summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-17smp: Process pending softirqs in flush_smp_call_function_from_idle()Sebastian Andrzej Siewior
send_call_function_single_ipi() may wake an idle CPU without sending an IPI. The woken up CPU will process the SMP-functions in flush_smp_call_function_from_idle(). Any raised softirq from within the SMP-function call will not be processed. Should the CPU have no tasks assigned, then it will go back to idle with pending softirqs and the NOHZ will rightfully complain. Process pending softirqs on return from flush_smp_call_function_queue(). Fixes: b2a02fc43a1f4 ("smp: Optimize send_call_function_single_ipi()") Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210123201027.3262800-2-bigeasy@linutronix.de
2021-02-17sched: Harden PREEMPT_DYNAMICPeter Zijlstra
Use the new EXPORT_STATIC_CALL_TRAMP() / static_call_mod() to unexport the static_call_key for the PREEMPT_DYNAMIC calls such that modules can no longer update these calls. Having modules change/hi-jack the preemption calls would be horrible. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-17static_call: Allow module use without exposing static_call_keyJosh Poimboeuf
When exporting static_call_key; with EXPORT_STATIC_CALL*(), the module can use static_call_update() to change the function called. This is not desirable in general. Not exporting static_call_key however also disallows usage of static_call(), since objtool needs the key to construct the static_call_site. Solve this by allowing objtool to create the static_call_site using the trampoline address when it builds a module and cannot find the static_call_key symbol. The module loader will then try and map the trampole back to a key before it constructs the normal sites list. Doing this requires a trampoline -> key associsation, so add another magic section that keeps those. Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210127231837.ifddpn7rhwdaepiu@treble
2021-02-17sched: Add /debug/sched_preemptPeter Zijlstra
Add a debugfs file to muck about with the preempt mode at runtime. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/YAsGiUYf6NyaTplX@hirez.programming.kicks-ass.net
2021-02-17preempt/dynamic: Support dynamic preempt with preempt= boot optionPeter Zijlstra (Intel)
Support the preempt= boot option and patch the static call sites accordingly. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-9-frederic@kernel.org
2021-02-17preempt/dynamic: Provide irqentry_exit_cond_resched() static callPeter Zijlstra (Intel)
Provide static call to control IRQ preemption (called in CONFIG_PREEMPT) so that we can override its behaviour when preempt= is overriden. Since the default behaviour is full preemption, its call is initialized to provide IRQ preemption when preempt= isn't passed. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-8-frederic@kernel.org
2021-02-17preempt/dynamic: Provide preempt_schedule[_notrace]() static callsPeter Zijlstra (Intel)
Provide static calls to control preempt_schedule[_notrace]() (called in CONFIG_PREEMPT) so that we can override their behaviour when preempt= is overriden. Since the default behaviour is full preemption, both their calls are initialized to the arch provided wrapper, if any. [fweisbec: only define static calls when PREEMPT_DYNAMIC, make it less dependent on x86 with __preempt_schedule_func] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-7-frederic@kernel.org
2021-02-17preempt/dynamic: Provide cond_resched() and might_resched() static callsPeter Zijlstra (Intel)
Provide static calls to control cond_resched() (called in !CONFIG_PREEMPT) and might_resched() (called in CONFIG_PREEMPT_VOLUNTARY) to that we can override their behaviour when preempt= is overriden. Since the default behaviour is full preemption, both their calls are ignored when preempt= isn't passed. [fweisbec: branch might_resched() directly to __cond_resched(), only define static calls when PREEMPT_DYNAMIC] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-6-frederic@kernel.org
2021-02-17preempt: Introduce CONFIG_PREEMPT_DYNAMICMichal Hocko
