summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-08-13TTY: add tty_port_link_deviceJiri Slaby
This is for those drivers which do not have dynamic device creation (do not call tty_port_register_device) and do not want to implement tty->ops->install (will not call tty_port_install). They still have to provide the link somehow though. And this newly added function is exactly to serve that purpose. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-13TTY: tty_port, add some documentationJiri Slaby
I forgot to document tty_port_register_device and tty_port_install when they were added. Fix it now. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-13TTY: automatically create nodes for some driversJiri Slaby
This looks like it was a mistake not to create device nodes for these drivers. Let us create them from now on. It will be necessary to call tty_register_device some way, either by tty_register_driver implicitly or to call tty_register_device proper. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: netdev@vger.kernel.org Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Cc: linux-cris-kernel@axis.com Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-13TTY: use tty_port_register_deviceJiri Slaby
Currently we have no way to assign tty->port while performing tty installation. There are two ways to provide the link tty_struct => tty_port. Either by calling tty_port_install from tty->ops->install or tty_port_register_device called instead of tty_register_device when the device is being set up after connected. In this patch we modify most of the drivers to do the latter. When the drivers use tty_register_device and we have tty_port already, we switch to tty_port_register_device. So we have the tty_struct => tty_port link for free for those. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-13TTY: move cdev_add to tty_register_deviceJiri Slaby
We need the /dev/ node not to be available before we call tty_register_device. Otherwise we might race with open and tty_struct->port might not be available at that time. This is not an issue now, but would be a problem after "TTY: use tty_port_register_device" is applied. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-13TTY: add support for unnumbered device nodesJiri Slaby
This allows drivers like ttyprintk to avoid hacks to create an unnumbered node in /dev. It used to set TTY_DRIVER_DYNAMIC_DEV in flags and call device_create on its own. That is incorrect, because TTY_DRIVER_DYNAMIC_DEV may be set only if tty_register_device is called explicitly. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-13TTY: move allocations to tty_alloc_driverJiri Slaby
So now, that we have flags and know everything needed, keep a promise and move all the tables and ports allocation from tty_register_driver to tty_alloc_driver. Not only that it makes sense, but we need this for tty_port_link_device which needs tty_driver->ports but is to be called before tty_register_driver. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-13TTY: pty, switch to tty_alloc_driverJiri Slaby
Switch to the new driver allocation interface, as this is one of the special call-sites. Here, we need TTY_DRIVER_DYNAMIC_ALLOC to not allocate tty_driver->ports, cdevs and potentially other structures because we reserve too many lines in pty. Instead, it provides the tty_port<->tty_struct link in tty->ops->install already. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10TTY: pass flags to alloc_tty_driverJiri Slaby
We need to allow drivers that use neither tty_port_install nor tty_port_register_device to link a tty_port to a tty somehow. To avoid a race with open, this has to be performed before tty_register_device. But currently tty_driver->ports is allocated even in tty_register_device because we do not know whether this is the PTY driver. The PTY driver is special here due to an excessive count of lines it declares to handle. We cannot handle tty_ports there this way. To circumvent this, we start passing tty_driver flags to alloc_tty_driver already and we create tty_alloc_driver for this purpose. There we can allocate tty_driver->ports and do all the magic between tty_alloc_driver and tty_register_device. Later we will introduce tty_port_link_device function for that purpose. All drivers should eventually switch to this new tty driver allocation interface. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10TTY: tty3270, free tty driver properlyJiri Slaby
On module unload, in tty3270_exit, we forgot to free the tty driver. Add there a call to put_tty_driver. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10TTY: ttyprintk, initialize tty_port earlierJiri Slaby
