| Age | Commit message (Collapse) | Author |
|---|
|
It would be useful to have a cheat-sheet for everything under
tracing/events/ alongside the existing text describing the other files
in the tracing/ dir.
Add short descriptions of the directories and files under events/
along with examples, similar to the existing text for the other files
in tracing/.
Also clean up a few minor alignment problems noticed when adding the
new text.
Link: http://lkml.kernel.org/r/1389993104.3040.445.camel@empanada
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
In kernel/trace/trace.c we have this:
static void tracing_pipe_buf_release(struct pipe_inode_info *pipe,
struct pipe_buffer *buf)
{
__free_page(buf->page);
}
static const struct pipe_buf_operations tracing_pipe_buf_ops = {
.can_merge = 0,
.map = generic_pipe_buf_map,
.unmap = generic_pipe_buf_unmap,
.confirm = generic_pipe_buf_confirm,
.release = tracing_pipe_buf_release,
.steal = generic_pipe_buf_steal,
.get = generic_pipe_buf_get,
};
with
void generic_pipe_buf_get(struct pipe_inode_info *pipe, struct pipe_buffer *buf)
{
page_cache_get(buf->page);
}
and I don't see anything that would've prevented tee(2) called on the pipe
that got stuff spliced into it from that sucker. ->ops->get() will be
called, then buf gets copied into target pipe's ->bufs[] and eventually
readers get to both copies of the buffer. With
get_page(page)
look at that page
__free_page(page)
look at that page
__free_page(page)
which is not a good thing, to put it mildly. AFAICS, that ought to use
the normal generic_pipe_buf_release() (aka page_cache_release(buf->page)),
shouldn't it?
[
SDR - As trace_pipe just allocates the page with alloc_page(GFP_KERNEL),
and doesn't do anything special with it (no LRU logic). The __free_page()
should be fine, as it wont actually free a page with reference count.
Maybe there's a chance to leak memory? Anyway, This change is at a minimum
good for being symmetric with generic_pipe_buf_get, it is fine to add.
]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[ SDR - Removed no longer used tracing_pipe_buf_release ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The trace buffer has a descriptor pointer that goes back to the trace
array. But it was never assigned. Luckily, nothing uses it (yet), but
it will in the future.
Although nothing currently uses this, if any of the new features get
backported to older kernels, and because this is such a simple change,
I'm marking it for stable too.
Cc: stable@vger.kernel.org # v3.10+
Fixes: 12883efb670c "tracing: Consolidate max_tr into main trace_array structure"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The synchronization needed after ftrace_ops are unregistered must happen
after the callback is disabled from becing called by functions.
The current location happens after the function is being removed from the
internal lists, but not after the function callbacks were disabled, leaving
the functions susceptible of being called after their callbacks are freed.
This affects perf and any externel users of function tracing (LTTng and
SystemTap).
Cc: stable@vger.kernel.org # 3.0+
Fixes: cdbe61bfe704 "ftrace: Allow dynamically allocated function tracers"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Doing some different tests, I discovered that function graph tracing, when
filtered via the set_ftrace_filter and set_ftrace_notrace files, does
not always keep with them if another function ftrace_ops is registered
to trace functions.
The reason is that function graph just happens to trace all functions
that the function tracer enables. When there was only one user of
function tracing, the function graph tracer did not need to worry about
being called by functions that it did not want to trace. But now that there
are other users, this becomes a problem.
For example, one just needs to do the following:
# cd /sys/kernel/debug/tracing
# echo schedule > set_ftrace_filter
# echo function_graph > current_tracer
# cat trace
[..]
0) | schedule() {
------------------------------------------
0) <idle>-0 => rcu_pre-7
------------------------------------------
0) ! 2980.314 us | }
0) | schedule() {
------------------------------------------
0) rcu_pre-7 => <idle>-0
------------------------------------------
0) + 20.701 us | }
# echo 1 > /proc/sys/kernel/stack_tracer_enabled
# cat trace
[..]
