summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-09-15Merge branch 'i2c/for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "I2C has two more new drivers: Altera FPGA and STM32F7" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-stm32f7: add driver i2c: i2c-stm32f4: use generic definition of speed enum dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings i2c: altera: Add Altera I2C Controller driver dt-bindings: i2c: Add Altera I2C Controller
2017-09-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull more KVM updates from Paolo Bonzini: - PPC bugfixes - RCU splat fix - swait races fix - pointless userspace-triggerable BUG() fix - misc fixes for KVM_RUN corner cases - nested virt correctness fixes + one host DoS - some cleanups - clang build fix - fix AMD AVIC with default QEMU command line options - x86 bugfixes * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly kvm: vmx: Handle VMLAUNCH/VMRESUME failure properly kvm: nVMX: Remove nested_vmx_succeed after successful VM-entry kvm,mips: Fix potential swait_active() races kvm,powerpc: Serialize wq active checks in ops->vcpu_kick kvm: Serialize wq active checks in kvm_vcpu_wake_up() kvm,x86: Fix apf_task_wake_one() wq serialization kvm,lapic: Justify use of swait_active() kvm,async_pf: Use swq_has_sleeper() sched/wait: Add swq_has_sleeper() KVM: VMX: Do not BUG() on out-of-bounds guest IRQ KVM: Don't accept obviously wrong gsi values via KVM_IRQFD kvm: nVMX: Don't allow L2 to access the hardware CR8 KVM: trace events: update list of exit reasons KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously KVM: X86: Don't block vCPU if there is pending exception KVM: SVM: Add irqchip_split() checks before enabling AVIC KVM: Add struct kvm_vcpu pointer parameter to get_enable_apicv() KVM: SVM: Refactor AVIC vcpu initialization into avic_init_vcpu() KVM: x86: fix clang build ...
2017-09-15bpf/verifier: reject BPF_ALU64|BPF_ENDEdward Cree
Neither ___bpf_prog_run nor the JITs accept it. Also adds a new test case. Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15sctp: do not mark sk dumped when inet_sctp_diag_fill returns errXin Long
sctp_diag would not actually dump out sk/asoc if inet_sctp_diag_fill returns err, in which case it shouldn't mark sk dumped by setting cb->args[3] as 1 in sctp_sock_dump(). Otherwise, it could cause some asocs to have no parent's sk dumped in 'ss --sctp'. So this patch is to not set cb->args[3] when inet_sctp_diag_fill() returns err in sctp_sock_dump(). Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15sctp: fix an use-after-free issue in sctp_sock_dumpXin Long
Commit 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") tried to fix an use-after-free issue by checking !sctp_sk(sk)->ep with holding sock and sock lock. But Paolo noticed that endpoint could be destroyed in sctp_rcv without sock lock protection. It means the use-after-free issue still could be triggered when sctp_rcv put and destroy ep after sctp_sock_dump checks !ep, although it's pretty hard to reproduce. I could reproduce it by mdelay in sctp_rcv while msleep in sctp_close and sctp_sock_dump long time. This patch is to add another param cb_done to sctp_for_each_transport and dump ep->assocs with holding tsp after jumping out of transport's traversal in it to avoid this issue. It can also improve sctp diag dump to make it run faster, as no need to save sk into cb->args[5] and keep calling sctp_for_each_transport any more. This patch is also to use int * instead of int for the pos argument in sctp_for_each_transport, which could make postion increment only in sctp_for_each_transport and no need to keep changing cb->args[2] in sctp_sock_filter and sctp_sock_dump any more. Fixes: 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15netvsc: increase default receive buffer sizeStephen Hemminger
The default receive buffer size was reduced by recent change to a value which was appropriate for 10G and Windows Server 2016. But the value is too small for full performance with 40G on Azure. Increase the default back to maximum supported by host. Fixes: 8b5327975ae1 ("netvsc: allow controlling send/recv buffer size") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15tcp: update skb->skb_mstamp more carefullyEric Dumazet
