove 'dres' field from platform data structureTimur Tabi
The 'dres' field (discharge resistance for headphone outputs) is no longer used in the driver, so remove it. It was used in the original version of the driver when entering standby from off, but we stopped using it when we switched from having a single startup sequence to having separate cap and capless sequences. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-18ASoC: wm8961: Move device identification and reset to I2C probeMark Brown
This is more idiomatic as it means we verify that the device is there prior to trying to do the card probe. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-18ASoC: wm8961: Convert to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-18ASoC: wm8960: Support shared LRCLKMark Brown
If the LRCLK is shared and the WM8960 is clock master then we should enable the LRCM bit to tell the device that it should drive LRCLK when either ADC or DAC is enabled rather than separately driving the two LRCLKs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-18ASoC: wm8776: Convert to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-18ASoC: fsl: cleanup headers in pcm030-audio-fabricEric Millbrandt
Remove unreferenced header files. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-18ASoC: fsl: mpc5200 add missing information to snd_soc_dai_driverEric Millbrandt
Add missing dai_driver information to avoid these runtime errors [ 16.433788] asoc: error - multiple DAI f0002c00.i2s registered with no name [ 16.453551] Failed to register DAI [ 16.461222] mpc5200-psc-i2s: probe of f0002c00.i2s failed with error -22 [ 16.475242] asoc: error - multiple DAI f0002000.ac97 registered with no name [ 16.488087] mpc5200-psc-ac97 f0002000.ac97: Failed to register DAI [ 16.502222] mpc5200-psc-ac97: probe of f0002000.ac97 failed with error -22 Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-18ASoC: fsl: mpc5200 combine psc_dma platform dataEric Millbrandt
The mpc5200_psc_ac97 and mpc5200_psc_i2s modules rely on shared platform data with mpc5200_dma. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-18ASoC: imx-audmux: remove null check of audmux_base in audmux_read_fileRichard Zhao
When audmux_read_file is called, it means the driver is already initialised successfully, so we don't need to check audmux_base. It also fix smatch warning: sound/soc/fsl/imx-audmux.c:78 audmux_read_file() warn: possible memory leak of 'buf' Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-18ASoC: imx-pcm-dma: open function failed when snd_dmaengine_pcm_open failRichard Zhao
snd_imx_open should return error code returned by snd_dmaengine_pcm_open. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-18ASoC: imx-pcm-dma: check kzalloc return value in function snd_imx_openRichard Zhao
It fixed smatch warning: sound/soc/fsl/imx-pcm-dma.c:112 snd_imx_open() error: potential null dereference 'dma_data'. (kzalloc returns null) Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-18ASoC: Avoid recalculating the bitmask for SOC_ENUM controlsLars-Peter Clausen
For ENUM controls the bitmask is calculated based on the number of items. Currently this is done each time the control is accessed. And while the performance impact of this should be negligible we can easily do better. The roundup_pow_of_two macro performs the same calculation which is currently done manually, but it is also possible to use this macro with compile time constants and so it can be used to initialize static data. So we can use it to initialize the mask field of a ENUM control during its declaration. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-18ASoC: wm8960: add support for big-endian audio samplesTimur Tabi
PowerPC ASoC drivers frequently use the _BE variants of the SNDRV_PCM_FORMAT macros, so we need to look for those as well. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-18ASoC: fsl: remove unnecessary call to dma_unmap_singleTimur Tabi
Remove a call to dma_unmap_single() from the PowerPC ASoC DMA driver. The buffer is allocated and not actually mapped, so the unmap call doesn't make sense. It was probably left over from some early version of the driver. This bug was unnoticed for so long because the DMA mapping functions normally don't do anything on PowerPC. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-18ASoC: fsl: use snd_soc_register_card to register the cardTimur Tabi
Use snd_soc_register_card() instead of platform_device_alloc("soc-audio") to register the sound card from the machine drivers. The use of platform_device_alloc is deprecated. Although several other drivers still use platform_device_alloc(), the Freescale drivers were not using it to pass driver data. Instead of fixing the driver data usage, it's better to replace the deprecated code. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-17ASoC: mx27vis: retrieve gpio numbers from platform_dataShawn Guo
Rather than including mach/iomux-mx27.h to define gpio numbers and set up the pins, the patch moves all these into machine code and has the gpio numbers passed to driver via platform_data. As the result, we can remove the mach/iomux-mx27.h inclusion from driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-13ASoC: ad1836: Convert to direct regmap usage.Lars-Peter Clausen
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-13ASoC: ad193x: Use managed regmap initLars-Peter Clausen
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-13ASoC: core: Remove useless kfreePeter Senna Tschudin
Remove useless kfree() and clean up code related to the removal. The semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ position p1,p2; expression x; @@ if (x@p1 == NULL) { ... kfree@p2(x); ... return ...; } @unchanged exists@ position r.p1,r.p2; expression e <= r.x,x,e1; iterator I; statement S; @@ if (x@p1 == NULL) { ... when != I(x,...) S when != e = e1 when != e += e1 when != e -= e1 when != ++e when != --e when != e++ when != e-- when != &e kfree@p2(x); ... return ...; } @ok depends on unchanged exists@ position any r.p1; position r.p2; expression x; @@ ... when != true x@p1 == NULL kfree@p2(x); @depends on !ok && unchanged@ position r.p2; expression x; @@ *kfree@p2(x); // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-13ASoC: core: Mark regmap CODEC register maps as dirty when suspendingMark Brown
The core has for a long time had support for marking the register maps of devices dirty when suspending so that they are resynced on resume. Also implement this feature for CODECs using regmap. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-09-12ASoC: arizona: Clarify logging for FLL lock status interruptMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-12ASoC: wm8737: Convert to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-12ASoC: wm8737: Move regulator acquisition to device registrationMark Brown
This is better style as we acquire resources we will need before we go into the ASoC card probe. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-12ASoC: wm8728: Convert to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-12ASoC: wm8711: Convert to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-12ASoC: wm8580: Move regulator acquisition to I2C probeMark Brown
Better style as we get all the resources we need prior to starting the ASoC level probe. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-12ASoC: wm8580: Convert to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-12ASoC: wm8510: Convert to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-12ASoC: wm8991: Convert to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-12ASoC: wm8990: Convert to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-12ASoC: wm8737: Convert to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-12ASoC: wm8728: Convert to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-12ASoC: wm8711: Convert to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-12ASoC: wm8580: Convert to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-12ASoC: wm8510: Convert to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-11ASoC: wm8900: Fix typo of name to wm9700Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-11ASoC: wm8900: Convert to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-11ASoC: wm8900: Convert to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-11Revert "ASoC: AC97 doesn't use regmap by default"Fabio Estevam
Since commit 98d3088e5 (SoC: core: Fix check before defaulting to regmap) , it is not necessary to provide codec->control_data anymore. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-11ASoC: Revert "ASoC: ab8500: Inform SoC Core that we have our own I/O ↵Fabio Estevam
arrangements" Since commit 98d3088e5 (SoC: core: Fix check before defaulting to regmap) , it is not necessary to provide codec->control_data anymore. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-11ASoC: Revert "ASoC: mc13783: Provide codec->control_data"Fabio Estevam
Since commit 98d3088e5 (SoC: core: Fix check before defaulting to regmap) , it is not necessary to provide codec->control_data anymore. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-11ASoC: am3517evm: Remove unused cpu_dai from hw_paramsPeter Ujfalusi
cpu_dai is not in use in this function and just generates warning at compile time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-11ASoC: cs4270: Convert to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Timur Tabi <timur@freescale.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 19:02:37 +0000