1) + 20.825 us | }
1) + 21.651 us | }
1) + 30.924 us | } /* SyS_ioctl */
1) | do_page_fault() {
1) | __do_page_fault() {
1) 0.274 us | down_read_trylock();
1) 0.098 us | find_vma();
1) | handle_mm_fault() {
1) | _raw_spin_lock() {
1) 0.102 us | preempt_count_add();
1) 0.097 us | do_raw_spin_lock();
1) 2.173 us | }
1) | do_wp_page() {
1) 0.079 us | vm_normal_page();
1) 0.086 us | reuse_swap_page();
1) 0.076 us | page_move_anon_rmap();
1) | unlock_page() {
1) 0.082 us | page_waitqueue();
1) 0.086 us | __wake_up_bit();
1) 1.801 us | }
1) 0.075 us | ptep_set_access_flags();
1) | _raw_spin_unlock() {
1) 0.098 us | do_raw_spin_unlock();
1) 0.105 us | preempt_count_sub();
1) 1.884 us | }
1) 9.149 us | }
1) + 13.083 us | }
1) 0.146 us | up_read();
When the stack tracer was enabled, it enabled all functions to be traced, which
now the function graph tracer also traces. This is a side effect that should
not occur.
To fix this a test is added when the function tracing is changed, as well as when
the graph tracer is enabled, to see if anything other than the ftrace global_ops
function tracer is enabled. If so, then the graph tracer calls a test trampoline
that will look at the function that is being traced and compare it with the
filters defined by the global_ops.
As an optimization, if there's no other function tracers registered, or if
the only registered function tracers also use the global ops, the function
graph infrastructure will call the registered function graph callback directly
and not go through the test trampoline.
Cc: stable@vger.kernel.org # 3.3+
Fixes: d2d45c7a03a2 "tracing: Have stack_tracer use a separate list of functions"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
ftrace_trace_function is a variable that holds what function will be called
directly by the assembly code (mcount). If just a single function is
registered and it handles recursion itself, then the assembly will call that
function directly without any helper function. It also passes in the
ftrace_op that was registered with the callback. The ftrace_op to send is
stored in the function_trace_op variable.
The ftrace_trace_function and function_trace_op needs to be coordinated such
that the called callback wont be called with the wrong ftrace_op, otherwise
bad things can happen if it expected a different op. Luckily, there's no
callback that doesn't use the helper functions that requires this. But
there soon will be and this needs to be fixed.
Use a set_function_trace_op to store the ftrace_op to set the
function_trace_op to when it is safe to do so (during the update function
within the breakpoint or stop machine calls). Or if dynamic ftrace is not
being used (static tracing) then we have to do a bit more synchronization
when the ftrace_trace_function is set as that takes affect immediately
(as oppose to dynamic ftrace doing it with the modification of the trampoline).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Currently there's no way to know what triggers exist on a kernel without
looking at the source of the kernel or randomly trying out triggers.
Instead of creating another file in the debugfs system, simply show
what available triggers are there when cat'ing the trigger file when
it has no events:
[root /sys/kernel/debug/tracing]# cat events/sched/sched_switch/trigger
# Available triggers:
# traceon traceoff snapshot stacktrace enable_event disable_event
This stays consistent with other debugfs files where meta data like
this is always proceeded with a '#' at the start of the line so that
tools can strip these out.
Link: http://lkml.kernel.org/r/20140107103548.0a84536d@gandalf.local.home
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The event trigger code that checks for callback triggers before and
after recording of an event has lots of flags checks. This code is
duplicated throughout the ftrace events, kprobes and system calls.
They all do the exact same checks against the event flags.
Added helper functions ftrace_trigger_soft_disabled(),
event_trigger_unlock_commit() and event_trigger_unlock_commit_regs()
that consolidated the code and these are used instead.
Link: http://lkml.kernel.org/r/20140106222703.5e7dbba2@gandalf.local.home
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The counters for the traceon and traceoff are only suppose to decrement
when the trigger enables or disables tracing. It is not suppose to decrement
every time the event is hit.
Only decrement the counter if the trigger actually did something.
Link: http://lkml.kernel.org/r/20140106223124.0e5fd0b4@gandalf.local.home
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
There's no reason to use double-underscores for any variable name in
ftrace_syscall_enter()/exit(), since those functions aren't generated
and there's no need to avoid namespace collisions as with the event
macros, which is where the original invocation code came from.
Link: http://lkml.kernel.org/r/0b489c9d1f7ee315cff60fa0e4c2b433ade8ae0d.1389036657.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add code to the kprobe/kretprobe event functions that will invoke any
event triggers associated with a probe's ftrace_event_file.
The code to do this is very similar to the invocation code already
used to invoke the triggers associated with static events and
essentially replaces the existing soft-disable checks with a superset
that preserves the original behavior but adds the bits needed to
support event triggers.
