| Age | Commit message (Collapse) | Author |
|---|
|
bpf selftest test_progs/test_sk_assign failed with llvm 11 and llvm 12.
Compared to llvm 10, llvm 11 and 12 generates xor instruction which
is not handled properly in verifier. The following illustrates the
problem:
16: (b4) w5 = 0
17: ... R5_w=inv0 ...
...
132: (a4) w5 ^= 1
133: ... R5_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ...
...
37: (bc) w8 = w5
38: ... R5=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
R8_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ...
...
41: (bc) w3 = w8
42: ... R3_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ...
45: (56) if w3 != 0x0 goto pc+1
... R3_w=inv0 ...
46: (b7) r1 = 34
47: R1_w=inv34 R7=pkt(id=0,off=26,r=38,imm=0)
47: (0f) r7 += r1
48: R1_w=invP34 R3_w=inv0 R7_w=pkt(id=0,off=60,r=38,imm=0)
48: (b4) w9 = 0
49: R1_w=invP34 R3_w=inv0 R7_w=pkt(id=0,off=60,r=38,imm=0)
49: (69) r1 = *(u16 *)(r7 +0)
invalid access to packet, off=60 size=2, R7(id=0,off=60,r=38)
R7 offset is outside of the packet
At above insn 132, w5 = 0, but after w5 ^= 1, we give a really conservative
value of w5. At insn 45, in reality the condition should be always false.
But due to conservative value for w3, the verifier evaluates it could be
true and this later leads to verifier failure complaining potential
packet out-of-bound access.
This patch implemented proper XOR support in verifier.
In the above example, we have:
132: R5=invP0
132: (a4) w5 ^= 1
133: R5_w=invP1
...
37: (bc) w8 = w5
...
41: (bc) w3 = w8
42: R3_w=invP1
...
45: (56) if w3 != 0x0 goto pc+1
47: R3_w=invP1
...
processed 353 insns ...
and the verifier can verify the program successfully.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200825064608.2017937-1-yhs@fb.com
|
|
There are code paths where EINVAL is returned directly without setting
errno. In that case, errno could be 0, which would mask the
failure. For example, if a careless programmer set log_level to 10000
out of laziness, they would have to spend a long time trying to figure
out why.
Fixes: 4f33ddb4e3e2 ("libbpf: Propagate EPERM to caller on program load")
Signed-off-by: Alex Gartrell <alexgartrell@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200826075549.1858580-1-alexgartrell@gmail.com
|
|
Udip Pant says:
====================
This patch series adds changes in verifier to make decisions such as granting
of read / write access or enforcement of return code status based on
the program type of the target program while using dynamic program
extension (of type BPF_PROG_TYPE_EXT).
The BPF_PROG_TYPE_EXT type can be used to extend types such as XDP, SKB
and others. Since the BPF_PROG_TYPE_EXT program type on itself is just a
placeholder for those, we need this extended check for those extended
programs to actually work with proper access, while using this option.
Patch #1 includes changes in the verifier.
Patch #2 adds selftests to verify write access on a packet for a valid
extension program type
Patch #3 adds selftests to verify proper check for the return code
Patch #4 adds selftests to ensure access permissions and restrictions
for some map types such sockmap.
Changelogs:
v2 -> v3:
* more comprehensive resolution of the program type in the verifier
based on the target program (and not just for the packet access)
* selftests for checking return code and map access
* Also moved this patch to 'bpf-next' from 'bpf' tree
v1 -> v2:
* extraction of the logic to resolve prog type into a separate method
* selftests to check for packet access for a valid freplace prog
====================
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This adds further tests to ensure access permissions and restrictions
are applied properly for some map types such as sock-map.
It also adds another negative tests to assert static functions cannot be
replaced. In the 'unreliable' mode it still fails with error 'tracing progs
cannot use bpf_spin_lock yet' with the change in the verifier
Signed-off-by: Udip Pant <udippant@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825232003.2877030-5-udippant@fb.com
|
|
This adds test to enforce same check for the return code for the extended prog
as it is enforced for the target program. It asserts failure for a
return code, which is permitted without the patch in this series, while
it is restricted after the application of this patch.
Signed-off-by: Udip Pant <udippant@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825232003.2877030-4-udippant@fb.com
|
|
This adds a selftest that tests the behavior when a freplace target program
attempts to make a write access on a packet. The expectation is that the read or write
access is granted based on the program type of the linked program and
not itself (which is of type, for e.g., BPF_PROG_TYPE_EXT).
This test fails without the associated patch on the verifier.
