summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-11-30Merge branch 'for_linus' of git://github.com/at91linux/linux-2.6-at91Linus Torvalds
* 'for_linus' of git://github.com/at91linux/linux-2.6-at91: at91/board-yl-9200: fix typo in video support atmel_spi: fix warning In function 'atmel_spi_dma_map_xfer' at91/picotux200: remove commenting usb device and dataflash support at91: rename rm9200ek and rm9200dk board file name at91rm9200ek: fix warning: 'ek_mmc_data' defined but not used at91rm9200dk: fix warning: 'dk_mmc_data' defined but not used at91: Convert remaining boards to new-style UART initialization at91: merge all at91rm9200 defconfig in one single file
2010-11-30exec: copy-and-paste the fixes into compat_do_execve() pathsOleg Nesterov
Note: this patch targets 2.6.37 and tries to be as simple as possible. That is why it adds more copy-and-paste horror into fs/compat.c and uglifies fs/exec.c, this will be cleanuped later. compat_copy_strings() plays with bprm->vma/mm directly and thus has two problems: it lacks the RLIMIT_STACK check and argv/envp memory is not visible to oom killer. Export acct_arg_size() and get_arg_page(), change compat_copy_strings() to use get_arg_page(), change compat_do_execve() to do acct_arg_size(0) as do_execve() does. Add the fatal_signal_pending/cond_resched checks into compat_count() and compat_copy_strings(), this matches the code in fs/exec.c and certainly makes sense. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-30exec: make argv/envp memory visible to oom-killerOleg Nesterov
Brad Spengler published a local memory-allocation DoS that evades the OOM-killer (though not the virtual memory RLIMIT): http://www.grsecurity.net/~spender/64bit_dos.c execve()->copy_strings() can allocate a lot of memory, but this is not visible to oom-killer, nobody can see the nascent bprm->mm and take it into account. With this patch get_arg_page() increments current's MM_ANONPAGES counter every time we allocate the new page for argv/envp. When do_execve() succeds or fails, we change this counter back. Technically this is not 100% correct, we can't know if the new page is swapped out and turn MM_ANONPAGES into MM_SWAPENTS, but I don't think this really matters and everything becomes correct once exec changes ->mm or fails. Reported-by: Brad Spengler <spender@grsecurity.net> Reviewed-and-discussed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-30NFS: Fix a readdirplus bugTrond Myklebust
When comparing filehandles in the helper nfs_same_file(), we should not be using 'strncmp()': filehandles are not null terminated strings. Instead, we should just use the existing helper nfs_compare_fh(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-30at91/board-yl-9200: fix typo in video supportJean-Christophe PLAGNIOL-VILLARD
for the epson frambuffer support it's CONFIG_FB_S1D13XXX not CONFIG_FB_S1D135XX Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-11-30atmel_spi: fix warning In function 'atmel_spi_dma_map_xfer'Jean-Christophe PLAGNIOL-VILLARD
passing argument 2 of 'dma_map_single' discards qualifiers from pointer target type Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-11-30at91/picotux200: remove commenting usb device and dataflash supportJean-Christophe PLAGNIOL-VILLARD
as based on http://www.picotux.com/pt200/picotux200.pdf these board does not have such I/O Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-11-30at91: rename rm9200ek and rm9200dk board file nameJean-Christophe PLAGNIOL-VILLARD
to be a few more concistant with the other boards as ek is for evaluation kit and dk for development kit Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Victor <linux@maxim.org.za>
2010-11-30at91rm9200ek: fix warning: 'ek_mmc_data' defined but not usedJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Victor <linux@maxim.org.za>
2010-11-30at91rm9200dk: fix warning: 'dk_mmc_data' defined but not usedJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Victor <linux@maxim.org.za>
2010-11-30at91: Convert remaining boards to new-style UART initializationJean-Christophe PLAGNIOL-VILLARD
Convert the following AT91RM9200-based boards to the new-style UART initialization: - Ajeco 1ARM Single Board Computer - Sperry-Sun KAFA board - picotux 200 Remove the deprecated at91_init_serial Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Victor <linux@maxim.org.za>
