summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-10-27iwl3945: disable all tx fifosAbhijeet Kolekar
Disable the all the tx fifos while stopping the tx queues. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1251: re-disable PG10 chipsJohn W. Linville
"wl1251: add support for PG11 chips." accidentally enabled PG10 chips as well... Reported-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27b43: use ieee80211_rx_ni()John W. Linville
Convert to new use ieee80211_rx_ni() routine rather than open-coded version. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: remove unused lbs_cmd_802_11_inactivity_timeout()Holger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: make lbs_get_channel() staticHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: harmonize cmd.hHolger Schurig
* move declarations for functions of cmd.c/cmdresp.c into cmd.h * move declarations from cmd.h that are in main.c to decl.h * group command functions Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: cleanup host.h and hostcmd.hHolger Schurig
Also remove some unused definitions and make tab usage consistent. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: handle coexistence radio notificationZhu Yi
Handle WiFi/WiMax coexistence radio preemption notification event. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Set wiphy firmware versionSamuel Ortiz
Our wiphy firmware version is a combination of the UMAC and LMAC ones. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Support unexpected reboot barkerSamuel Ortiz
We can receive unexpected reboot barker at any time, and we're supposed to reset the whole device then. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Try shared auth when open WEP failsSamuel Ortiz
When we fail to associate with an open WEP AP, we fall back to shared auth. This allows us to support joining a shared auth WEP AP with iwconfig. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Do not handle wifi command if the interface is not readySamuel Ortiz
When resetting or bringing the interface down, we should just reject any wifi related command. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Check for cmd pointer before dereferencing itSamuel Ortiz
The wifi_if_wrapper notification handling code uses a cmd pointer without checking if it's valid or not. We're dereferencing it because we assume that we only get to that point if there was a pending command for us. That's not always true, so we'd better check. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: SDIO disable race fixSamuel Ortiz
When calling sdio->bus_disable(), we are flushing the command lists before disabling the sdio function. We can thus potentially get a command response after having flushed the command list. To avoid that race, we have to call iwm_reset() after disabling the sdio function. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Tx power settingSamuel Ortiz
We can now set the Tx power from e.g. iwconfig. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Update fixed size config definitionsSamuel Ortiz
We need to be in sync with the latest firmware API. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Update statistics notification structureSamuel Ortiz
The latest firmware adds a ht_rates and a chain_energy field. The latter is needed as we want to eventually support RSSI/antenna handling. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Improve rx debugSamuel Ortiz
We display the correct DROP/RELEASE string for each rx packets, and when it's dropped we also display the reason. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: Profile flags can be WPA1 or WPA2 not bothSamuel Ortiz
UMAC will ASSERT if the profile security flag is WPA1 | WPA2, so we can only accept one of those. Moreover wpa_s wext and nl80211 drivers dont try to send WPA1 | WPA2, but only one at a time. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: CT kill supportSamuel Ortiz
We set the initial CT (Temperature control) value to 110 degrees. If the chip goes over that threshold, we hard block the device which will turn it down. At the same time we schedule a 30 seconds delayed work that unblock the device (and userspace is supposed to bring it back up), hoping that the chip will have cooled down by then... Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: WPS supportSamuel Ortiz
By setting the WSC profile flag, we now support WPS as an enrollee. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: allow joining an existed IBSS networkZhu Yi
We used to only support creating a new IBSS network. Now joining to an existed IBSS network is supported as well. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27iwmc3200wifi: add BGN sdio device idZhu Yi
Add BGN SKU sdio device id. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27mac80211: Learn about mesh portals from multicast trafficJavier Cardona
Mesh portals proxy traffic for nodes external to the mesh. When a proxied frame is received by a mesh interface, it should update its mesh portal table. This was only happening for unicast frames. With this change we also learn about mesh portals from proxied multicast frames. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27rt2x00: Implement support for rt2800pciIvo van Doorn
Add support for the rt2860/rt3090 chipsets from Ralink. Includes various patches from a lot of people who helped getting this driver into the current shape. Signed-off-by: Alban Browaeys <prahal@yahoo.com> Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Luis Correia <luis.f.correia@gmail.com> Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Mark Asselstine <asselsm@gmail.com> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27rt2x00: Add rt2x00soc bus moduleIvo van Doorn
Add new library module for SoC drivers. This is needed to fully support the platform driver part of rt2800pci. Based on original patch from Felix. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1251: use ieee80211_rx_ni()Kalle Valo
Because of SPI and SDIO wl1251 does everything in a workqueue, including calling ieee80211_rx() which should be called with bottom halves disabled. An error message is emitted because of this: NOHZ: local_softirq_pending 08 Fix this by using ieee80211_rx_ni(). Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27mac80211: add ieee80211_rx_ni()Kalle Valo
