summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-02-06cfg80211/mac80211: userspace peer authorization in IBSSAntonio Quartulli
If the IBSS network is RSN-protected, let userspace authorize the stations instead of adding them as AUTHORIZED by default. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06rtlwifi: Remove extra debugging message accidentally left inLarry Finger
In commit b0302aba812bcc39291cdab9ad7e37008f352a91, an extra debugging message that is spamming the logs was not deleted before submission. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06rtlwifi: Fix typo in dm.cMasanari Iida
Correct a spelling "disconnet" to "disconnect" in drivers/net/wireless/rtlwifi/rtl8192de/dm.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwmc3200wifi: Fix typo in trace.hMasanari Iida
Correct spelling "embeded" to "embedded" in drivers/net/wireless/iwmc3200wifi/trace.h Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06rtlwifi: remove return in _rtl_pci_switch_clk_reqDevendra.Naga
the return value from _rtl_pci_switch_clk_req is not used by any of its callers. Signed-off-by: Devendra.Naga <devendra.aaru@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: add extra sprom checkHauke Mehrtens
This check is needed on the BCM43224 device as it says in the capabilities it has an sprom but is extra check says it has not. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: add bus num counterHauke Mehrtens
If we have two bcma buses on one computer the second will not work without this patch. Now each bus gets an own number. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: add PCIe host controllerHauke Mehrtens
Some SoCs have a PCIe host controller to make it possible to attach some other devices to it, like an other Wifi card. This code was tested with an Netgear WNDR3400 (bcm4716 based), but should work with all bcma based SoCs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: make some functions __devinitHauke Mehrtens
bcma_core_pci_hostmode_init() has to be in __devinit as it will call a function in that section and so all functions calling it also have to be in __devinit. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: export bcma_pcie_read()Hauke Mehrtens
This will be needed by the host controller. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: add constants for PCI and use themHauke Mehrtens
There are many magic numbers used in the PCIe code. Replace them with some constants from the Broadcom SDK and also use them in the pcie host controller. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06bcma: add the core unit numberHauke Mehrtens
Some SoCs have two pcie or gmac cores and we need to know the number of the specific core on the bus. This is the case for the BCM4706. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06rt2800: document RF_R03 register bits [7:4]Stanislaw Gruszka
Taken from: 2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO (based on function RT33xx_ChipSwitchChannel) Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06rt2800: radio 3xxxx: channel switch RX/TX calibration fixesStanislaw Gruszka
Synchronize code with Ralink driver: 2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO Based on functions: RT30xx_ChipSwitchChannel RT33xx_ChipSwitchChannel NICInitRT3370RFRegisters and defines from: include/chip/rt33xx.h Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06rt2800: radio 3xxx: add channel switch calibration routinesStanislaw Gruszka
Synchronize code with Ralink driver: 2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO Based on functions: RT33xx_ChipSwitchChannel RT30xx_ChipSwitchChannel Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06rt2800: radio 3xxx: program RF_R1 during channel switchStanislaw Gruszka
Synchronize code with Ralink driver: 2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO Based on functions: RT33xx_ChipSwitchChannel RT30xx_ChipSwitchChannel RT33xx_Init Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06rt2800: radio 3xxx: reprogram only lower bits of RF_R3Stanislaw Gruszka
Synchronize code with Ralink driver: 2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO (functions: RT33xx_ChipSwitchChannel() and RT30xx_ChipSwitchChannel()) Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06net: Fix typo in ipw2x00/libipw_rx.cMasanari Iida
Correct spelling in "suppported" to "supported" in drivers/net/wireless/ipw2x00/libipw_rx.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Reviewed-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: redesign auth/assocJohannes Berg
This is the second part of the auth/assoc redesign, the mac80211 part. This moves the auth/assoc code out of the work abstraction and into the MLME, so that we don't flip channels all the time etc. The only downside is that when we are associated, we need to drop the association in order to create a connection to another AP, but for most drivers this is actually desirable and the ability to do was never used by any applications. If we want to implement resource reservation with FT-OTA, we'd probably best do it with explicit R-O-C in wpa_s. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06cfg80211: export cfg80211_ref_bssJohannes Berg
This is needed by mac80211 to keep a reference to a BSS alive for the auth process. Remove the old version of cfg80211_ref_bss() since it's not actually used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06cfg80211: stop tracking authenticated stateJohannes Berg
To track authenticated state seems to have been a design mistake in cfg80211. It is possible to have out of band authentication (FT), tracking multiple authentications caused more problems than it ever helped, and the implementation in mac80211 is too complex. Remove all this complexity, and let userspace do whatever it wants to, mac80211 can deal with that just fine. Association is still tracked of course, but authentication no longer is. Local auth state changes are thus no longer of value, so ignore them completely. This will also help implement SAE -- asking the driver to do an authentication is now almost equivalent to sending an authentication frame, with the exception of shared key authentication which is still handled completely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: remove dummy STA supportJohannes Berg
The dummy STA support was added because I didn't want to change the driver API at the time. Now that we have state transitions triggering station add/remove in the driver, we only call add once a station reaches ASSOCIATED, so we can remove the dummy station stuff again. While at it, tighten the RX check and accept only port control (EAP) frames from the AP station if it's not associated yet -- in other cases there's no race. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: implement sta_add/sta_remove in sta_stateJohannes Berg
