| Age | Commit message (Collapse) | Author |
|---|
|
To improve readability, use PPC_RAW_xx() macros instead of
open coding. Those macros are self-explanatory so the comments
can go as well.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4ca2bfdca2f47a293d05f61eb3c4e487ee170f1f.1621506159.git.christophe.leroy@csgroup.eu
|
|
Instead of open coding with PPC_INST_ defines, use
PPC_RAW_() macros. It improves readability.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8c92f1d9e825ee47c6f88fe43ad42d2a8cc2ab4a.1621506159.git.christophe.leroy@csgroup.eu
|
|
Today we have __REG_Rx macros . They are mainly meant for
internal use by macros __PPC_RA() and friends macros which
allows uses like __PPC_RA(R12).
When used with PPC_RAW_xx() macros, it gives a result which is
not very readable.
Add shorter macros _Rx in order to improve readability when
used with PPC_RAW_xx() macros.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ec34d92b7c2f810622261acfeeed4b0a0f4d01bd.1621506159.git.christophe.leroy@csgroup.eu
|
|
At the time being, we have PPC_RAW_PLXVP() and PPC_RAW_PSTXVP() which
provide a 64 bits value, and then it gets split by open coding to
format it into a 'struct ppc_inst' instruction.
Instead, define a PPC_RAW_xxx_P() and a PPC_RAW_xxx_S() to be used
as is.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5d146b31b943e7ad674894421db4feef54804b9b.1621506159.git.christophe.leroy@csgroup.eu
|
|
_switch() saves and restores ALTIVEC and SPE status.
For altivec this is redundant with what __switch_to() does with
save_sprs() and restore_sprs() and giveup_all() before
calling _switch().
Add support for SPI in save_sprs() and restore_sprs() and
remove things from _switch().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8ab21fd93d6e0047aa71e6509e5e312f14b2991b.1620998075.git.christophe.leroy@csgroup.eu
|
|
Commit 328e7e487a46 ("powerpc: force inlining of csum_partial() to
avoid multiple csum_partial() with GCC10") inlined csum_partial().
Now that csum_partial() is inlined, GCC outlines csum_add() when
called by csum_partial().
c064fb28 <csum_add>:
c064fb28: 7c 63 20 14 addc r3,r3,r4
c064fb2c: 7c 63 01 94 addze r3,r3
c064fb30: 4e 80 00 20 blr
c0665fb8 <csum_add>:
c0665fb8: 7c 63 20 14 addc r3,r3,r4
c0665fbc: 7c 63 01 94 addze r3,r3
c0665fc0: 4e 80 00 20 blr
c066719c: 7c 9a c0 2e lwzx r4,r26,r24
c06671a0: 38 60 00 00 li r3,0
c06671a4: 7f 1a c2 14 add r24,r26,r24
c06671a8: 4b ff ee 11 bl c0665fb8 <csum_add>
c06671ac: 80 98 00 04 lwz r4,4(r24)
c06671b0: 4b ff ee 09 bl c0665fb8 <csum_add>
c06671b4: 80 98 00 08 lwz r4,8(r24)
c06671b8: 4b ff ee 01 bl c0665fb8 <csum_add>
c06671bc: a0 98 00 0c lhz r4,12(r24)
c06671c0: 4b ff ed f9 bl c0665fb8 <csum_add>
c06671c4: 7c 63 18 f8 not r3,r3
c06671c8: 81 3f 00 68 lwz r9,104(r31)
c06671cc: 81 5f 00 a0 lwz r10,160(r31)
c06671d0: 7d 29 18 14 addc r9,r9,r3
c06671d4: 7d 29 01 94 addze r9,r9
c06671d8: 91 3f 00 68 stw r9,104(r31)
c06671dc: 7d 1a 50 50 subf r8,r26,r10
c06671e0: 83 01 00 10 lwz r24,16(r1)
c06671e4: 83 41 00 18 lwz r26,24(r1)
The sum with 0 is useless, should have been skipped.