Preemption mode selection is currently hardcoded on Kconfig choices. Introduce a dedicated option to tune preemption flavour at boot time, This will be only available on architectures efficiently supporting static calls in order not to tempt with the feature against additional overhead that might be prohibitive or undesirable. CONFIG_PREEMPT_DYNAMIC is automatically selected by CONFIG_PREEMPT if the architecture provides the necessary support (CONFIG_STATIC_CALL_INLINE, CONFIG_GENERIC_ENTRY, and provide with __preempt_schedule_function() / __preempt_schedule_notrace_function()). Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> [peterz: relax requirement to HAVE_STATIC_CALL] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-5-frederic@kernel.org
2021-02-17static_call: Provide DEFINE_STATIC_CALL_RET0()Frederic Weisbecker
DECLARE_STATIC_CALL() must pass the original function targeted for a given static call. But DEFINE_STATIC_CALL() may want to initialize it as off. In this case we can't pass NULL (for functions without return value) or __static_call_return0 (for functions returning a value) directly to DEFINE_STATIC_CALL() as that may trigger a static call redeclaration with a different function prototype. Type casts neither can work around that as they don't get along with typeof(). The proper way to do that for functions that don't return a value is to use DEFINE_STATIC_CALL_NULL(). But functions returning a actual value don't have an equivalent yet. Provide DEFINE_STATIC_CALL_RET0() to solve this situation. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-3-frederic@kernel.org
2021-02-17static_call/x86: Add __static_call_return0()Peter Zijlstra
Provide a stub function that return 0 and wire up the static call site patching to replace the CALL with a single 5 byte instruction that clears %RAX, the return value register. The function can be cast to any function pointer type that has a single %RAX return (including pointers). Also provide a version that returns an int for convenience. We are clearing the entire %RAX register in any case, whether the return value is 32 or 64 bits, since %RAX is always a scratch register anyway. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-2-frederic@kernel.org
2021-02-17static_call: Pull some static_call declarations to the type headersPeter Zijlstra
Some static call declarations are going to be needed on low level header files. Move the necessary material to the dedicated static call types header to avoid inclusion dependency hell. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210118141223.123667-4-frederic@kernel.org
2021-02-17sched/core: Update task_prio() function headerDietmar Eggemann
The description of the RT offset and the values for 'normal' tasks needs update. Moreover there are DL tasks now. task_prio() has to stay like it is to guarantee compatibility with the /proc/<pid>/stat priority field: # cat /proc/<pid>/stat | awk '{ print $18; }' Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210128131040.296856-4-dietmar.eggemann@arm.com
2021-02-17sched: Remove USER_PRIO, TASK_USER_PRIO and MAX_USER_PRIODietmar Eggemann
The only remaining use of MAX_USER_PRIO (and USER_PRIO) is the SCALE_PRIO() definition in the PowerPC Cell architecture's Synergistic Processor Unit (SPU) scheduler. TASK_USER_PRIO isn't used anymore. Commit fe443ef2ac42 ("[POWERPC] spusched: Dynamic timeslicing for SCHED_OTHER") copied SCALE_PRIO() from the task scheduler in v2.6.23. Commit a4ec24b48dde ("sched: tidy up SCHED_RR") removed it from the task scheduler in v2.6.24. Commit 3ee237dddcd8 ("sched/prio: Add 3 macros of MAX_NICE, MIN_NICE and NICE_WIDTH in prio.h") introduced NICE_WIDTH much later. With: MAX_USER_PRIO = USER_PRIO(MAX_PRIO) = MAX_PRIO - MAX_RT_PRIO MAX_PRIO = MAX_RT_PRIO + NICE_WIDTH MAX_USER_PRIO = MAX_RT_PRIO + NICE_WIDTH - MAX_RT_PRIO MAX_USER_PRIO = NICE_WIDTH MAX_USER_PRIO can be replaced by NICE_WIDTH to be able to remove all the {*_}USER_PRIO defines. Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210128131040.296856-3-dietmar.eggemann@arm.com
2021-02-17sched: Remove MAX_USER_RT_PRIODietmar Eggemann
Commit d46523ea32a7 ("[PATCH] fix MAX_USER_RT_PRIO and MAX_RT_PRIO") was introduced due to a a small time period in which the realtime patch set was using different values for MAX_USER_RT_PRIO and MAX_RT_PRIO. This is no longer true, i.e. now MAX_RT_PRIO == MAX_USER_RT_PRIO. Get rid of MAX_USER_RT_PRIO and make everything use MAX_RT_PRIO instead. Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210128131040.296856-2-dietmar.eggemann@arm.com
