summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-10-31ldmvsw: tx queue stuck in stopped state after LDC resetAaron Young
The following patch fixes an issue with the ldmvsw driver where the network connection of a guest domain becomes non-functional after the guest domain has panic'd and rebooted. The root cause was determined to be from the following series of events: 1. Guest domain panics - resulting in the guest no longer processing network packets (from ldmvsw driver) 2. The ldmvsw driver (in the control domain) eventually exerts flow control due to no more available tx drings and stops the tx queue for the guest domain 3. The LDC of the network connection for the guest is reset when the guest domain reboots after the panic. 4. The LDC reset event is received by the ldmvsw driver and the ldmvsw responds by clearing the tx queue for the guest. 5. ldmvsw waits indefinitely for a DATA ACK from the guest - which is the normal method to re-enable the tx queue. But the ACK never comes because the tx queue was cleared due to the LDC reset. To fix this issue, in addition to clearing the tx queue, re-enable the tx queue on a LDC reset. This prevents the ldmvsw from getting caught in this deadlocked state of waiting for a DATA ACK which will never come. Signed-off-by: Aaron Young <Aaron.Young@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31Merge branch 'xps-DCB'David S. Miller
Alexander Duyck says: ==================== Add support for XPS when using DCB This patch series enables proper isolation between traffic classes when using XPS while DCB is enabled. Previously enabling XPS would cause the traffic to be potentially pulled from one traffic class into another on egress. This change essentially multiplies the XPS map by the number of traffic classes and allows us to do a lookup per traffic class for a given CPU. To guarantee the isolation I invalidate the XPS map for any queues that are moved from one traffic class to another, or if we change the number of traffic classes. v2: Added sysfs to display traffic class Replaced do/while with for loop Cleaned up several other for for loops throughout the patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31net: Add support for XPS with QoS via traffic classesAlexander Duyck
This patch adds support for setting and using XPS when QoS via traffic classes is enabled. With this change we will factor in the priority and traffic class mapping of the packet and use that information to correctly select the queue. This allows us to define a set of queues for a given traffic class via mqprio and then configure the XPS mapping for those queues so that the traffic flows can avoid head-of-line blocking between the individual CPUs if so desired. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31net: Refactor removal of queues from XPS map and apply on num_tc changesAlexander Duyck
This patch updates the code for removing queues from the XPS map and makes it so that we can apply the code any time we change either the number of traffic classes or the mapping of a given block of queues. This way we avoid having queues pulling traffic from a foreign traffic class. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31net: Add sysfs value to determine queue traffic classAlexander Duyck
Add a sysfs attribute for a Tx queue that allows us to determine the traffic class for a given queue. This will allow us to more easily determine this in the future. It is needed as XPS will take the traffic class for a group of queues into account in order to avoid pulling traffic from one traffic class into another. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31net: Move functions for configuring traffic classes out of inline headersAlexander Duyck
The functions for configuring the traffic class to queue mappings have other effects that need to be addressed. Instead of trying to export a bunch of new functions just relocate the functions so that we can instrument them directly with the functionality they will need. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31driver: tun: Use new macro SOCK_IOC_TYPE instead of literal number 0x89Gao Feng
The current codes use _IOC_TYPE(cmd) == 0x89 to check if the cmd is one socket ioctl command like SIOCGIFHWADDR. But the literal number 0x89 may confuse readers. So create one macro SOCK_IOC_TYPE to enhance the readability. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31net: add an ioctl to get a socket network namespaceAndrey Vagin
Each socket operates in a network namespace where it has been created, so if we want to dump and restore a socket, we have to know its network namespace. We have a socket_diag to get information about sockets, it doesn't report sockets which are not bound or connected. This patch introduces a new socket ioctl, which is called SIOCGSKNS and used to get a file descriptor for a socket network namespace. A task must have CAP_NET_ADMIN in a target network namespace to use this ioctl. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31mv643xx_eth: Properly resolve merge conflict.David S. Miller
The second SET_NETDEV_DEV() in the hunk should be removed. Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31mv643xx_eth: Fix merge error.David S. Miller
