| Age | Commit message (Collapse) | Author |
|---|
|
After adding display power domain for Exynos5250 in commit
2d2c9a8d0a4f ("ARM: dts: add display power domain for exynos5250") the
display on Chromebook Snow and others stopped working after boot.
The reason for this suggested Andrzej Hajda: the DP clock was disabled.
This clock is required by Display Port and is enabled by bootloader.
However when FIMD driver probing was deferred, the display power domain
was turned off. This effectively reset the value of DP clock enable
register.
When exynos-dp is later probed, the clock is not enabled and display is
not properly configured:
exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok
exynos-dp 145b0000.dp-controller: unable to config video
Fixes: 2d2c9a8d0a4f ("ARM: dts: add display power domain for exynos5250")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
>From the commit "drm/exynos: fix the execution order in FIMD
initialization" (598285bfdce46d7c47632a2ba4b980f60be4a677), the error
checking code is removed improperly. This patch fix the regression.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Because the helper function which calls this callback checks whether
it is registered or not. It is not necessary if it does nothing.
So it would be better to remove the function for clarity.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Calculation ratio from exynos_drm plane codes, then each hw drivers can
use it without extra operation. Also this fixes width and height of
source used for actual crtc shown via screen.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
It's more reasonable to use src_x and src_y to represent source as
counterpart of destination(crtc). Already we are using src_width and
src_height for width and height of source.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
While the VP (video processor) supports arbitrary scaling
of its input, the mixer just supports a simple 2x (line
doubling) scaling. Expose this functionality and exit
early when an unsupported scaling configuration is
encountered.
This was tested with modetest's DRM plane test (from
the libdrm test suite) on an Odroid-X2 (Exynos4412).
v2: Put if- and return-statement on different lines.
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The messages are redundant since 'check_fb_gem_memory_type'
already prints out exactly the same string when it fails.
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Use the correct spelling for 'progressive'.
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
As for now there is no validation of incoming buffer
enqueue request as far as the gem buffers are being
concerned. This might lead to some undesired cases
when the driver tries to operate on invalid buffers
(wiht no valid gem object handle i.e.).
Add some basic checks to rule out those potential issues.
Signed-off-by: Beata Michalska <b.michalska@samsung.com>
[mszyprow: rebased onto v4.0-rc1 and adapted to recent ipp changes]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The goal of the change is to make sure we send the vblank event on the
current vblank. My hope is to fix any races that might be causing flicker.
After this change I only see a flicker in the transition plymouth and
X11.
Simplified the code by tracking vblank events on a per-crtc basis. This
allowed me to remove all error paths from the callback. It also allowed
me to remove the vblank wait from the callback.
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
These functions were already removed by previous cleanup work, but these
ones were left behind.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The .destroy() callback for exynos can be replaced by drm_plane_cleanup().
The only extra operation on exynos_plane_destroy() was a call to
exynos_plane_disable() but the plane is already disabled by a earlier call
to drm_framebuffer_remove().
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
We already set each plane zpos at init, after that changes to zpos are
not expected. This patch turns zpos into a read-only property so now it is
impossible to set zpos.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Usually userspace don't want to have two overlay planes on the same zpos
so this change assign a different zpos for each plane. Before this change
a zpos of value zero was created for all planes so the userspace had to
set up the zpos of every plane it wanted to use.
Also all places that were storing zpos positions are now unsigned int.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
struct {fimd,mixer,vidi}_win_data was just keeping the same data
as struct exynos_drm_plane thus get ride of it and use exynos_drm_plane
directly.
It changes how planes are created and remove .win_mode_set() callback
that was only filling all *_win_data structs.
v2: check for return of exynos_plane_init()
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
None of the exynos crtc drivers implements win_enable() so remove it for
better clarity of the code.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
XR24 planes were not shown properly, so now set the right registers
to correctly enable displaying these planes.
It also moves the alpha register settings to fimd_win_set_pixfmt()
to keep all pixel format stuff together.
v2: remove leftover var alpha
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Linux 4.0-rc7
Requested by Alex for fixes -next needs.
Conflicts:
drivers/gpu/drm/i915/intel_sprite.c
|
|
git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm limit fixes
Fix IPU IC downscaler to its hardware limitation of 4:1 and the
IPU DI pixel clock divider integer part to 8-bit.