And there is even one completely unused instance of csum_add().
In file included from ./include/net/checksum.h:22,
from ./include/linux/skbuff.h:28,
from ./include/linux/icmp.h:16,
from net/ipv6/ip6_tunnel.c:23:
./arch/powerpc/include/asm/checksum.h: In function '__ip6_tnl_rcv':
./arch/powerpc/include/asm/checksum.h:94:22: warning: inlining failed in call to 'csum_add': call is unlikely and code size would grow [-Winline]
94 | static inline __wsum csum_add(__wsum csum, __wsum addend)
| ^~~~~~~~
./arch/powerpc/include/asm/checksum.h:172:31: note: called from here
172 | sum = csum_add(sum, (__force __wsum)*(const u32 *)buff);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./arch/powerpc/include/asm/checksum.h:94:22: warning: inlining failed in call to 'csum_add': call is unlikely and code size would grow [-Winline]
94 | static inline __wsum csum_add(__wsum csum, __wsum addend)
| ^~~~~~~~
./arch/powerpc/include/asm/checksum.h:177:31: note: called from here
177 | sum = csum_add(sum, (__force __wsum)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
178 | *(const u32 *)(buff + 4));
| ~~~~~~~~~~~~~~~~~~~~~~~~~
./arch/powerpc/include/asm/checksum.h:94:22: warning: inlining failed in call to 'csum_add': call is unlikely and code size would grow [-Winline]
94 | static inline __wsum csum_add(__wsum csum, __wsum addend)
| ^~~~~~~~
./arch/powerpc/include/asm/checksum.h:183:31: note: called from here
183 | sum = csum_add(sum, (__force __wsum)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
184 | *(const u32 *)(buff + 8));
| ~~~~~~~~~~~~~~~~~~~~~~~~~
./arch/powerpc/include/asm/checksum.h:94:22: warning: inlining failed in call to 'csum_add': call is unlikely and code size would grow [-Winline]
94 | static inline __wsum csum_add(__wsum csum, __wsum addend)
| ^~~~~~~~
./arch/powerpc/include/asm/checksum.h:186:31: note: called from here
186 | sum = csum_add(sum, (__force __wsum)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
187 | *(const u16 *)(buff + 12));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
Force inlining of csum_add().
94c: 80 df 00 a0 lwz r6,160(r31)
950: 7d 28 50 2e lwzx r9,r8,r10
954: 7d 48 52 14 add r10,r8,r10
958: 80 aa 00 04 lwz r5,4(r10)
95c: 80 ff 00 68 lwz r7,104(r31)
960: 7d 29 28 14 addc r9,r9,r5
964: 7d 29 01 94 addze r9,r9
968: 7d 08 30 50 subf r8,r8,r6
96c: 80 aa 00 08 lwz r5,8(r10)
970: a1 4a 00 0c lhz r10,12(r10)
974: 7d 29 28 14 addc r9,r9,r5
978: 7d 29 01 94 addze r9,r9
97c: 7d 29 50 14 addc r9,r9,r10
980: 7d 29 01 94 addze r9,r9
984: 7d 29 48 f8 not r9,r9
988: 7c e7 48 14 addc r7,r7,r9
98c: 7c e7 01 94 addze r7,r7
990: 90 ff 00 68 stw r7,104(r31)
In the non-inlined version, the first sum with 0 was performed.
Here it is skipped.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f7f4d4e364de6e473da874468b903da6e5d97adc.1620713272.git.christophe.leroy@csgroup.eu
|
|
Merge our fixes branch which has a number of important fixes, notably
the fix for initrd corruption, as well as the fixes for scv vs ptrace.
|
|
This avoids an (optional) compiler warning:
arch/powerpc/kernel/tau_6xx.c: In function 'TAU_init':
arch/powerpc/kernel/tau_6xx.c:204:30: error: too many arguments for format [-Werror=format-extra-args]
tau_workq = alloc_workqueue("tau", WQ_UNBOUND, 1, 0);
Fixes: b1c6a0a10bfa ("powerpc/tau: Convert from timer to workqueue")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a1456e8bbd33ef702e3ff6f14b1bf3919241c62b.1623398307.git.fthain@linux-m68k.org
|
|
Commit b0b3b2c78ec0 ("powerpc: Switch to relative jump labels") switched
us to using relative jump labels. That involves changing the code,
target and key members in struct jump_entry to be relative to the
address of the jump_entry, rather than absolute addresses.
