summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-02-23mm: prevent concurrent unmap_mapping_range() on the same inodeMiklos Szeredi
Michael Leun reported that running parallel opens on a fuse filesystem can trigger a "kernel BUG at mm/truncate.c:475" Gurudas Pai reported the same bug on NFS. The reason is, unmap_mapping_range() is not prepared for more than one concurrent invocation per inode. For example: thread1: going through a big range, stops in the middle of a vma and stores the restart address in vm_truncate_count. thread2: comes in with a small (e.g. single page) unmap request on the same vma, somewhere before restart_address, finds that the vma was already unmapped up to the restart address and happily returns without doing anything. Another scenario would be two big unmap requests, both having to restart the unmapping and each one setting vm_truncate_count to its own value. This could go on forever without any of them being able to finish. Truncate and hole punching already serialize with i_mutex. Other callers of unmap_mapping_range() do not, and it's difficult to get i_mutex protection for all callers. In particular ->d_revalidate(), which calls invalidate_inode_pages2_range() in fuse, may be called with or without i_mutex. This patch adds a new mutex to 'struct address_space' to prevent running multiple concurrent unmap_mapping_range() on the same mapping. [ We'll hopefully get rid of all this with the upcoming mm preemptibility series by Peter Zijlstra, the "mm: Remove i_mmap_mutex lockbreak" patch in particular. But that is for 2.6.39 ] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reported-by: Michael Leun <lkml20101129@newton.leun.net> Reported-by: Gurudas Pai <gurudas.pai@oracle.com> Tested-by: Gurudas Pai <gurudas.pai@oracle.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-23Revert "Bluetooth: Enable USB autosuspend by default on btusb"Linus Torvalds
This reverts commit 556ea928f78a390fe16ae584e6433dff304d3014. Jeff Chua reports that it can cause some bluetooth devices (he mentions an Bluetooth Intermec scanner) to just stop responding after a while with messages like [ 4533.361959] btusb 8-1:1.0: no reset_resume for driver btusb? [ 4533.361964] btusb 8-1:1.1: no reset_resume for driver btusb? from the kernel. See also https://bugzilla.kernel.org/show_bug.cgi?id=26182 for other reports. Reported-by: Jeff Chua <jeff.chua.linux@gmail.com> Reported-by: Andrew Meakovski <meako@bigmir.net> Reported-by: Jim Faulkner <jfaulkne@ccs.neu.edu> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Matthew Garrett <mjg@redhat.com> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Cc: stable@kernel.org (for 2.6.37) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits) Added support for usb ethernet (0x0fe6, 0x9700) r8169: fix RTL8168DP power off issue. r8169: correct settings of rtl8102e. r8169: fix incorrect args to oob notify. DM9000B: Fix PHY power for network down/up DM9000B: Fix reg_save after spin_lock in dm9000_timeout net_sched: long word align struct qdisc_skb_cb data sfc: lower stack usage in efx_ethtool_self_test bridge: Use IPv6 link-local address for multicast listener queries bridge: Fix MLD queries' ethernet source address bridge: Allow mcast snooping for transient link local addresses too ipv6: Add IPv6 multicast address flag defines bridge: Add missing ntohs()s for MLDv2 report parsing bridge: Fix IPv6 multicast snooping by correcting offset in MLDv2 report bridge: Fix IPv6 multicast snooping by storing correct protocol type p54pci: update receive dma buffers before and after processing fix cfg80211_wext_siwfreq lock ordering... rt2x00: Fix WPA TKIP Michael MIC failures. ath5k: Fix fast channel switching tcp: undo_retrans counter fixes ...