* tag 'imx-drm-fixes-2015-03-31' of git://git.pengutronix.de/git/pza/linux:
gpu: ipu-v3: turns out the IPU can only downsize 4:1
gpu: ipu-v3: limit pixel clock divider to 8-bits
drm/radeon: programm the VCE fw BAR as well
drm/radeon: always dump the ring content if it's available
radeon: Do not directly dereference pointers to BIOS area.
drm/radeon/dpm: fix 120hz handling harder
|
|
drm-next
1) support for "stolen mem" for splash-screen take-over
2) additional hdmi pixel clks
3) various pipe flush related fixes
4) support for snapdragon 410 (8x16)
5) support for DSI and dual-DSI
It includes one small patch to export tile-group functions (which was ack'd
by you), as these are used to explain to userspace dual-dsi configurations
(with left and right tile).
* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (24 commits)
drm/msm/mdp5: Enable DSI connector in msm drm driver
drm/msm: Initial add DSI connector support
drm/msm: Add split display interface
drm/msm/mdp5: Move *_modeset_init out of construct_encoder function
drm: export tile-group functions
drm/msm/mdp5: Remove CTL flush dummy bits
drm/msm/mdp5: Update headers (add CTL flush bits)
drm/msm/mdp5: Add hardware configuration for msm8x16
drm/msm/mdp5: Get SMP client list from mdp5_cfg
drm/msm/mdp5: Update headers (remove enum mdp5_client_id)
drm/msm/mdp5: Separate MDP5 domain from MDSS domain
drm/msm/mdp5: Update headers (introduce MDP5 domain)
drm/msm/dsi: Update generated DSI header file
drm/msm/mdp5: Fix PIPE source image size settings
drm/msm/mdp5: Update generated mdp5 header file with DSI support
drm/msm/mdp5: Add pingpong entry to mdp5 config table
drm/msm/mdp5: Make the intf connection in config module
drm/msm/mdp5: Add START signal to kick off certain pipelines
drm/msm/mdp5: Enhance operation mode for pipeline configuration
drm/msm/mdp5: Update generated header files
...
|
|
git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v4.1-rc1
This set of changes adds support for a whole bunch of new panels, mostly
simple ones. There's now also support for panels to provide display
timings rather than fixed modes, which should allow panels to work with
a larger number of display drivers. Eventually drivers should migrate to
this new interface and the fixed modes removed from panels.
There are also a couple of sparse fixes for the PS8622 and PS8625 bridge
drivers.
* tag 'drm/panel/for-4.1-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/panel: Add support for Ampire AM-800480R3TMQW-A1H 800x480 7" panel
of: Add vendor prefix for Ampire Co., Ltd.
drm/panel: Add display timing for HannStar HSD070PWW1
drm/panel: simple: Add display timing support
drm/panel: Add display timing support
drm/panel: Add support for OrtusTech COM43H4M85ULC panel
of: Add vendor prefix for Ortus Technology Co., Ltd.
drm/panel: Add bus format for Giantplus GPG482739QS5 panel
drm/panel: simple: Add support for AUO b101ean01 panel
drm/panel: simple: Add support for Innolux ZJ070NA-01P
drm/panel: simple: Add support for Innolux AT043TN24
drm/panel: simple: Add support for Shelly SCA07010-BFN-LNN
drm/panel: simple: Add support for Samsung LTN140AT29 panel
drm: Remove unused DRM_MODE_OBJECT_BRIDGE
drm/bridge: ptn3460: Fix sparse warnings
drm/bridge: ps8622: Fix sparse warnings
drm/bridge: Add I2C based driver for ps8622/ps8625 bridge
|
|
git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.1-rc1
Perhaps the most noteworthy change in this set is the implementation of
a hardware VBLANK counter using host1x syncpoints. The SOR registers can
now be dumped via debugfs, which can be useful while debugging. The IOVA
address space maintained by the driver can also be dumped via debugfs.
Other than than, these changes are mostly cleanup work, such as making
register names more consistent or removing unused code (that was left
over after the atomic mode-setting conversion). There's also a fix for
eDP that makes the driver cope with firmware that already initialized
the display (such as the firmware on the Tegra-based Chromebooks).