We have two static inlines that create a struct jump_entry,
arch_static_branch() and arch_static_branch_jump(), as well as an asm
macro ARCH_STATIC_BRANCH, which is used by the pseries-only hypervisor
tracing code.
Unfortunately we missed updating the key to be a relative reference in
ARCH_STATIC_BRANCH.
That causes a pseries kernel to have a handful of jump_entry structs
with bad key values. Instead of being a relative reference they instead
hold the full address of the key.
However the code doesn't expect that, it still adds the key value to the
address of the jump_entry (see jump_entry_key()) expecting to get a
pointer to a key somewhere in kernel data.
The table of jump_entry structs sits in rodata, which comes after the
kernel text. In a typical build this will be somewhere around 15MB. The
address of the key will be somewhere in data, typically around 20MB.
Adding the two values together gets us a pointer somewhere around 45MB.
We then call static_key_set_entries() with that bad pointer and modify
some members of the struct static_key we think we are pointing at.
A pseries kernel is typically ~30MB in size, so writing to ~45MB won't
corrupt the kernel itself. However if we're booting with an initrd,
depending on the size and exact location of the initrd, we can corrupt
the initrd. Depending on how exactly we corrupt the initrd it can either
cause the system to not boot, or just corrupt one of the files in the
initrd.
The fix is simply to make the key value relative to the jump_entry
struct in the ARCH_STATIC_BRANCH macro.
Fixes: b0b3b2c78ec0 ("powerpc: Switch to relative jump labels")
Reported-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Reported-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reported-by: Greg Kurz <groug@kaod.org>
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Daniel Axtens <dja@axtens.net>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210614131440.312360-1-mpe@ellerman.id.au
|
|
arch/powerpc/Kbuild decend into arch/powerpc/perf/ only when
CONFIG_PERF_EVENTS is selected, so there is not need to take
CONFIG_PERF_EVENTS into account in arch/powerpc/perf/Makefile.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d37f61afca55b5b33787b643890e061ae1c18f5f.1620396045.git.christophe.leroy@csgroup.eu
|
|
If by some reason any of the headers will include ctype.h
we will have a name collision. Avoid this by moving isspace()
to the dedicate namespace.
First appearance of the code is in the commit cf68787b68a2
("powerpc/prom_init: Evaluate mem kernel parameter for early allocation").
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[mpe: Reformat prom_isxdigit() now that we allow longer lines]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210510144925.58195-1-andriy.shevchenko@linux.intel.com
|
|
Function 'event_ebb_init' and 'event_leader_ebb_init' are declared
twice in the header file, so remove the repeated declaration.
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1622529385-5938-1-git-send-email-zhangshaokun@hisilicon.com
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
arch/powerpc/platforms/cell/spider-pci.c: In function 'spiderpci_io_flush':
arch/powerpc/platforms/cell/spider-pci.c:28:6: warning:
variable ‘val’ set but not used [-Wunused-but-set-variable]
It never used since introduction.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210601085319.140461-1-libaokun1@huawei.com
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
arch/powerpc/platforms/cell/spufs/switch.c: In function 'check_ppu_mb_stat':
arch/powerpc/platforms/cell/spufs/switch.c:1660:6: warning:
variable ‘dummy’ set but not used [-Wunused-but-set-variable]
arch/powerpc/platforms/cell/spufs/switch.c: In function 'check_ppuint_mb_stat':
arch/powerpc/platforms/cell/spufs/switch.c:1675:6: warning:
variable ‘dummy’ set but not used [-Wunused-but-set-variable]
It never used since introduction.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210601085127.139598-1-libaokun1@huawei.com
|
|
With gcc 10.3, there is this compiler error:
compiler.h:56:26: error: this statement may fall through
mpc52xx_gpt.c:586:2: note: here
586 | case WDIOC_GETTIMEOUT:
| ^~~~
So add the fallthrough pseudo keyword.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210601190200.2637776-1-trix@redhat.com
|
|
In commit 96d7a4e06fab ("powerpc/signal64: Rewrite handle_rt_signal64()
to minimise uaccess switches") the 64-bit signal code was rearranged to
use user_write_access_begin/end().