Instead of maintaining separate sta_add/sta_remove callsites, implement it in sta_state when the driver has no sta_state implementation. The only behavioural change this should cause is in secure mesh mode: with this the station entries will only be created after the stations are set to AUTH. Given which drivers support mesh, this seems to not be a problem. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: add sta_state callbackJohannes Berg
(based on Eliad's patch) Add a callback to notify the low-level driver whenever the state of a station changes. The driver is only notified when the station is actually in the mac80211 hash table, not for pre-insert state transitions. To allow the driver to replace sta_add/remove calls with this, call extra transitions with the NOTEXIST state. This callback can fail, so we need to be careful in handling it when a station is inserted, particularly in the IBSS case where we still keep the station entry around for mac80211 purposes. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: add NOTEXIST station stateJohannes Berg
This will be used by drivers later if they need to have stations inserted all the time, in mac80211 has no purpose, is never used and sta_state starts out in NONE. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: dont program keys for stations not uploadedJohannes Berg
If a station couldn't be uploaded to the driver but is still kept (only in IBSS mode) we still shouldn't try to program the keys for it into hardware; fix this bug by skipping the key upload in this case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: simplify AP_VLAN handlingJohannes Berg
Setting keys and updating TKIP keys must use the BSS sdata (not AP_VLAN), so we translate. Move the translation into driver-ops wrappers instead of having it inline in the code to simplify the normal code flow. The same can be done for sta_add/remove which already does the translation in the wrapper. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06mac80211: move managed mode station state modificationJohannes Berg
Move the station state modification right before insert, this just makes the current code more readable (you can tell that it's before insertion looking at a single screenful of code) right now, but some upcoming changes will require this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06Merge branch 'wireless-next' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi
2012-02-06Merge branch 'for-linville' of git://github.com/kvalo/ath6klJohn W. Linville
2012-02-02iwlwifi: range check to testmode direct reg accessAmit Beka
Added a check on the direct register access. Checks that the address is in the lower ragnge (0x0-0x2000), which belongs to CSR, HBUS and FH registers. Signed-off-by: Amit Beka <amit.beka@intel.com> Signed-off-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: release IRQ in error pathJohannes Berg
smatch correctly complains: iwl-trans-pcie.c +1528 iwl_trans_pcie_start_hw(50) warn: 'trans->irq' was not released on error Fix it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: move all ucode routines to iwl-ucode.cDon Fry
The routines dealing with the ucode are spread through several files. Move them all to the same file and create a iwl-ucode.h file with the ucode file definitions. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: move bcast_sta_id init to common routineDon Fry
There is nothing device specific in the initialization of the bcast_sta_id so move it to the common inititalization routine. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: clarify commentDon Fry
change a comment to be a little more clear Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: debug print in tx_queue_set_status is more clearEmmanuel Grumbach
The message was misleading when a queue is deactivated. The fifo number is irrelevant then, so don't print it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: stop_hw replace enable_rfkill_intEmmanuel Grumbach
This trans_ops->stop_hw leaves the RFKILL interrupt enabled, we can call that one instead of enable_rfkill_int. By that, we reduce the numbers of acceesses to the NIC from the upper layers. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: move hw_rev to transport layerEmmanuel Grumbach
The HW revision is now read by the transport layer in its allocation. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: kill bus_get_hw_idEmmanuel Grumbach
Get this information from the transport layer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: kill bus_get_hw_id_stringEmmanuel Grumbach
Get this information from the transport layer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: kill bus_is_pm_supportedEmmanuel Grumbach
Get this information from the transport layer which is now in charge of the APM too. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: kill bus_apm_configEmmanuel Grumbach
This handler was called from the transport layer only. Merge it to the transport's apm_init. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: consolidate the start_device flowEmmanuel Grumbach
Now there is only one transport function that launch a specific fw: trans_ops->start_fw. This one replaces trans_ops->start_device and trans_ops->kick_nic. The code that actually loads the fw to the device has been moved to the transport specific code. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: move the RF kill logic from iwl_probe to transportEmmanuel Grumbach
This is another clean up of the proble flow. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: introduce trans_ops->stop_hwEmmanuel Grumbach
This handler stops the HW and puts it in low power state. It will allow to clean up the flows in the upper layers. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: move apm_init to start_hwEmmanuel Grumbach
This is transport related Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: move prepare_card_hw to start_hwEmmanuel Grumbach
Kill the trans_ops->prepare_card_hw which is now useless. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: rename trans_ops->request_irq to trans_ops->start_hwEmmanuel Grumbach
This handler will become thicker, reflect its real role now. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: don't use the bus for ucode fw_desc any moreEmmanuel Grumbach
This is transport related Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-02iwlwifi: remove the pointer to dev from the bus layerEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-25 21:20:39 +0000