* tag 'drm/tegra/for-4.1-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: sor: Reset during initialization
drm/tegra: gem: Return 64-bit offset for mmap(2)
drm/tegra: hdmi: Name register fields consistently
drm/tegra: hdmi: Resets are synchronous
drm/tegra: dc: Document tegra_dc_state_setup_clock()
drm/tegra: dc: Remove unused callbacks
drm/tegra: dc: Remove unused function
drm/tegra: dc: Use base atomic state helpers
drm/atomic: Add helpers for state-subclassing drivers
drm/tegra: dc: Implement hardware VBLANK counter
gpu: host1x: Export host1x_syncpt_read()
drm/tegra: sor: Dump registers via debugfs
drm/tegra: sor: Registers are 32-bit
drm/tegra: Provide debugfs file for the IOVA space
drm/tegra: dc: Check for valid parent clock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm changes for 4.1
* universal plane support
* refactoring to prepare work atomic modesetting work
* a lot of small fixes
* tag 'omapdrm-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (36 commits)
drm/omap: tiler: add hibernation callback
drm/omap: add hibernation callbacks
drm/omap: keep ref to old_fb
drm/omap: fix race conditon in DMM
drm/omap: fix race condition with dev->obj_list
drm/omap: do not use BUG_ON(!spin_is_locked(x))
drm/omap: only ignore DIGIT SYNC LOST for TV output
drm/omap: fix race with error_irq
drm/omap: use DRM_ERROR_RATELIMITED() for error irqs
drm/omap: stop connector polling during suspend
drm/omap: remove dummy PM functions
drm/omap: tiler: fix race condition with engine->async
drm/omap: fix plane's channel selection
drm/omap: fix TILER on OMAP5
drm/omap: handle incompatible buffer stride and pixel size
drm/omap: fix error handling in omap_framebuffer_create()
drm/omap: fix operation without fbdev
drm/omap: add a comment why locking is missing
drm/omap: add pin refcounting to omap_framebuffer
drm/omap: clear omap_obj->paddr in omap_gem_put_paddr()
...
|
|
into drm-next
These are based on drm-next branch, fix some drm/rockchip problem.
Please pull them.
* 'drm-next0401' of git://github.com/markyzq/kernel-drm-rockchip:
drm/rockchip: vop: add vop power domain support
drm: rockchip: Turn off VT switching on suspend
drm/rockchip: register all connectors after bind
drm/rockchip: fix clk enable disable mismatch in vop_crtc_mode_set
|
|
|
|
Pull networking fixes from David Miller:
1) In TCP, don't register an FRTO for cumulatively ACK'd data that was
previously SACK'd, from Neal Cardwell.
2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup,
from Cong WANG.
3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also
from Cong WANG.
4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel.
5) When we encapsulate for a tunnel device, skb->sk still points to the
user socket. So this leads to cases where we retraverse the
ipv4/ipv6 output path with skb->sk being of some other address
family (f.e. AF_PACKET). This can cause things to crash since the
ipv4 output path is dereferencing an AF_PACKET socket as if it were
an ipv4 one.
The short term fix for 'net' and -stable is to elide these socket
checks once we've entered an encapsulation sequence by testing
xmit_recursion.
Longer term we have a better solution wherein we pass the tunnel's
socket down through the output paths, but that is way too invasive
for 'net' and -stable.
From Hannes Frederic Sowa.
6) l2tp_init() failure path forgets to unregister per-net ops, from
Cong WANG.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
net: dsa: fix filling routing table from OF description
l2tp: unregister l2tp_net_ops on failure path
mvneta: dont call mvneta_adjust_link() manually
ipv6: protect skb->sk accesses from recursive dereference inside the stack
netns: don't allocate an id for dead netns
Revert "netns: don't clear nsid too early on removal"
ip6mr: call del_timer_sync() in ip6mr_free_table()
net: move fib_rules_unregister() under rtnl lock
ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup
tcp: fix FRTO undo on cumulative ACK of SACKed range
xen-netfront: transmit fully GSO-sized packets
|
|
Commit 1daa4303b4ca ("net/mlx4_core: Deprecate error message at
ConnectX-2 cards startup to debug") did the deprecation only for port 1
of the card. Need to deprecate for port 2 as well.