2021-02-17sched/topology: Fix sched_domain_topology_level alloc in sched_init_numa()Dietmar Eggemann
Commit "sched/topology: Make sched_init_numa() use a set for the deduplicating sort" allocates 'i + nr_levels (level)' instead of 'i + nr_levels + 1' sched_domain_topology_level. This led to an Oops (on Arm64 juno with CONFIG_SCHED_DEBUG): sched_init_domains build_sched_domains() __free_domain_allocs() __sdt_free() { ... for_each_sd_topology(tl) ... sd = *per_cpu_ptr(sdd->sd, j); <-- ... } Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Vincent Guittot <vincent.guittot@linaro.org> Tested-by: Barry Song <song.bao.hua@hisilicon.com> Link: https://lkml.kernel.org/r/6000e39e-7d28-c360-9cd6-8798fd22a9bf@arm.com
2021-02-17rbtree, timerqueue: Use rb_add_cached()Peter Zijlstra
Reduce rbtree boiler plate by using the new helpers. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Davidlohr Bueso <dbueso@suse.de>
2021-02-17rbtree, rtmutex: Use rb_add_cached()Peter Zijlstra
Reduce rbtree boiler plate by using the new helpers. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Davidlohr Bueso <dbueso@suse.de>
2021-02-17rbtree, uprobes: Use rbtree helpersPeter Zijlstra
Reduce rbtree boilerplate by using the new helpers. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Davidlohr Bueso <dbueso@suse.de>
2021-02-17rbtree, perf: Use new rbtree helpersPeter Zijlstra
Reduce rbtree boiler plate by using the new helpers. One noteworthy change is unification of the various (partial) compare functions. We construct a subtree match by forcing the sub-order to always match, see __group_cmp(). Due to 'const' we had to touch cgroup_id(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Davidlohr Bueso <dbueso@suse.de>
2021-02-17rbtree, sched/deadline: Use rb_add_cached()Peter Zijlstra
Reduce rbtree boiler plate by using the new helpers. Make rb_add_cached() / rb_erase_cached() return a pointer to the leftmost node to aid in updating additional state. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Davidlohr Bueso <dbueso@suse.de>
2021-02-17rbtree, sched/fair: Use rb_add_cached()Peter Zijlstra
Reduce rbtree boiler plate by using the new helper function. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Davidlohr Bueso <dbueso@suse.de>
2021-02-17rbtree: Add generic add and find helpersPeter Zijlstra
I've always been bothered by the endless (fragile) boilerplate for rbtree, and I recently wrote some rbtree helpers for objtool and figured I should lift them into the kernel and use them more widely. Provide: partial-order; less() based: - rb_add(): add a new entry to the rbtree - rb_add_cached(): like rb_add(), but for a rb_root_cached total-order; cmp() based: - rb_find(): find an entry in an rbtree - rb_find_add(): find an entry, and add if not found - rb_find_first(): find the first (leftmost) matching entry - rb_next_match(): continue from rb_find_first() - rb_for_each(): iterate a sub-tree using the previous two Inlining and constant propagation should see the compiler inline the whole thing, including the various compare functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Michel Lespinasse <walken@google.com> Acked-by: Davidlohr Bueso <dbueso@suse.de>
2021-02-17sched/fair: Merge select_idle_core/cpu()Mel Gorman
Both select_idle_core() and select_idle_cpu() do a loop over the same cpumask. Observe that by clearing the already visited CPUs, we can fold the iteration and iterate a core at a time. All we need to do is remember any non-idle CPU we encountered while scanning for an idle core. This way we'll only iterate every CPU once. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20210127135203.19633-5-mgorman@techsingularity.net
2021-02-17sched/fair: Remove select_idle_smt()Mel Gorman
In order to make the next patch more readable, and to quantify the actual effectiveness of this pass, start by removing it. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20210125085909.4600-4-mgorman@techsingularity.net
