summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-08-28ALSA: emu8000: fix emu8000 DRAM sized 512 KiB too smallDavid Flater
v2: Fixed result still wrong in the case of 512 KiB DRAM. Oops. Applicable to 3.5.3 mainline. In emu8000.c, size_dram determines the amount of memory on the sound card by doing write/readback tests starting at 512 KiB and incrementing by 512 KiB. On success, detected_size is updated to the successful address and testing continues. On failure, the loop is immediately exited. The resulting detected_size is 512 KiB too small except in two special cases: 1. If there is no memory, the initial 0 value of detected_size is used, which is correct. 2. If the address space wraps around, detected_size is updated before the bailout, so the result is correct. The patch corrects all cases and was tested with an AWE64 Gold. Before: EMU8000 [0x620]: 3584 Kb on-board memory detected asfxload 4GMGSMT.SF2 (4174814 B) fails. After: EMU8000 [0x620]: 4096 Kb on-board memory detected asfxload 4GMGSMT.SF2 succeeds. I do not have a card with 512 KiB to test with, but by forcibly enabling the added conditional I verified on the AWE64 Gold that it detects 512 KiB (successfully reading from the first memory location) and does not hang the card. C.f. Bug 46451 https://bugzilla.kernel.org/show_bug.cgi?id=46451 Signed-off-by: David Flater <dave@flaterco.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-28Merge branch 'for-linus' into for-nextTakashi Iwai
Need to merge the fixes regarding EPSS. Conflicts: sound/pci/hda/hda_codec.c
2012-08-28ALSA: hda - Don't trust codec EPSS bit for IDT 92HD83xx & coTakashi Iwai
These codecs seem reporting EPSS but require longer delay for the proper D3 transition. For example, D3_STOP_CLOCK_OK bit won't be set correctly even after D3. In this patch, codec->epss flag is overridden for avoid the misbehavior. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-28ALSA: hda - Avoid unnecessary parameter read for EPSSTakashi Iwai
EPSS parameter should be static, so we can read it once and remember. This also allows more easily to override the wrong EPSS capability reported from a codec by changing the flag in the codec initialization step. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-28ALSA: hda - Make clear built-in driver optimizationTakashi Iwai
Use unsigned int to make clear that the codes required only for modules will be reduced by the compiler optimization. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-27ALSA: pcxhr: Add 8 new sound cardsMarkus Bollinger
add new sound cards VX442HR VX442e PCX442HR PCX442e VX822HR VX822e PCX822HR and PCX822e Signed-off-by: Markus Bollinger <bollinger@digigram.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-24ALSA: cmi8328: Fix build error with CONFIG_GAMEPORT=nTakashi Iwai
sound/isa/cmi8328.c: In function 'snd_cmi8328_remove': sound/isa/cmi8328.c:416:24: error: 'cmi' undeclared (first use in this function) sound/isa/cmi8328.c:416:24: note: each undeclared identifier is reported only once for each function it appears in make[3]: *** [sound/isa/cmi8328.o] Error 1 Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-24ALSA: hda - bug fix on references without checking CONFIG_SND_HDA_POWER_SAVEMengdong Lin
The patch to support runtime PM introduced a bug: Module parameter 'power_save_controller', and the codec flag 'd3_stop_clk' 'd3_stop_clk_ok' are defined only when HDA power save is enabled in config. But there are references to them without checking macro CONFIG_SND_HDA_POWER_SAVE. This patch is to fix the bug. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23ALSA: hda - add runtime PM supportMengdong Lin
Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-22ALSA: hda - Call snd_hda_jack_report_sync() generically in hda_codec.cTakashi Iwai
Instead of calling the jack sync in the init callback of each codec, call it generically at initialization and resume. By calling it at the last of resume sequence, a possible race between the jack sync and the unsol event enablement in the current code will be closed, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-22ALSA: hda - Do not set GPIOs for speakers on IDT if there are no speakersDavid Henningsson
This fixes an issue with a machine where there were no speakers, but GPIO0 had to be data=1 for the headphone to be functioning. I'm not sure if we need a more advanced patch to solve all possible cases, but if so, this patch would still provide a minor optimisation. BugLink: https://bugs.launchpad.net/bugs/1040077 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-21ALSA: introduce snd-cmi8328: C-Media CMI8328 driverOndrej Zary
Introduce snd-cmi8328 driver for C-Media CMI8328-based sound cards, such as AudioExcel AV500. It supports PCM playback and capture (full-duplex) through wss_lib, gameport, OPL3 and MPU401. The AV500 card has onboard Dream wavetable synth connected to the MPU401 port and Aux 1 input internally which works too. The CDROM interface is not supported (as the drivers for these CDROMs were removed from the kernel some time ago). A separate driver is needed because CMI8328 is completely different chip to CMI8329/CMI8330. It's configured by magic registers (there's no PnP). Sound is provided by a real WSS codec (CS4231A) and the SB part is just a SB Pro emulation (for DOS games, useless for Linux). When SB is enabled, the CMI8328 chip disables access to the WSS codec, emulates SoundBlaster on one side and outputs sound data to the codec - so SB and WSS can't work together with this card. The WSS codec can do full duplex by itself so there's no need for crazy things like snd-cmi8330 does (combining SB and WSS parts into one driver). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-21ALSA: snd-als100: fix suspend/resumeOndrej Zary
