summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-05[media] bw-qcam: convert to videobuf2Hans Verkuil
I know, nobody really cares about this black-and-white webcam anymore, but it was fun to do. Tested with an actual webcam. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] bw-qcam: zero priv fieldHans Verkuil
Fix a v4l2-compliance problem: the priv field of v4l2_pix_format must be cleared by drivers. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] radio-miropcm20: fix signal and stereo indicationHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] radio-miropcm20: Fix audmode/tuner/frequency handlingHans Verkuil
- instead of a mute module option, use audmode as per the spec. - clamp the frequency before setting it. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] radio-miropcm20: add prio and control event supportHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] radio-miropcm20: convert to the control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] radio-miropcm20: remove input/audio ioctlsHans Verkuil
Such ioctls are not valid for radio devices. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] radio-miropcm20: fix querycapHans Verkuil
Don't set version (done by the v4l2 core), fill in bus_info, set correct driver name and add device_caps support. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] tvaudio: convert to the control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] tvaudio: fix two tea6420 errorsHans Verkuil
The inputmask for the tea6420 wasn't set and the wrong mute register value was used. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] tvaudio: fix broken volume/balance calculationsHans Verkuil
The balance control did not do what it is supposed to do due to wrong calculations. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] mt9v011: convert to the control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] Move DV-class control IDs from videodev2.h to v4l2-controls.hHans Verkuil
When the control IDs were split off from videodev2.h to v4l2-controls.h these new Digital Video controls were forgotten (the two patches may have crossed one another). Move these controls to their proper place in v4l2-controls.h. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-fimc: Redefine platform data structure for fimc-isSylwester Nawrocki
Newer Exynos4 SoC are equipped with a local camera ISP that controls external raw image sensor directly. Such sensors can be connected through FIMC-LITEn (and MIPI-CSISn) IPs to the ISP, which then feeds image data to the FIMCn IP. Thus there can be two busses associated with an image source (sensor). Rename struct s5p_fimc_isp_info describing external image sensor (video decoder) to struct fimc_source_info to avoid confusion. bus_type is split into fimc_bus_type and sensor_bus_type. The bus type enumeration is extended to include both FIMC Writeback input types. The bus_type enumeration and the data structure name in the board files are modified according to the above changes. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] MAINTAINERS: Add s5c73m3 driver entryAndrzej Hajda
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5c73m3: Use devm_regulator_bulk_get APISachin Kamat
devm_regulator_bulk_get saves some cleanup and exit code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-fimc: Add clk_prepare/unprepare for sclk_cam clocksSylwester Nawrocki
Add clk_prepare(), clk_unprepare() calls for the sclk_cam clocks to ensure the driver works on platforms with the common clocks API enabled. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-fimc: Fix FIMC.n subdev set_selection ioctl handlerSylwester Nawrocki
The V4L2_SEL_TGT_CROP_BOUNDS, V4L2_SEL_TGT_COMPOSE_BOUNDS selection targets are not supposed to be handled in the set_selection ioctl. Remove the code that doesn't do anything sensible now and make sure ctx->state is modified with the spinlock held. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-fimc: Set default image format at device open()Sylwester Nawrocki
Make sure a valid image format is initially set on both the CAPTURE and the OUTPUT buffer queue. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-fimc: Avoid null pointer dereference in fimc_capture_ctrls_create()Sylwester Nawrocki
With presence of some faults, e.g. caused by wrong platform data or the device tree structure the IDX_SENSOR entry in the array may be NULL, so make sure it is not dereferenced then. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5c73m3: Staticize some symbolsSachin Kamat