2021-02-17Merge tag 'v5.11' into sched/core, to pick up fixes & refresh the branchIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-17Merge branch 'perf/kprobes' into perf/core, to pick up finished branchIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-16net: re-solve some conflicts after net -> net-next mergeJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2021-02-16net: dsa: tag_rtl4_a: Support also egress tagsLinus Walleij
Support also transmitting frames using the custom "8899 A" 4 byte tag. Qingfang came up with the solution: we need to pad the ethernet frame to 60 bytes using eth_skb_pad(), then the switch will happily accept frames with custom tags. Cc: Mauri Sandberg <sandberg@mailfence.com> Reported-by: DENG Qingfang <dqfext@gmail.com> Fixes: efd7fe68f0c6 ("net: dsa: tag_rtl4_a: Implement Realtek 4 byte A tag") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16Merge branch 'broadcom-next'David S. Miller
Robert Hancock says: ==================== Broadcom PHY driver updates Updates to the Broadcom PHY driver related to use with copper SFP modules. Changed since v3: -fixed kerneldoc error Changed since v2: -Create flag for PHY on SFP module and use that rather than accessing attached_dev directly in PHY driver Changed since v1: -Reversed conditional to reduce indentation -Added missing setting of MII_BCM54XX_AUXCTL_MISC_WREN in MII_BCM54XX_AUXCTL_SHDWSEL_MISC register ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: broadcom: Do not modify LED configuration for SFP module PHYsRobert Hancock
bcm54xx_config_init was modifying the PHY LED configuration to enable link and activity indications. However, some SFP modules (such as Bel-Fuse SFP-1GBT-06) have no LEDs but use the LED outputs to control the SFP LOS signal, and modifying the LED settings will cause the LOS output to malfunction. Skip this configuration for PHYs which are bound to an SFP bus. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: Add is_on_sfp_module flag and phy_on_sfp helperRobert Hancock
Add a flag and helper function to indicate that a PHY device is part of an SFP module, which is set on attach. This can be used by PHY drivers to handle SFP-specific quirks or behavior. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: broadcom: Set proper 1000BaseX/SGMII interface mode for BCM54616SRobert Hancock
The default configuration for the BCM54616S PHY may not match the desired mode when using 1000BaseX or SGMII interface modes, such as when it is on an SFP module. Add code to explicitly set the correct mode using programming sequences provided by Bel-Fuse: https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-05-series.pdf https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-06-series.pdf Signed-off-by: Robert Hancock <robert.hancock@calian.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16lan743x: sync only the received area of an rx ring bufferSven Van Asbroeck
On cpu architectures w/o dma cache snooping, dma_unmap() is a is a very expensive operation, because its resulting sync needs to invalidate cpu caches. Increase efficiency/performance by syncing only those sections of the lan743x's rx ring buffers that are actually in use. Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16lan743x: boost performance on cpu archs w/o dma cache snoopingSven Van Asbroeck
The buffers in the lan743x driver's receive ring are always 9K, even when the largest packet that can be received (the mtu) is much smaller. This performs particularly badly on cpu archs without dma cache snooping (such as ARM): each received packet results in a 9K dma_{map|unmap} operation, which is very expensive because cpu caches need to be invalidated. Careful measurement of the driver rx path on armv7 reveals that the cpu spends the majority of its time waiting for cache invalidation. Optimize by keeping the rx ring buffer size as close as possible to the mtu. This limits the amount of cache that requires invalidation. This optimization would normally force us to re-allocate all ring buffers when the mtu is changed - a disruptive event, because it can only happen when the network interface is down. Remove the need to re-allocate all ring buffers by adding support for multi-buffer frames. Now any combination of mtu and ring buffer size will work. When the mtu changes from mtu1 to mtu2, consumed buffers of size mtu1 are lazily replaced by newly allocated buffers of size mtu2. These optimizations double the rx performance on armv7. Third parties report 3x rx speedup on armv8. Tested with iperf3 on a freescale imx6qp + lan7430, both sides set to mtu 1500 bytes, measure rx performance: Before: [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-20.00 sec 550 MBytes 231 Mbits/sec 0 After: [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-20.00 sec 1.33 GBytes 570 Mbits/sec 0 Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: enetc: fix destroyed phylink dereference during unbindVladimir Oltean
