summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-07drm/amd/powerplay: update swSMU VCN/JPEG PG logicsEvan Quan
Add lock protections and avoid unnecessary actions if the PG state is already the same as required. Signed-off-by: Evan Quan <evan.quan@amd.com> Tested-by: Matt Coffin <mcoffin13@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-07drm/amdgpu: use mode1 reset by default for sienna_cichlidLikun Gao
Swith default gpu reset method for sienna_cichlid to MODE1 reset. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu/smu: rework i2c adpater registrationAlex Deucher
The i2c init/fini functions just register the i2c adapter. There is no need to call them during hw init/fini. They only need to be called once per driver init/fini. The previous behavior broke runtime pm because we unregistered the i2c adapter during suspend. Tested-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Display goes blank after instIgor Kravchenko
[why] Display goes blank after driver installation. Aux tuning parameters must be used for 2.x only. Wrong dc_golden_table offset was used. [How] Implement a new enc3_hw_init function without VBIOS constants usage to be called for 3.x Calculate dc_golden_table offset using sum of base dce_info offset and golden table offset Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Change null plane state swizzle mode to 4kb_sGeorge Shen
[Why] During SetPathMode and UpdatePlanes, the plane state can be null. We default to linear swizzle mode when plane state is null. This resulted in bandwidth validation failing when trying to set 8K60 mode (which previously passed validation during rebuild timing list). [How] Change the default swizzle mode from linear to 4kb_s and update pitch accordingly. Signed-off-by: George Shen <george.shen@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Use helper function to check for HDMI signalJinZe.Xu
[How] Use dc_is_hdmi_signal to determine signal type. Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: AMD OUI (DPCD 0x00300) skipped on some sinkAric Cyr
[Why] Sink OUI supported cap is not set so driver skips programming it. [How] Revert the change the skips OUI programming if the cap is not set Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Fix logger contextHarry Wentland
[Why&How] use correct logger context Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: populate new dml variableDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Read VBIOS Golden Settings TblIgor Kravchenko
[Why] For ver.4.4 and higher VBIOS contains default setting table. {How] Read Golden Settings Table from VBIOS, apply Aux tuning parameters. Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Use parameter for call to set output muxEric Bernstein
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: enable GFXOFF for navy_flounderJiansong Chen
Enable GFXOFF for navy_flounder. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm amdgpu: Skip tmr load for SRIOVLiu ChengZhe
1. For Navi12, CHIP_SIENNA_CICHLID, skip tmr load operation; 2. Check pointer before release firmware. v2: use CHIP_SIENNA_CICHLID instead v3: remove local "bool ret"; fix grammer issue v4: use my name instead of "root" v5: fix grammer issue and indent issue Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: fix PSP autoload twice in FLRLiu ChengZhe
Assigning false to block->status.hw overwrites PSP's previous hardware status, which causes the PSP to Resume operation after hardware init. Remove this assignment and let the PSP execute Resume operation when it is told to. v2: Remove the braces. v3: Modify the description. Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: update GC golden setting for navy_flounderJiansong Chen
Update GC golden setting for navy_flounder. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: update driver if version for navy_flounderJiansong Chen
It's in accordance with pmfw 65.5.0 for navy_flounder. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: skip crit temperature values on APU (v2)Huang Rui
It doesn't expose PPTable descriptor on APU platform. So max/min temperature values cannot be got from APU platform. v2: Stoney needs to skip crit temperature as well. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Fix DP Compliance tests 4.3.2.1 and 4.3.2.2Aric Cyr
[Why] Test expects that we also read HPD_IRQ_VECTOR when checking for symbol loss as well lane status. [How] Read bytes 0x200-0x205 instead of just 0x202-0x205 Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Use hw lock mgrWyatt Wood
[Why] Feature requires synchronization of dig, pipe, and cursor locking between driver and fw. [How] Set flag to force psr to use hw lock mgr. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: dchubbub p-state warning during surface planes switchhersen wu
[Why] ramp_up_dispclk_with_dpp is to change dispclk, dppclk and dprefclk according to bandwidth requirement. call stack: rv1_update_clocks --> update_clocks --> dcn10_prepare_bandwidth / dcn10_optimize_bandwidth --> prepare_bandwidth / optimize_bandwidth. before change dcn hw, prepare_bandwidth will be called first to allow enough clock, watermark for change, after end of dcn hw change, optimize_bandwidth is executed to lower clock to save power for new dcn hw settings. below is sequence of commit_planes_for_stream: step 1: prepare_bandwidth - raise clock to have enough bandwidth step 2: lock_doublebuffer_enable step 3: pipe_control_lock(true) - make dchubp register change will not take effect right way step 4: apply_ctx_for_surface - program dchubp step 5: pipe_control_lock(false) - dchubp register change take effect step 6: optimize_bandwidth --> dc_post_update_surfaces_to_stream for full_date, optimize