2011-02-23Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: amd64-agp: fix crash at second module load drm/radeon: fix regression with AA resolve checking drm: drop commented out code and preceding comment drm/vblank: Enable precise vblank timestamps for interlaced and doublescan modes. drm/vblank: Use memory barriers optimized for atomic_t instead of generics. drm/vblank: Use abs64(diff_ns) for s64 diff_ns instead of abs(diff_ns) drm/radeon/kms: align height of fb allocation. Revert "drm/radeon/kms: switch back to min->max pll post divider iteration"
2011-02-23Merge branch 'r8169-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6
2011-02-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: serio/gameport - use 'long' system workqueue Input: synaptics - document 0x0c query Input: tegra-kbc - add function keymap
2011-02-23Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: check if device support discard in xfs_ioc_trim() xfs: prevent leaking uninitialized stack memory in FSGEOMETRY_V1
2011-02-23Added support for usb ethernet (0x0fe6, 0x9700)Shahar Havivi
The device is very similar to (0x0fe6, 0x8101), And works well with dm9601 driver. Signed-off-by: Shahar Havivi <shaharh@redhat.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23r8169: fix RTL8168DP power off issue.Hayes Wang
- fix the RTL8111DP turn off the power when DASH is enabled. - RTL_GIGA_MAC_VER_27 must wait for tx finish before reset. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-23r8169: correct settings of rtl8102e.Hayes Wang
Adjust and remove certain settings of RTL8102E which are for previous chips. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-off-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-23r8169: fix incorrect args to oob notify.Hayes Wang
It results in the wrong point address and influences RTL8168DP. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-23DM9000B: Fix PHY power for network down/upHenry Nestler
DM9000 revision B needs 1 ms delay after PHY power-on. PHY must be powered on by writing 0 into register DM9000_GPR before all other settings will change (see Davicom spec and example code). Remember, that register DM9000_GPR was not changed by reset sequence. Without this fix the FIFO is out of sync and sends wrong data after sequence of "ifconfig ethX down ; ifconfig ethX up". Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23DM9000B: Fix reg_save after spin_lock in dm9000_timeoutHenry Nestler
The spin_lock should hold before reading register. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23net_sched: long word align struct qdisc_skb_cb dataEric Dumazet
netem_skb_cb() does : return (struct netem_skb_cb *)qdisc_skb_cb(skb)->data; Unfortunatly struct qdisc_skb_cb data is not long word aligned, so access to psched_time_t time_to_send uses a non aligned access. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23Input: serio/gameport - use 'long' system workqueueDmitry Torokhov
Commit 8ee294cd9def0004887da7f44b80563493b0a097 converted serio subsystem event handling from using a dedicated thread to using common workqueue. Unfortunately, this regressed our boot times, due to the fact that serio jobs take long time to execute. While the new concurrency managed workqueue code manages long-playing works just fine and schedules additional workers as needed, such works wreck havoc among remaining users of flush_scheduled_work(). To solve this problem let's move serio/gameport works from system_wq to system_long_wq which nobody tries to flush. Reported-and-tested-by: Hernando Torque <pantherchen@versanet.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-23Input: synaptics - document 0x0c queryDmitry Torokhov
Since Synaptics technical writers department is a bit slow releasing updated Synaptics interface guide, let's add some new bits (with their blessing) to the code so that they don't get lost. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-23Drop redundant __param section for CRISv32.Jesper Nilsson
The __param section is already brought in by RODATA above. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-23amd64-agp: fix crash at second module loadFlorian Mickler
The module forgot to sometimes unregister some resources. This fixes Bug #22882. [Patch updated to 2.6.38-rc3 by Randy Dunlap.] Tested-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-22Merge branch 'for-2639-rc4/i2c-fixes' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-2639-rc4/i2c-fixes' of git://git.fluff.org/bjdooks/linux: i2c-omap: fixup commit cb527ede1bf6ff2008a025606f25344b8ed7b4ac whitespace i2c-omap: Double clear of ARDY status in IRQ handler i2c-omap: fix build for !CONFIG_SUSPEND i2c-omap: fix static suspend vs. runtime suspend i2c-stu300: make sure adapter-name is terminated
2011-02-22Merge branch 'usb-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: Revert "USB: Reset USB 3.0 devices on (re)discovery" USB: musb: omap2430: fix kernel panic on reboot sierra: add new ID for Airprime/Sierra USB IP modem USB: serial/usb_wwan, fix tty NULL dereference USB: Reset USB 3.0 devices on (re)discovery USB: Add quirk for Samsung Android phone modem USB: Add Samsung SGH-I500/Android modem ID switch to visor driver USB: add quirks entry for Keytouch QWERTY Panel usb: musb: omap2430: fix kernel panic on reboot usb: musb: fix build breakage
2011-02-23i2c-omap: fixup commit cb527ede1bf6ff2008a025606f25344b8ed7b4ac whitespaceBen Dooks
Fixup the whitespace error noticed in cb527ede1bf6ff2008a025606f25344b8ed7b4ac Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-02-23i2c-omap: Double clear of ARDY status in IRQ handlerRichard woodruff