Link: http://lkml.kernel.org/r/f2d49f157b608070045fdb26c9564d5a05a5a7d0.1389036657.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When kprobe-based dynamic event tracer is not enabled, it caused
following build error:
kernel/built-in.o: In function `traceprobe_update_arg':
(.text+0x10c8dd): undefined reference to `fetch_symbol_u8'
kernel/built-in.o: In function `traceprobe_update_arg':
(.text+0x10c8e9): undefined reference to `fetch_symbol_u16'
kernel/built-in.o: In function `traceprobe_update_arg':
(.text+0x10c8f5): undefined reference to `fetch_symbol_u32'
kernel/built-in.o: In function `traceprobe_update_arg':
(.text+0x10c901): undefined reference to `fetch_symbol_u64'
kernel/built-in.o: In function `traceprobe_update_arg':
(.text+0x10c909): undefined reference to `fetch_symbol_string'
kernel/built-in.o: In function `traceprobe_update_arg':
(.text+0x10c913): undefined reference to `fetch_symbol_string_size'
...
It was due to the fetch methods are referred from CHECK_FETCH_FUNCS
macro and since it was only defined in trace_kprobe.c. Move NULL
definition of such fetch functions to the header file.
Note, it also requires CONFIG_BRANCH_PROFILING enabled to trigger
this failure as well. This is because the "fetch_symbol_*" variables
are referenced in a "else if" statement that will only call
update_symbol_cache(), which is a static inline stub function
when CONFIG_KPROBE_EVENT is not enabled. gcc is smart enough
to optimize this "else if" out and that also removes the code that
references the undefined variables.
But when BRANCH_PROFILING is enabled, it fools gcc into keeping
the if statement around and thus references the undefined symbols
and fails to build.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Enable to fetch data from a file offset. Currently it only supports
fetching from same binary uprobe set. It'll translate the file offset
to a proper virtual address in the process.
The syntax is "@+OFFSET" as it does similar to normal memory fetching
(@ADDR) which does no address translation.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
uprobe_trace_print() and uprobe_perf_print() need to pass the additional
info to call_fetch() methods, currently there is no simple way to do this.
current->utask looks like a natural place to hold this info, but we need
to allocate it before handler_chain().
This is a bit unfortunate, perhaps we will find a better solution later,
but this is simple and should work right now.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Enable to fetch other types of argument for the uprobes. IOW, we can
access stack, memory, deref, bitfield and retval from uprobes now.
The format for the argument types are same as kprobes (but @SYMBOL
type is not supported for uprobes), i.e:
@ADDR : Fetch memory at ADDR
$stackN : Fetch Nth entry of stack (N >= 0)
$stack : Fetch stack address
$retval : Fetch return value
+|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address
Note that the retval only can be used with uretprobes.
Original-patch-by: Hyeoncheol Lee <cheol.lee@lge.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Hyeoncheol Lee <cheol.lee@lge.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Fetching from user space should be done in a non-atomic context. So
use a per-cpu buffer and copy its content to the ring buffer
atomically. Note that we can migrate during accessing user memory
thus use a per-cpu mutex to protect concurrent accesses.
This is needed since we'll be able to fetch args from an user memory
which can be swapped out. Before that uprobes could fetch args from
registers only which saved in a kernel space.
While at it, use __get_data_size() and store_trace_args() to reduce
code duplication. And add struct uprobe_cpu_buffer and its helpers as
suggested by Oleg.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Currently uprobes don't pass is_return to the argument parser so that
it cannot make use of "$retval" fetch method since it only works for
return probes.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Use separate method to fetch from memory. Move existing functions to
trace_kprobe.c and make them static. Also add new memory fetch
implementation for uprobes.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The deref fetch methods access a memory region but it assumes that
it's a kernel memory since uprobes does not support them.
Add ->fetch and ->fetch_size member in order to provide a proper
access methods for supporting uprobes.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Hyeoncheol Lee <cheol.lee@lge.com>
[namhyung@kernel.org: Split original patch into pieces as requested]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Move existing functions to trace_kprobe.c and add NULL entries to the
uprobes fetch type table. I don't make them static since some generic
routines like update/free_XXX_fetch_param() require pointers to the
functions.
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Use separate method to fetch from stack. Move existing functions to
trace_kprobe.c and make them static. Also add new stack fetch
implementation for uprobes.
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Use separate fetch_type_table for kprobes and uprobes. It currently
shares all fetch methods but some of them will be implemented
differently later.
This is not to break build if [ku]probes is configured alone (like
!CONFIG_KPROBE_EVENT and CONFIG_UPROBE_EVENT). So I added '__weak'
to the table declaration so that it can be safely omitted when it
configured out.