2010-11-30at91: merge all at91rm9200 defconfig in one single fileEric Benard
About all options present in each file are activated in the single file. Signed-off-by: Eric Benard <eric@eukrea.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-11-29Linux 2.6.37-rc4Linus Torvalds
2010-11-29Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Use call_rcu_sched() for pagetables
2010-11-30powerpc: Use call_rcu_sched() for pagetablesPeter Zijlstra
PowerPC relies on IRQ-disable to guard against RCU quiecent states, use the appropriate RCU call version. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-29Revert "debug_locks: set oops_in_progress if we will log messages."Dave Airlie
This reverts commit e0fdace10e75dac67d906213b780ff1b1a4cc360. On-list discussion seems to suggest that the robustness fixes for printk make this unnecessary and DaveM has also agreed in person at Kernel Summit and on list. The main problem with this code is once we hit a lockdep splat we always keep oops_in_progress set, the console layer uses oops_in_progress with KMS to decide when it should be showing the oops and not showing X, so it causes problems around suspend/resume time when a userspace resume can cause a console switch away from X, only if oops_in_progress is set (which is what we want if an oops actually is in progress, but not because we had a lockdep splat 2 days prior). Cc: David S Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: tpm: Autodetect itpm devices
2010-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) af_unix: limit recursion level pch_gbe driver: The wrong of initializer entry pch_gbe dreiver: chang author ucc_geth: fix ucc halt problem in half duplex mode inet: Fix __inet_inherit_port() to correctly increment bsockets and num_owners ehea: Add some info messages and fix an issue hso: fix disable_net NET: wan/x25_asy, move lapb_unregister to x25_asy_close_tty cxgb4vf: fix setting unicast/multicast addresses ... net, ppp: Report correct error code if unit allocation failed DECnet: don't leak uninitialized stack byte au1000_eth: fix invalid address accessing the MAC enable register dccp: fix error in updating the GAR tcp: restrict net.ipv4.tcp_adv_win_scale (#20312) netns: Don't leak others' openreq-s in proc Net: ceph: Makefile: Remove unnessary code vhost/net: fix rcu check usage econet: fix CVE-2010-3848 econet: fix CVE-2010-3850 econet: disallow NULL remote addr for sendmsg(), fixes CVE-2010-3849 ...
2010-11-29Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled OMAP: UART: don't resume UARTs that are not enabled.
2010-11-30tpm: Autodetect itpm devicesMatthew Garrett
Some Lenovos have TPMs that require a quirk to function correctly. This can be autodetected by checking whether the device has a _HID of INTC0102. This is an invalid PNPid, and as such is discarded by the pnp layer - however it's still present in the ACPI code, so we can pull it out that way. This means that the quirk won't be automatically applied on non-ACPI systems, but without ACPI we don't have any way to identify the chip anyway so I don't think that's a great concern. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Tested-by: Jiri Kosina <jkosina@suse.cz> Tested-by: Andy Isaacson <adi@hexapodia.org> Signed-off-by: James Morris <jmorris@namei.org>
2010-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (24 commits) Btrfs: don't use migrate page without CONFIG_MIGRATION Btrfs: deal with DIO bios that span more than one ordered extent Btrfs: setup blank root and fs_info for mount time Btrfs: fix fiemap Btrfs - fix race between btrfs_get_sb() and umount Btrfs: update inode ctime when using links Btrfs: make sure new inode size is ok in fallocate Btrfs: fix typo in fallocate to make it honor actual size Btrfs: avoid NULL pointer deref in try_release_extent_buffer Btrfs: make btrfs_add_nondir take parent inode as an argument Btrfs: hold i_mutex when calling btrfs_log_dentry_safe Btrfs: use dget_parent where we can UPDATED Btrfs: fix more ESTALE problems with NFS Btrfs: handle NFS lookups properly btrfs: make 1-bit signed fileds unsigned btrfs: Show device attr correctly for symlinks btrfs: Set file size correctly in file clone btrfs: Check if dest_offset is block-size aligned before cloning file Btrfs: handle the space_cache option properly btrfs: Fix early enospc because 'unused' calculated with wrong sign. ...