After tty_register_driver is called, it is too late to initialize a guy with which we operate in open. When a process already called open(2) on that node, the structures may be in use uninitialized. Move the initialization prior to tty_register_driver. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Samo Pogacnik <samo_pogacnik@t-2.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10TTY: ttyprintk, don't touch behind tty->write_bufJiri Slaby
If a user provides a buffer larger than a tty->write_buf chunk and passes '\r' at the end of the buffer, we touch an out-of-bound memory. Add a check there to prevent this. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: stable@vger.kernel.org (everything maintained past v2.6.37) Cc: Samo Pogacnik <samo_pogacnik@t-2.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10TTY: ttyprintk, unregister tty driver on failureJiri Slaby
When the tty_printk driver fails to create a node in sysfs, the system crashes. It is because the driver registers a tty driver and frees it without deregistering it first. The fix is easy: add a call to tty_unregister_driver to the fail path. This is very unlikely to happen in usual environment => no need for stable. The crash occurs at some place where we iterate over tty drivers first. It may look like this: BUG: unable to handle kernel paging request at ffffffffffffff84 IP: [<ffffffff81278d56>] tty_open+0xd6/0x650 PGD 1a0d067 PUD 1a0e067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: CPU 0 Pid: 1183, comm: boot.localnet Tainted: G W 3.5.0-rc7-next-20120716+ #369 Bochs Bochs RIP: 0010:[<ffffffff81278d56>] [<ffffffff81278d56>] tty_open+0xd6/0x650 RSP: 0018:ffff8800162b3b98 EFLAGS: 00010207 RAX: 0000000000000000 RBX: ffff880016ba6200 RCX: 0000000000002208 RDX: 0000000000000000 RSI: 00000000000000d0 RDI: ffffffff81a35080 RBP: ffff8800162b3c08 R08: ffffffff81276f42 R09: 0000000000400040 R10: ffff8800161dc005 R11: ffff8800188ee048 R12: 0000000000000000 R13: ffffffffffffff58 R14: 0000000000400040 R15: 0000000000008000 FS: 00007f3684abd700(0000) GS:ffff880018e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffff84 CR3: 000000001503e000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process boot.localnet (pid: 1183, threadinfo ffff8800162b2000, task ffff8800188c5880) Stack: ffff8800162b3c08 ffffffff81363d63 ffffffff81a62940 ffff8800189b4e88 ffff8800188c5880 ffffffff81123180 0000000000000000 ffffffff18b20600 0000000000000000 ffff8800189b4e88 ffff880016ba6200 ffff880018b20600 Call Trace: [<ffffffff81363d63>] ? kobj_lookup+0x103/0x160 [<ffffffff81123180>] ? mount_fs+0x110/0x110 [<ffffffff81123a9c>] chrdev_open+0x9c/0x1a0 [<ffffffff81123a00>] ? cdev_put+0x30/0x30 [<ffffffff8111de76>] do_dentry_open.isra.19+0x1e6/0x270 [<ffffffff8111df65>] finish_open+0x65/0xa0 [<ffffffff8112dc9e>] do_last.isra.52+0x26e/0xd80 [<ffffffff8112b163>] ? inode_permission+0x13/0x50 [<ffffffff8112b203>] ? link_path_walk+0x63/0x940 [<ffffffff8112e85b>] path_openat+0xab/0x3d0 [<ffffffff8112ef5d>] do_filp_open+0x3d/0xa0 [<ffffffff8113ba72>] ? alloc_fd+0xd2/0x120 [<ffffffff8111eee3>] do_sys_open+0xf3/0x1d0 [<ffffffff8111efdc>] sys_open+0x1c/0x20 [<ffffffff815b5fe2>] system_call_fastpath+0x16/0x1b Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Samo Pogacnik <samo_pogacnik@t-2.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10mxser: allow overlapping vectorJiri Slaby
For many cards, this saves some IO space because interrupt status port has precedence over the rest of ports on the card. Hence it can be mapped to a hole in I/O ports. Here we add a kernel parameter which allows that if a user wants to. But they need to explicitly enable it by a module parameter. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10misc: pti, use tty_port_register_deviceJiri Slaby
So now we have enough of tty_ports, so we can signal the TTY layer to use them by tty_port_register_device. The upside is that we look like we can introduce tty_port_easy_open and put it directly as tty_operations->open to drivers doing nothing in open and using tty_port_register_device. Because the easy open can obtain a tty_port rather easily from a tty now. Heh, what a nice by-product. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10misc: pti, fix tty_port countJiri Slaby
We now have *one* tty_port for both TTYs. How this was supposed to work? Change it to have a tty_port for each of TTYs. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10misc: pti, fix fail pathsJiri Slaby
Fail paths in ->probe and pti_init are incomplete. Fix that by adding proper clean-up paths. Note that we used to leak tty_driver on module unload. This is fixed here too. tty_unregister_driver needs not retval checking, so remove that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10misc: pti, do the opposite of ->probe in ->removeJiri Slaby
Currently, probe initializes some parts. Then, some of them are unwound in ->remove, some in module_exit. Let us do the opposite of whole ->probe in ->remove. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10misc: pti, move ->remove to the PCI codeJiri Slaby