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Move fetch function helper macros/functions to the header file and
make them external. This is preparation of supporting uprobe fetch
table in next patch.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The set_print_fmt() functions are implemented almost same for
[ku]probes. Move it to a common place and get rid of the duplication.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The __get_data_size() and store_trace_args() will be used by uprobes
too. Move them to a common location.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Convert struct trace_uprobe to make use of the common trace_probe
structure.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
There are functions that can be shared to both of kprobes and uprobes.
Separate common data structure to struct trace_probe and use it from
the shared functions.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The print format of s32 type was "ld" and it's casted to "long". So
it turned out to print 4294967295 for "-1" on 64-bit systems. Not
sure whether it worked well on 32-bit systems.
Anyway, it doesn't need to have cast argument at all since it already
casted using type pointer - just get rid of it. Thanks to Oleg for
pointing that out.
And print 0x prefix for unsigned type as it shows hex numbers.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The uprobe syntax requires an offset after a file path not a symbol.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The filter field of the event_trigger_data structure is protected under
RCU sched locks. It was not annotated as such, and after doing so,
sparse pointed out several locations that required fix ups.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Trace event triggers added a lseek that uses the ftrace_filter_lseek()
function. Unfortunately, when function tracing is not configured in
that function is not defined and the kernel fails to build.
This is the second time that function was added to a file ops and
it broke the build due to requiring special config dependencies.
Make a generic tracing_lseek() that all the tracing utilities may
use.
Also, modify the old ftrace_filter_lseek() to return 0 instead of
1 on WRONLY. Not sure why it was a 1 as that does not make sense.
This also changes the old tracing_seek() to modify the file pos
pointer on WRONLY as well.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Provide a basic overview of trace event triggers and document the
available trigger commands, along with a few simple examples.
Link: http://lkml.kernel.org/r/2595dd9196d7b553049611f2a3f849ca75d650a2.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add a generic event_command.set_trigger_filter() op implementation and
have the current set of trigger commands use it - this essentially
gives them all support for filters.
Syntactically, filters are supported by adding 'if <filter>' just
after the command, in which case only events matching the filter will
invoke the trigger. For example, to add a filter to an
enable/disable_event command:
echo 'enable_event:system:event if common_pid == 999' > \
.../othersys/otherevent/trigger
The above command will only enable the system:event event if the
common_pid field in the othersys:otherevent event is 999.
As another example, to add a filter to a stacktrace command:
echo 'stacktrace if common_pid == 999' > \
.../somesys/someevent/trigger
The above command will only trigger a stacktrace if the common_pid
field in the event is 999.
The filter syntax is the same as that described in the 'Event
filtering' section of Documentation/trace/events.txt.
Because triggers can now use filters, the trigger-invoking logic needs
to be moved in those cases - e.g. for ftrace_raw_event_calls, if a
trigger has a filter associated with it, the trigger invocation now
needs to happen after the { assign; } part of the call, in order for
the trigger condition to be tested.
There's still a SOFT_DISABLED-only check at the top of e.g. the
ftrace_raw_events function, so when an event is soft disabled but not
because of the presence of a trigger, the original SOFT_DISABLED
behavior remains unchanged.
There's also a bit of trickiness in that some triggers need to avoid
being invoked while an event is currently in the process of being
logged, since the trigger may itself log data into the trace buffer.
Thus we make sure the current event is committed before invoking those
triggers. To do that, we split the trigger invocation in two - the
first part (event_triggers_call()) checks the filter using the current
trace record; if a command has the post_trigger flag set, it sets a
bit for itself in the return value, otherwise it directly invoks the
trigger. Once all commands have been either invoked or set their
return flag, event_triggers_call() returns. The current record is
then either committed or discarded; if any commands have deferred
their triggers, those commands are finally invoked following the close
of the current event by event_triggers_post_call().
To simplify the above and make it more efficient, the TRIGGER_COND bit
is introduced, which is set only if a soft-disabled trigger needs to
use the log record for filter testing or needs to wait until the
current log record is closed.
The syscall event invocation code is also changed in analogous ways.
Because event triggers need to be able to create and free filters,
this also adds a couple external wrappers for the existing
create_filter and free_filter functions, which are too generic to be
made extern functions themselves.
Link: http://lkml.kernel.org/r/7164930759d8719ef460357f143d995406e4eead.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Now that event triggers use ftrace_event_file(), it needs to be outside
the #ifdef CONFIG_DYNAMIC_FTRACE, as it can now be used when that is
not defined.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add 'enable_event' and 'disable_event' event_command commands.
enable_event and disable_event event triggers are added by the user
via these commands in a similar way and using practically the same
syntax as the analagous 'enable_event' and 'disable_event' ftrace
function commands, but instead of writing to the set_ftrace_filter
file, the enable_event and disable_event triggers are written to the
per-event 'trigger' files:
echo 'enable_event:system:event' > .../othersys/otherevent/trigger
echo 'disable_event:system:event' > .../othersys/otherevent/trigger
The above commands will enable or disable the 'system:event' trace
events whenever the othersys:otherevent events are hit.