As part of that change the call to copy_siginfo_to_user() was moved
later in the function, so that it could be done after the
user_write_access_end().
In particular it was moved after we modify regs->nip to point to the
signal trampoline. That means if copy_siginfo_to_user() fails we exit
handle_rt_signal64() with an error but with regs->nip modified, whereas
previously we would not modify regs->nip until the copy succeeded.
Returning an error from signal delivery but with regs->nip updated
leaves the process in a sort of half-delivered state. We do immediately
force a SEGV in signal_setup_done(), called from do_signal(), so the
process should never run in the half-delivered state.
However that SEGV is not delivered until we've gone around to
do_notify_resume() again, so it's possible some tracing could observe
the half-delivered state.
There are other cases where we fail signal delivery with regs partly
updated, eg. the write to newsp and SA_SIGINFO, but the latter at least
is very unlikely to fail as it reads back from the frame we just wrote
to.
Looking at other arches they seem to be more careful about leaving regs
unchanged until the copy operations have succeeded, and in general that
seems like good hygenie.
So although the current behaviour is not cleary buggy, it's also not
clearly correct. So move the call to copy_siginfo_to_user() up prior to
the modification of regs->nip, which is closer to the old behaviour, and
easier to reason about.
Fixes: 96d7a4e06fab ("powerpc/signal64: Rewrite handle_rt_signal64() to minimise uaccess switches")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210608134605.2783677-1-mpe@ellerman.id.au
|
|
Commit f959dcd6ddfd29235030e8026471ac1b022ad2b0 (dma-direct: Fix
potential NULL pointer dereference) added a null check on the
dma_mask pointer of the kernel's device structure.
Add a dma_mask variable to the ps3_dma_region structure and set
the device structure's dma_mask pointer to point to this new variable.
Fixes runtime errors like these:
# WARNING: Fixes tag on line 10 doesn't match correct format
# WARNING: Fixes tag on line 10 doesn't match correct format
ps3_system_bus_match:349: dev=8.0(sb_01), drv=8.0(ps3flash): match
WARNING: CPU: 0 PID: 1 at kernel/dma/mapping.c:151 .dma_map_page_attrs+0x34/0x1e0
ps3flash sb_01: ps3stor_setup:193: map DMA region failed
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/562d0c9ea0100a30c3b186bcc7adb34b0bbd2cd7.1622746428.git.geoff@infradead.org
|
|
To aid debugging PS3 boot problems change the log level
of several PS3 device errors from pr_debug to pr_warn.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eb5c1c10da0bbdeb27c8b069187b4f58e429e837.1622746428.git.geoff@infradead.org
|
|
To aid debugging, add a new PS3 kernel config option
PS3_VERBOSE_RESULT that, when enabled, will print more
verbose messages for the result of LV1 hypercalls.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0ce4b6969a08094a747bd382dbfd30b72ebc192d.1622746428.git.geoff@infradead.org
|
|
Change the PS3 linker script to align the DTB at 8 bytes,
the same alignment as that of the of the 'generic' powerpc
linker script.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/245897ed65e402686a4b114ba618e935cb5c6506.1622822173.git.geoff@infradead.org
|
|
Add a new sysfs entry /sys/firmware/ps3/fw-version that exports
the PS3's firmware version.