The function is lost somewhere in the forest. Move it to have it along with probe and other pci_driver stuff. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10misc: pti, stop using iomap's unmap on ioremap spaceJiri Slaby
Ioremap space is different to iomap. ->probe function uses ioremap, but ->remove calls pci_iounmap. That one is illegal. Fix that by using iounmap. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10misc: pti, pci drvdata cannot be NULL in ->removeJiri Slaby
As we set drvdata unconditionally in ->probe, we need not check if it is NULL. Let us remove the check. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10misc: pti, add const to pci_device_id tableJiri Slaby
It is annotated as __devinitconst. Despite the annotation is useless in most cases, const keyword is misssing there. So we are placing non-const data into rodata section. Fix that now. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10TTY: n_gsm, use tty_port_installJiri Slaby
We need to link a port to a tty in install. And since dlci is allocated even in open, we need to create gsmtty_install, allocate dlci there and create also the link. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10TTY: 68328serial, fix compilationJiri Slaby
tty_struct->termios is no longer a pointer. This was changed recently by "tty: move the termios object into the tty". But 68328serial was not changed, so we now have a compilation error: 68328serial.c: In function 'change_speed': 68328serial.c:518:22: error: invalid type argument of '->' (have 'struct ktermios') 68328serial.c: In function 'rs_set_ldisc': 68328serial.c:620:31: error: invalid type argument of '->' (have 'struct ktermios') 68328serial.c: In function 'rs_set_termios': 68328serial.c:988:20: error: invalid type argument of '->' (have 'struct ktermios') Fix that now. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10TTY: pty, stop passing NULL to free_tty_structJiri Slaby
In case alloc_tty_struct fails in pty_common_install, we pass NULL to free_tty_struct. This is invalid as the function is not ready to cope with that. And even if it was, it is not nice to do that anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10n_tty: Don't lose characters when PARMRK is enabledJaeden Amero
When PARMRK is set and large transfers of characters that will get marked are being received, n_tty could drop data silently (i.e. without reporting any error to the client). This is because characters have the potential to take up to three bytes in the line discipline (when they get marked with parity or framing errors), but the amount of free space reported to tty_buffer flush_to_ldisc (via tty->receive_room) is based on the pre-marked data size. With this patch, the n_tty layer will no longer assume that each byte will only take up one byte in the line discipline. Instead, it will make an overly conservative estimate that each byte will take up three bytes in the line discipline when PARMRK is set. Signed-off-by: Jaeden Amero <jaeden.amero@ni.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10tty: Fix possible race in n_tty_read()Stanislav Kozina
Fix possible panic caused by unlocked access to tty->read_cnt in while-loop condition in n_tty_read(). Signed-off-by: Stanislav Kozina <skozina@redhat.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10ipoctal: make it compile with the termios changesAlan Cox
Also fix the silly speed setting bug. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10tty: localise the lockAlan Cox
The termios and other changes mean the other protections needed on the driver tty arrays should be adequate. Turn it all back on. This contains pieces folded in from the fixes made to the original patches | From: Geert Uytterhoeven <geert@linux-m68k.org> (fix m68k) | From: Paul Gortmaker <paul.gortmaker@windriver.com> (fix cris) | From: Jiri Kosina <jkosina@suze.cz> (lockdep) | From: Eric Dumazet <eric.dumazet@gmail.com> (lockdep) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10tty: handle NULL parameters in free_tty_struct()Dan Carpenter
We sometimes pass NULL pointers to free_tty_struct(). One example where it can happen is in the error handling code in pty_common_install(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10tty: fix missing assignmentDan Carpenter
We're trying to save the termios state and we need to allocate a buffer to do it. Smatch complains that the buffer is leaked at the end of the function. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10tty: fix the metro-usb change I messed upAlan Cox
Fixes the leak of a tty kref that Jiri pointed out. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10serqt_usb2: drag screaming into the 21st centuryAlan Cox