Signed-off-by: Udip Pant <udippant@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825232003.2877030-3-udippant@fb.com
|
|
This patch adds changes in verifier to make decisions such as granting
of read / write access or enforcement of return code status based on
the program type of the target program while using dynamic program
extension (of type BPF_PROG_TYPE_EXT).
The BPF_PROG_TYPE_EXT type can be used to extend types such as XDP, SKB
and others. Since the BPF_PROG_TYPE_EXT program type on itself is just a
placeholder for those, we need this extended check for those extended
programs to actually work with proper access, while using this option.
Specifically, it introduces following changes:
- may_access_direct_pkt_data:
allow access to packet data based on the target prog
- check_return_code:
enforce return code based on the target prog
(currently, this check is skipped for EXT program)
- check_ld_abs:
check for 'may_access_skb' based on the target prog
- check_map_prog_compatibility:
enforce the map compatibility check based on the target prog
- may_update_sockmap:
allow sockmap update based on the target prog
Some other occurrences of prog->type is left as it without replacing
with the 'resolved' type:
- do_check_common() and check_attach_btf_id():
already have specific logic to handle the EXT prog type
- jit_subprogs() and bpf_check():
Not changed for jit compilation or while inferring env->ops
Next few patches in this series include selftests for some of these cases.
Signed-off-by: Udip Pant <udippant@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825232003.2877030-2-udippant@fb.com
|
|
There is a spelling mistake in a check error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200826085907.43095-1-colin.king@canonical.com
|
|
Alexei reported compile breakage on newer systems with
following error:
In file included from /usr/include/fcntl.h:290:0,
4814 from ./test_progs.h:29,
4815 from
.../bpf-next/tools/testing/selftests/bpf/prog_tests/d_path.c:3:
4816In function ‘open’,
4817 inlined from ‘trigger_fstat_events’ at
.../bpf-next/tools/testing/selftests/bpf/prog_tests/d_path.c:50:10,
4818 inlined from ‘test_d_path’ at
.../bpf-next/tools/testing/selftests/bpf/prog_tests/d_path.c:119:6:
4819/usr/include/x86_64-linux-gnu/bits/fcntl2.h:50:4: error: call to
‘__open_missing_mode’ declared with attribute error: open with O_CREAT
or O_TMPFILE in second argument needs 3 arguments
4820 __open_missing_mode ();
4821 ^~~~~~~~~~~~~~~~~~~~~~
We're missing permission bits as 3rd argument
for open call with O_CREAT flag specified.
Fixes: e4d1af4b16f8 ("selftests/bpf: Add test for d_path helper")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200826101845.747617-1-jolsa@kernel.org
|
|
Adding test to for sets resolve_btfids. We're checking that
testing set gets properly resolved and sorted.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-15-jolsa@kernel.org
|
|
Adding test for d_path helper which is pretty much
copied from Wenbo Zhang's test for bpf_get_fd_path,
which never made it in.
The test is doing fstat/close on several fd types,
and verifies we got the d_path helper working on
kernel probes for vfs_getattr/filp_close functions.
Original-patch-by: Wenbo Zhang <ethercflow@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-14-jolsa@kernel.org
|
|
Adding verifier test for attaching tracing program and
calling d_path helper from within and testing that it's
allowed for dentry_open function and denied for 'd_path'
function with appropriate error.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-13-jolsa@kernel.org
|
|
Updating btf.rst doc with info about BTF_SET_START/END macros.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-12-jolsa@kernel.org
|
|
Adding d_path helper function that returns full path for
given 'struct path' object, which needs to be the kernel
BTF 'path' object. The path is returned in buffer provided
'buf' of size 'sz' and is zero terminated.
bpf_d_path(&file->f_path, buf, size);
The helper calls directly d_path function, so there's only
limited set of function it can be called from. Adding just
very modest set for the start.
Updating also bpf.h tools uapi header and adding 'path' to
bpf_helpers_doc.py script.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-11-jolsa@kernel.org
|
|
Adding support to define sorted set of BTF ID values.
Following defines sorted set of BTF ID values:
BTF_SET_START(btf_allowlist_d_path)
BTF_ID(func, vfs_truncate)
BTF_ID(func, vfs_fallocate)
BTF_ID(func, dentry_open)
BTF_ID(func, vfs_getattr)
BTF_ID(func, filp_close)
BTF_SET_END(btf_allowlist_d_path)
It defines following 'struct btf_id_set' variable to access
values and count:
struct btf_id_set btf_allowlist_d_path;
Adding 'allowed' callback to struct bpf_func_proto, to allow
verifier the check on allowed callers.
Adding btf_id_set_contains function, which will be used by
allowed callbacks to verify the caller's BTF ID value is
within allowed set.
Also removing extra '\' in __BTF_ID_LIST macro.