clock to save power at end of step 1, dcn clocks (dprefclk, dispclk, dppclk) may be changed for new dchubp configuration. but real dcn hub dchubps are still running with old configuration until end of step 5. this need clocks settings at step 1 should not less than that before step 1. this is checked by two conditions: 1. if (should_set_clock(safe_to_lower , new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) || new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz) 2. request_dpp_div = new_clocks->dispclk_khz > new_clocks->dppclk_khz the second condition is based on new dchubp configuration. dppclk for new dchubp may be different from dppclk before step 1. for example, before step 1, dchubps are as below: pipe 0: recout=(0,40,1920,980) viewport=(0,0,1920,979) pipe 1: recout=(0,0,1920,1080) viewport=(0,0,1920,1080) for dppclk for pipe0 need dppclk = dispclk new dchubp pipe split configuration: pipe 0: recout=(0,0,960,1080) viewport=(0,0,960,1080) pipe 1: recout=(960,0,960,1080) viewport=(960,0,960,1080) dppclk only needs dppclk = dispclk /2. dispclk, dppclk are not lock by otg master lock. they take effect after step 1. during this transition, dispclk are the same, but dppclk is changed to half of previous clock for old dchubp configuration between step 1 and step 6. This may cause p-state warning intermittently. [How] for new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz, we need make sure dppclk are not changed to less between step 1 and 6. for new_clocks->dispclk_khz > clk_mgr_base->clks.dispclk_khz, new display clock is raised, but we do not know ratio of new_clocks->dispclk_khz and clk_mgr_base->clks.dispclk_khz, new_clocks->dispclk_khz /2 does not guarantee equal or higher than old dppclk. we could ignore power saving different between dppclk = displck and dppclk = dispclk / 2 between step 1 and step 6. as long as safe_to_lower = false, set dpclk = dispclk to simplify condition check. CC: Stable <stable@vger.kernel.org> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Allow asic specific FSFT timing optimizationReza Amini
[Why] Each asic can optimize best based on its capabilities [How] Optimizing timing for a new pixel clock Signed-off-by: Reza Amini <Reza.Amini@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Disable idle optimizations before programming DCNJun Lei
[Why] Programming DCN is explicitly forbidden during idle optimzations allowed state. Existing implemenation relies on OS/DM, which is not robust. Instead DC should sequence this. Note that DC will not re-enter idle optimized state on its own, it is only responsible for catching out of sequence calls. It is still DM responsibility to sequence appropriate for optimized power, but this change removes the requirement for DM to cover the .1% case. [How] - elevate updates during idle optimized state to full updates - disable idle power optimizations prior to programming Signed-off-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Fix dmesg warning from setting abm levelStylon Wang
[Why] Setting abm level does not correctly update CRTC state. As a result no surface update is added to dc stream state and triggers warning. [How] Correctly update CRTC state when setting abm level property. CC: Stable <stable@vger.kernel.org> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Use proper abm/backlight functions for DCN3Bhawanpreet Lakha
Use DCN21 functions instead of DCE110 Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Use seperate dmcub firmware for navy_flounderBhawanpreet Lakha
[Why] Currently navy_flounder is using sienna_cichlid_dmcub.bin. [How] Create a seperate define so navy_flounder will use its own firmware. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Check lane status again after link training doneMartin Tsai
[Why] Some monitors could suffer symbol unlock but cannot send HPD IRQ to notic source device to handle link loss. This makes monitor stuck in abnormal status and causes black screen. [How] According to the suggestion from scalar vendor, to check lane status again after link training done. That can improve the comaptibility from current production monitors. Signed-off-by: Martin Tsai <martin.tsai@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Don't compare dppclk before updating DTOAlvin Lee
[Why] In dcn3_update_clocks there are situations where dppclk is not lowered (i.e. stays the same), but DTO still needs to be increased before we program pipe frontend (i.e. in prepare_bandwidth). If we don't program the new DTO value before we program the pipe, we will underflow as soon as the pipe lock is released until the next call to dcn3_update_clocks where the DTO is updated. [How] Remove dppclk check before programming new DTO value. Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Fix naming of DSC Debugfs entryEryk Brol
[why] Fix naming and return bits rather than bytes per pixel for naming consistency. Because registers return Bytes per pixel, but DSC Config structure is expecting bits per pixel as input. So when returning the value convert from bytes into bits. Signed-off-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Rename bytes_pp to the correct bits_ppEryk Brol
[Why] Struct dcn_dsc_state is used for reading current state and parameters of DSC on a pipe, the target rate parameter uses bytes per pixel even though its reading BITS_PER_PIXEL register. [How] Changing it to Bits Per Pixel for consistency. Signed-off-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Clean up global sync param retrievalDmytro Laktyushkin
[Why] This change replaces older looping code in favor of these functions. [How] There are built in functions for extracting global sync params during mode validation now. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/swsmu: allow asic to handle sensor type by itselfKevin Wang