One merge conflict block wasn't resolved. Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30Merge tag 'shared-for-4.10-1' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma Saeed Mahameed says: ==================== Mellanox mlx5 core driver updates 2016-10-25 This series contains some updates and fixes of mlx5 core and IB drivers with the addition of two features that demand new low level commands and infrastructure updates. - SRIOV VF max rate limit support - mlx5e tc support for FWD rules with counter. Needed for both net and rdma subsystems. Updates and Fixes: From Saeed Mahameed (2): - mlx5 IB: Skip handling unknown mlx5 events - Add ConnectX-5 PCIe 4.0 VF device ID From Artemy Kovalyov (2): - Update struct mlx5_ifc_xrqc_bits - Ensure SRQ physical address structure endianness From Eugenia Emantayev (1): - Fix length of async_event_mask New Features: From Mohamad Haj Yahia (3): mlx5 SRIOV VF max rate limit support - Introduce TSAR manipulation firmware commands - Introduce E-switch QoS management - Add SRIOV VF max rate configuration support From Mark Bloch (7): mlx5e Tc support for FWD rule with counter - Don't unlock fte while still using it - Use fte status to decide on firmware command - Refactor find_flow_rule - Group similar rules under the same fte - Add multi dest support - Add option to add fwd rule with counter - mlx5e tc support for FWD rule with counter Mark here fixed two trivial issues with the flow steering core, and did some refactoring in the flow steering API to support adding mulit destination rules to the same hardware flow table entry at once. In the last two patches added the ability to populate a flow rule with a flow counter to the same flow entry. V2: Dropped some patches that added new structures without adding any usage of them. Added SRIOV VF max rate configuration support patch that introduces the usage of the TSAR infrastructure. Added flow steering fixes and refactoring in addition to mlx5 tc support for forward rule with counter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30net: bonding: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30Merge branch 'mlxsw-IB'David S. Miller
Jiri Pirko says: ==================== mlxsw: Add Infiniband support for Mellanox switches This patchset adds basic Infiniband support for SwitchX-2, Switch-IB and Switch-IB-2 ASIC drivers. SwitchX-2 ASIC is VPI capable, which means each port can be either Ethernet or Infiniband. When the port is configured as Infiniband, the Subnet Management Agent (SMA) is managed by the SwitchX-2 firmware and not by the host. Port configuration, MTU and more are configured remotely by the Subnet Manager (SM). Usage: $ devlink port show pci/0000:03:00.0/1: type eth netdev eth0 pci/0000:03:00.0/3: type eth netdev eth1 pci/0000:03:00.0/5: type eth netdev eth2 pci/0000:03:00.0/6: type eth netdev eth3 pci/0000:03:00.0/8: type eth netdev eth4 $ devlink port set pci/0000:03:00.0/1 type ib $ devlink port show pci/0000:03:00.0/1: type ib Switch-IB (FDR) and Switch-IB-2 (EDR 100Gbs) ASICs are Infiniband-only switches. The support provided in the mlxsw_switchib.ko driver is port initialization only. The firmware running in the Silicon implements the SMA. Please note that this patchset does only very basic port initialization. ib_device or RDMA implementations are not part of this patchset. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: switchib: Introduce SwitchIB and SwitchIB silicon driverElad Raz
SwitchIB and SwitchIB-2 are Infiniband switches with up to 36 ports. This driver initialize the hardware and Firmware which implements the IB management and connection with the SM. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: switchx2: Add IB port supportElad Raz
SwitchX-2 is IB capable device. This patch add a support to change the port type between Ethernet and Infiniband. When the port is set to IB, the FW implements the Subnet Management Agent (SMA) manage the port. All port attributes can be control remotely by the SM. Usage: $ devlink port show pci/0000:03:00.0/1: type eth netdev eth0 pci/0000:03:00.0/3: type eth netdev eth1 pci/0000:03:00.0/5: type eth netdev eth2 pci/0000:03:00.0/6: type eth netdev eth3 pci/0000:03:00.0/8: type eth netdev eth4 $ devlink port set pci/0000:03:00.0/1 type ib $ devlink port show pci/0000:03:00.0/1: type ib Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: switchx2: Add eth prefix to port create and removeElad Raz
Since we are about to add Infiniband port remove and create we will add "eth" prefix to port create and remove APIs. Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: core: Add port type (Eth/IB) set APIElad Raz
Add "port_type_set" API to mlxsw core. The core layer send the change type callback to the port along with it's private information. Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: core: Add "eth" prefix to mlxsw_core_port_setElad Raz
Since we are about to introduce IB port APIs, we will add prefixes to existing APIs. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: switchx2: Add Infiniband switch partitionElad Raz
In order to put a port in Infiniband fabric it should be assigned to separate swid (Switch partition) that initialized as IB swid. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: Make devlink port instances independent of spectrum/switchx2 port ↵Jiri Pirko