ieee80211_rx() must be called with bottom halves disabled. To simplify driver development implement ieee80211_rx_ni() which disables BH. This function must be used when in process context. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27b43: Optimize PIO scratchbuffer usageMichael Buesch
This optimizes the PIO scratchbuffer usage. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1251: add support for PG11 chips.David-John Willis
This simple patch adds support for the PG11 variant of the WL1251 chip as used on the OpenPandora OMAP3 device. Signed-off-by: David-John Willis <John.Willis@Distant-earth.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: added missing packed modifier in some cmd structsLuciano Coelho
Some of the struct definitions in the wl1271_acx.h file were missing the __attribute__ ((packed)) modifier. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: fix endianess issuesLuciano Coelho
We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: added missing packed modifier in some acx structsLuciano Coelho
Some of the struct definitions in the wl1271_acx.h file were missing the __attribute__ ((packed)) modifier. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: fix sparse warnings about undeclared functionsLuciano Coelho
The following sparse warnings were fixed: drivers/net/wireless/wl12xx/wl1271_spi.c:199:6: warning: symbol 'wl1271_spi_read_busy' was not declared. Should it be static? drivers/net/wireless/wl12xx/wl1271_cmd.c:84:5: warning: symbol 'wl1271_cmd_cal_channel_tune' was not declared. Should it be static? drivers/net/wireless/wl12xx/wl1271_cmd.c:107:5: warning: symbol 'wl1271_cmd_cal_update_ref_point' was not declared. Should it be static? drivers/net/wireless/wl12xx/wl1271_cmd.c:132:5: warning: symbol 'wl1271_cmd_cal_p2g' was not declared. Should it be static? drivers/net/wireless/wl12xx/wl1271_cmd.c:153:5: warning: symbol 'wl1271_cmd_cal' was not declared. Should it be static? Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Set IEEE80211_FCTL_TODS in the null data templateJuuso Oikarinen
Set the IEEE80211_FCTL_TODS bit in the FC of the null data template. This is a mandatory requirement in specification. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Cc: Vidhya Govindan <vidhya.govindan@nokia.com> Cc: Janne Ylälehto <janne.ylalehto@nokia.com> Reviewed-by: Janne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27mac80211: replace netif_tx_{start,stop,wake}_all_queuesJohn W. Linville
Replace netif_tx_{start,stop,wake}_all_queues with the single-queue equivalents (i.e. netif_{start,stop,wake}_queue). Since we are down to a single queue, these should peform slightly better. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27ath5k: use noise calibration from madwifi halBob Copeland
This updates ath5k to calibrate the noise floor similar to the way it is done in the madwifi hal and ath9k. Of note: - we start NF measurement at the same time as AGC calibration, but do not actually read the value until the periodic (long) calibration - we keep a history of the last few values read and write the median back to the hardware for CCA - we do not complain if NF calibration isn't complete, instead we keep the last read value. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27ath9k: adjust ahb callbacks to new struct layout to avoid compile errorsMarek Lindner
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas: make __lbs_cmd_async() non-staticHolger Schurig
This function will be needed for the cfg80211-enabled libertas driver. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1251: rename spi device to wl1251Kalle Valo
During rename of the driver from wl12xx to wl1251 the spi device name was accidentally left as wl12xx. Rename it to wl1251 which is the proper name of the driver. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27cfg80211: remove warning in deauth caseHolger Schurig
It might be the case that __cfg80211_disconnected() has already cleaned up wdev->current_bss() for us. The old code didn't catch that situation and didn't warn needlessly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27cfg80211: no cookies in cfg80211_send_XXX()Holger Schurig
Get rid of cookies in cfg80211_send_XXX() functions. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Fix filter configurationJuuso Oikarinen
Fix the filter configuration to properly work with the two phase filter configuration (prepare_multicast/configure_filter.) Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: make sure PS is disabled in PLTLuciano Coelho
We cannot be in PS mode when running PLT tests, so we need to make sure we're in active mode. Also, we need to clear up the rx_counter when we stop PLT, otherwise it could cause problems when entering PLT again. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Correct memory handling for FW bootJuuso Oikarinen
Several memory allocation related failure cases were not properly handled by the driver - the result was that in low memory conditions booting of a corrupted FW could be attempted - and user space would not get proper failure code. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Remove unnecessary rx_descriptor memory allocationJuuso Oikarinen
Remove unnecessary RX descriptor memory allocation from the driver. The allocation was a remnant of the wl1251 driver. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Support for IPv4 ARP filteringJuuso Oikarinen
Add support for IPv4 ARP filtering in the driver. This will dramatically reduce the number of unnecessary interrupts by the device in conqested networks. This patch is based on a similar patch to wl1251 by Janne Ylälehto. Cc: Janne Ylälehto <janne.ylalehto@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Fix event handling mechanismJuuso Oikarinen
The event handling mechanism could miss events if multiple events would occur simultaneously. Fix event handling mechanism to process all events. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Fix multicast list handlingJuuso Oikarinen
Fixes bugs in the multicast list handling: - Use atomic memory allocation in non-sleepable context - Increment address pointer when iterating list of MC addresses Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27wl1271: Checking of rx descriptor status fixedTeemu Paasikivi
Fixed checking of status of the received packet. On wl1251 status is in the flags field of the descriptor, on wl1271 there is a separate status field. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>