summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-12-21perf session: Fallback to unordered processing if no sample_id_allIan Munsie
If we are running the new perf on an old kernel without support for sample_id_all, we should fall back to the old unordered processing of events. If we didn't than we would *always* process events without timestamps out of order, whether or not we hit a reordering race. In other words, instead of there being a chance of not attributing samples correctly, we would guarantee that samples would not be attributed. While processing all events without timestamps before events with timestamps may seem like an intuitive solution, it falls down as PERF_RECORD_EXIT events would also be processed before any samples. Even with a workaround for that case, samples before/after an exec would not be attributed correctly. This patch allows commands to indicate whether they need to fall back to unordered processing, so that commands that do not care about timestamps on every event will not be affected. If we do fallback, this will print out a warning if report -D was invoked. This patch adds the test in perf_session__new so that we only need to test once per session. Commands that do not use an event_ops (such as record and top) can simply pass NULL in it's place. Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <1291951882-sup-6069@au1.ibm.com> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-16perf, x86: Provide a PEBS capable cycle eventPeter Zijlstra
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-16perf: Sysfs enumerationPeter Zijlstra
Simple sysfs emumeration of the PMUs. Use a "event_source" bus, and add PMU devices using their name. Each PMU device has a type attribute which contrains the value needed for perf_event_attr::type to identify this PMU. This is the minimal stub needed to start using this interface, we'll consider extending the sysfs usage later. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Greg KH <gregkh@suse.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20101117222056.316982569@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-16perf: Dynamic pmu typesPeter Zijlstra
Extend the perf_pmu_register() interface to allow for named and dynamic pmu types. Because we need to support the existing static types we cannot use dynamic types for everything, hence provide a type argument. If we want to enumerate the PMUs they need a name, provide one. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20101117222056.259707703@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-16init: Initialized IDR earlierPeter Zijlstra
perf_event_init() wants to start using IDR trees, its needs in turn are satisfied by mm_init(). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20101117222056.206992649@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-16perf: Move perf_event_init() into main.cPeter Zijlstra
Currently we call perf_event_init() from sched_init(). In order to make it more obvious move it to the cannnonical location. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20101117222056.093629821@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-16perf, x86: Detect broken BIOSes that corrupt the PMUPeter Zijlstra
Some BIOSes use PMU resources, which can cause various bugs: - Non-working or erratic PMU based statistics - the PMU can end up counting the wrong thing, resulting in misleading statistics - Profiling can stop working or it can profile the wrong thing - A non-working or erratic NMI watchdog that cannot be relied on - The kernel may disturb whatever thing the BIOS tries to use the PMU for - possibly causing hardware malfunction in extreme cases. - ... and other forms of potential misbehavior Various forms of such misbehavior has been observed in practice - there are BIOSes that just corrupt the PMU state, consequences be damned. The PMU is a CPU resource that is handled by the kernel and the BIOS stealing+corrupting it is not acceptable nor robust, so we detect it, warn about it and further refuse to touch the PMU ourselves. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-16Merge branch 'perf/urgent' into perf/coreIngo Molnar
Merge reason: We want to apply a dependent patch. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-16Merge branch 'tip/perf/urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent
2010-12-16perf: Fix off by one in perf_swevent_init()Dan Carpenter
The perf_swevent_enabled[] array has PERF_COUNT_SW_MAX elements. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20101024195041.GT5985@bicker> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-13x86, watchdog: Compile fix when CONFIG_LOCAL_APIC not enabledDon Zickus
When adjusting the code to handle removing the old nmi watchdog, I forgot to consider the compile case when the local apic is not enabled. This change fixes the following build error: arch/x86/kernel/apic/hw_nmi.c:28:6: error: redefinition of ‘touch_nmi_watchdog’ Signed-off-by: Don Zickus <dzickus@redhat.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Rakib Mullick <rakib.mullick@gmail.com> LKML-Reference: <20101213153719.GD18577@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-10Merge branch 'perf/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core