The firmware version is available through an LV1 hypercall, and we've
been printing it to the boot log, but haven't provided an easy way for
user utilities to get it.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/41509b2da647cd34b1331cc4756c8774b1e284eb.1622822173.git.geoff@infradead.org
|
|
A change in clang 13 results in the __lwsync macro being defined as
__builtin_ppc_lwsync, which emits 'lwsync' or 'msync' depending on what
the target supports. This breaks the build because of -Werror in
arch/powerpc, along with thousands of warnings:
In file included from arch/powerpc/kernel/pmc.c:12:
In file included from include/linux/bug.h:5:
In file included from arch/powerpc/include/asm/bug.h:109:
In file included from include/asm-generic/bug.h:20:
In file included from include/linux/kernel.h:12:
In file included from include/linux/bitops.h:32:
In file included from arch/powerpc/include/asm/bitops.h:62:
arch/powerpc/include/asm/barrier.h:49:9: error: '__lwsync' macro redefined [-Werror,-Wmacro-redefined]
#define __lwsync() __asm__ __volatile__ (stringify_in_c(LWSYNC) : : :"memory")
^
<built-in>:308:9: note: previous definition is here
#define __lwsync __builtin_ppc_lwsync
^
1 error generated.
Undefine this macro so that the runtime patching introduced by
commit 2d1b2027626d ("powerpc: Fixup lwsync at runtime") continues to
work properly with clang and the build no longer breaks.
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1386
Link: https://github.com/llvm/llvm-project/commit/62b5df7fe2b3fda1772befeda15598fbef96a614
Link: https://lore.kernel.org/r/20210528182752.1852002-1-nathan@kernel.org
|
|
Commit b26e8f27253a ("powerpc/mem: Move cache flushing functions into
mm/cacheflush.c") removed asm/sparsemem.h which is required when
CONFIG_MEMORY_HOTPLUG is selected to get the declaration of
create_section_mapping().
Add it back.
Fixes: b26e8f27253a ("powerpc/mem: Move cache flushing functions into mm/cacheflush.c")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3e5b63bb3daab54a1eb9c20221c2e9528c4db9b3.1622883330.git.christophe.leroy@csgroup.eu
|
|
This reverts commit 3c0468d4451eb6b4f6604370639f163f9637a479.
That commit was breaking alignment guarantees for the DMA address when
allocating coherent mappings, as described in
Documentation/core-api/dma-api-howto.rst
It was also noticed by Mellanox' driver:
[ 1515.763621] mlx5_core c002:01:00.0: mlx5_frag_buf_alloc_node:146:(pid 13402): unexpected map alignment: 0x0800000000c61000, page_shift=16
[ 1515.763635] mlx5_core c002:01:00.0: mlx5_cqwq_create:181:(pid
13402): mlx5_frag_buf_alloc_node() failed, -12
Fixes: 3c0468d4451e ("powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210526144540.117795-1-fbarrat@linux.ibm.com
|
|
Similar to commit 25edcc50d76c ("KVM: PPC: Book3S HV: Save and restore
FSCR in the P9 path"), ensure the P7/8 path saves and restores the host
FSCR. The logic explained in that patch actually applies there to the
old path well: a context switch can be made before kvmppc_vcpu_run_hv
restores the host FSCR and returns.
Now both the p9 and the p7/8 paths now save and restore their FSCR, it
no longer needs to be restored at the end of kvmppc_vcpu_run_hv
Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs")
Cc: stable@vger.kernel.org # v3.14+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210526125851.3436735-1-npiggin@gmail.com
|
|
real_vmalloc_addr() does not currently work for huge vmalloc, which is
what the reverse map can be allocated with for radix host, hash guest.
Extract the hugepage aware equivalent from eeh code into a helper, and
convert existing sites including this one to use it.