The following call path suggests that calling unregister_netdev on an interface that is up will first bring it down. enetc_pf_remove -> unregister_netdev -> unregister_netdevice_queue -> unregister_netdevice_many -> dev_close_many -> __dev_close_many -> enetc_close -> enetc_stop -> phylink_stop However, enetc first destroys the phylink instance, then calls unregister_netdev. This is already dissimilar to the setup (and error path teardown path) from enetc_pf_probe, but more than that, it is buggy because it is invalid to call phylink_stop after phylink_destroy. So let's first unregister the netdev (and let the .ndo_stop events consume themselves), then destroy the phylink instance, then free the netdev. Fixes: 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16Merge branch 'net-mvneta-implement-basic-MQPrio-support'David S. Miller
Maxime Chevallier says: ==================== net: mvneta: implement basic MQPrio support This is V2 for the MQPrio support in mvneta. This small series adds basic support for mqprio offloading, by having the rx queueing mirroring the TCs based on VLAN prio fields. This was tested on Armada 3700, and proves useful to make sure high-priority traffic has a better chance not getting dropped when there's lots of packets incoming. The first patch of the series deals with the per-cpu interrupts on the armada 3700. Since they don't work, there were already some patches applied to keep all queue mappings to CPU0, but there still were some remaining mappings left to be dealt with. The second patch implements the MQPrio offloading for the receive path. Changes in V2 : - Add a Fixes tag for the first patch - Fix some warnings and the xmas tree in the second patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: mvneta: Implement mqprio supportMaxime Chevallier
Implement a basic MQPrio support, inserting rules in RX that translate the TC to prio mapping into vlan prio to queues. The TX logic stays the same as when we don't offload the qdisc. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: mvneta: Remove per-cpu queue mapping for Armada 3700Maxime Chevallier
According to Errata #23 "The per-CPU GbE interrupt is limited to Core 0", we can't use the per-cpu interrupt mechanism on the Armada 3700 familly. This is correctly checked for RSS configuration, but the initial queue mapping is still done by having the queues spread across all the CPUs in the system, both in the init path and in the cpu_hotplug path. Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: sched: fix police ext initializationVlad Buslov
When police action is created by cls API tcf_exts_validate() first conditional that calls tcf_action_init_1() directly, the action idr is not updated according to latest changes in action API that require caller to commit newly created action to idr with tcf_idr_insert_many(). This results such action not being accessible through act API and causes crash reported by syzbot: ================================================================== BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:71 [inline] BUG: KASAN: null-ptr-deref in atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] BUG: KASAN: null-ptr-deref in __tcf_idr_release net/sched/act_api.c:178 [inline] BUG: KASAN: null-ptr-deref in tcf_idrinfo_destroy+0x129/0x1d0 net/sched/act_api.c:598 Read of size 4 at addr 0000000000000010 by task kworker/u4:5/204 CPU: 0 PID: 204 Comm: kworker/u4:5 Not tainted 5.11.