Added BTF_SET_START_GLOBAL macro for global sets.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-10-jolsa@kernel.org
|
|
Adding btf_struct_ids_match function to check if given address provided
by BTF object + offset is also address of another nested BTF object.
This allows to pass an argument to helper, which is defined via parent
BTF object + offset, like for bpf_d_path (added in following changes):
SEC("fentry/filp_close")
int BPF_PROG(prog_close, struct file *file, void *id)
{
...
ret = bpf_d_path(&file->f_path, ...
The first bpf_d_path argument is hold by verifier as BTF file object
plus offset of f_path member.
The btf_struct_ids_match function will walk the struct file object and
check if there's nested struct path object on the given offset.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-9-jolsa@kernel.org
|
|
Adding btf_struct_walk function that walks through the
struct type + given offset and returns following values:
enum bpf_struct_walk_result {
/* < 0 error */
WALK_SCALAR = 0,
WALK_PTR,
WALK_STRUCT,
};
WALK_SCALAR - when SCALAR_VALUE is found
WALK_PTR - when pointer value is found, its ID is stored
in 'next_btf_id' output param
WALK_STRUCT - when nested struct object is found, its ID is stored
in 'next_btf_id' output param
It will be used in following patches to get all nested
struct objects for given type and offset.
The btf_struct_access now calls btf_struct_walk function,
as long as it gets nested structs as return value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-8-jolsa@kernel.org
|
|
Andrii suggested we can simply jump to again label
instead of making recursion call.
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-7-jolsa@kernel.org
|
|
Adding type_id pointer as argument to __btf_resolve_size
to return also BTF ID of the resolved type. It will be
used in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-6-jolsa@kernel.org
|
|
If the resolved type is array, make btf_resolve_size return also
ID of the elem type. It will be needed in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-5-jolsa@kernel.org
|
|
Moving btf_resolve_size into __btf_resolve_size and
keeping btf_resolve_size public with just first 3
arguments, because the rest of the arguments are not
used by outside callers.
Following changes are adding more arguments, which
are not useful to outside callers. They will be added
to the __btf_resolve_size function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-4-jolsa@kernel.org
|
|
The set symbol does not have the unique number suffix,
so we need to give it a special parsing function.
This was omitted in the first batch, because there was
no set support yet, so it slipped in the testing.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-3-jolsa@kernel.org
|
|
To make sure we don't crash on malformed symbols.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-2-jolsa@kernel.org
|
|
The CC_CAN_LINK checks that the host compiler can link, but bpf_preload
relies on libbpf which in turn needs libelf to be present during linking.
allmodconfig runs in odd setups with cross compilers and missing host
libraries like libelf. Instead of extending kconfig with every possible
library that bpf_preload might need disallow building BPF_PRELOAD in
such build-only configurations.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
inode_local_storage:
* Hook to the file_open and inode_unlink LSM hooks.
* Create and unlink a temporary file.
* Store some information in the inode's bpf_local_storage during
file_open.
* Verify that this information exists when the file is unlinked.
sk_local_storage:
* Hook to the socket_post_create and socket_bind LSM hooks.
* Open and bind a socket and set the sk_storage in the
socket_post_create hook using the start_server helper.
* Verify if the information is set in the socket_bind hook.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-8-kpsingh@chromium.org
|
|
Adds support for both bpf_{sk, inode}_storage_{get, delete} to be used
in LSM programs. These helpers are not used for tracing programs
(currently) as their usage is tied to the life-cycle of the object and
should only be used where the owning object won't be freed (when the
owning object is passed as an argument to the LSM hook). Thus, they
are safer to use in LSM hooks than tracing. Usage of local storage in
tracing programs will probably follow a per function based whitelist
approach.
Since the UAPI helper signature for bpf_sk_storage expect a bpf_sock,
it, leads to a compilation warning for LSM programs, it's also updated
to accept a void * pointer instead.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-7-kpsingh@chromium.org
|
|
Similar to bpf_local_storage for sockets, add local storage for inodes.
The life-cycle of storage is managed with the life-cycle of the inode.
i.e. the storage is destroyed along with the owning inode.
The BPF LSM allocates an __rcu pointer to the bpf_local_storage in the
security blob which are now stackable and can co-exist with other LSMs.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-6-kpsingh@chromium.org
|
|
A purely mechanical change:
bpf_sk_storage.c = bpf_sk_storage.c + bpf_local_storage.c
bpf_sk_storage.h = bpf_sk_storage.h + bpf_local_storage.h
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-5-kpsingh@chromium.org
|
|
Refactor the functionality in bpf_sk_storage.c so that concept of
storage linked to kernel objects can be extended to other objects like
inode, task_struct etc.