Fixes the following sparse warnings: drivers/media/i2c/s5c73m3/s5c73m3-core.c:42:5: warning: symbol 'boot_from_rom' was not declared. Should it be static? drivers/media/i2c/s5c73m3/s5c73m3-core.c:45:5: warning: symbol 'update_fw' was not declared. Should it be static? drivers/media/i2c/s5c73m3/s5c73m3-core.c:298:5: warning: symbol 's5c73m3_isp_comm_result' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-csis: Check return value of clk_enable/clk_set_rateSylwester Nawrocki
clk_set_rate(), clk_enable() functions can fail, so check the return values to avoid surprises. While at it use ERR_PTR() value to indicate an invalid clock. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-fimc: Check return value of clk_enable/clk_set_rateSylwester Nawrocki
clk_set_rate(), clk_enable() functions can fail, so check the return values to avoid surprises. While at it use ERR_PTR() value to indicate an invalid clock. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-fimc: Change platform subdevs registration methodSylwester Nawrocki
The previous method of registering platform entities into the main driver using driver_find() and then iterating over devices bound to a driver was racy and is being removed here. Nothing was preventing module from unloading during a call to try_module_get(driver->owner). Instead, we look up a device first and then check for its driver while holding device lock. The platform sub-devices are looked up and registered to the top level driver. When any sub-device is not yet initialized and ready the main driver's probe() will be deferred. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-fimc: Add missing line breaksSylwester Nawrocki
Add missing line breaks in the debug traces. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-csis: Use devm_regulator_bulk_get APISachin Kamat
devm_regulator_bulk_get is device managed and saves some cleanup and exit code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-fimc: fimc-lite: Prevent deadlock at STREAMON/OFF ioctlsSylwester Nawrocki
This patch fixes regression introduced in commit 6319d6a002beb26631 '[media] fimc-lite: Add ISP FIFO output support'. In case of a configuration where video is captured at the video node exposed by the FIMC-LITE driver there is a following video pipeline: sensor -> MIPI-CSIS.n -> FIMC-LITE.n subdev -> FIMC-LITE.n video node In this situation s_stream() handler of the FIMC-LITE.n is called back from within VIDIOC_STREAMON/OFF ioctl of the FIMC-LITE.n video node, through vb2_stream_on/off(), start/stop_streaming and fimc_pipeline_call(set_stream). The fimc->lock mutex is already held then, before invoking vidioc_streamon/off. So it must not be taken again in the s_stream() callback in this case, to avoid a deadlock. This patch makes fimc->out_path atomic_t so the mutex don't need to be taken in the FIMC-LITE subdev s_stream() callback in the DMA output case. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyugmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-fimc: fimc-lite: Remove empty s_power subdev callbackSylwester Nawrocki
The .s_power FIMC-LITE subdev callback is now empty and unneeded. The FIMC-LITE IP power handling will be done by the FIMC-IS driver, so just remove the callback. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add S5C73M3 camera driverAndrzej Hajda
Add driver for S5C73M3 image sensor. The driver exposes the sensor as two subdevs: pure sensor and output interface. Two subdev architecture supports interleaved UYVY/JPEG image format with separate frame size for both sub-formats, there is a spearate pad for each sub-format. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-mfc: Fix kernel warning on memory initArun Kumar K
Cleaned up the memory devices allocation code and added missing device_initialize() call to remove the kernel warning during memory allocations. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-mfc: Use WARN_ON(condition) directlySachin Kamat
Use WARN_ON(condition) directly instead of wrapping around an if condition. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5k6aa: Use devm_regulator_bulk_get APISachin Kamat
devm_regulator_bulk_get is device managed and saves some cleanup and exit code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] noon010p30: Remove unneeded v4l2 control compatibility opsSylwester Nawrocki
All host drivers using this subdev driver are already converted to use the control framework so the compatibility ops can be dropped. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-g2d: Add support for G2D H/W Rev.4.1Sachin Kamat
Modified the G2D driver (which initially supported only H/W Rev.3) to support H/W Rev.4.1 present on Exynos4x12 and Exynos52x0 SOCs. - Set the SRC and DST type to 'memory' instead of using reset values. - FIMG2D v4.1 H/W uses different logic for stretching(scaling). - Use CACHECTL_REG only with FIMG2D v3. [s.nawrocki: removed empty line at end of file]] Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-mfc: Use NULL instead of 0 for pointerSachin Kamat