This also adds a 'count' version that limits the number of times the
command will be invoked:
echo 'enable_event:system:event:N' > .../othersys/otherevent/trigger
echo 'disable_event:system:event:N' > .../othersys/otherevent/trigger
Where N is the number of times the command will be invoked.
The above commands will will enable or disable the 'system:event'
trace events whenever the othersys:otherevent events are hit, but only
N times.
This also makes the find_event_file() helper function extern, since
it's useful to use from other places, such as the event triggers code,
so make it accessible.
Link: http://lkml.kernel.org/r/f825f3048c3f6b026ee37ae5825f9fc373451828.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add 'stacktrace' event_command. stacktrace event triggers are added
by the user via this command in a similar way and using practically
the same syntax as the analogous 'stacktrace' ftrace function command,
but instead of writing to the set_ftrace_filter file, the stacktrace
event trigger is written to the per-event 'trigger' files:
echo 'stacktrace' > .../tracing/events/somesys/someevent/trigger
The above command will turn on stacktraces for someevent i.e. whenever
someevent is hit, a stacktrace will be logged.
This also adds a 'count' version that limits the number of times the
command will be invoked:
echo 'stacktrace:N' > .../tracing/events/somesys/someevent/trigger
Where N is the number of times the command will be invoked.
The above command will log N stacktraces for someevent i.e. whenever
someevent is hit N times, a stacktrace will be logged.
Link: http://lkml.kernel.org/r/0c30c008a0828c660aa0e1bbd3255cf179ed5c30.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add 'snapshot' event_command. snapshot event triggers are added by
the user via this command in a similar way and using practically the
same syntax as the analogous 'snapshot' ftrace function command, but
instead of writing to the set_ftrace_filter file, the snapshot event
trigger is written to the per-event 'trigger' files:
echo 'snapshot' > .../somesys/someevent/trigger
The above command will turn on snapshots for someevent i.e. whenever
someevent is hit, a snapshot will be done.
This also adds a 'count' version that limits the number of times the
command will be invoked:
echo 'snapshot:N' > .../somesys/someevent/trigger
Where N is the number of times the command will be invoked.
The above command will snapshot N times for someevent i.e. whenever
someevent is hit N times, a snapshot will be done.
Also adds a new tracing_alloc_snapshot() function - the existing
tracing_snapshot_alloc() function is a special version of
tracing_snapshot() that also does the snapshot allocation - the
snapshot triggers would like to be able to do just the allocation but
not take a snapshot; the existing tracing_snapshot_alloc() in turn now
also calls tracing_alloc_snapshot() underneath to do that allocation.
Link: http://lkml.kernel.org/r/c9524dd07ce01f9dcbd59011290e0a8d5b47d7ad.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
[ fix up from kbuild test robot <fengguang.wu@intel.com report ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add 'traceon' and 'traceoff' event_command commands. traceon and
traceoff event triggers are added by the user via these commands in a
similar way and using practically the same syntax as the analagous
'traceon' and 'traceoff' ftrace function commands, but instead of
writing to the set_ftrace_filter file, the traceon and traceoff
triggers are written to the per-event 'trigger' files:
echo 'traceon' > .../tracing/events/somesys/someevent/trigger
echo 'traceoff' > .../tracing/events/somesys/someevent/trigger
The above command will turn tracing on or off whenever someevent is
hit.
This also adds a 'count' version that limits the number of times the
command will be invoked:
echo 'traceon:N' > .../tracing/events/somesys/someevent/trigger
echo 'traceoff:N' > .../tracing/events/somesys/someevent/trigger
Where N is the number of times the command will be invoked.
The above commands will will turn tracing on or off whenever someevent
is hit, but only N times.
Some common register/unregister_trigger() implementations of the
event_command reg()/unreg() callbacks are also provided, which add and
remove trigger instances to the per-event list of triggers, and
arm/disarm them as appropriate. event_trigger_callback() is a
general-purpose event_command func() implementation that orchestrates
command parsing and registration for most normal commands.
Most event commands will use these, but some will override and
possibly reuse them.
The event_trigger_init(), event_trigger_free(), and
event_trigger_print() functions are meant to be common implementations
of the event_trigger_ops init(), free(), and print() ops,
respectively.