Each new local storage will still be a separate map and provide its own
set of helpers. This allows for future object specific extensions and
still share a lot of the underlying implementation.
This includes the changes suggested by Martin in:
https://lore.kernel.org/bpf/20200725013047.4006241-1-kafai@fb.com/
adding new map operations to support bpf_local_storage maps:
* storages for different kernel objects to optionally have different
memory charging strategy (map_local_storage_charge,
map_local_storage_uncharge)
* Functionality to extract the storage pointer from a pointer to the
owning object (map_owner_storage_ptr)
Co-developed-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-4-kpsingh@chromium.org
|
|
Provide the a ability to define local storage caches on a per-object
type basis. The caches and caching indices for different objects should
not be inter-mixed as suggested in:
https://lore.kernel.org/bpf/20200630193441.kdwnkestulg5erii@kafai-mbp.dhcp.thefacebook.com/
"Caching a sk-storage at idx=0 of a sk should not stop an
inode-storage to be cached at the same idx of a inode."
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-3-kpsingh@chromium.org
|
|
A purely mechanical change to split the renaming from the actual
generalization.
Flags/consts:
SK_STORAGE_CREATE_FLAG_MASK BPF_LOCAL_STORAGE_CREATE_FLAG_MASK
BPF_SK_STORAGE_CACHE_SIZE BPF_LOCAL_STORAGE_CACHE_SIZE
MAX_VALUE_SIZE BPF_LOCAL_STORAGE_MAX_VALUE_SIZE
Structs:
bucket bpf_local_storage_map_bucket
bpf_sk_storage_map bpf_local_storage_map
bpf_sk_storage_data bpf_local_storage_data
bpf_sk_storage_elem bpf_local_storage_elem
bpf_sk_storage bpf_local_storage
The "sk" member in bpf_local_storage is also updated to "owner"
in preparation for changing the type to void * in a subsequent patch.
Functions:
selem_linked_to_sk selem_linked_to_storage
selem_alloc bpf_selem_alloc
__selem_unlink_sk bpf_selem_unlink_storage_nolock
__selem_link_sk bpf_selem_link_storage_nolock
selem_unlink_sk __bpf_selem_unlink_storage
sk_storage_update bpf_local_storage_update
__sk_storage_lookup bpf_local_storage_lookup
bpf_sk_storage_map_free bpf_local_storage_map_free
bpf_sk_storage_map_alloc bpf_local_storage_map_alloc
bpf_sk_storage_map_alloc_check bpf_local_storage_map_alloc_check
bpf_sk_storage_map_check_btf bpf_local_storage_map_check_btf
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-2-kpsingh@chromium.org
|
|
Currently test_sk_assign failed verifier with llvm11/llvm12.
During debugging, I found the default verifier output is
truncated like below
Verifier analysis:
Skipped 2200 bytes, use 'verb' option for the full verbose log.
[...]
off=23,r=34,imm=0) R5=inv0 R6=ctx(id=0,off=0,imm=0) R7=pkt(id=0,off=0,r=34,imm=0) R10=fp0
80: (0f) r7 += r2
last_idx 80 first_idx 21
regs=4 stack=0 before 78: (16) if w3 == 0x11 goto pc+1
when I am using "./test_progs -vv -t assign".
The reason is tc verbose mode is not enabled.
This patched enabled tc verbose mode and the output looks like below
Verifier analysis:
0: (bf) r6 = r1
1: (b4) w0 = 2
2: (61) r1 = *(u32 *)(r6 +80)
3: (61) r7 = *(u32 *)(r6 +76)
4: (bf) r2 = r7
5: (07) r2 += 14
6: (2d) if r2 > r1 goto pc+61
R0_w=inv2 R1_w=pkt_end(id=0,off=0,imm=0) R2_w=pkt(id=0,off=14,r=14,imm=0)
...
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200824222807.100200-1-yhs@fb.com
|
|
For the problem of increasing fragmentation of the bpf loader programs,
instead of using bpf_loader.o, which is used in samples/bpf, this
commit refactors the existing tracepoint tracing programs with libbbpf
bpf loader.
- Adding a tracepoint event and attaching a bpf program to it was done
through bpf_program_attach().
- Instead of using the existing BPF MAP definition, MAP definition
has been refactored with the new BTF-defined MAP format.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200823085334.9413-4-danieltimlee@gmail.com
|
|
For the problem of increasing fragmentation of the bpf loader programs,
instead of using bpf_loader.o, which is used in samples/bpf, this
commit refactors the existing kprobe tracing programs with libbbpf
bpf loader.
- For kprobe events pointing to system calls, the SYSCALL() macro in
trace_common.h was used.