liujian reported a problem in TCP_USER_TIMEOUT processing with a patch in tcp_probe_timer() : https://www.spinics.net/lists/netdev/msg454496.html After investigations, the root cause of the problem is that we update skb->skb_mstamp of skbs in write queue, even if the attempt to send a clone or copy of it failed. One reason being a routing problem. This patch prevents this, solving liujian issue. It also removes a potential RTT miscalculation, since __tcp_retransmit_skb() is not OR-ing TCP_SKB_CB(skb)->sacked with TCPCB_EVER_RETRANS if a failure happens, but skb->skb_mstamp has been changed. A future ACK would then lead to a very small RTT sample and min_rtt would then be lowered to this too small value. Tested: # cat user_timeout.pkt --local_ip=192.168.102.64 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 `ifconfig tun0 192.168.102.64/16; ip ro add 192.0.2.1 dev tun0` +0 < S 0:0(0) win 0 <mss 1460> +0 > S. 0:0(0) ack 1 <mss 1460> +.1 < . 1:1(0) ack 1 win 65530 +0 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_USER_TIMEOUT, [3000], 4) = 0 +0 write(4, ..., 24) = 24 +0 > P. 1:25(24) ack 1 win 29200 +.1 < . 1:1(0) ack 25 win 65530 //change the ipaddress +1 `ifconfig tun0 192.168.0.10/16` +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +0 `ifconfig tun0 192.168.102.64/16` +0 < . 1:2(1) ack 25 win 65530 +0 `ifconfig tun0 192.168.0.10/16` +3 write(4, ..., 24) = -1 # ./packetdrill user_timeout.pkt Signed-off-by: Eric Dumazet <edumazet@googl.com> Reported-by: liujian <liujian56@huawei.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15net: ipv4: fix l3slave check for index returned in IP_PKTINFODavid Ahern
rt_iif is only set to the actual egress device for the output path. The recent change to consider the l3slave flag when returning IP_PKTINFO works for local traffic (the correct device index is returned), but it broke the more typical use case of packets received from a remote host always returning the VRF index rather than the original ingress device. Update the fixup to consider l3slave and rt_iif actually getting set. Fixes: 1dfa76390bf05 ("net: ipv4: add check for l3slave for index returned in IP_PKTINFO") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15net: smsc911x: Quieten netif during suspendGeert Uytterhoeven
If the network interface is kept running during suspend, the net core may call net_device_ops.ndo_start_xmit() while the Ethernet device is still suspended, which may lead to a system crash. E.g. on sh73a0/kzm9g and r8a73a4/ape6evm, the external Ethernet chip is driven by a PM controlled clock. If the Ethernet registers are accessed while the clock is not running, the system will crash with an imprecise external abort. As this is a race condition with a small time window, it is not so easy to trigger at will. Using pm_test may increase your chances: # echo 0 > /sys/module/printk/parameters/console_suspend # echo platform > /sys/power/pm_test # echo mem > /sys/power/state To fix this, make sure the network interface is quietened during suspend. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15net: systemport: Fix 64-bit stats deadlockFlorian Fainelli
We can enter a deadlock situation because there is no sufficient protection when ndo_get_stats64() runs in process context to guard against RX or TX NAPI contexts running in softirq, this can lead to the following lockdep splat and actual deadlock was experienced as well with an iperf session in the background and a while loop doing ifconfig + ethtool. [ 5.780350] ================================ [ 5.784679] WARNING: inconsistent lock state [ 5.789011] 4.13.0-rc7-02179-g32fae27c725d #70 Not tainted [ 5.794561] -------------------------------- [ 5.798890] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 5.804971] swapper/0/0 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 5.810175] (&syncp->seq#2){+.?...