2010-11-29Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Fix typos in Documentation/edac.txt EDAC, MCE: Fix edac_init_mce_inject error handling EDAC: Remove deprecated kbuild goal definitions
2010-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixesLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Userland expects quota limit/warn/usage in 512b blocks
2010-11-29af_unix: limit recursion levelEric Dumazet
Its easy to eat all kernel memory and trigger NMI watchdog, using an exploit program that queues unix sockets on top of others. lkml ref : http://lkml.org/lkml/2010/11/25/8 This mechanism is used in applications, one choice we have is to have a recursion limit. Other limits might be needed as well (if we queue other types of files), since the passfd mechanism is currently limited by socket receive queue sizes only. Add a recursion_level to unix socket, allowing up to 4 levels. Each time we send an unix socket through sendfd mechanism, we copy its recursion level (plus one) to receiver. This recursion level is cleared when socket receive queue is emptied. Reported-by: Марк Коренберг <socketpair@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29pch_gbe driver: The wrong of initializer entryToshiharu Okada
The wrong of initializer entry was modified. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Reported-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29pch_gbe dreiver: chang authorToshiharu Okada
This driver's AUTHOR was changed to "Toshiharu Okada" from "Masayuki Ohtake". I update the Kconfig, renamed "Topcliff" to "EG20T". Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29Btrfs: don't use migrate page without CONFIG_MIGRATIONChris Mason
Fixes compile error Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-28ucc_geth: fix ucc halt problem in half duplex modeYang Li
In commit 58933c64(ucc_geth: Fix the wrong the Rx/Tx FIFO size), the UCC_GETH_UTFTT_INIT is set to 512 based on the recommendation of the QE Reference Manual. But that will sometimes cause tx halt while working in half duplex mode. According to errata draft QE_GENERAL-A003(High Tx Virtual FIFO threshold size can cause UCC to halt), setting UTFTT less than [(UTFS x (M - 8)/M) - 128] will prevent this from happening (M is the minimum buffer size). The patch changes UTFTT back to 256. Signed-off-by: Li Yang <leoli@freescale.com> Cc: Jean-Denis Boyer <jdboyer@media5corp.com> Cc: Andreas Schmitz <Andreas.Schmitz@riedel.net> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28inet: Fix __inet_inherit_port() to correctly increment bsockets and num_ownersNagendra Tomar
inet sockets corresponding to passive connections are added to the bind hash using ___inet_inherit_port(). These sockets are later removed from the bind hash using __inet_put_port(). These two functions are not exactly symmetrical. __inet_put_port() decrements hashinfo->bsockets and tb->num_owners, whereas ___inet_inherit_port() does not increment them. This results in both of these going to -ve values. This patch fixes this by calling inet_bind_hash() from ___inet_inherit_port(), which does the right thing. 'bsockets' and 'num_owners' were introduced by commit a9d8f9110d7e953c (inet: Allowing more than 64k connections and heavily optimize bind(0)) Signed-off-by: Nagendra Singh Tomar <tomer_iisc@yahoo.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28ehea: Add some info messages and fix an issueBreno Leitao
This patch adds some debug information about ehea not being able to allocate enough spaces. Also it correctly updates the amount of available skb. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28Btrfs: deal with DIO bios that span more than one ordered extentChris Mason
The new DIO bio splitting code has problems when the bio spans more than one ordered extent. This will happen as the generic DIO code merges our get_blocks calls together into a bigger single bio. This fixes things by walking forward in the ordered extent code finding all the overlapping ordered extents and completing them all at once. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-28Un-inline get_pipe_info() helper functionLinus Torvalds