1. allow asic to handle sensor type by itself. 2. if not, use smu common sensor to handle it. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: off by one bugs in smu_cmn_to_asic_specific_index()Dan Carpenter
These tables have _COUNT number of elements so the comparisons should be >= instead of > to prevent reading one element beyond the end of the array. Fixes: 8264ee69f0d8 ("drm/amd/powerplay: drop unused code") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: update driver if file for sienna_cichlidLikun Gao
Update sienna_cichlid driver if header and related files. Support new smu metrics for pre & postDS frequency. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: drop unnecessary message support check(v2)Changfeng
Take back patch:drop unnecessary message support check Because the gpu reset fail problem on renoir can be fixed by: drm/amd/powerplay: skip invalid msg when smu set mp1 state It needs to remove SWSMU_CODE_LAYER_L1 in smu_cmn.h to guard a clear code layer. Signed-off-by: changfeng <Changfeng.Zhu@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: update dec ring test for VCN 3.0Boyuan Zhang
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu/jpeg3.0: remove extra asic type checkJames Zhu
jpeg ip block is already selected based on ASIC type during set_ip_blocks. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: update golden setting for sienna_cichlidLikun Gao
Update golden setting for sienna_cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: correct smu message for vf modeLikun Gao
Set valid_in_vf to false for the message not support in vf mode on sienna cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: add msg map for mode1 resetLikun Gao
Mapping Mode1Reset message for sienna_cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: skip invalid msg when smu set mp1 stateLikun Gao
Some asic may not support for some message of set mp1 state. If the return value of smu_send_smc_msg is -EINVAL, that means it failed to send msg to smc as it can not map an valid message for the ASIC. And with that case, smu_set_mp1_state should be skipped as those ASIC was in fact do not support for that. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/powerplay: remove the dpm checking in the boot sequenceKenneth Feng
It's not necessary to retrieve the power features status when the asic is booted up the first time. This patch can have the features enablement status still checked in suspend/resume case and removed from the first boot up sequence. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06Revert "drm/amd/powerplay: drop unnecessary message support check"Changfeng
The below 3 messages are not supported on Renoir SMU_MSG_PrepareMp1ForShutdown SMU_MSG_PrepareMp1ForUnload SMU_MSG_PrepareMp1ForReset It needs to revert patch: drm/amd/powerplay: drop unnecessary message support check to avoid set mp1 state fail during gpu reset on renoir. Signed-off-by: changfeng <Changfeng.Zhu@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: add printing after executing page reservation to eepromGuchun Chen
This will tell users if the faulty page has been written to external eeprom device in dmesg log. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: expand sienna chichlid reg access supportJohn Clements
Added dedicated 64bit reg read/write support Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amdgpu: fix spelling mistake "Falied" -> "Failed"Colin Ian King
There is a spelling mistake in a DRM_ERROR error message. Fix it. This got lost in a merge, restore the fix. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 4afaa61db9cf5250b5734c2531b226e7b3a3d691)
2020-08-05Merge tag 'drm-msm-next-2020-07-30' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Take 2 of msm-next pull, this version drops the OPP patch due to [1], so I'll send the gpu opp/bw scaling patch after the OPP patch lands. Since I had to force-push I took the opportunity to rebase on drm-next, and since you already merged in 5.8-rc6 a few fixes from the last cycle dropped out. This time around: * A bunch more a650/a640 (sm8150/sm8250) display and GPU enablement and fixes * Enable dpu dither block for 6bpc panels * dpu suspend fixes * dpu fix for cursor on 2nd display * dsi/mdp5 enablement for sdm630/sdm636/sdm660 I also regenerated the register headers, which accounts for a good bit of the size this time, because we hadn't re-synced the register headers since the early days of a6xx bringup. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGs_eswoX-E0Ddg5DoEQy35x3GG+6SDXUAjPMrtAWFkqng@mail.gmail.com
2020-07-31drm/msm: use kthread_create_worker instead of kthread_runBernard
Use kthread_create_worker to simplify the code and optimise the manager struct: msm_drm_thread. With this change, we could remove struct element (struct task_struct *thread & struct kthread_worker worker), instead, use one point (struct kthread_worker *worker). Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-07-31drm/msm/mdp5: Add MDP5 configuration for SDM636/660Konrad Dybcio
This commit adds support for the MDP5 IP on Snapdragon 636/660. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-07-31drm/msm/dsi: Add DSI configuration for SDM660Konrad Dybcio
This also applies to sdm630/636 and their SDA counterparts. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-07-31drm/msm/mdp5: Add MDP5 configuration for SDM630Konrad Dybcio
This commit adds support for the MDP5 IP on Snapdragon 630. The configuration is different from SDM660's, as the latter one has two DSI outputs. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 02:57:08 +0000