}, at: [<c0768a28>] bcm_sysport_tx_reclaim+0x30/0x54 [ 5.818327] {SOFTIRQ-ON-W} state was registered at: [ 5.823278] bcm_sysport_get_stats64+0x17c/0x258 [ 5.828053] dev_get_stats+0x38/0xac [ 5.831776] rtnl_fill_stats+0x30/0x118 [ 5.835761] rtnl_fill_ifinfo+0x538/0xe24 [ 5.839921] rtmsg_ifinfo_build_skb+0x6c/0xd8 [ 5.844430] rtmsg_ifinfo_event.part.5+0x14/0x44 [ 5.849201] rtmsg_ifinfo+0x20/0x28 [ 5.852837] register_netdevice+0x628/0x6b8 [ 5.857171] register_netdev+0x14/0x24 [ 5.861051] bcm_sysport_probe+0x30c/0x438 [ 5.865280] platform_drv_probe+0x50/0xb0 [ 5.869418] driver_probe_device+0x2e8/0x450 [ 5.873817] __driver_attach+0x104/0x120 [ 5.877871] bus_for_each_dev+0x7c/0xc0 [ 5.881834] bus_add_driver+0x1b0/0x270 [ 5.885797] driver_register+0x78/0xf4 [ 5.889675] do_one_initcall+0x54/0x190 [ 5.893646] kernel_init_freeable+0x144/0x1d0 [ 5.898135] kernel_init+0x8/0x110 [ 5.901665] ret_from_fork+0x14/0x2c [ 5.905363] irq event stamp: 24263 [ 5.908804] hardirqs last enabled at (24262): [<c08eecf0>] net_rx_action+0xc4/0x4e4 [ 5.916624] hardirqs last disabled at (24263): [<c0a7da00>] _raw_spin_lock_irqsave+0x1c/0x98 [ 5.925143] softirqs last enabled at (24258): [<c022a7fc>] irq_enter+0x84/0x98 [ 5.932524] softirqs last disabled at (24259): [<c022a918>] irq_exit+0x108/0x16c [ 5.939985] [ 5.939985] other info that might help us debug this: [ 5.946576] Possible unsafe locking scenario: [ 5.946576] [ 5.952556] CPU0 [ 5.955031] ---- [ 5.957506] lock(&syncp->seq#2); [ 5.960955] <Interrupt> [ 5.963604] lock(&syncp->seq#2); [ 5.967227] [ 5.967227] *** DEADLOCK *** [ 5.967227] [ 5.973222] 1 lock held by swapper/0/0: [ 5.977092] #0: (&(&ring->lock)->rlock){..-...}, at: [<c0768a18>] bcm_sysport_tx_reclaim+0x20/0x54 So just remove the u64_stats_update_begin()/end() pair in ndo_get_stats64() since it does not appear to be useful for anything. No inconsistency was observed with either ifconfig or ethtool, global TX counts equal the sum of per-queue TX counts on a 32-bit architecture. Fixes: 10377ba7673d ("net: systemport: Support 64bit statistics") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15net: vrf: avoid gcc-4.6 warningArnd Bergmann
When building an allmodconfig kernel with gcc-4.6, we get a rather odd warning: drivers/net/vrf.c: In function ‘vrf_ip6_input_dst’: drivers/net/vrf.c:964:3: error: initialized field with side-effects overwritten [-Werror] drivers/net/vrf.c:964:3: error: (near initialization for ‘fl6’) [-Werror] I have no idea what this warning is even trying to say, but it does seem like a false positive. Reordering the initialization in to match the structure definition gets rid of the warning, and might also avoid whatever gcc thinks is wrong here. Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15qed: remove unnecessary call to memsetHimanshu Jha
call to memset to assign 0 value immediately after allocating memory with kzalloc is unnecesaary as kzalloc allocates the memory filled with 0 value. Semantic patch used to resolve this issue: @@ expression e,e2; constant c; statement S; @@ e = kzalloc(e2, c); if(e == NULL) S - memset(e, 0, e2); Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Acked-by: Sudarsana Kalluru <sudarsana.kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15Merge tag 'firmware_removal-4.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull firmware removal from Greg KH: "Many many years ago (at the kernel summit in Boston), we all came to the agreement that the firmware/ tree should be dropped from the kernel, and everyone use the linux-firmware package instead. For some minor reason, David Woodhouse didn't send the pull request at that point in time, and everyone forgot about this. The topic came up in the hallway track at the Plumbers conference this week, so here's a single patch that drops the whole firmware tree. The last firmware update was back in 2013, and all distros have been using linux-firmware instead since at least that year, if not before. The only commits to that directory since 2013 was some kbuild fixups for various build tool issues. So lets finally drop this, we don't need to lug them around in the kernel source tree anymore, especially as no one wants or uses them. This has passed build testing with 0-day, I don't think it made it into linux-next this week, but I figured it was good to get in before 4.14-rc1 was out" * tag 'firmware_removal-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware: delete in-kernel firmware