This avoids some include-file hell, and the function isn't really important enough to be inlined anyway. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-28Export 'get_pipe_info()' to other usersLinus Torvalds
And in particular, use it in 'pipe_fcntl()'. The other pipe functions do not need to use the 'careful' version, since they are only ever called for things that are already known to be pipes. The normal read/write/ioctl functions are called through the file operations structures, so if a file isn't a pipe, they'd never get called. But pipe_fcntl() is special, and called directly from the generic fcntl code, and needs to use the same careful function that the splice code is using. Cc: Jens Axboe <jaxboe@fusionio.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-28Rename 'pipe_info()' to 'get_pipe_info()'Linus Torvalds
.. and change it to take the 'file' pointer instead of an inode, since that's what all users want anyway. The renaming is preparatory to exporting it to other users. The old 'pipe_info()' name was too generic and is already used elsewhere, so before making the function public we need to use a more specific name. Cc: Jens Axboe <jaxboe@fusionio.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-28Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix the software context switch counter perf, x86: Fixup Kconfig deps x86, perf, nmi: Disable perf if counters are not accessible perf: Fix inherit vs. context rotation bug
2010-11-28Merge branch 'fwnet' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fwnet' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: net: throttle TX queue before running out of tlabels firewire: net: replace lists by counters firewire: net: fix memory leaks firewire: net: count stats.tx_packets and stats.tx_bytes
2010-11-28hso: fix disable_netFilip Aben
The HSO driver incorrectly creates a serial device instead of a net device when disable_net is set. It shouldn't create anything for the network interface. Signed-off-by: Filip Aben <f.aben@option.com> Reported-by: Piotr Isajew <pki@ex.com.pl> Reported-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28NET: wan/x25_asy, move lapb_unregister to x25_asy_close_ttyJiri Slaby
We register lapb when tty is created, but unregister it only when the device is UP. So move the lapb_unregister to x25_asy_close_tty after the device is down. The old behaviour causes ldisc switching to fail each second attempt, because we noted for us that the device is unused, so we use it the second time, but labp layer still have it registered, so it fails obviously. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Sergey Lapin <slapin@ossfans.org> Cc: Andrew Hendry <andrew.hendry@gmail.com> Tested-by: Sergey Lapin <slapin@ossfans.org> Tested-by: Mikhail Ulyanov <ulyanov.mikhail@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28cxgb4vf: fix setting unicast/multicast addresses ...Casey Leedom
We were truncating the number of unicast and multicast MAC addresses supported. Additionally, we were incorrectly computing the MAC Address hash (a "1 << N" where we needed a "1ULL << N"). Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28net, ppp: Report correct error code if unit allocation failedCyrill Gorcunov
Allocating unit from ird might return several error codes not only -EAGAIN, so it should not be changed and returned precisely. Same time unit release procedure should be invoked only if device is unregistering. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28DECnet: don't leak uninitialized stack byteDan Rosenberg
A single uninitialized padding byte is leaked to userspace. Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> CC: stable <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28au1000_eth: fix invalid address accessing the MAC enable registerWolfgang Grandegger
"aup->enable" holds already the address pointing to the MAC enable register. The bug was introduced by commit d0e7cb: "au1000-eth: remove volatiles, switch to I/O accessors". CC: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wolfgang Grandegger <wg@denx.de> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28dccp: fix error in updating the GARGerrit Renker