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 __kasan_report mm/kasan/report.c:400 [inline] kasan_report.cold+0x5f/0xd5 mm/kasan/report.c:413 check_memory_region_inline mm/kasan/generic.c:179 [inline] check_memory_region+0x13d/0x180 mm/kasan/generic.c:185 instrument_atomic_read include/linux/instrumented.h:71 [inline] atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] __tcf_idr_release net/sched/act_api.c:178 [inline] tcf_idrinfo_destroy+0x129/0x1d0 net/sched/act_api.c:598 tc_action_net_exit include/net/act_api.h:151 [inline] police_exit_net+0x168/0x360 net/sched/act_police.c:390 ops_exit_list+0x10d/0x160 net/core/net_namespace.c:190 cleanup_net+0x4ea/0xb10 net/core/net_namespace.c:604 process_one_work+0x98d/0x15f0 kernel/workqueue.c:2275 worker_thread+0x64c/0x1120 kernel/workqueue.c:2421 kthread+0x3b1/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:296 ================================================================== Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 204 Comm: kworker/u4:5 Tainted: G B 5.11.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 panic+0x306/0x73d kernel/panic.c:231 end_report+0x58/0x5e mm/kasan/report.c:100 __kasan_report mm/kasan/report.c:403 [inline] kasan_report.cold+0x67/0xd5 mm/kasan/report.c:413 check_memory_region_inline mm/kasan/generic.c:179 [inline] check_memory_region+0x13d/0x180 mm/kasan/generic.c:185 instrument_atomic_read include/linux/instrumented.h:71 [inline] atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] __tcf_idr_release net/sched/act_api.c:178 [inline] tcf_idrinfo_destroy+0x129/0x1d0 net/sched/act_api.c:598 tc_action_net_exit include/net/act_api.h:151 [inline] police_exit_net+0x168/0x360 net/sched/act_police.c:390 ops_exit_list+0x10d/0x160 net/core/net_namespace.c:190 cleanup_net+0x4ea/0xb10 net/core/net_namespace.c:604 process_one_work+0x98d/0x15f0 kernel/workqueue.c:2275 worker_thread+0x64c/0x1120 kernel/workqueue.c:2421 kthread+0x3b1/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:296 Kernel Offset: disabled Fix the issue by calling tcf_idr_insert_many() after successful action initialization. Fixes: 0fedc63fadf0 ("net_sched: commit action insertions together") Reported-by: syzbot+151e3e714d34ae4ce7e8@syzkaller.appspotmail.com Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16Merge branch 'mlx5-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== pull-request: mlx5-next 2021-02-16 The patches in this pr are already submitted and reviewed through the netdev and rdma mailing lists. The series includes mlx5 HW bits and definitions for mlx5 real time clock translation and handling in the mlx5 driver clock module to enable and support such mode [1] [1] https://patchwork.kernel.org/project/netdevbpf/patch/20210212223042.449816-7-saeed@kernel.org/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16drivers: net: xilinx_emaclite: remove arch limitationGary Guo
The changes made in eccd540 is enough for xilinx_emaclite to run without problem on 64-bit systems. I have tested it on a Xilinx FPGA with RV64 softcore. The architecture limitation in Kconfig seems no longer necessary. A small change is included to print address with %lx instead of casting to int and print with %x. Signed-off-by: Gary Guo <gary@garyguo.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16Merge branch 'bridge-mrp-Extend-br_mrp_switchdev_'David S. Miller
Horatiu Vulturv says: ==================== bridge: mrp: Extend br_mrp_switchdev_* This patch series extends MRP switchdev to allow the SW to have a better understanding if the HW can implement the MRP functionality or it needs to help the HW to run it. There are 3 cases: - when HW can't implement at all the functionality. - when HW can implement a part of the functionality but needs the SW implement the rest. For example if it can't detect when it stops receiving MRP Test frames but it can copy the MRP frames to CPU to allow the SW to determine this. Another example is generating the MRP Test frames. If HW can't do that then the SW is used as backup. - when HW can implement completely the functionality. So, initially the SW tries to offload the entire functionality in HW, if that fails it tries offload parts of the functionality in HW and use the SW as helper and if also this fails then MRP can't run on this HW. Based on these new calls, implement the switchdev for Ocelot driver. This is an example where the HW can't run completely the functionality but it can help the SW to run it, by trapping all MRP frames to CPU. Also this patch series adds MRP support to DSA and implements the Felix driver which just reuse the Ocelot functions. This part was just compiled tested because I don't have any HW on which to do the actual tests. v4: - remove ifdef MRP from include/net/switchdev.h - move MRP implementation for Ocelot in a different file such that Felix driver can use it. - extend DSA with MRP support - implement MRP support for Felix. v3: - implement the switchdev calls needed by Ocelot driver. v2: - fix typos in comments and in commit messages - remove some of the comments - move repeated code in helper function - fix issue when deleting a node when sw_backup was true ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: dsa: felix: Add support for MRPHoratiu Vultur