2017-09-15Merge tag 'nios2-v4.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 Pull arch/nios2 update from Ley Foon Tan. * tag 'nios2-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: time: Read timer in get_cycles only if initialized nios2: add earlycon support to 3c120 devboard DTS
2017-09-15Merge tag 'powerpc-4.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "Just one fix, for the handling of alignment interrupts on dcbz instructions. Thanks to Paul Mackerras, Christian Zigotzky, Michal Sojka" * tag 'powerpc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Fix handling of alignment interrupt on dcbz instruction
2017-09-15Merge tag 'for-linus-4.14-ofs2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux Pull orangefs updates from Mike Marshall: "Some cleanups and a big bug fix for ACLs. When I was reviewing Jan Kara's ACL patch, I realized that Orangefs ACL code was busted, not just in the kernel module, but in the server as well. I've been working on the code in the server mostly, but here's one kernel patch, there will be more" * tag 'for-linus-4.14-ofs2' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: Adjust three checks for null pointers orangefs: Use kcalloc() in orangefs_prepare_cdm_array() orangefs: Delete error messages for a failed memory allocation in five functions orangefs: constify xattr_handler structure orangefs: don't call filemap_write_and_wait from fsync orangefs: off by ones in xattr size checks orangefs: documentation clean up orangefs: react properly to posix_acl_update_mode's aftermath. orangefs: Don't clear SGID when inheriting ACLs
2017-09-15Merge branch 'next' into for-linusDmitry Torokhov
Prepare second round of input updates for 4.14 merge window.
2017-09-15Input: i8042 - add Gigabyte P57 to the keyboard reset tableKai-Heng Feng
Similar to other Gigabyte laptops, the touchpad on P57 requires a keyboard reset to detect Elantech touchpad correctly. BugLink: https://bugs.launchpad.net/bugs/1594214 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-15kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properlyJim Mattson
When emulating a nested VM-entry from L1 to L2, several control field validation checks are deferred to the hardware. Should one of these validation checks fail, vcpu_vmx_run will set the vmx->fail flag. When this happens, the L2 guest state is not loaded (even in part), and execution should continue in L1 with the next instruction after the VMLAUNCH/VMRESUME. The VMCS12 is not modified (except for the VM-instruction error field), the VMCS12 MSR save/load lists are not processed, and the CPU state is not loaded from the VMCS12 host area. Moreover, the vmcs02 exit reason is stale, so it should not be consulted for any reason. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-15kvm: vmx: Handle VMLAUNCH/VMRESUME failure properlyJim Mattson
On an early VMLAUNCH/VMRESUME failure (i.e. one which sets the VM-instruction error field of the current VMCS), the launch state of the current VMCS is not set to "launched," and the VM-exit information fields of the current VMCS (including IDT-vectoring information and exit reason) are stale. On a late VMLAUNCH/VMRESUME failure (i.e. one which sets the high bit of the exit reason field), the launch state of the current VMCS is not set to "launched," and only two of the VM-exit information fields of the current VMCS are modified (exit reason and exit qualification). The remaining VM-exit information fields of the current VMCS (including IDT-vectoring information, in particular) are stale. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-15kvm: nVMX: Remove nested_vmx_succeed after successful VM-entryJim Mattson
After a successful VM-entry, RFLAGS is cleared, with the exception of bit 1, which is always set. This is handled by load_vmcs12_host_state. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-15kvm,mips: Fix potential swait_active() racesDavidlohr Bueso
For example, the following could occur, making us miss a wakeup: CPU0 CPU1 kvm_vcpu_block kvm_mips_comparecount_func [L] swait_active(&vcpu->wq) [S] prepare_to_swait(&vcpu->wq) [L] if (!kvm_vcpu_has_pending_timer(vcpu)) schedule() [S] queue_timer_int(vcpu) Ensure that the swait_active() check is not hoisted over the interrupt. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-15kvm,powerpc: Serialize wq active checks in ops->vcpu_kickDavidlohr Bueso