This fixes a bug in updating the Greatest Acknowledgment number Received (GAR): the current implementation does not track the greatest received value - lower values in the range AWL..AWH (RFC 4340, 7.5.1) erase higher ones. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28Merge branch 'vhost-net' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-11-28tcp: restrict net.ipv4.tcp_adv_win_scale (#20312)Alexey Dobriyan
tcp_win_from_space() does the following: if (sysctl_tcp_adv_win_scale <= 0) return space >> (-sysctl_tcp_adv_win_scale); else return space - (space >> sysctl_tcp_adv_win_scale); "space" is int. As per C99 6.5.7 (3) shifting int for 32 or more bits is undefined behaviour. Indeed, if sysctl_tcp_adv_win_scale is exactly 32, space >> 32 equals space and function returns 0. Which means we busyloop in tcp_fixup_rcvbuf(). Restrict net.ipv4.tcp_adv_win_scale to [-31, 31]. Fix https://bugzilla.kernel.org/show_bug.cgi?id=20312 Steps to reproduce: echo 32 >/proc/sys/net/ipv4/tcp_adv_win_scale wget www.kernel.org [softlockup] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-27netns: Don't leak others' openreq-s in procPavel Emelyanov
The /proc/net/tcp leaks openreq sockets from other namespaces. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-27Net: ceph: Makefile: Remove unnessary codeTracey Dent
Remove the if and else conditional because the code is in mainline and there is no need in it being there. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (30 commits) ALSA: hda - Use ALC_INIT_DEFAULT for really default initialization ASoC: Fix resource reclaim for osk5912 ASoC: tlv320aic3x - fix variable may be used uninitialized warning ASoC: davinci-vcif - fix a memory leak ASoC: phycore-ac97: fix resource leak ASoC: imx-ssi: fix resource leak ASoC: simone: fix resource leak in simone_init error path ASoC: sam9g20_wm8731: fix resource leak in at91sam9g20ek_init error path ASoC: snd-soc-afeb9260: remove unneeded platform_device_del in error path ASoC: pcm030-audio-fabric: fix resource leak in pcm030_fabric_init error path ASoC: efika-audio-fabric: fix resource leak in efika_fabric_init error path ASoC: Call snd_soc_unregister_dais instead of snd_soc_unregister_dai in sh4_soc_dai_remove ASoC: fix SND_PXA2XX_LIB Kconfig warning ALSA: hda - Fix ALC660-VD/ALC861-VD capture/playback mixers ALSA: HDA: Add an extra DAC for Realtek ALC887-VD ASoC: nuc900-ac97: fix a memory leak ASoC: Return proper error for omap3pandora_soc_init ASoC: wm8961 - clear WM8961_MCLKDIV bit for freq <= 16500000 ASoC: wm8961 - clear WM8961_DACSLOPE bit for normal mode ALSA: hda - Fix Acer 7730G support ...
2010-11-27Btrfs: setup blank root and fs_info for mount timeJosef Bacik
There is a problem with how we use sget, it searches through the list of supers attached to the fs_type looking for a super with the same fs_devices as what we're trying to mount. This depends on sb->s_fs_info being filled, but we don't fill that in until we get to btrfs_fill_super, so we could hit supers on the fs_type super list that have a null s_fs_info. In order to fix that we need to go ahead and setup a blank root with a blank fs_info to hold fs_devices, that way our test will work out right and then we can set s_fs_info in btrfs_set_super, and then open_ctree will simply use our pre-allocated root and fs_info when setting everything up. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-27Btrfs: fix fiemapJosef Bacik
There are two big problems currently with FIEMAP 1) We return extents for holes. This isn't supposed to happen, we just don't return extents for holes and then userspace interprets the lack of an extent as a hole. 2) We sometimes don't set FIEMAP_EXTENT_LAST properly. This is because we wait to see a EXTENT_FLAG_VACANCY flag on the em, but this won't happen if say we ask fiemap to map up to the last extent in a file, and there is nothing but holes up to the i_size. To fix this we need to lookup the last extent in this file and save the logical offset, so if we happen to try and map that extent we can be sure to set FIEMAP_EXTENT_LAST. With this patch we now pass xfstest 225, which we never have before. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 05:58:02 +0000