snd_card_als100_probe() does not set pcm field in struct snd_sb. As a result, PCM is not suspended and applications don't know that they need to resume the playback. Tested with Labway A381-F20 card (ALS120). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20Merge branch 'for-linus' into for-nextTakashi Iwai
Conflicts: sound/pci/hda/hda_codec.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: hda - Fix leftover codec->power_transitionTakashi Iwai
When the codec turn-on operation is canceled by the immediate power-on, the driver left the power_transition flag as is. This caused the persistent avoidance of power-save behavior. Cc: <stable@vger.kernel.org> [v3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20Merge tag 'asoc-3.6' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Additional updates for 3.6 A batch more bugfixes, all driver-specific and fairly small and unremarkable in a global context. The biggest batch are for the newly added Arizona drivers.
2012-08-20ALSA: hda - Add missing ifdef CONFIG_SND_HDA_POWER_SAVE to tracepointsTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: lto, sound: Fix export symbols for !CONFIG_MODULESAndi Kleen
The new LTO EXPORT_SYMBOL references symbols even without CONFIG_MODULES. Since these functions are macros in this case this doesn't work. Add a ifdef to fix the build. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: hda - Check the power state when power_save option is changedTakashi Iwai
... by calling the newly introduced snd_hda_power_sync(). I had to reimplement a wheel for adding the trigger at changing the parameter -- the parameter set ops is overwritten to pass the integer parameter, then trigger the power-state sync. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: hda - Implement snd_hda_power_sync() helper functionTakashi Iwai
Added a new helper function snd_hda_power_sync() to trigger the power-saving manually. It's an inline function call to snd_hda_power_save() helper function. Together with this addition, snd_hda_power_up*() and snd_hda_power_down() functions are inlined to a call of the same snd_hda_power_save() helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20Merge branch 'topic/ca0132-fix' into for-linusTakashi Iwai
This is a series of fixes for CA0132, especially the missing SPDIF I/O and the mixer build errors.
2012-08-20ALSA: hda - don't create dysfunctional mixer controls for ca0132David Henningsson
It's possible that these amps are settable somehow, e g through secret codec verbs, but for now, don't create the controls (as they won't be working anyway, and cause errors in amixer). Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1038651 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: hda - Add tracepoints at snd_hda_power_up/down entrances.Takashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: snd-ad1816a: Implement suspend/resumeOndrej Zary
Implement suspend/resume support for AD1816 chips. Tested with Terratec SoundSystem Base-1. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: snd-ad1816a: remove useless struct snd_card_ad1816aOndrej Zary
struct snd_card_ad1816a is only set but the values are never used then. Removing it allows struct snd_card's private_data to be used for struct snd_ad1816a, simplifying the code. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: sound/ppc/snd_ps3.c: fix error return codeJulia Lawall
Initialize ret before returning on failure, as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: sound/pci/rme9652/hdspm.c: fix error return codeJulia Lawall
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: sound/pci/sis7019.c: fix error return codeJulia Lawall
Initialize rc before returning on failure, as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: sound/pci/ctxfi/ctatc.c: fix error return codeJulia Lawall
Initialize err before returning on failure, as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: sound/atmel/ac97c.c: fix error return codeJulia Lawall
In the first case, the second test of whether retval is negative is redundant. It is dropped and the previous and subsequent tests are combined. In the second case, add an initialization of retval on failure of ioremap. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: sound/atmel/abdac.c: fix error return codeJulia Lawall
Initialize retval before returning from a failed call to ioremap. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20ALSA: fix pcm.h kernel-doc warning and notationRandy Dunlap
Fix kernel-doc warning in <sound/pcm.h> and add function name to make the kernel-doc notation complete. Warning(include/sound/pcm.h:1081): No description found for parameter 'substream' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20sound: oss/sb_audio: prevent divide by zero bugDan Carpenter