2010-12-10perf, sparc: Fix CONFIG_PERF_EVENTS=y build errorIngo Molnar
Fix a typo in: 004417a6d468: perf, arch: Cleanup perf-pmu init vs lockup-detector Which caused a build failure on Sparc, reported by Stephen Rothwell. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-10x86, NMI: Add back unknown_nmi_panic and nmi_watchdog sysctlsDon Zickus
Originally adapted from Huang Ying's patch which moved the unknown_nmi_panic to the traps.c file. Because the old nmi watchdog was deleted before this change happened, the unknown_nmi_panic sysctl was lost. This re-adds it. Also, the nmi_watchdog sysctl was re-implemented and its documentation updated accordingly. Patch-inspired-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: fweisbec@gmail.com LKML-Reference: <1291068437-5331-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-10lockup detector: Compile fixes from removing the old x86 nmi watchdogDon Zickus
My patch that removed the old x86 nmi watchdog broke other arches. This change reverts a piece of that patch and puts the change in the correct spot. Signed-off-by: Don Zickus <dzickus@redhat.com> Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: fweisbec@gmail.com Cc: yinghai@kernel.org LKML-Reference: <1291068437-5331-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-09x86: Address 'unused' warning in hw_nmi.c againRakib Mullick
arch/x86/kernel/apic/hw_nmi.c:29: warning: backtrace_mask defined but not used commit 0e2af2a9(x86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOG) addressed this warning, but it was reintroduced by commit 5f2b0ba4(x86, nmi_watchdog: Remove the old nmi_watchdog). Move backtrace_mask into the #ifdef arch_trigger_all_cpu_backtrace section again. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <AANLkTi=rcc38QzoKa6LFy4m++-p_9=Zt4_kDQE=GeKxf@mail.gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09perf session: Remove unneeded dump_printf callsArnaldo Carvalho de Melo
Since we check at the beginning of the callers, no need to ask if dump_trace is set multiple times. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-09perf session: Split out user event processingThomas Gleixner
Simplify further. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124551.110956235@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-09perf session: Split out sample preprocessingThomas Gleixner
Simplify the code a bit. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124551.014649793@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-09perf session: Move dump code to event delivery pathThomas Gleixner
Preparatory patch for ordered perf report -D Acked-by: Ian Munsie <imunsie@au1.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124550.918655066@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-09perf session: Add file_offset to event delivery functionThomas Gleixner
Preparatory patch for ordered output of perf report -D Acked-by: Ian Munsie <imunsie@au1.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124550.818568607@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-09perf session: Store file offset in sample_queueThomas Gleixner
Preparatory patch for ordered output of perf report -D. Acked-by: Ian Munsie <imunsie@au1.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124550.725128545@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-09perf session: Consolidate the dump codeThomas Gleixner
The dump code used by perf report -D is scattered all over the place. Move it to separate functions. Acked-by: Ian Munsie <imunsie@au1.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124550.625434869@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-09perf session: Dont queue events w/o timestampsThomas Gleixner
If the event has no timestamp assigned then the parse code sets it to ~0ULL which causes the ordering code to enqueue it at the end. Process it right away. Reported-by: Ian Munsie <imunsie@au1.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124550.528788441@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-09perf event: Prevent unbound event__name array accessThomas Gleixner
event__name[] is missing an entry for PERF_RECORD_FINISHED_ROUND, but we happily access the array from the dump code. Make event__name[] static and provide an accessor function, fix up all callers and add the missing string. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124550.432593943@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-09perf report: Allow user to specify path to kallsyms fileDavid Ahern
This is useful for analyzing a perf data file on a different system than the one data was collected on and still include symbols from loaded kernel modules in the output. Commiter note: Updated the man page accordingly. LKML-Reference: <1291775986-16475-1-git-send-email-daahern@cisco.com> Signed-off-by: David Ahern <daahern@cisco.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-08perf: Stop all counters on rebootPeter Zijlstra