Most trigger_ops implementations will use these, but some will
override and possibly reuse them.
Link: http://lkml.kernel.org/r/00a52816703b98d2072947478dd6e2d70cde5197.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add a 'trigger' file for each trace event, enabling 'trace event
triggers' to be set for trace events.
'trace event triggers' are patterned after the existing 'ftrace
function triggers' implementation except that triggers are written to
per-event 'trigger' files instead of to a single file such as the
'set_ftrace_filter' used for ftrace function triggers.
The implementation is meant to be entirely separate from ftrace
function triggers, in order to keep the respective implementations
relatively simple and to allow them to diverge.
The event trigger functionality is built on top of SOFT_DISABLE
functionality. It adds a TRIGGER_MODE bit to the ftrace_event_file
flags which is checked when any trace event fires. Triggers set for a
particular event need to be checked regardless of whether that event
is actually enabled or not - getting an event to fire even if it's not
enabled is what's already implemented by SOFT_DISABLE mode, so trigger
mode directly reuses that. Event trigger essentially inherit the soft
disable logic in __ftrace_event_enable_disable() while adding a bit of
logic and trigger reference counting via tm_ref on top of that in a
new trace_event_trigger_enable_disable() function. Because the base
__ftrace_event_enable_disable() code now needs to be invoked from
outside trace_events.c, a wrapper is also added for those usages.
The triggers for an event are actually invoked via a new function,
event_triggers_call(), and code is also added to invoke them for
ftrace_raw_event calls as well as syscall events.
The main part of the patch creates a new trace_events_trigger.c file
to contain the trace event triggers implementation.
The standard open, read, and release file operations are implemented
here.
The open() implementation sets up for the various open modes of the
'trigger' file. It creates and attaches the trigger iterator and sets
up the command parser. If opened for reading set up the trigger
seq_ops.
The read() implementation parses the event trigger written to the
'trigger' file, looks up the trigger command, and passes it along to
that event_command's func() implementation for command-specific
processing.
The release() implementation does whatever cleanup is needed to
release the 'trigger' file, like releasing the parser and trigger
iterator, etc.
A couple of functions for event command registration and
unregistration are added, along with a list to add them to and a mutex
to protect them, as well as an (initially empty) registration function
to add the set of commands that will be added by future commits, and
call to it from the trace event initialization code.
also added are a couple trigger-specific data structures needed for
these implementations such as a trigger iterator and a struct for
trigger-specific data.
A couple structs consisting mostly of function meant to be implemented
in command-specific ways, event_command and event_trigger_ops, are
used by the generic event trigger command implementations. They're
being put into trace.h alongside the other trace_event data structures
and functions, in the expectation that they'll be needed in several
trace_event-related files such as trace_events_trigger.c and
trace_events.c.
The event_command.func() function is meant to be called by the trigger
parsing code in order to add a trigger instance to the corresponding
event. It essentially coordinates adding a live trigger instance to
the event, and arming the triggering the event.
Every event_command func() implementation essentially does the
same thing for any command:
- choose ops - use the value of param to choose either a number or
count version of event_trigger_ops specific to the command
- do the register or unregister of those ops
- associate a filter, if specified, with the triggering event
The reg() and unreg() ops allow command-specific implementations for
event_trigger_op registration and unregistration, and the
get_trigger_ops() op allows command-specific event_trigger_ops
selection to be parameterized. When a trigger instance is added, the
reg() op essentially adds that trigger to the triggering event and
arms it, while unreg() does the opposite. The set_filter() function
is used to associate a filter with the trigger - if the command
doesn't specify a set_filter() implementation, the command will ignore
filters.
Each command has an associated trigger_type, which serves double duty,
both as a unique identifier for the command as well as a value that
can be used for setting a trigger mode bit during trigger invocation.
The signature of func() adds a pointer to the event_command struct,
used to invoke those functions, along with a command_data param that
can be passed to the reg/unreg functions. This allows func()
implementations to use command-specific blobs and supports code
re-use.
The event_trigger_ops.func() command corrsponds to the trigger 'probe'
function that gets called when the triggering event is actually
invoked. The other functions are used to list the trigger when
needed, along with a couple mundane book-keeping functions.
This also moves event_file_data() into trace.h so it can be used
outside of trace_events.c.
Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Idea-by: Steve Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
|
|
For NUMA systems, initializing the blk-mq layer and using per node hctx.
We initialize submit queues to 1, while blk-mq nr_hw_queues is
initialized to the number of NUMA nodes.