Fixes: 1daa4303b4ca ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to description in 'include/net/dsa.h', in cascade switches
configurations where there are more than one interconnected devices,
'rtable' array in 'dsa_chip_data' structure is used to indicate which
port on this switch should be used to send packets to that are destined
for corresponding switch.
However, dsa_of_setup_routing_table() fills 'rtable' with port numbers
of the _target_ switch, but not current one.
This commit removes redundant devicetree parsing and adds needed port
number as a function argument. So dsa_of_setup_routing_table() now just
looks for target switch number by parsing parent of 'link' device node.
To remove possible misunderstandings with the way of determining target
switch number, a corresponding comment was added to the source code and
to the DSA device tree bindings documentation file.
This was tested on a custom board with two Marvell 88E6095 switches with
following corresponding routing tables: { -1, 10 } and { 8, -1 }.
Signed-off-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Updates for the input subsystem - two more tweaks for ALPS driver to
work out kinks after splitting the touchpad, trackstick, and potential
external PS/2 mouse into separate input devices.
Changes to support ALPS SS4 devices (protocol V8) will be coming in
4.1..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: alps - document stick behavior for protocol V2
Input: alps - report V2 Dualpoint Stick events via the right evdev node
Input: alps - report interleaved bare PS/2 packets via dev3
|
|
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mvneta_adjust_link() is a callback for of_phy_connect() and should
not be called directly. The result of calling it directly is as below:
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We should not consult skb->sk for output decisions in xmit recursion
levels > 0 in the stack. Otherwise local socket settings could influence
the result of e.g. tunnel encapsulation process.
ipv6 does not conform with this in three places:
1) ip6_fragment: we do consult ipv6_npinfo for frag_size
2) sk_mc_loop in ipv6 uses skb->sk and checks if we should
loop the packet back to the local socket
3) ip6_skb_dst_mtu could query the settings from the user socket and
force a wrong MTU
Furthermore:
In sk_mc_loop we could potentially land in WARN_ON(1) if we use a
PF_PACKET socket ontop of an IPv6-backed vxlan device.
Reuse xmit_recursion as we are currently only interested in protecting
tunnel devices.
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Document that protocol V2 uses standard (bare) PS/2 mouse packets for the
DualPoint stick.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-By: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
On V2 devices the DualPoint Stick reports bare packets, these should be
reported via the "AlpsPS/2 ALPS DualPoint Stick" dev2 evdev node, which also
has the INPUT_PROP_POINTING_STICK propbit set.
Note that since there is no way to distinguish these packets from an external
PS/2 mouse (insofar as these laptops have an external PS/2 port) this means
that we will be reporting PS/2 mouse events via this evdev node too, as we've
been doing in kernel 3.19 and older.
This has been tested on a Dell Latitude D620 and a Dell Latitude E6400,
which both have a V2 touchpad + a DualPoint Stick which reports bare packets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Bare packets should be reported via the same evdev device independent on
whether they are detected on the beginning of a packet or in the middle
of a packet.
This has been tested on a Dell Latitude E6400, where the DualPoint Stick
reports bare packets, which get reported via dev3 when the touchpad is
idle, and via dev2 when the touchpad and stick are used simultaneously.
This commit fixes this inconsistency by always reporting bare packets via
dev3. Note that since the come from a DualPoint Stick they really should be
reported via dev2, this gets fixed in a later commit.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device ids for 4.0-rc6. Nothing
major, some xhci fixes for reported problems, and some usb-serial
device ids.
All have been in linux-next for a while"
* tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: ftdi_sio: Use jtag quirk for SNAP Connect E10
usb: isp1760: fix spin unlock in the error path of isp1760_udc_start
usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers
usb: xhci: handle Config Error Change (CEC) in xhci driver
USB: keyspan_pda: add new device id
USB: ftdi_sio: Added custom PID for Synapse Wireless product
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some staging driver fixes, well, really all just IIO driver
fixes, for 4.0-rc6. They fix issues that have been reported with
these drivers.