Fixes: 8abddd968a30 ("powerpc/64s/radix: Enable huge vmalloc mappings")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210526120005.3432222-1-npiggin@gmail.com
|
|
When checking if the probed instruction is the suffix of a prefixed
instruction, we access the instruction at the previous word. If the
probed instruction is the very first word of a module, we can end up
trying to access an invalid page.
Fix this by skipping the check for all instructions at the beginning of
a page. Prefixed instructions cannot cross a 64-byte boundary and as
such, we don't expect to encounter a suffix as the very first word in a
page for kernel text. Even if there are prefixed instructions crossing
a page boundary (from a module, for instance), the instruction will be
illegal, so preventing probing on the suffix of such prefix instructions
isn't worthwhile.
Fixes: b4657f7650ba ("powerpc/kprobes: Don't allow breakpoints on suffixes")
Cc: stable@vger.kernel.org # v5.8+
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0df9a032a05576a2fa8e97d1b769af2ff0eafbd6.1621416666.git.naveen.n.rao@linux.vnet.ibm.com
|
|
hvterm_raw_put_chars() calls hvc_put_chars(), which may return -EAGAIN
when the underlying hcall returns a "busy" status, but udbg_hvc_putc()
doesn't handle this. When using xmon on a PowerVM guest, this can
result in incomplete or garbled output when printing relatively large
amounts of data quickly, such as when dumping the kernel log buffer.
Call again on -EAGAIN.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210514214422.3019105-1-nathanl@linux.ibm.com
|
|
Log buffer entries that are too long for dump_log_buf()'s small
local buffer are:
* silently discarded when a single-line entry is too long;
kmsg_dump_get_line() returns true but sets &len to 0.
* silently truncated to the last fitting new line when a multi-line
entry is too long, e.g. register dumps from __show_regs(); this
seems undetectable via the kmsg_dump API.
xmon_printf()'s internal buffer is already 1KB; enlarge
dump_log_buf()'s own buffer to match and make it statically
allocated. Verified that this allows complete printing of register
dumps on ppc64le with both CONFIG_PRINTK_TIME=y and
CONFIG_PRINTK_CALLER=y.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210514162420.2911458-1-nathanl@linux.ibm.com
|
|
Commit 51c9c0843993 ("powerpc/kprobes: Implement Optprobes")
implemented a powerpc specific version of optinsn in order
to workaround the 32Mb limitation for direct branches.
Instead of implementing a dedicated powerpc version, use the
common optinsn and override the allocation and freeing functions.
This also indirectly remove the CLANG warning about
is_kprobe_ppc_optinsn_slot() not being use, and the powerpc will
now benefit from commit 5b485629ba0d ("kprobes, extable: Identify
kprobes trampolines as kernel text area")
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ec5e85f9f9abcfecc959a03495f4a7858eb4d203.1620896780.git.christophe.leroy@csgroup.eu
|
|
Some architectures like powerpc require a non standard
allocation of optinsn page, because module pages are
too far from the kernel for direct branches.
Define weak alloc_optinsn_page() and free_optinsn_page(), that
fall back on alloc_insn_page() and free_insn_page() when not
overridden by the architecture.
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/40a43d6df1fdf41ade36e9a46e60a4df774ca9f6.1620896780.git.christophe.leroy@csgroup.eu
|
|
Until clang-12, clang would attempt to assemble 32b powerpc assembler in
64b emulation mode when using a 64b target triple with -m32, leading to
errors during the build of the compat VDSO. Simply disable all of
CONFIG_COMPAT; users should upgrade to the latest release of clang for
proper support.
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1160
Link: https://github.com/llvm/llvm-project/commits/2288319733cd5f525bf7e24dece08bfcf9d0ff9e
Link: https://groups.google.com/g/clang-built-linux/c/ayNmi3HoNdY/m/XJAGj_G2AgAJ
Link: https://lore.kernel.org/r/20210518205858.2440344-1-ndesaulniers@google.com
|
|
While looking at -Wundef warnings, the #if CONFIG_EEH stood out as a
possible candidate to convert to #ifdef CONFIG_EEH.