instances Currently, devlink register/unregister is done directly from spectrum/switchx2 port create/remove functions. With a need to introduce a port type change, the devlink port instances have to be persistent across type changes, therefore across port create/remove function calls. So do a bit of reshuffling to achieve that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: reg: Add local-port to Infiniband port mappingElad Raz
In order to change a port type to Infiniband port we should change his mapping from local-port to Infiniband. Adding the PLIB (Port Local to InfiniBand) allows this mapping. Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: reg: Add Infiniband support to PTYSElad Raz
In order to support Infiniband fabric, we need to introduce IB speeds and capabilities to PTYS emads. Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: reg: Add eth prefix to PTYS pack and unpackElad Raz
We want to add Infiniband support to PTYS. In order to maintain proper conventions, we will change pack and unpack prefix to eth. Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: switchx2: Fix port speed configurationElad Raz
In SwitchX-2 we configure the port speed to negotiate with 40G link only. Add support for all other supported speeds. Fixes: 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support") Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: switchx2: Add support for physical port namesElad Raz
Export to userspace the front panel name of the port, so that udev can rename the ports accordingly. The convention suggested by switchdev documentation is used: pX Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: spectrum: Move port used check outside port remove functionJiri Pirko
Be symmentrical with create and do the check outside the remove function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: switchx2: Move port used check outside port remove functionJiri Pirko
Be symmentrical with create and do the check outside the remove function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: switchx2: Check if port is usable before calling port createJiri Pirko
Do it in a same way we do it in spectrum. Check if port is usable first and only in that case create a port instance. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30mlxsw: core: Zero payload buffers for couple of registersElad Raz
We recently discovered a bug in the firmware in which a field's length in one of the registers was incorrectly set. This caused the firmware to access garbage data that wasn't initialized by the driver and therefore emit error messages. While the bug is already fixed and the driver usually zeros the buffers passed to the firmware, there are a handful of cases where this isn't done. Zero the buffer in these cases and prevent similar bugs from recurring, as they tend to be hard to debug. Fixes: 52581961d83d ("mlxsw: core: Implement fan control using hwmon") Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30net/mlx5e: Add tc support for FWD rule with counterMark Bloch
When creating a FWD rule using tc create also a HW counter for this rule. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-30net/mlx5: Add option to add fwd rule with counterMark Bloch
Currently the code supports only drop rules to possess counters, add that ability also for fwd rules. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-30net/mlx5: Add multi dest supportMark Bloch
Currently when calling mlx5_add_flow_rule we accept only one flow destination, this commit allows to pass multiple destinations. This change forces us to change the return structure to a more flexible one. We introduce a flow handle (struct mlx5_flow_handle), it holds internally the number for rules created and holds an array where each cell points the to a flow rule. From the consumers (of mlx5_add_flow_rule) point of view this change is only cosmetic and requires only to change the type of the returned value they store. From the core point of view, we now need to use a loop when allocating and deleting rules (e.g given to us a flow handler). Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-30net/mlx5: Group similer rules under the same fteMark Bloch
When adding a new rule, if we can match it with compare_match_value and flow tag we might be able to insert the rule to the same fte. In order to do that, there must be an overlap between the actions of the fte and the new rule. When updating the action of an existing fte, we must tell the firmware we are doing so. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-30net/mlx5: Refactor find_flow_ruleMark Bloch
The way we compare between two dests will need to be used in other places in the future, so we factor out the comparison logic between two dests into a separate function. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-30net/mlx5: Use fte status to decide on firmware commandMark Bloch
An fte status becomes FS_FTE_STATUS_EXISTING only after it was created in HW. We can use this in order to simplify the logic on what firmware command to use. If the status isn't FS_FTE_STATUS_EXISTING we need to create the fte, otherwise we need only to update it. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-30net/mlx5: Don't unlock fte while still using itMark Bloch