Particularly because kvmppc_fast_vcpu_kick_hv() is a callback, ensure that we properly serialize wq active checks in order to avoid potentially missing a wakeup due to racing with the waiter side. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-15kvm: Serialize wq active checks in kvm_vcpu_wake_up()Davidlohr Bueso
This is a generic call and can be suceptible to races in reading the wq task_list while another task is adding itself to the list. Add a full barrier by using the swq_has_sleeper() helper. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-15kvm,x86: Fix apf_task_wake_one() wq serializationDavidlohr Bueso
During code inspection, the following potential race was seen: CPU0 CPU1 kvm_async_pf_task_wait apf_task_wake_one [L] swait_active(&n->wq) [S] prepare_to_swait(&n.wq) [L] if (!hlist_unhahed(&n.link)) schedule() [S] hlist_del_init(&n->link); Properly serialize swait_active() checks such that a wakeup is not missed. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-15kvm,lapic: Justify use of swait_active()Davidlohr Bueso
A comment might serve future readers. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-15kvm,async_pf: Use swq_has_sleeper()Davidlohr Bueso
... as we've got the new helper now. This caller already does the right thing, hence no changes in semantics. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-15sched/wait: Add swq_has_sleeper()Davidlohr Bueso
Which is the equivalent of what we have in regular waitqueues. I'm not crazy about the name, but this also helps us get both apis closer -- which iirc comes originally from the -net folks. We also duplicate the comments for the lockless swait_active(), from wait.h. Future users will make use of this interface. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-15KVM: VMX: Do not BUG() on out-of-bounds guest IRQJan H. Schönherr
The value of the guest_irq argument to vmx_update_pi_irte() is ultimately coming from a KVM_IRQFD API call. Do not BUG() in vmx_update_pi_irte() if the value is out-of bounds. (Especially, since KVM as a whole seems to hang after that.) Instead, print a message only once if we find that we don't have a route for a certain IRQ (which can be out-of-bounds or within the array). This fixes CVE-2017-1000252. Fixes: efc644048ecde54 ("KVM: x86: Update IRTE for posted-interrupts") Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-15KVM: Don't accept obviously wrong gsi values via KVM_IRQFDJan H. Schönherr
We cannot add routes for gsi values >= KVM_MAX_IRQ_ROUTES -- see kvm_set_irq_routing(). Hence, there is no sense in accepting them via KVM_IRQFD. Prevent them from entering the system in the first place. Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-15nios2: time: Read timer in get_cycles only if initializedGuenter Roeck
Mainline crashes as follows when running nios2 images. On node 0 totalpages: 65536 free_area_init_node: node 0, pgdat c8408fa0, node_mem_map c8726000 Normal zone: 512 pages used for memmap Normal zone: 0 pages reserved Normal zone: 65536 pages, LIFO batch:15 Unable to handle kernel NULL pointer dereference at virtual address 00000000 ea = c8003cb0, ra = c81cbf40, cause = 15 Kernel panic - not syncing: Oops Problem is seen because get_cycles() is called before the timer it depends on is initialized. Returning 0 in that situation fixes the problem. Fixes: 33d72f3822d7 ("init/main.c: extract early boot entropy from the ..") Cc: Laura Abbott <labbott@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-09-15nios2: add earlycon support to 3c120 devboard DTSTobias Klauser
Allow earlycon to be used on the JTAG UART present in the 3c120 GHRD. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2017-09-15kvm: nVMX: Don't allow L2 to access the hardware CR8Jim Mattson
If L1 does not specify the "use TPR shadow" VM-execution control in vmcs12, then L0 must specify the "CR8-load exiting" and "CR8-store exiting" VM-execution controls in vmcs02. Failure to do so will give the L2 VM unrestricted read/write access to the hardware CR8. This fixes CVE-2017-12154. Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-15Revert "PCI: Avoid race while enabling upstream bridges"Bjorn Helgaas