- Adding a kprobe event and attaching a bpf program to it was done
through bpf_program_attach().
- Instead of using the existing BPF MAP definition, MAP definition
has been refactored with the new BTF-defined MAP format.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200823085334.9413-3-danieltimlee@gmail.com
|
|
Since commit cc7f641d637b ("samples: bpf: Refactor BPF map performance
test with libbpf") has ommited the removal of bpf_load.o from Makefile,
this commit removes the bpf_load.o rule for targets where bpf_load.o is
not used.
Fixes: cc7f641d637b ("samples: bpf: Refactor BPF map performance test with libbpf")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200823085334.9413-2-danieltimlee@gmail.com
|
|
Address review by Yonghong, to bring the new tests in line with the
usual code style.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200824084523.13104-1-lmb@cloudflare.com
|
|
Fix copy-paste error in types compatibility check. Local type is accidentally
used instead of target type for the very first type check strictness check.
This can result in potentially less strict candidate comparison. Fix the
error.
Fixes: 3fc32f40c402 ("libbpf: Implement type-based CO-RE relocations support")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200821225653.2180782-1-andriin@fb.com
|
|
Some versions of GCC report uninitialized targ_spec usage. GCC is wrong, but
let's avoid unnecessary warnings.
Fixes: ddc7c3042614 ("libbpf: implement BPF CO-RE offset relocation algorithm")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200821225556.2178419-1-andriin@fb.com
|
|
Describe the purpose of BPF sk_lookup program, how it can be attached, when
it gets invoked, and what information gets passed to it. Point the reader
to examples and further documentation.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200821100226.403844-1-jakub@cloudflare.com
|
|
bpf_devel_QA.rst:152 The subject prefix information is not accurate, it
should be 'PATCH bpf-next v2'
Also update LLVM version info and add information about
‘-DLLVM_TARGETS_TO_BUILD’ to prompt the developer to build the desired
target.
Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200821052817.46887-1-Jianlin.Lv@arm.com
|
|
Martin KaFai Lau says:
====================
The earlier effort in BPF-TCP-CC allows the TCP Congestion Control
algorithm to be written in BPF. It opens up opportunities to allow
a faster turnaround time in testing/releasing new congestion control
ideas to production environment.
The same flexibility can be extended to writing TCP header option.
It is not uncommon that people want to test new TCP header option
to improve the TCP performance. Another use case is for data-center
that has a more controlled environment and has more flexibility in
putting header options for internal traffic only.
This patch set introduces the necessary BPF logic and API to
allow bpf program to write and parse header options.
There are also some changes to TCP and they are mostly to provide
the needed sk and skb info to the bpf program to make decision.
Patch 9 is the main patch and has more details on the API and design.
The set includes an example which sends the max delay ack in
the BPF TCP header option and the receiving side can
then adjust its RTO accordingly.
v5:
- Move some of the comments from git commit message to the UAPI bpf.h
in patch 9
- Some variable clean up in the tests (patch 11).
v4:
- Since bpf-next is currently closed, tag the set with RFC to keep the
review cadence
- Separate tcp changes in its own patches (5, 6, 7). It is a bit
tricky since most of the tcp changes is to call out the bpf prog to
write and parse the header. The write and parse callout has been
modularized into a few bpf_skops_* function in v3.
This revision (v4) tries to move those bpf_skops_* functions into separate
TCP patches. However, they will be half implemented to highlight
the changes to the TCP stack, mainly:
- when the bpf prog will be called in the TCP stack and
- what information needs to pump through the TCP stack to the actual bpf
prog callsite.
The bpf_skops_* functions will be fully implemented in patch 9 together
with other bpf pieces.
- Use struct_size() in patch 1 (Eric)
- Add saw_unknown to struct tcp_options_received in patch 4 (Eric)
v3:
- Add kdoc for tcp_make_synack (Jakub Kicinski)
- Add BPF_WRITE_HDR_TCP_CURRENT_MSS and BPF_WRITE_HDR_TCP_SYNACK_COOKIE
in bpf.h to give a clearer meaning to sock_ops->args[0] when
writing header option.
- Rename BPF_SOCK_OPS_PARSE_UNKWN_HDR_OPT_CB_FLAG
to BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG
v2:
- Instead of limiting the bpf prog to write experimental
option (kind:254, magic:0xeB9F), this revision allows the bpf prog to
write any TCP header option through the bpf_store_hdr_opt() helper.
That will allow different bpf-progs to write its own
option and the helper will guarantee there is no duplication.
- Add bpf_load_hdr_opt() helper to search a particular option by kind.
Some of the get_syn logic is refactored to bpf_sock_ops_get_syn().