Fix the termios stuff but while we are at it do something about the rest of it Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10tty: fix up usb serial console for termios change.Stephen Rothwell
fixes these errors: drivers/usb/serial/console.c: In function 'usb_console_setup': drivers/usb/serial/console.c:168:16: error: invalid type argument of '->' (have 'struct ktermios') drivers/usb/serial/console.c:169:4: error: incompatible type for argument 1 of 'tty_termios_encode_baud_rate' include/linux/tty.h:449:13: note: expected 'struct ktermios *' but argument is of type 'struct ktermios' Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-06Merge tty-next into 3.6-rc1Greg Kroah-Hartman
This handles the merge issue in: arch/um/drivers/line.c arch/um/drivers/line.h And resolves the duplicate patches that were in both trees do to the tty-next branch not getting merged into 3.6-rc1. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-02Linux 3.6-rc1Linus Torvalds
2012-08-02Merge branch 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpcLinus Torvalds
Pull OLPC platform updates from Andres Salomon: "These move the OLPC Embedded Controller driver out of arch/x86/platform and into drivers/platform/olpc. OLPC machines are now ARM-based (which means lots of x86 and ARM changes), but are typically pretty self-contained.. so it makes more sense to go through a separate OLPC tree after getting the appropriate review/ACKs." * 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc: x86: OLPC: move s/r-related EC cmds to EC driver Platform: OLPC: move global variables into priv struct Platform: OLPC: move debugfs support from x86 EC driver x86: OLPC: switch over to using new EC driver on x86 Platform: OLPC: add a suspended flag to the EC driver Platform: OLPC: turn EC driver into a platform_driver Platform: OLPC: allow EC cmd to be overridden, and create a workqueue to call it drivers: OLPC: update various drivers to include olpc-ec.h Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driver
2012-08-02Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc Marvell Orion device-tree updates from Olof Johansson: "This contains a set of device-tree conversions for Marvell Orion platforms that were staged early but took a few tries to get the branch into a format where it was suitable for us to pick up. Given that most people working on these platforms are hobbyists with limited time, we were a bit more flexible with merging it even though it came in late." * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ... Conflicts: drivers/watchdog/orion_wdt.c
2012-08-02Merge tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc cpuidle enablement for OMAP from Olof Johansson: "Coupled cpuidle was meant to merge for 3.5 through Len Brown's tree, but didn't go in because the pull request ended up rejected. So it just got merged, and we got this staged branch that enables the coupled cpuidle code on OMAP. With a stable git workflow from the other maintainer we could have staged this earlier, but that wasn't the case so we have had to merge it late. The alternative is to hold it off until 3.7 but given that the code is well-isolated to OMAP and they are eager to see it go in, I didn't push back hard in that direction." * tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP4: CPUidle: Open broadcast clock-event device. ARM: OMAP4: CPUidle: add synchronization for coupled idle states ARM: OMAP4: CPUidle: Use coupled cpuidle states to implement SMP cpuidle. ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus
2012-08-02Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes for merge window fallout, and a bugfix for timer resume on PRIMA2." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mmp: add missing irqs.h arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes ARM: mxc: Include missing irqs.h header
2012-08-02Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (24 commits) sh: explicitly include sh_dma.h in setup-sh7722.c sh: ecovec: care CN5 VBUS if USB host mode sh: sh7724: fixup renesas_usbhs clock settings sh: intc: initial irqdomain support. sh: pfc: Fix up init ordering mess. serial: sh-sci: fix compilation breakage, when DMA is enabled dmaengine: shdma: restore partial transfer calculation sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757 sh: Fix up recursive fault in oops with unset TTB. sh: pfc: Build fix for pinctrl_remove_gpio_range() changes. sh: select the fixed regulator driver on several boards sh: ecovec: switch MMC power control to regulators sh: add fixed voltage regulators to se7724 sh: add fixed voltage regulators to sdk7786 sh: add fixed voltage regulators to rsk sh: add fixed voltage regulators to migor sh: add fixed voltage regulators to kfr2r09 sh: add fixed voltage regulators to ap325rxa sh: add fixed voltage regulators to sh7757lcr sh: add fixed voltage regulators to sh2007 ...