All of these patches have been in linux-next for a while"
* tag 'staging-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: imu: Use iio_trigger_get for indio_dev->trig assignment
iio: adc: vf610: use ADC clock within specification
iio/adc/cc10001_adc.c: Fix !HAS_IOMEM build
iio: core: Fix double free.
iio:inv-mpu6050: Fix inconsistency for the scale channel
staging: iio: dummy: Fix undefined symbol build error
iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo
staging: iio: hmc5843: Set iio name property in sysfs
iio: bmc150: change sampling frequency
iio: fix drivers that check buffer->scan_mask
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are 3 serial driver fixes for 4.0-rc6. They fix some reported
issues with the samsung and fsl_lpuart drivers.
All have been in linux-next for a while"
* tag 'tty-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: fsl_lpuart: clear receive flag on FIFO flush
tty: serial: fsl_lpuart: specify transmit FIFO size
serial: samsung: Clear operation mode on UART shutdown
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
"A fix for ALPS driver for issue introduced in the latest update and a
tweak for yet another Lenovo box in Synaptics.
There will be more ALPS tweaks coming.."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: define INPUT_PROP_ACCELEROMETER behavior
Input: synaptics - fix min-max quirk value for E440
Input: synaptics - add quirk for Thinkpad E440
Input: ALPS - fix max coordinates for v5 and v7 protocols
Input: add MT_TOOL_PALM
|
|
Pull block layer fix from Jens Axboe:
"Just one patch in this pull request, fixing a regression caused by a
'mathematically correct' change to lcm()"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: fix blk_stack_limits() regression due to lcm() change
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a SYSRET single-stepping fix, a dmi-scan robustization
fix, a reboot quirk and a kgdb fixlet"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kgdb/x86: Fix reporting of 'si' in kgdb on x86_64
x86/asm/entry/64: Disable opportunistic SYSRET if regs->flags has TF set
x86/reboot: Add ASRock Q1900DC-ITX mainboard reboot quirk
MAINTAINERS: Change the x86 microcode loader maintainer
firmware: dmi_scan: Prevent dmi_num integer overflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Two x86 Intel PMU constraint handling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix Haswell CYCLE_ACTIVITY.* counter constraints
perf/x86/intel: Filter branches for PEBS event
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux
Pull devicetree fix from Grant Likely:
"Simple bugfix for bad device tree data on the PA-Semi platform"
* tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux:
drivers/of: Add empty ranges quirk for PA-Semi
|
|
Pull CIFS fixes from Steve French:
"A set of small cifs fixes fixing a memory leak, kernel oops, and
infinite loop (and some spotted by Coverity)"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
Fix warning
Fix another dereference before null check warning
CIFS: session servername can't be null
Fix warning on impossible comparison
Fix coverity warning
Fix dereference before null check warning
Don't ignore errors on encrypting password in SMBTcon
Fix warning on uninitialized buftype
cifs: potential memory leaks when parsing mnt opts
cifs: fix use-after-free bug in find_writable_file
cifs: smb2_clone_range() - exit on unhandled error
|
|
First, let's explain the problem.
Suppose you have an ipip interface that stands in the netns foo and its link
part in the netns bar (so the netns bar has an nsid into the netns foo).
Now, you remove the netns bar:
- the bar nsid into the netns foo is removed
- the netns exit method of ipip is called, thus our ipip iface is removed:
=> a netlink message is built in the netns foo to advertise this deletion
=> this netlink message requests an nsid for bar, thus a new nsid is
allocated for bar and never removed.
This patch adds a check in peernet2id() so that an id cannot be allocated for
a netns which is currently destroyed.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts
commit 4217291e592d ("netns: don't clear nsid too early on removal").
This is not the right fix, it introduces races.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reference the power domain incase vop power down when
in use.
Signed-off-by: Mark Yao <yzq@rock-chips.com>
|
|
drm/rockchip already has support for disabling all displays on suspend
and enabling them on resume.
Disable automatic VT switching on suspend by the pm console tracking
layer.
Tested on veyron, used `echo mem > sys/power/state`
=> verified no VT switch
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
|
|
Register connectors with userspace after all components are bound.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Dominik Behr <dbehr@chromium.org>
drm_connector_get_name -> connector->name
This patch is necessary to make X11 see screens it seems.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The function disables the dclk at the beginning, so don't simply return
when an error happens, but instead enable the clock again, so that
enable and disable calls are balanced.
ret_clk is introduced to hold the clk_enable result and not mangle the
original error code.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
|