This errata occurs when the ARDY interrupt generation is enabled. At the begining of every new transaction the ARDY interrupt is cleared. On continuous i2c transactions where after clearing the ARDY bit from I2C_STAT register (clearing the interrupt), the IRQ line is reasserted and the I2C_STAT[ARDY] bit set again on 1. In fact, the ARDY status bit is not cleared at the write access to I2C_STAT[ARDY] and only the IRQ line is deasserted and then reasserted. This is not captured in the usual errata documents. The workaround is to have a double clear of ARDY status in irq handler. Signed-off-by: Richard woodruff <r-woodruff2@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-02-23i2c-omap: fix build for !CONFIG_SUSPENDBalaji T K
fix the build break when !CONFIG_SUSPEND drivers/i2c/busses/i2c-omap.c:1173: error: lvalue required as unary '&' operand make[3]: *** [drivers/i2c/busses/i2c-omap.o] Error 1 make[2]: *** [drivers/i2c/busses] Error 2 make[1]: *** [drivers/i2c] Error 2 make: *** [drivers] Error 2 Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-02-23drm/radeon: fix regression with AA resolve checkingDave Airlie
Some userspaces can emit a whole packet without disabling AA resolve by the looks of it, so we have to deal with them. Signed-off-by: Dave Airlie <airlied@redhat.com> Tested-by: Jorg Otte <jrg.otte@googlemail.com>
2011-02-23drm: drop commented out code and preceding commentPaul Bolle
r100_gpu_init() was dropped in 90aca4d ("drm/radeon/kms: simplify & improve GPU reset V2") but here it was only commented out. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23drm/vblank: Enable precise vblank timestamps for interlaced and doublescan ↵Mario Kleiner
modes. Testing showed the current code can already handle doublescan video modes just fine. A trivial tweak makes it work for interlaced scanout as well. Tested and shown to be precise on Radeon rv530, r600 and Intel 945-GME. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23drm/vblank: Use memory barriers optimized for atomic_t instead of generics.Mario Kleiner
Documentation/atomic_ops.txt tells us that there are memory barriers optimized for atomic_inc and other atomic_t ops. Use these instead of smp_wmb(), and also to make the required memory barriers around vblank counter increments more explicit. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23drm/vblank: Use abs64(diff_ns) for s64 diff_ns instead of abs(diff_ns)Mario Kleiner
Use of abs() wrongly wrapped diff_ns to 32 bit, which gives a 1/4000 probability of a missed vblank increment at each vblank irq reenable if the kms driver doesn't support high precision vblank timestamping. Not a big deal in practice, but let's make it nice. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23drm/radeon/kms: align height of fb allocation.Dave Airlie
this aligns the height of the fb allocation so it doesn't trip over the size checks later when we use this from userspace to copy the buffer at X start. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23Revert "drm/radeon/kms: switch back to min->max pll post divider iteration"Alex Deucher
This reverts commit a6f9761743bf35b052180f4a8bdae4d2cc0465f6. Remove this commit as it is no longer necessary. The relevant bugs were fixed properly in: drm/radeon/kms: hopefully fix pll issues for real (v3) 5b40ddf888398ce4cccbf3b9d0a18d90149ed7ff drm/radeon/kms: add missing frac fb div flag for dce4+ 9f4283f49f0a96a64c5a45fe56f0f8c942885eef This commit also broke certain ~5 Mhz modes on old arcade monitors, so reverting this commit fixes: https://bugzilla.kernel.org/show_bug.cgi?id=29502 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-22i2c-omap: fix static suspend vs. runtime suspendKevin Hilman
When runtime PM is enabled, each OMAP i2c device is suspended after each i2c xfer. However, there are two cases when the static suspend methods must be used to ensure the devices are suspended: 1) runtime PM is disabled, either at compile time or dynamically via /sys/devices/.../power/control. 2) an i2c client driver uses i2c during it's suspend callback, thus leaving the i2c driver active (NOTE: runtime suspend transitions are disabled during system suspend, so i2c activity during system suspend will runtime resume the device, but not runtime (re)suspend it.) Since the actual work to suspend the device is handled by the subsytem, call the bus methods to take care of it. NOTE: This takes care of a known suspend problem on OMAP3 where the TWL RTC driver does i2c xfers during its suspend path leaving the i2c driver in an active state (since runtime suspend transistions are disabled.) Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-02-22i2c-stu300: make sure adapter-name is terminatedWolfram Sang
Use strlcpy instead of strncpy. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-02-22xfs: check if device support discard in xfs_ioc_trim()Lukas Czerner
Right now we, are relying on the fact that when we attempt to actually do the discard, blkdev_issue_discar() returns -EOPNOTSUPP and the user is informed that the device does not support discard. However, in the case where the we do not hit any suitable free extent to trim in FITRIM code, it will finish without any error. This is very confusing, because it seems that FITRIM was successful even though the device does not actually supports discard. Solution: Check for the discard support before attempt to search for free extents. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-02-22xfs: prevent leaking uninitialized stack memory in FSGEOMETRY_V1Dan Rosenberg