This makes the null_init_hctx function overwrite memory outside of what
it allocated. In my case it lead to writing garbage into struct
request_queue's mq_map.
Signed-off-by: Matias Bjorling <m@bjorling.me>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
radeon_hwmon_show_temp_thresh()
Since commit ec39f64bba34 ("drm/radeon/dpm: Convert to use
devm_hwmon_register_with_groups") radeon_hwmon_init() is using
hwmon_device_register_with_groups(), which sets `rdev' as a device
private driver_data, while hwmon_attributes_visible() and
radeon_hwmon_show_temp_thresh() are still waiting for `drm_device'.
Fix them by using dev_get_drvdata(), in order to avoid this oops:
BUG: unable to handle kernel paging request at 0000000000001e28
IP: [<ffffffffa02ae8b4>] hwmon_attributes_visible+0x18/0x3d [radeon]
PGD 15057e067 PUD 151a8e067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
Call Trace:
internal_create_group+0x114/0x1d9
sysfs_create_group+0xe/0x10
sysfs_create_groups+0x22/0x5f
device_add+0x34f/0x501
device_register+0x15/0x18
hwmon_device_register_with_groups+0xb5/0xed
radeon_hwmon_init+0x56/0x7c [radeon]
radeon_pm_init+0x134/0x7e5 [radeon]
radeon_modeset_init+0x75f/0x8ed [radeon]
radeon_driver_load_kms+0xc6/0x187 [radeon]
drm_dev_register+0xf9/0x1b4 [drm]
drm_get_pci_dev+0x98/0x129 [drm]
radeon_pci_probe+0xa3/0xac [radeon]
pci_device_probe+0x6e/0xcf
driver_probe_device+0x98/0x1c4
__driver_attach+0x5c/0x7e
bus_for_each_dev+0x7b/0x85
driver_attach+0x19/0x1b
bus_add_driver+0x104/0x1ce
driver_register+0x89/0xc5
__pci_register_driver+0x58/0x5b
drm_pci_init+0x86/0xea [drm]
radeon_init+0x97/0x1000 [radeon]
do_one_initcall+0x7f/0x117
load_module+0x1583/0x1bb4
SyS_init_module+0xa0/0xaf
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking fixes from David Miller:
1) Revert CHECKSUM_COMPLETE optimization in pskb_trim_rcsum(), I can't
figure out why it breaks things.
2) Fix comparison in netfilter ipset's hash_netnet4_data_equal(), it
was basically doing "x == x", from Dave Jones.
3) Freescale FEC driver was DMA mapping the wrong number of bytes, from
Sebastian Siewior.
4) Blackhole and prohibit routes in ipv6 were not doing the right thing
because their ->input and ->output methods were not being assigned
correctly. Now they behave properly like their ipv4 counterparts.
From Kamala R.
5) Several drivers advertise the NETIF_F_FRAGLIST capability, but
really do not support this feature and will send garbage packets if
fed fraglist SKBs. From Eric Dumazet.
6) Fix long standing user triggerable BUG_ON over loopback in RDS
protocol stack, from Venkat Venkatsubra.
7) Several not so common code paths can potentially try to invoke
packet scheduler actions that might be NULL without checking. Shore
things up by either 1) defining a method as mandatory and erroring
on registration if that method is NULL 2) defininig a method as
optional and the registration function hooks up a default
implementation when NULL is seen. From Jamal Hadi Salim.
8) Fix fragment detection in xen-natback driver, from Paul Durrant.
9) Kill dangling enter_memory_pressure method in cg_proto ops, from
Eric W Biederman.
10) SKBs that traverse namespaces should have their local_df cleared,
from Hannes Frederic Sowa.
11) IOCB file position is not being updated by macvtap_aio_read() and
tun_chr_aio_read(). From Zhi Yong Wu.
12) Don't free virtio_net netdev before releasing all of the NAPI
instances. From Andrey Vagin.
13) Procfs entry leak in xt_hashlimit, from Sergey Popovich.
14) IPv6 routes that are no cached routes should not count against the
garbage collection limits. We had this almost right, but were
missing handling addrconf generated routes properly. From Hannes
Frederic Sowa.
15) fib{4,6}_rule_suppress() have to consider potentially seeing NULL
route info when they are called, from Stefan Tomanek.
16) TUN and MACVTAP have had truncated packet signalling for some time,
fix from Jason Wang.
17) Fix use after frrr in __udp4_lib_rcv(), from Eric Dumazet.