When adding a new rule to an fte, we need to hold the fte lock until we add that rule to the fte and increase the fte ref count. Fixes: 0c56b97503fd ("net/mlx5_core: Introduce flow steering API") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-30net/mlx5: Add SRIOV VF max rate configuration supportMohamad Haj Yahia
Implement the vf set rate ndo by modifying the TSAR vport rate limit. Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-30net/mlx5: Introduce E-switch QoS managementMohamad Haj Yahia
Add TSAR to the eswitch which will act as the vports rate limiter. Create/Destroy TSAR on Enable/Dsiable SRIOV. Attach/Detach vport to eswitch TSAR on Enable/Disable vport. Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-30net/mlx5: Introduce TSAR manipulation firmware commandsMohamad Haj Yahia
TSAR (stands for Transmit Scheduling ARbiter) is a hardware component that is responsible for selecting the next entity to serve on the transmit path. The arbitration defines the QoS policy between the agents connected to the TSAR. The TSAR is a consist two main features: 1) BW Allocation between agents: The TSAR implements a defecit weighted round robin between the agents. Each agent attached to the TSAR is assigned with a weight and it is awarded transmission tokens according to this weight. 2) Rate limer per agent: Each agent attached to the TSAR is (optionally) assigned with a rate limit. TSAR will not allow scheduling for an agent exceeding its defined rate limit. In this patch we implement the API of manipulating the TSAR. Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-30net/mlx5: Add ConnectX-5 PCIe 4.0 VF device IDSaeed Mahameed
For the mlx5 driver to support ConnectX-5 PCIe 4.0 VFs, we add the device ID "0x101a" to mlx5_core_pci_table. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-30net/mlx5: Fix length of async_event_maskEugenia Emantayev
According to PRM async_event_mask have to be 64 bits long. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-30net/mlx5: Ensure SRQ physical address structure endiannessArtemy Kovalyov
SRQ physical address structure field should be in big-endian format. Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-30net/mlx5: Update struct mlx5_ifc_xrqc_bitsArtemy Kovalyov
Update struct mlx5_ifc_xrqc_bits according to last specification Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-30IB/mlx5: Skip handling unknown eventsSaeed Mahameed
Do not dispatch unknown mlx5 core events on mlx5_ib_event. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-10-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Lots of fixes, mostly drivers as is usually the case. 1) Don't treat zero DMA address as invalid in vmxnet3, from Alexey Khoroshilov. 2) Fix element timeouts in netfilter's nft_dynset, from Anders K. Pedersen. 3) Don't put aead_req crypto struct on the stack in mac80211, from Ard Biesheuvel. 4) Several uninitialized variable warning fixes from Arnd Bergmann. 5) Fix memory leak in cxgb4, from Colin Ian King. 6) Fix bpf handling of VLAN header push/pop, from Daniel Borkmann. 7) Several VRF semantic fixes from David Ahern. 8) Set skb->protocol properly in ip6_tnl_xmit(), from Eli Cooper. 9) Socket needs to be locked in udp_disconnect(), from Eric Dumazet. 10) Div-by-zero on 32-bit fix in mlx4 driver, from Eugenia Emantayev. 11) Fix stale link state during failover in NCSCI driver, from Gavin Shan. 12) Fix netdev lower adjacency list traversal, from Ido Schimmel. 13) Propvide proper handle when emitting notifications of filter deletes, from Jamal Hadi Salim. 14) Memory leaks and big-endian issues in rtl8xxxu, from Jes Sorensen. 15) Fix DESYNC_FACTOR handling in ipv6, from Jiri Bohac. 16) Several routing offload fixes in mlxsw driver, from Jiri Pirko. 17) Fix broadcast sync problem in TIPC, from Jon Paul Maloy. 18) Validate chunk len before using it in SCTP, from Marcelo Ricardo Leitner. 19) Revert a netns locking change that causes regressions, from Paul Moore. 20) Add recursion limit to GRO handling, from Sabrina Dubroca. 21) GFP_KERNEL in irq context fix in ibmvnic, from Thomas Falcon. 22) Avoid accessing stale vxlan/geneve socket in data path, from Pravin Shelar" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (189 commits) geneve: avoid using stale geneve socket. vxlan: avoid using stale vxlan socket. qede: Fix out-of-bound fastpath memory access net: phy: dp83848: add dp83822 PHY support enic: fix rq disable tipc: fix broadcast link synchronization problem ibmvnic: Fix missing brackets in init_sub_crq_irqs ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context Revert "ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context" arch/powerpc: Update parameters for csum_tcpudp_magic & csum_tcpudp_nofold net/mlx4_en: Save slave ethtool stats command net/mlx4_en: Fix potential deadlock in port statistics flow net/mlx4: Fix firmware command timeout during interrupt test net/mlx4_core: Do not access comm channel if it has not yet been initialized net/mlx4_en: Fix panic during reboot net/mlx4_en: Process all completions in RX rings after port goes up net/mlx4_en: Resolve dividing by zero in 32-bit system net/mlx4_core: Change the default value of enable_qos net/mlx4_core: Avoid setting ports to auto when only one port type is supported net/mlx4_core: Fix the resource-type enum in res tracker to conform to FW spec ...