The FSGEOMETRY_V1 ioctl (and its compat equivalent) calls out to xfs_fs_geometry() with a version number of 3. This code path does not fill in the logsunit member of the passed xfs_fsop_geom_t, leading to the leaking of four bytes of uninitialized stack data to potentially unprivileged callers. v2 switches to memset() to avoid future issues if structure members change, on suggestion of Dave Chinner. Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> Reviewed-by: Eugene Teo <eugeneteo@kernel.org> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-02-22Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-02-22sfc: lower stack usage in efx_ethtool_self_testEric Dumazet
drivers/net/sfc/ethtool.c: In function ‘efx_ethtool_self_test’: drivers/net/sfc/ethtool.c:613: warning: the frame size of 1200 bytes is larger than 1024 bytes Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Use IPv6 link-local address for multicast listener queriesLinus Lüssing
Currently the bridge multicast snooping feature periodically issues IPv6 general multicast listener queries to sense the absence of a listener. For this, it uses :: as its source address - however RFC 2710 requires: "To be valid, the Query message MUST come from a link-local IPv6 Source Address". Current Linux kernel versions seem to follow this requirement and ignore our bogus MLD queries. With this commit a link local address from the bridge interface is being used to issue the MLD query, resulting in other Linux devices which are multicast listeners in the network to respond with a MLD response (which was not the case before). Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Fix MLD queries' ethernet source addressLinus Lüssing
Map the IPv6 header's destination multicast address to an ethernet source address instead of the MLD queries multicast address. For instance for a general MLD query (multicast address in the MLD query set to ::), this would wrongly be mapped to 33:33:00:00:00:00, although an MLD queries destination MAC should always be 33:33:00:00:00:01 which matches the IPv6 header's multicast destination ff02::1. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Allow mcast snooping for transient link local addresses tooLinus Lüssing
Currently the multicast bridge snooping support is not active for link local multicast. I assume this has been done to leave important multicast data untouched, like IPv6 Neighborhood Discovery. In larger, bridged, local networks it could however be desirable to optimize for instance local multicast audio/video streaming too. With the transient flag in IPv6 multicast addresses we have an easy way to optimize such multimedia traffic without tempering with the high priority multicast data from well-known addresses. This patch alters the multicast bridge snooping for IPv6, to take effect for transient multicast addresses instead of non-link-local addresses. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22ipv6: Add IPv6 multicast address flag definesLinus Lüssing
This commit adds the missing IPv6 multicast address flag defines to complement the already existing multicast address scope defines and to be able to check these flags nicely in the future. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Add missing ntohs()s for MLDv2 report parsingLinus Lüssing
The nsrcs number is 2 Byte wide, therefore we need to call ntohs() before using it. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Fix IPv6 multicast snooping by correcting offset in MLDv2 reportLinus Lüssing
We actually want a pointer to the grec_nsrcr and not the following field. Otherwise we can get very high values for *nsrcs as the first two bytes of the IPv6 multicast address are being used instead, leading to a failing pskb_may_pull() which results in MLDv2 reports not being parsed. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Fix IPv6 multicast snooping by storing correct protocol typeLinus Lüssing
The protocol type for IPv6 entries in the hash table for multicast bridge snooping is falsely set to ETH_P_IP, marking it as an IPv4 address, instead of setting it to ETH_P_IPV6, which results in negative look-ups in the hash table later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: re-enable Zoomed Video support cm4000_cs: Fix undefined ops warning pcmcia vs. MECR on pxa25x/sa1111 drivers/char/pcmcia/ipwireless/main.c: Convert release_resource to release_region/release_mem_region
2011-02-22Merge branch 'irq-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Disable the SHIRQ_DEBUG call in request_threaded_irq for now genirq: Prevent access beyond allocated_irqs bitmap
2011-02-22Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix throttle logic perf, x86: P4 PMU: Fix spurious NMI messages
2011-02-22Merge branch 'fix/asoc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: Ensure supplies are maintained for force enabled widgets ASoC: WM8994: Improve playback robustness ASoC: WM8994: Improve robustness in some use cases ASoC: WM8903: Fix mic detection enable logic ASoC: WM8903: Fix mic detection register definitions ASoC: CX20442: fix wrong reg_cache_default content ASoC: Sync initial widget state with hardware
2011-02-22.gitignore: ignore *.xz filesRomain Francoise
Building with CONFIG_KERNEL_XZ results in the following: # Untracked files: # (use "git add <file>..." to include in what will be committed) # # arch/x86/boot/compressed/vmlinux.bin.xz So ignore xz-compressed files at the top level like we already do for other compression types. Signed-off-by: Romain Francoise <romain@orebokech.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-21Linux 2.6.38-rc6Linus Torvalds
2011-02-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: eCryptfs: Copy up lower inode attrs in getattr ecryptfs: read on a directory should return EISDIR if not supported eCryptfs: Handle NULL nameidata pointers eCryptfs: Revert "dont call lookup_one_len to avoid NULL nameidata"
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 19:35:40 +0000