- Since bpf prog is no longer limited to option (254, 0xeB9F),
the TCP_SKB_CB(skb)->bpf_hdr_opt_off is no longer needed.
Instead, when there is any option kernel cannot recognize,
the bpf prog will be called if the
BPF_SOCK_OPS_PARSE_UNKWN_HDR_OPT_CB_FLAG is set.
[ The "unknown_opt" is learned in tcp_parse_options() in patch 4. ]
- Add BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG.
If this flag is set, the bpf-prog will be called
on all tcp packet received at an established sk.
It will be useful to ensure a previously written header option is
received by the peer.
e.g. The latter test is using this on the active-side during syncookie.
- The test_tcp_hdr_options.c is adjusted accordingly
to test writing both experimental and regular TCP header option.
- The test_misc_tcp_hdr_options.c is added to mainly
test different cases on the new helpers.
- Break up the TCP_BPF_RTO_MIN and TCP_BPF_DELACK_MAX into
two patches.
- Directly store the tcp_hdrlen in "struct saved_syn" instead of
going back to the tcp header to obtain it by "th->doff * 4"
- Add a new optval(==2) for setsockopt(TCP_SAVE_SYN) such
that it will also store the mac header (patch 9).
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch is adapted from Eric's patch in an earlier discussion [1].
The TCP_SAVE_SYN currently only stores the network header and
tcp header. This patch allows it to optionally store
the mac header also if the setsockopt's optval is 2.
It requires one more bit for the "save_syn" bit field in tcp_sock.
This patch achieves this by moving the syn_smc bit next to the is_mptcp.
The syn_smc is currently used with the TCP experimental option. Since
syn_smc is only used when CONFIG_SMC is enabled, this patch also puts
the "IS_ENABLED(CONFIG_SMC)" around it like the is_mptcp did
with "IS_ENABLED(CONFIG_MPTCP)".
The mac_hdrlen is also stored in the "struct saved_syn"
to allow a quick offset from the bpf prog if it chooses to start
getting from the network header or the tcp header.
[1]: https://lore.kernel.org/netdev/CANn89iLJNWh6bkH7DNhy_kmcAexuUCccqERqe7z2QsvPhGrYPQ@mail.gmail.com/
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20200820190123.2886935-1-kafai@fb.com
|
|
This patch adds tests for the new bpf tcp header option feature.
test_tcp_hdr_options.c:
- It tests header option writing and parsing in 3WHS: regular
connection establishment, fastopen, and syncookie.
- In syncookie, the passive side's bpf prog is asking the active side
to resend its bpf header option by specifying a RESEND bit in the
outgoing SYNACK. handle_active_estab() and write_nodata_opt() has
some details.
- handle_passive_estab() has comments on fastopen.
- It also has test for header writing and parsing in FIN packet.
- Most of the tests is writing an experimental option 254 with magic 0xeB9F.
- The no_exprm_estab() also tests writing a regular TCP option
without any magic.
test_misc_tcp_options.c:
- It is an one directional test. Active side writes option and
passive side parses option. The focus is to exercise
the new helpers and API.
- Testing the new helper: bpf_load_hdr_opt() and bpf_store_hdr_opt().
- Testing the bpf_getsockopt(TCP_BPF_SYN).
- Negative tests for the above helpers.
- Testing the sock_ops->skb_data.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820190117.2886749-1-kafai@fb.com
|
|
This patch adds a fastopen_connect() helper which will
be used in a later test.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820190111.2886196-1-kafai@fb.com
|
|
[ Note: The TCP changes here is mainly to implement the bpf
pieces into the bpf_skops_*() functions introduced
in the earlier patches. ]
The earlier effort in BPF-TCP-CC allows the TCP Congestion Control
algorithm to be written in BPF. It opens up opportunities to allow
a faster turnaround time in testing/releasing new congestion control
ideas to production environment.
The same flexibility can be extended to writing TCP header option.
It is not uncommon that people want to test new TCP header option
to improve the TCP performance. Another use case is for data-center
that has a more controlled environment and has more flexibility in
putting header options for internal only use.
For example, we want to test the idea in putting maximum delay
ACK in TCP header option which is similar to a draft RFC proposal [1].
This patch introduces the necessary BPF API and use them in the
TCP stack to allow BPF_PROG_TYPE_SOCK_OPS program to parse
and write TCP header options. It currently supports most of
the TCP packet except RST.
Supported TCP header option:
───────────────────────────
This patch allows the bpf-prog to write any option kind.
Different bpf-progs can write its own option by calling the new helper
bpf_store_hdr_opt(). The helper will ensure there is no duplicated
option in the header.