2016-10-29firewire: net: really fix maximum possible MTUStefan Richter
The maximum unicast datagram size /without/ link fragmentation is 4096 - 4 = 4092 (max IEEE 1394 async payload size at >= S800 bus speed, minus unfragmented encapssulation header). Max broadcast datagram size without fragmentation is 8 bytes less than that (due to GASP header). The maximum datagram size /with/ link fragmentation is 0xfff = 4095 for unicast and broadcast. This is because the RFC 2734 fragment encapsulation header field for datagram size is only 12 bits wide. Fixes: 5d48f00d836a('firewire: net: fix maximum possible MTU') Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29genetlink: Fix generic netlink family unregisterpravin shelar
This patch fixes a typo in unregister operation. Following crash is fixed by this patch. It can be easily reproduced by repeating modprobe and rmmod module that uses genetlink. [ 261.446686] BUG: unable to handle kernel paging request at ffffffffa0264088 [ 261.448921] IP: [<ffffffff813cb70e>] strcmp+0xe/0x30 [ 261.450494] PGD 1c09067 [ 261.451266] PUD 1c0a063 [ 261.452091] PMD 8068d5067 [ 261.452525] PTE 0 [ 261.453164] [ 261.453618] Oops: 0000 [#1] SMP [ 261.454577] Modules linked in: openvswitch(+) ... [ 261.480753] RIP: 0010:[<ffffffff813cb70e>] [<ffffffff813cb70e>] strcmp+0xe/0x30 [ 261.483069] RSP: 0018:ffffc90003c0bc28 EFLAGS: 00010282 [ 261.510145] Call Trace: [ 261.510896] [<ffffffff816f10ca>] genl_family_find_byname+0x5a/0x70 [ 261.512819] [<ffffffff816f2319>] genl_register_family+0xb9/0x630 [ 261.514805] [<ffffffffa02840bc>] dp_init+0xbc/0x120 [openvswitch] [ 261.518268] [<ffffffff8100217d>] do_one_initcall+0x3d/0x160 [ 261.525041] [<ffffffff811808a9>] do_init_module+0x60/0x1f1 [ 261.526754] [<ffffffff8110687f>] load_module+0x22af/0x2860 [ 261.530144] [<ffffffff81107026>] SYSC_finit_module+0x96/0xd0 [ 261.531901] [<ffffffff8110707e>] SyS_finit_module+0xe/0x10 [ 261.533605] [<ffffffff8100391e>] do_syscall_64+0x6e/0x180 [ 261.535284] [<ffffffff817c2faf>] entry_SYSCALL64_slow_path+0x25/0x25 [ 261.546512] RIP [<ffffffff813cb70e>] strcmp+0xe/0x30 [ 261.550198] ---[ end trace 76505a814dd68770 ]--- Fixes: 2ae0f17df1c ("genetlink: use idr to track families"). Reported-by: Jarno Rajahalme <jarno@ovn.org> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29geneve: avoid using stale geneve socket.pravin shelar
This patch is similar to earlier vxlan patch. Geneve device close operation frees geneve socket. This operation can race with geneve-xmit function which dereferences geneve socket. Following patch uses RCU mechanism to avoid this situation. Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29vxlan: avoid using stale vxlan socket.pravin shelar
When vxlan device is closed vxlan socket is freed. This operation can race with vxlan-xmit function which dereferences vxlan socket. Following patch uses RCU mechanism to avoid this situation. Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 12:45:17 +0000