Fixes the following warning: drivers/media/platform/s5p-mfc/s5p_mfc_opr.c:56:27: warning: Using plain integer as NULL pointer Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-fimc: Fix bytesperline value for V4L2_PIX_FMT_YUV420M formatSylwester Nawrocki
Make sure bytesperline for Cb, Cr planes for V4L2_PIX_FMT_YUV420M format is half of the Y plane value, rather than having same bytesperline for all planes. While at it, simplify the bytesperline parameter handling by storing it when image format is set and returning those values when getting the format, instead of recalculating bytesperline from intermediate parameters. Reported-by: Sebastian Dröge <sebastian.droege@collabora.co.uk> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-mfc: Fix a watchdog bugKamil Debski
Fixed wrong condition in firmware reload function used by the watchdog. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] tuner-core: map audmode to STEREO for radio devicesHans Verkuil
Fixes a v4l2-compliance error: setting audmode to a value other than mono or stereo for a radio device should map to MODE_STEREO. The spec specifies that for radio devices only mono and stereo audmodes are valid. If the user specifies another audmode in v4l2_tuner, then that should be mapped to valid audmode. That didn't happen here. Note that tuner drivers might decide to limit the possible audmode even further if it only supports mono. In that case the tuner driver can set audmode to mono. However, that new value wasn't copied back to t->audmode, and that has been fixed as well in this patch. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add driver for OV9650/52 image sensorsSylwester Nawrocki
This patch adds V4L2 sub-device driver for OV9650/OV9652 image sensors. The driver exposes following V4L2 controls: - auto/manual exposure, - auto/manual white balance, - auto/manual gain, - brightness, saturation, sharpness, - horizontal/vertical flip, - color bar test pattern, - banding filter (power line frequency). Frame rate can be configured with g/s_frame_interval pad level ops. Supported resolution are only: SXGA, VGA, QVGA. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add v4l2_ctrl_subdev_log_status() helper functionSylwester Nawrocki
This patch adds a v4l2 core helper function that can be used as the log_status handler for subdevs that only need to log state of the v4l2 controls owned by the subdev's control handler. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add v4l2_ctrl_subdev_subscribe_event() helper functionSylwester Nawrocki
Add a v4l2 core helper function that can be used as the subdev .subscribe_event handler. This allows to eliminate some boilerplate from drivers that are only handling the control events. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add v4l2_event_subdev_unsubscribe() helper functionSylwester Nawrocki
Add a v4l2 core helper function that can be used as the subdev .unsubscribe_event handler. This allows to eliminate some boilerplate from drivers that are only handling the control events. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] v4l2-ctrl: Add helper function for the controls range updateSylwester Nawrocki
This patch adds a helper function that allows to modify range, i.e. minimum, maximum, step and default value of a v4l2 control, after the control has been created and initialized. This is helpful in situations when range of a control depends on user configurable parameters, e.g. camera sensor absolute exposure time depending on an output image resolution and frame rate. v4l2_ctrl_modify_range() function allows to modify range of an INTEGER, BOOL, MENU, INTEGER_MENU and BITMASK type controls. Based on a patch from Hans Verkuil http://patchwork.linuxtv.org/patch/8654. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add header file defining standard image sizesSylwester Nawrocki
Add common header file defining standard image sizes, so we can avoid redefining those in each driver. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] pwc: Don't return EINVAL when an unsupported pixelformat is requestedHans de Goede
Instead chaneg the passed in format to the pwc default pixelformat. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/zc3xx.c: use IS_ENABLED() macroPeter Senna Tschudin
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/xirlink_cit.c: use IS_ENABLED() macroPeter Senna Tschudin
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/t613.c: use IS_ENABLED() macroPeter Senna Tschudin
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/stv06xx/stv06xx.c: use IS_ENABLED() macroPeter Senna Tschudin
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/spca561.c: use IS_ENABLED() macroPeter Senna Tschudin
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-14 10:21:58 +0000