Implement functions 'port_mrp_add', 'port_mrp_del', 'port_mrp_add_ring_role' and 'port_mrp_del_ring_role' to call the mrp functions from ocelot. Also all MRP frames that arrive to CPU on queue number OCELOT_MRP_CPUQ will be forward by the SW. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: dsa: add MRP supportHoratiu Vultur
Add support for offloading MRP in HW. Currently implement the switchdev calls 'SWITCHDEV_OBJ_ID_MRP', 'SWITCHDEV_OBJ_ID_RING_ROLE_MRP', to allow to create MRP instances and to set the role of these instances. Add DSA_NOTIFIER_MRP_ADD/DEL and DSA_NOTIFIER_MRP_ADD/DEL_RING_ROLE which calls to .port_mrp_add/del and .port_mrp_add/del_ring_role in the DSA driver for the switch. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: mscc: ocelot: Add support for MRPHoratiu Vultur
Add basic support for MRP. The HW will just trap all MRP frames on the ring ports to CPU and allow the SW to process them. In this way it is possible to for this node to behave both as MRM and MRC. Current limitations are: - it doesn't support Interconnect roles. - it supports only a single ring. - the HW should be able to do forwarding of MRP Test frames so the SW will not need to do this. So it would be able to have the role MRC without SW support. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16bridge: mrp: Update br_mrp to use new return values of br_mrp_switchdevHoratiu Vultur
Check the return values of the br_mrp_switchdev function. In case of: - BR_MRP_NONE, return the error to userspace, - BR_MRP_SW, continue with SW implementation, - BR_MRP_HW, continue without SW implementation, Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16bridge: mrp: Extend br_mrp_switchdev to detect better the errorsHoratiu Vultur
This patch extends the br_mrp_switchdev functions to be able to have a better understanding what cause the issue and if the SW needs to be used as a backup. There are the following cases: - when the code is compiled without CONFIG_NET_SWITCHDEV. In this case return success so the SW can continue with the protocol. Depending on the function, it returns 0 or BR_MRP_SW. - when code is compiled with CONFIG_NET_SWITCHDEV and the driver doesn't implement any MRP callbacks. In this case the HW can't run MRP so it just returns -EOPNOTSUPP. So the SW will stop further to configure the node. - when code is compiled with CONFIG_NET_SWITCHDEV and the driver fully supports any MRP functionality. In this case the SW doesn't need to do anything. The functions will return 0 or BR_MRP_HW. - when code is compiled with CONFIG_NET_SWITCHDEV and the HW can't run completely the protocol but it can help the SW to run it. For example, the HW can't support completely MRM role(can't detect when it stops receiving MRP Test frames) but it can redirect these frames to CPU. In this case it is possible to have a SW fallback. The SW will try initially to call the driver with sw_backup set to false, meaning that the HW should implement completely the role. If the driver returns -EOPNOTSUPP, the SW will try again with sw_backup set to false, meaning that the SW will detect when it stops receiving the frames but it needs HW support to redirect the frames to CPU. In case the driver returns 0 then the SW will continue to configure the node accordingly. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16bridge: mrp: Add 'enum br_mrp_hw_support'Horatiu Vultur
Add the enum br_mrp_hw_support that is used by the br_mrp_switchdev functions to allow the SW to detect the cases where HW can't implement the functionality or when SW is used as a backup. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 18:11:42 +0000