By allowing bpf-prog to write any option kind, this gives a lot of
flexibility to the bpf-prog. Different bpf-prog can write its
own option kind. It could also allow the bpf-prog to support a
recently standardized option on an older kernel.
Sockops Callback Flags:
──────────────────────
The bpf program will only be called to parse/write tcp header option
if the following newly added callback flags are enabled
in tp->bpf_sock_ops_cb_flags:
BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG
BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG
BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG
A few words on the PARSE CB flags. When the above PARSE CB flags are
turned on, the bpf-prog will be called on packets received
at a sk that has at least reached the ESTABLISHED state.
The parsing of the SYN-SYNACK-ACK will be discussed in the
"3 Way HandShake" section.
The default is off for all of the above new CB flags, i.e. the bpf prog
will not be called to parse or write bpf hdr option. There are
details comment on these new cb flags in the UAPI bpf.h.
sock_ops->skb_data and bpf_load_hdr_opt()
─────────────────────────────────────────
sock_ops->skb_data and sock_ops->skb_data_end covers the whole
TCP header and its options. They are read only.
The new bpf_load_hdr_opt() helps to read a particular option "kind"
from the skb_data.
Please refer to the comment in UAPI bpf.h. It has details
on what skb_data contains under different sock_ops->op.
3 Way HandShake
───────────────
The bpf-prog can learn if it is sending SYN or SYNACK by reading the
sock_ops->skb_tcp_flags.
* Passive side
When writing SYNACK (i.e. sock_ops->op == BPF_SOCK_OPS_WRITE_HDR_OPT_CB),
the received SYN skb will be available to the bpf prog. The bpf prog can
use the SYN skb (which may carry the header option sent from the remote bpf
prog) to decide what bpf header option should be written to the outgoing
SYNACK skb. The SYN packet can be obtained by getsockopt(TCP_BPF_SYN*).
More on this later. Also, the bpf prog can learn if it is in syncookie
mode (by checking sock_ops->args[0] == BPF_WRITE_HDR_TCP_SYNACK_COOKIE).
The bpf prog can store the received SYN pkt by using the existing
bpf_setsockopt(TCP_SAVE_SYN). The example in a later patch does it.
[ Note that the fullsock here is a listen sk, bpf_sk_storage
is not very useful here since the listen sk will be shared
by many concurrent connection requests.
Extending bpf_sk_storage support to request_sock will add weight
to the minisock and it is not necessary better than storing the
whole ~100 bytes SYN pkt. ]
When the connection is established, the bpf prog will be called
in the existing PASSIVE_ESTABLISHED_CB callback. At that time,
the bpf prog can get the header option from the saved syn and
then apply the needed operation to the newly established socket.
The later patch will use the max delay ack specified in the SYN
header and set the RTO of this newly established connection
as an example.
The received ACK (that concludes the 3WHS) will also be available to
the bpf prog during PASSIVE_ESTABLISHED_CB through the sock_ops->skb_data.
It could be useful in syncookie scenario. More on this later.
There is an existing getsockopt "TCP_SAVED_SYN" to return the whole
saved syn pkt which includes the IP[46] header and the TCP header.
A few "TCP_BPF_SYN*" getsockopt has been added to allow specifying where to
start getting from, e.g. starting from TCP header, or from IP[46] header.
The new getsockopt(TCP_BPF_SYN*) will also know where it can get
the SYN's packet from:
- (a) the just received syn (available when the bpf prog is writing SYNACK)
and it is the only way to get SYN during syncookie mode.
or
- (b) the saved syn (available in PASSIVE_ESTABLISHED_CB and also other
existing CB).
The bpf prog does not need to know where the SYN pkt is coming from.
The getsockopt(TCP_BPF_SYN*) will hide this details.
Similarly, a flags "BPF_LOAD_HDR_OPT_TCP_SYN" is also added to
bpf_load_hdr_opt() to read a particular header option from the SYN packet.
* Fastopen
Fastopen should work the same as the regular non fastopen case.
This is a test in a later patch.
* Syncookie
For syncookie, the later example patch asks the active
side's bpf prog to resend the header options in ACK. The server
can use bpf_load_hdr_opt() to look at the options in this
received ACK during PASSIVE_ESTABLISHED_CB.
* Active side
The bpf prog will get a chance to write the bpf header option
in the SYN packet during WRITE_HDR_OPT_CB. The received SYNACK
pkt will also be available to the bpf prog during the existing
ACTIVE_ESTABLISHED_CB callback through the sock_ops->skb_data
and bpf_load_hdr_opt().
* Turn off header CB flags after 3WHS
If the bpf prog does not need to write/parse header options
beyond the 3WHS, the bpf prog can clear the bpf_sock_ops_cb_flags
to avoid being called for header options.