Speed comes from get_user() in audio_ioctl(). We use it to set the "s" variable before clamping it to valid values so it could lead to a divide by zero bug. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-17ASoC: wm9712: Fix inverted capture volumeMark Brown
The capture volume increases with the register value so it shouldn't be flagged as inverted. Reported-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-17ASoC: wm9712: Fix microphone source selectionMark Brown
Currently the microphone input source is not selectable as while there is a DAPM widget it's not connected to anything so it won't be properly instantiated. Add something more correct for the input structure to get things going, even though it's not hooked into the rest of the routing map and so won't actually achieve anything except allowing the relevant register bits to be written. Reported-by: Christop Fritz <chf.fritz@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-08-17ASoC: wm5102: Remove DRC2Mark Brown
It will be removed from future device revisions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-16ALSA: hda - Don't send invalid volume knob command on IDT 92hd75bxxDavid Henningsson
Instead of blindly initializing a volume knob widget, first check that there actually is a volume knob widget. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-16ALSA: usb-audio: Fix scheduling-while-atomic bug in PCM capture streamTakashi Iwai
A PCM capture stream on usb-audio causes a scheduling-while-atomic BUG, as reported in the bugzilla entry below. It's because snd_usb_endpoint_start() is called at first at trigger START for a capture stream, and this function contains the left-over EP deactivation codes. The problem doesn't happen for a playback stream because the function is called at PCM prepare time, which can sleep. This patch fixes the BUG by moving the EP deactivation code into the PCM prepare callback. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46011 Cc: <stable@vger.kernel.org> [v3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-15ALSA: hda - Add 3stack-automute model to AD1882 codecTakashi Iwai
Added a simple support of automute for the front HP jack to AD1882 stack model. Such an addition is basically an exception -- we really want to avoid the static quirk codes, but AD1882 parser isn't still ready for moving to the BIOS auto-parser yet. So, as a quick fix, I merged it for now. In near future, we really need the big clean up of patch_analog.c to move on to the auto-parser... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-14ALSA: PCI: Replace CONFIG_PM with CONFIG_PM_SLEEPTakashi Iwai
Otherwise we may get compile warnings due to unused functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-14ALSA: hda - Fix possible compile warnings regarding CONFIG_PMTakashi Iwai
Replace with a proper ifdef check of CONFIG_PM_SLEEP in hda_intel.c. But other places in HD-audio driver are still marked with CONFIG_PM, since these can be called for power-saving even without CONFIG_PM_SLEEP. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-14ALSA: lx6464es: Add a missing error checkTakashi Iwai
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44541 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-14ALSA: hda - Fix 'Beep Playback Switch' with no underlying mute switchDavid Henningsson
Some Conexant devices (e g CX20590) have no mute capability on their Beep widgets. This patch makes sure we don't try setting mutes on those widgets. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-13ASoC: jack: Always notify full jack statusMark Brown
Don't just notify for the bits we've updated, notify the full state of the jack otherwise users might get confused by misleading reports. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-13ASoC: wm5110: Add missing input PGA routesMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-13ASoC: wm5102: Add missing input PGA routesMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-13ALSA: hda - fix Copyright debug messageWang Xingchao
As spec said, 1 indicates no copyright is asserted. Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-13ALSA: hda - show ICT/KAE control bitsWang Xingchao
Enable two debug options for S/PDIF Converter Control. KAE: Keep Alive Enable; ICT: IEC Coding Type. Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-10ASoC: Samsung: Fix build errorSachin Kamat
Fixes the following build error: In file included from arch/arm/mach-exynos/include/mach/dma.h:24:0, from arch/arm/plat-samsung/include/plat/dma-ops.h:17, from arch/arm/plat-samsung/include/plat/dma.h:128, from sound/soc/samsung/pcm.c:23: arch/arm/plat-samsung/include/plat/dma-pl330.h:106:8: error: redefinition of ‘struct s3c2410_dma_client’ arch/arm/plat-samsung/include/plat/dma.h:40:8: note: originally defined here make[3]: *** [sound/soc/samsung/pcm.o] Error 1 Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-10ALSA : hda - bug fix on checking the supported power states of a codecMengdong Lin
The return value of snd_hda_param_read() is -1 for an error, otherwise it's the supported power states of a codec. The supported power states is a 32-bit value. Bit 31 will be set to 1 if the codec supports EPSS, thus making "sup" negative. And the bit 28:5 is reserved as "0". So a negative value other than -1 shall be further checked. Please refer to High-Definition spec 7.3.4.12 "Supported Power States", thanks! Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-06 21:31:47 +0000