Use the reboot notifier to detach all running counters on reboot, this solves a problem with kexec where the new kernel doesn't expect running counters (rightly so). It will however decrease the coverage of the NMI watchdog. Making a kexec specific reboot notifier callback would be best, however that would require touching all notifier callback handlers as they are not properly structured to deal with new state. As a compromise, place the perf reboot notifier at the very last position in the list. Reported-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Don Zickus <dzickus@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-08perf, amd: Remove the nb lockPeter Zijlstra
Since all the hotplug stuff is serialized by the hotplug mutex, do away with the amd_nb_lock. Cc: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-08perf: Fix duplicate events with multiple-pmu vs software eventsPeter Zijlstra
Because the multi-pmu bits can share contexts between struct pmu instances we could get duplicate events by iterating the pmu list. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-08Merge branches 'x86-fixes-for-linus', 'perf-fixes-for-linus' and ↵Linus Torvalds
'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/pvclock: Zero last_value on resume * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf record: Fix eternal wait for stillborn child perf header: Don't assume there's no attr info if no sample ids is provided perf symbols: Figure out start address of kernel map from kallsyms perf symbols: Fix kallsyms kernel/module map splitting * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: nohz: Fix printk_needs_cpu() return value on offline cpus printk: Fix wake_up_klogd() vs cpu hotplug
2010-12-08Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: i915 cannot provide switcher services. drm/radeon/kms: fix vram base calculation on rs780/rs880 drm/radeon/kms: fix formatting of vram and gtt info drm/radeon/kms: forbid big bo allocation (fdo 31708) v3 drm: Don't try and disable an encoder that was never enabled drm: Add missing drm_vblank_put() along queue vblank error path drm/i915/dp: Only apply the workaround if the select is still active drm/i915: Emit a request to clear a flushed and idle ring for unbusy bo drm/i915/lvds: Always restore panel-fitter when enabling the LVDS drm/i915/ringbuffer: Only print an error on the second attempt to reset head drm/i915: announce to userspace that the bsd ring is coherent agp/intel: Fix wrong kunmap in i830_cleanup() drm/i915: Factor in pixel-repeat in FDI M/N calculation drm/i915: Death to the unnecessary 64bit divide drm/i915: Clean conflicting modesetting registers upon init drm/i915: Apply a workaround for transitioning from DP on pipe B to HDMI. drm/i915: Always set the DP transcoder config to 8BPC.
2010-12-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - add new Bamboo PT (0xdb) Input: add input driver for polled GPIO buttons Input: turbografx - fix reference counting Input: synaptics - fix handling of 2-button ClickPads Input: wacom - add IDs for two new Bamboo PTs Input: document struct input_absinfo Input: add keycodes for touchpad on/off keys Input: usbtouchscreen - add support for LG Flatron T1710B
2010-12-08drm/i915: i915 cannot provide switcher services.Dave Airlie
it has a DSM but the switcher is done via WMI. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-07Input: wacom - add new Bamboo PT (0xdb)David Foley
Adds new Bamboo Pen & Touch model - Bamboo P & T Special Edition Medium (CTH661/L; Product ID = 0xdb). Tested-by: Tobias Verbeke <tobias.verbeke@gmail.com> Signed-off-by: David Foley <favux.is@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-07Merge branch 'fixes/2637-rc5/s3c24xx' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'fixes/2637-rc5/s3c24xx' of git://git.fluff.org/bjdooks/linux: ARM: S3C24XX: Fix mess with gpio {set,get}_pull callbacks ARM: mini2440: Fix Kconfig to allow kernel to build ARM: S3C2412: Fix typo in CONFIG_CPU_S3C2412_ONLY definition ARM: S3C2443: Select properly ARM core type ARM: SMDK2416: Select MACH_SMDK, S3C_DEV_NAND, S3C_DEV_USB_HOST
2010-12-08ARM: S3C24XX: Fix mess with gpio {set,get}_pull callbacksVasily Khoruzhick
Currently the {set,get}_pull callbacks of the s3c24xx_gpiocfg_default structure are initalized via s3c_gpio_{get,set}pull_1up. This results in a linker error when only CONFIG_CPU_S3C2442 is selected: arch/arm/plat-s3c24xx/built-in.o:(.data+0x13f4): undefined reference to `s3c_gpio_getpull_1up' arch/arm/plat-s3c24xx/built-in.o:(.data+0x13f8): undefined reference to `s3c_gpio_setpull_1up' The s3c2442 has pulldowns instead of pullups compared to the s3c2440. The method of controlling them is the same though. So this patch modifies the existing s3c_gpio_{get,set}pull_1up helper functions to take an additional parameter deciding whether the pin has a pullup or pulldown. The s3c_gpio_{get,set}pull_1{down,up} functions then wrap that functions passing either S3C_GPIO_PULL_UP or S3C_GPIO_PULL_DOWN. Furthermore this patch sets up the s3c24xx_gpiocfg_default.{get,set}_pull fields in the s3c244{0,2}_map_io function to the new pulldown helper functions. Based on patch from "Lars-Peter Clausen" <lars@metafoo.de> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-12-08drm/radeon/kms: fix vram base calculation on rs780/rs880Alex Deucher