It seems that based on Kconfig dependencies it's not possible to build
this file without CONFIG_EEH enabled, but based on upstream discussion,
it's not clear yet that CONFIG_EEH should be enabled by default.
For now, simply fix the -Wundef warning.
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/570
Link: https://lore.kernel.org/lkml/67f6cd269684c9aa8463ff4812c3b4605e6739c3.camel@perches.com/
Link: https://lore.kernel.org/lkml/CAOSf1CGoN5R0LUrU=Y=UWho1Z_9SLgCX8s3SbFJXwJXc5BYz4A@mail.gmail.com/
Link: https://lore.kernel.org/r/20210518204044.2390064-1-ndesaulniers@google.com
|
|
This adds selftests for setb instruction.
Signed-off-by: Sathvika Vasireddy <sathvika@linux.vnet.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b05b61ccb5f10279d46fed490796f32ea2ccc270.1620727160.git.sathvika@linux.vnet.ibm.com
|
|
This adds emulation support for the following instruction:
* Set Boolean (setb)
Signed-off-by: Sathvika Vasireddy <sathvika@linux.vnet.ibm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7b735b0c898da0db2af8628a64df2f5114596f22.1620727160.git.sathvika@linux.vnet.ibm.com
|
|
Make it easier to generate a 32 or 64-bit specific randconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Requested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210428132700.3426100-1-mpe@ellerman.id.au
|
|
We don't need the 'lmbs_available' variable to count the valid LMBs and
to check if we have less than 'lmbs_to_remove'. We must ensure that the
entire LMB range must be removed, so we can error out immediately if any
LMB in the range is marked as reserved.
Add a couple of comments explaining the reasoning behind the differences
we have in this function in contrast to what it is done in its sister
function, dlpar_memory_remove_by_count().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210512202809.95363-5-danielhb413@gmail.com
|
|
After marking the LMBs as reserved depending on dlpar_remove_lmb() rc,
we evaluate whether we need to add the LMBs back or if we can release
the LMB DRCs. In both cases, a for_each_drmem_lmb() loop without a break
condition is used. This means that we're going to cycle through all LMBs
of the partition even after we're done with what we were going to do.
This patch adds break conditions in both loops to avoid this. The
'lmbs_removed' variable was renamed to 'lmbs_reserved', and it's now
being decremented each time a lmb reservation is removed, indicating
that the operation we're doing (adding back LMBs or releasing DRCs) is
completed.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210512202809.95363-4-danielhb413@gmail.com
|
|
DRCONF_MEM_RESERVED is a flag that represents the "Reserved Memory"
status in LOPAR v2.10, section 4.2.8. If a LMB is marked as reserved,
quoting LOPAR, "is not to be used or altered by the base OS". This flag
is read only in the kernel, being set by the firmware/hypervisor in the
DT. As an example, QEMU will set this flag in hw/ppc/spapr.c,
spapr_dt_dynamic_memory().
lmb_is_removable() does not check for DRCONF_MEM_RESERVED. This function
is used in dlpar_remove_lmb() as a guard before the removal logic. Since
it is failing to check for !RESERVED, dlpar_remove_lmb() will fail in a
later stage instead of failing in the validation when receiving a
reserved LMB as input.
lmb_is_removable() is also used in dlpar_memory_remove_by_count() to
evaluate if we have enough LMBs to complete the request. The missing
!RESERVED check in this case is causing dlpar_memory_remove_by_count()
to miscalculate the number of elegible LMBs for the removal, and can
make it error out later on instead of failing in the validation with the
'not enough LMBs to satisfy request' message.
Making a DRCONF_MEM_RESERVED check in lmb_is_removable() fixes all these
issues.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210512202809.95363-3-danielhb413@gmail.com
|
|
As previously done in dlpar_cpu_remove() for CPUs, this patch changes
dlpar_memory_remove_by_ic() to unisolate the LMB DRC when the LMB is
failed to be removed. The hypervisor, seeing a LMB DRC that was supposed
to be removed being unisolated instead, can do error recovery on its
side.