Or the bpf-prog can select to leave the UNKNOWN_HDR_OPT_CB_FLAG on
so that the kernel will only call it when there is option that
the kernel cannot handle.
[1]: draft-wang-tcpm-low-latency-opt-00
https://tools.ietf.org/html/draft-wang-tcpm-low-latency-opt-00
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820190104.2885895-1-kafai@fb.com
|
|
A later patch needs to add a few pointers and a few u8 to
sock_ops_kern. Hence, this patch saves some spaces by moving
some of the existing members from u32 to u8 so that the later
patch can still fit everything in a cacheline.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820190058.2885640-1-kafai@fb.com
|
|
The bpf prog needs to parse the SYN header to learn what options have
been sent by the peer's bpf-prog before writing its options into SYNACK.
This patch adds a "syn_skb" arg to tcp_make_synack() and send_synack().
This syn_skb will eventually be made available (as read-only) to the
bpf prog. This will be the only SYN packet available to the bpf
prog during syncookie. For other regular cases, the bpf prog can
also use the saved_syn.
When writing options, the bpf prog will first be called to tell the
kernel its required number of bytes. It is done by the new
bpf_skops_hdr_opt_len(). The bpf prog will only be called when the new
BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG is set in tp->bpf_sock_ops_cb_flags.
When the bpf prog returns, the kernel will know how many bytes are needed
and then update the "*remaining" arg accordingly. 4 byte alignment will
be included in the "*remaining" before this function returns. The 4 byte
aligned number of bytes will also be stored into the opts->bpf_opt_len.
"bpf_opt_len" is a newly added member to the struct tcp_out_options.
Then the new bpf_skops_write_hdr_opt() will call the bpf prog to write the
header options. The bpf prog is only called if it has reserved spaces
before (opts->bpf_opt_len > 0).
The bpf prog is the last one getting a chance to reserve header space
and writing the header option.
These two functions are half implemented to highlight the changes in
TCP stack. The actual codes preparing the bpf running context and
invoking the bpf prog will be added in the later patch with other
necessary bpf pieces.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20200820190052.2885316-1-kafai@fb.com
|
|
The patch adds a function bpf_skops_parse_hdr().
It will call the bpf prog to parse the TCP header received at
a tcp_sock that has at least reached the ESTABLISHED state.
For the packets received during the 3WHS (SYN, SYNACK and ACK),
the received skb will be available to the bpf prog during the callback
in bpf_skops_established() introduced in the previous patch and
in the bpf_skops_write_hdr_opt() that will be added in the
next patch.
Calling bpf prog to parse header is controlled by two new flags in
tp->bpf_sock_ops_cb_flags:
BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG and
BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG.
When BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG is set,
the bpf prog will only be called when there is unknown
option in the TCP header.
When BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG is set,
the bpf prog will be called on all received TCP header.
This function is half implemented to highlight the changes in
TCP stack. The actual codes preparing the bpf running context and
invoking the bpf prog will be added in the later patch with other
necessary bpf pieces.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20200820190046.2885054-1-kafai@fb.com
|
|
In tcp_init_transfer(), it currently calls the bpf prog to give it a
chance to handle the just "ESTABLISHED" event (e.g. do setsockopt
on the newly established sk). Right now, it is done by calling the
general purpose tcp_call_bpf().
In the later patch, it also needs to pass the just-received skb which
concludes the 3 way handshake. E.g. the SYNACK received at the active side.
The bpf prog can then learn some specific header options written by the
peer's bpf-prog and potentially do setsockopt on the newly established sk.
Thus, instead of reusing the general purpose tcp_call_bpf(), a new function
bpf_skops_established() is added to allow passing the "skb" to the bpf
prog. The actual skb passing from bpf_skops_established() to the bpf prog
will happen together in a later patch which has the necessary bpf pieces.
A "skb" arg is also added to tcp_init_transfer() such that
it can then be passed to bpf_skops_established().
Calling the new bpf_skops_established() instead of tcp_call_bpf()
should be a noop in this patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200820190039.2884750-1-kafai@fb.com
|
|
In a later patch, the bpf prog only wants to be called to handle
a header option if that particular header option cannot be handled by
the kernel. This unknown option could be written by the peer's bpf-prog.
It could also be a new standard option that the running kernel does not
support it while a bpf-prog can handle it.
This patch adds a "saw_unknown" bit to "struct tcp_options_received"
and it uses an existing one byte hole to do that. "saw_unknown" will
be set in tcp_parse_options() if it sees an option that the kernel
cannot handle.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200820190033.2884430-1-kafai@fb.com
|