18) xen-netback does not interpret the NAPI budget properly for TX work,
fix from Paul Durrant.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits)
igb: Fix for issue where values could be too high for udelay function.
i40e: fix null dereference
xen-netback: fix gso_prefix check
net: make neigh_priv_len in struct net_device 16bit instead of 8bit
drivers: net: cpsw: fix for cpsw crash when build as modules
xen-netback: napi: don't prematurely request a tx event
xen-netback: napi: fix abuse of budget
sch_tbf: use do_div() for 64-bit divide
udp: ipv4: must add synchronization in udp_sk_rx_dst_set()
net:fec: remove duplicate lines in comment about errata ERR006358
Revert "8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature"
8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature
xen-netback: make sure skb linear area covers checksum field
net: smc91x: Fix device tree based configuration so it's usable
udp: ipv4: fix potential use after free in udp_v4_early_demux()
macvtap: signal truncated packets
tun: unbreak truncated packet signalling
net: sched: htb: fix the calculation of quantum
net: sched: tbf: fix the calculation of max_size
micrel: add support for KSZ8041RNLI
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"This is a pretty small batch:
The biggest single change is to stop using EFI time services on 32-bit
platforms. This matches our current behavior on 64-bit platforms as
we already had ruled them out there as being too unreliable. Turns
out that affects 32-bit platforms, too.
One NULL pointer fix for SGI UV.
Two minor build fixes, one of which only affects icc and the other
which affects icc and future versions or nonstandard default settings
of gcc"
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, efi: Don't use (U)EFI time services on 32 bit
x86, build, icc: Remove uninitialized_var() from compiler-intel.h
x86/UV: Fix NULL pointer dereference in uv_flush_tlb_others() if the 'nobau' boot option is used
x86, build: Pass in additional -mno-mmx, -mno-sse options
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"PCI device hotplug
- Move device_del() from pci_stop_dev() to pci_destroy_dev() (Rafael
Wysocki)
Host bridge drivers
- Update maintainers for DesignWare, i.MX6, Armada, R-Car (Bjorn
Helgaas)
- mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin
(Jason Gunthorpe)
Miscellaneous
- Avoid unnecessary CPU switch when calling .probe() (Alexander
Duyck)
- Revert "workqueue: allow work_on_cpu() to be called recursively"
(Bjorn Helgaas)
- Disable Bus Master only on kexec reboot (Khalid Aziz)
- Omit PCI ID macro strings to shorten quirk names for LTO (Michal
Marek)"
* tag 'pci-v3.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers
PCI: Disable Bus Master only on kexec reboot
PCI: mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin
PCI: Omit PCI ID macro strings to shorten quirk names
PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
Revert "workqueue: allow work_on_cpu() to be called recursively"
PCI: Avoid unnecessary CPU switch when calling driver .probe() method
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull SELinux fixes from James Morris.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
selinux: process labeled IPsec TCP SYN-ACK packets properly in selinux_ip_postroute()
selinux: look for IPsec labels on both inbound and outbound packets
selinux: handle TCP SYN-ACK packets correctly in selinux_ip_postroute()
selinux: handle TCP SYN-ACK packets correctly in selinux_ip_output()
selinux: fix possible memory leak
|
|
This reverts commit 102aefdda4d8275ce7d7100bc16c88c74272b260.
Tom London reports that it causes sync() to hang on Fedora rawhide:
https://bugzilla.redhat.com/show_bug.cgi?id=1033965
and Josh Boyer bisected it down to this commit. Reverting the commit in
the rawhide kernel fixes the problem.
Eric Paris root-caused it to incorrect subtype matching in that commit
breaking fuse, and has a tentative patch, but by now we're better off
retrying this in 3.14 rather than playing with it any more.
Reported-by: Tom London <selinux@gmail.com>
Bisected-by: Josh Boyer <jwboyer@fedoraproject.org>
Acked-by: Eric Paris <eparis@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Anand Avati <avati@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch changes the igb_phy_has_link function to check the value of the
parameter before deciding to use udelay or mdelay in order to be sure that
the value is not too high for udelay function.
CC: stable kernel <stable@vger.kernel.org> # 3.9+
Signed-off-by: Sunil K Pandey <sunil.k.pandey@intel.com>
Signed-off-by: Kevin B Smith <kevin.b.smith@intel.com>
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the vsi->tx_rings structure is NULL we don't want to panic.
Change-Id: Ic694f043701738c434e8ebe0caf0673f4410dc10
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC fix from Borislav Petkov:
"Silence a compiler warning in sb_edac"
* tag 'edac_fixes_for_3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
sb_edac: Shut up compiler warning when EDAC_DEBUG is enabled
|