Avoid overflowing a 32 bit value. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-08drm/radeon/kms: fix formatting of vram and gtt infoAlex Deucher
print the full 64 bit values. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-08drm/radeon/kms: forbid big bo allocation (fdo 31708) v3Jerome Glisse
Forbid allocating buffer bigger than visible VRAM or GTT, also properly set lpfn field. v2 - use max macro - silence warning v3 - don't explicitly set range limit - use min macro Cc: stable <stable@kernel.org> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-08drm: Don't try and disable an encoder that was never enabledChris Wilson
Prevents code that assumes that the encoder is active when asked to be disabled from dying a horrible death. Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-08drm: Add missing drm_vblank_put() along queue vblank error pathChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kristian Høgsberg <krh@bitplanet.net> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-08Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel into drm-fixes
2010-12-07drm/i915/dp: Only apply the workaround if the select is still activeChris Wilson
As we may try to power down the link at various times, it is not necessarily still coupled with an encoder and so we must be careful not to depend upon an operation that is only valid when the link is still attached to a pipe. Fixes regression in 5bddd17. Reported-and-tested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org [after applying 5bddd17]
2010-12-07MN10300: Fix interrupt mask alteration function call name in gdbstubDavid Howells
Fix the name of interrupt mask alteration function (ie the local_change_intr_mask_level() fn) called in gdbstub to have an arch_ prefix to match the definition in asm/irqflags.h. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-07Merge branch 'irq-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Fix incorrect proc spurious output
2010-12-07Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: wmi: use memcmp instead of strncmp to compare GUIDs ACPI, hp-wmi: Fix memory leak in acpi query msi-wmi: fix semantically incorrect use of keycode instead of scancode msi-wmi: Add mute key support asus-laptop: add wimax and wwan support eeepc-wmi: fix compiler warning ibm_rtl: _RTL_ is not available in UEFI mode ibm_rtl: Loosen the DMI criteria to all IBM machines drivers/platform/x86/thinkpad_acpi.c: delete double assignment eeepc-wmi: add cpufv sysfs documentation toshiba_acpi.c: Add key_entry for a lone FN keypress ibm_rtl: fix printk format warning
2010-12-07Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] css: fix rsid evaluation for 2nd crw [S390] nohz/s390: fix arch_needs_cpu() return value on offline cpus
2010-12-07autofs4 - remove ioctl mutex (bz23142)Ian Kent
With the recent changes to remove the BKL a mutex was added to the ioctl entry point for calls to the old ioctl interface. This mutex needs to be removed because of the need for the expire ioctl to call back to the daemon to perform a umount and receive a completion status (via another ioctl). This should be fine as the new ioctl interface uses much of the same code and it has been used without a mutex for around a year without issue, as was the original intention. Ref: Bugzilla bug 23142 Signed-off-by: Ian Kent <raven@themaw.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-07perf makefile: Allow strong and weak functions in LIB_OBJSIan Munsie
When we build perf we place all of the .o files from the library files (util, arch/x/util, etc) into libperf.a which is then linked into perf. The problem is that the linker will by default only consider .o files within the .a archive if they are necessary to satisfy an unresolved symbol. As weak functions are not unresolved, it will not consider a .o file from the archive containing the strong versions of weak functions unless it requires it for another reason. This patch adds the --whole-archive flags to the linker when passing in the libperf.a file to ensure that it will consider every .o file in the archive, not just what it believes that it needs. The end result is that weak functions can now be overridden by strong variants of them in the libperf.a file. Cc: "tom.leiming" <tom.leiming@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1290991642-sup-5890@au1.ibm.com> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-07drm/i915: Emit a request to clear a flushed and idle ring for unbusy boChris Wilson
In order for bos to retire eventually, a request must be sent down the ring. This is expected, for example, by occlusion queries for which mesa will wait upon (whilst running glean) before issuing more batches and so the normal activity upon the ring is suspended and we need to emit a request to clear the idle ring. Reported-by: Jinjin, Wang <jinjin.wang@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30380 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-30 00:26:35 +0000