This change is done in dlpar_memory_remove_by_ic() only because, as of
today, only QEMU is using this code path for error recovery (via the
PSERIES_HP_ELOG_ID_DRC_IC event). phyp treats it as a no-op.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210512202809.95363-2-danielhb413@gmail.com
|
|
The statement of the last "if (xxx)" branch is the same as the "else"
branch. Delete it to simplify code.
No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210510131924.3907-1-thunder.leizhen@huawei.com
|
|
Clean up the following includecheck warning:
./tools/testing/selftests/powerpc/tm/tm-vmx-unavail.c: pthread.h is
included more than once.
No functional change.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1620903820-68213-1-git-send-email-jiapeng.chong@linux.alibaba.com
|
|
dlpar_memory_remove() is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210514071041.17432-1-yuehaibing@huawei.com
|
|
The scv implementation missed updating syscall return value and error
value get/set functions to deal with the changed register ABI. This
broke ptrace PTRACE_GET_SYSCALL_INFO as well as some kernel auditing
and tracing functions.
Fix. tools/testing/selftests/ptrace/get_syscall_info now passes when
scv is used.
Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: "Dmitry V. Levin" <ldv@altlinux.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210520111931.2597127-2-npiggin@gmail.com
|
|
between sc and scv syscalls
The sc and scv 0 system calls have different ABI conventions, and
ptracers need to know which system call type is being used if they want
to look at the syscall registers.
Document that pt_regs.trap can be used for this, and fix one in-tree user
to work with scv 0 syscalls.
Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: "Dmitry V. Levin" <ldv@altlinux.org>
Suggested-by: "Dmitry V. Levin" <ldv@altlinux.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210520111931.2597127-1-npiggin@gmail.com
|
|
The immediate problem is that after commit
0bd3f9e953bd ("powerpc/legacy_serial: Use early_ioremap()") the kernel
silently reboots on some systems.
The reason is that early_ioremap() returns broken addresses as it uses
slot_virt[] array which initialized with offsets from FIXADDR_TOP ==
IOREMAP_END+FIXADDR_SIZE == KERN_IO_END - FIXADDR_SIZ + FIXADDR_SIZE ==
__kernel_io_end which is 0 when early_ioremap_setup() is called.
__kernel_io_end is initialized little bit later in early_init_mmu().
This fixes the initialization by swapping early_ioremap_setup() and
early_init_mmu().
Fixes: 265c3491c4bc ("powerpc: Add support for GENERIC_EARLY_IOREMAP")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop unrelated cleanup & cleanup change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210520032919.358935-1-aik@ozlabs.ru
|
|
We recently discovered some of our mitigation patching was not safe
against other CPUs running concurrently.
Add a test which enable/disables all mitigations in a tight loop while
also running some stress load. On an unpatched system this almost always
leads to an oops and panic/reboot, but we also check if the kernel
becomes tainted in case we have a non-fatal oops.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210507064225.1556312-1-mpe@ellerman.id.au
|
|
Move the PAGE bits into pgtable.h to be more similar to book3s/64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7f4aaa479569328a1e5b07c96c08fbca0cd7dd88.1620307890.git.christophe.leroy@csgroup.eu
|
|
If neither KUAP nor PPC64 is selected, there is nothing in the second
union of struct pt_regs, so the alignment padding is waste of memory.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d536bbc46094f66b24d3017343be25164f232933.1620307840.git.christophe.leroy@csgroup.eu
|
|
In most cases, kuap_update_sr() will update a single segment
register.
We know that first update will always be done, if there is no
segment register to update at all, kuap_update_sr() is not
called.
Avoid recurring calculations and tests in that case.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/848f18d213b8341939add7302dc4ef80cc7a12e3.1620307636.git.christophe.leroy@csgroup.eu
|