2012-08-02Merge tag 'md-3.6' of git://neil.brown.name/mdLinus Torvalds
Pull additional md update from NeilBrown: "This contains a few patches that depend on plugging changes in the block layer so needed to wait for those. It also contains a Kconfig fix for the new RAID10 support in dm-raid." * tag 'md-3.6' of git://neil.brown.name/md: md/dm-raid: DM_RAID should select MD_RAID10 md/raid1: submit IO from originating thread instead of md thread. raid5: raid5d handle stripe in batch way raid5: make_request use batch stripe release
2012-08-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull two ceph fixes from Sage Weil: "The first patch fixes up the old crufty open intent code to use the atomic_open stuff properly, and the second fixes a possible null deref and memory leak with the crypto keys." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: fix crypto key null deref, memory leak ceph: simplify+fix atomic_open
2012-08-02Merge tag 'ecryptfs-3.6-rc1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull ecryptfs fixes from Tyler Hicks: - Fixes a bug when the lower filesystem mount options include 'acl', but the eCryptfs mount options do not - Cleanups in the messaging code - Better handling of empty files in the lower filesystem to improve usability. Failed file creations are now cleaned up and empty lower files are converted into eCryptfs during open(). - The write-through cache changes are being reverted due to bugs that are not easy to fix. Stability outweighs the performance enhancements here. - Improvement to the mount code to catch unsupported ciphers specified in the mount options * tag 'ecryptfs-3.6-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: check for eCryptfs cipher support at mount eCryptfs: Revert to a writethrough cache model eCryptfs: Initialize empty lower files when opening them eCryptfs: Unlink lower inode when ecryptfs_create() fails eCryptfs: Make all miscdev functions use daemon ptr in file private_data eCryptfs: Remove unused messaging declarations and function eCryptfs: Copy up POSIX ACL and read-only flags from lower mount
2012-08-02Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull CIFS update from Steve French: "Adds SMB2 rmdir/mkdir capability to the SMB2/SMB2.1 support in cifs. I am holding up a few more days on merging the remainder of the SMB2/SMB2.1 enablement although it is nearing review completion, in order to address some review comments from Jeff Layton on a few of the subsequent SMB2 patches, and also to debug an unrelated cifs problem that Pavel discovered." * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Add SMB2 support for rmdir CIFS: Move rmdir code to ops struct CIFS: Add SMB2 support for mkdir operation CIFS: Separate protocol specific part from mkdir CIFS: Simplify cifs_mkdir call
2012-08-02mm: remove node_start_pfn checking in new WARN_ON for nowLinus Torvalds
Borislav Petkov reports that the new warning added in commit 88fdf75d1bb5 ("mm: warn if pg_data_t isn't initialized with zero") triggers for him, and it is the node_start_pfn field that has already been initialized once. The call trace looks like this: x86_64_start_kernel -> x86_64_start_reservations -> start_kernel -> setup_arch -> paging_init -> zone_sizes_init -> free_area_init_nodes -> free_area_init_node and (with the warning replaced by debug output), Borislav sees On node 0 totalpages: 4193848 DMA zone: 64 pages used for memmap DMA zone: 6 pages reserved DMA zone: 3890 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 798464 pages, LIFO batch:31 Normal zone: 52736 pages used for memmap Normal zone: 3322368 pages, LIFO batch:31 free_area_init_node: pgdat->node_start_pfn: 4423680 <---- On node 1 totalpages: 4194304 Normal zone: 65536 pages used for memmap Normal zone: 4128768 pages, LIFO batch:31 free_area_init_node: pgdat->node_start_pfn: 8617984 <---- On node 2 totalpages: 4194304 Normal zone: 65536 pages used for memmap Normal zone: 4128768 pages, LIFO batch:31 free_area_init_node: pgdat->node_start_pfn: 12812288 <---- On node 3 totalpages: 4194304 Normal zone: 65536 pages used for memmap Normal zone: 4128768 pages, LIFO batch:31 so remove the bogus warning for now to avoid annoying people. Minchan Kim is looking at it. Reported-by: Borislav Petkov <bp@amd64.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-02ARM: mmp: add missing irqs.hHaojian Zhuang
arch/arm/mach-mmp/gplugd.c:195:13: error: ‘MMP_NR_IRQS’ undeclared here (not in a function) make[1]: *** [arch/arm/mach-mmp/gplugd.o] Error 1 Include <mach/irqs.h> to fix this issue. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-08-02arm: mvebu: fix typo in .dtsi comment for Armada XP SoCsThomas Petazzoni
The comment was wrongly referring to Armada 370 while the file is related to Armada XP. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-08-02ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumesBarry Song
The only way to write LATCHED registers to write LATCH_BIT to LATCH register, that will latch COUNTER into LATCHED.e.g. writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); Writing values to LATCHED registers directly is useless at all. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-08-02libceph: fix crypto key null deref, memory leakSylvain Munaut
Avoid crashing if the crypto key payload was NULL, as when it was not correctly allocated and initialized. Also, avoid leaking it. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-23 03:32:50 +0000