This reverts commit 40f11adc7cd9281227f0a6a627d966dd0a5f0cd9. Jens found that iwlwifi firmware loading failed on a Lenovo X1 Carbon, gen4: iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-34.ucode failed with error -2 iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-33.ucode failed with error -2 iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-32.ucode failed with error -2 iwlwifi 0000:04:00.0: loaded firmware version 31.532993.0 op_mode iwlmvm iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208 ... iwlwifi 0000:04:00.0: Failed to load firmware chunk! iwlwifi 0000:04:00.0: Could not load the [0] uCode section iwlwifi 0000:04:00.0: Failed to start INIT ucode: -110 iwlwifi 0000:04:00.0: Failed to run INIT ucode: -110 He bisected it to 40f11adc7cd9 ("PCI: Avoid race while enabling upstream bridges"). Revert that commit to fix the regression. Link: http://lkml.kernel.org/r/4bcbcbc1-7c79-09f0-5071-bc2f53bf6574@kernel.dk Fixes: 40f11adc7cd9 ("PCI: Avoid race while enabling upstream bridges") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Srinath Mannam <srinath.mannam@broadcom.com> CC: Jens Axboe <axboe@kernel.dk> CC: Luca Coelho <luca@coelho.fi> CC: Johannes Berg <johannes@sipsolutions.net> CC: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2017-09-14vfs: constify path argument to kernel_read_file_from_pathMimi Zohar
This patch constifies the path argument to kernel_read_file_from_path(). Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-14Merge tag 'nfs-for-4.14-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull more NFS client updates from Trond Myklebust: "Hightlights include: Bugfixes: - Various changes relating to reporting IO errors. - pnfs: Use the standard I/O stateid when calling LAYOUTGET Features: - Add static NFS I/O tracepoints for debugging" * tag 'nfs-for-4.14-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: various changes relating to reporting IO errors. NFS: Add static NFS I/O tracepoints pNFS: Use the standard I/O stateid when calling LAYOUTGET
2017-09-14Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc leftovers from Al Viro. * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix the __user misannotations in asm-generic get_user/put_user fput: Don't reinvent the wheel but use existing llist API namespace.c: Don't reinvent the wheel but use existing llist API
2017-09-14Merge branch 'work.read_write' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull nowait read support from Al Viro: "Support IOCB_NOWAIT for buffered reads and block devices" * 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: block_dev: support RFW_NOWAIT on block device nodes fs: support RWF_NOWAIT for buffered reads fs: support IOCB_NOWAIT in generic_file_buffered_read fs: pass iocb to do_generic_file_read
2017-09-14Merge branch 'work.mount' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull mount flag updates from Al Viro: "Another chunk of fmount preparations from dhowells; only trivial conflicts for that part. It separates MS_... bits (very grotty mount(2) ABI) from the struct super_block ->s_flags (kernel-internal, only a small subset of MS_... stuff). This does *not* convert the filesystems to new constants; only the infrastructure is done here. The next step in that series is where the conflicts would be; that's the conversion of filesystems. It's purely mechanical and it's better done after the merge, so if you could run something like list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$') sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \ -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \ -e 's/\<MS_NODEV\>/SB_NODEV/g' \ -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \ -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \ -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \ -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \ -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \ -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \ -e 's/\<MS_SILENT\>/SB_SILENT/g' \ -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \ -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \ -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \ -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \ $list and commit it with something along the lines of 'convert filesystems away from use of MS_... constants' as commit message, it would save a quite a bit of headache next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Differentiate mount flags (MS_*) from internal superblock flags VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb) vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-09-14Merge branch 'work.set_fs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more set_fs removal from Al Viro: "Christoph's 'use kernel_read and friends rather than open-coding set_fs()' series" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: unexport vfs_readv and vfs_writev fs: unexport vfs_read and vfs_write fs: unexport __vfs_read/__vfs_write lustre: switch to kernel_write gadget/f_mass_storage: stop messing with the address limit mconsole: switch to kernel_read btrfs: switch write_buf to kernel_write net/9p: switch p9_fd_read to kernel_write mm/nommu: switch do_mmap_private to kernel_read serial2002: switch serial2002_tty_write to kernel_{read/write} fs: make the buf argument to __kernel_write a void pointer fs: fix kernel_write prototype fs: fix kernel_read prototype fs: move kernel_read to fs/read_write.c fs: move kernel_write to fs/read_write.c autofs4: switch autofs4_write to __kernel_write ashmem: switch to ->read_iter
2017-09-14Merge branch 'work.ipc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull ipc compat cleanup and 64-bit time_t from Al Viro: "IPC copyin/copyout sanitizing, including 64bit time_t work from Deepa Dinamani" * 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: utimes: Make utimes y2038 safe ipc: shm: Make shmid_kernel timestamps y2038 safe ipc: sem: Make sem_array timestamps y2038 safe ipc: msg: Make msg_queue timestamps y2038 safe ipc: mqueue: Replace timespec with timespec64 ipc: Make sys_semtimedop() y2038 safe get rid of SYSVIPC_COMPAT on ia64 semtimedop(): move compat to native shmat(2): move compat to native msgrcv(2), msgsnd(2): move compat to native ipc(2): move compat to native ipc: make use of compat ipc_perm helpers semctl(): move compat to native semctl(): separate all layout-dependent copyin/copyout msgctl(): move compat to native msgctl(): split the actual work from copyin/copyout ipc: move compat shmctl to native shmctl: split the work from copyin/copyout
2017-09-14Merge branch 'zstd-minimal' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull zstd support from Chris Mason: "Nick Terrell's patch series to add zstd support to the kernel has been floating around for a while. After talking with Dave Sterba, Herbert and Phillip, we decided to send the whole thing in as one pull request. zstd is a big win in speed over zlib and in compression ratio over lzo, and the compression team here at FB has gotten great results using it in production. Nick will continue to update the kernel side with new improvements from the open source zstd userland code. Nick has a number of benchmarks for the main zstd code in his lib/zstd commit: I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM. The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor, 16 GB of RAM, and a SSD. I benchmarked using `silesia.tar` [3], which is 211,988,480 B large. Run the following commands for the benchmark: sudo modprobe zstd_compress_test sudo mknod zstd_compress_test c 245 0 sudo cp silesia.tar zstd_compress_test The time is reported by the time of the userland `cp`. The MB/s is computed with 1,536,217,008 B / time(buffer size, hash) which includes the time to copy from userland. The Adjusted MB/s is computed with 1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)). The memory reported is the amount of memory the compressor requests. | Method | Size (B) | Time (s) | Ratio | MB/s | Adj MB/s | Mem (MB) | |----------|----------|----------|-------|---------|----------|----------| | none | 11988480 | 0.100 | 1 | 2119.88 | - | - | | zstd -1 | 73645762 | 1.044 | 2.878 | 203.05 | 224.56 | 1.23 | | zstd -3 | 66988878 | 1.761 | 3.165 | 120.38 | 127.63 | 2.47 | | zstd -5 | 65001259 | 2.563 | 3.261 | 82.71 | 86.07 | 2.86 | | zstd -10 | 60165346 | 13.242 | 3.523 | 16.01 | 16.13 | 13.22 | | zstd -15 | 58009756 | 47.601 | 3.654 | 4.45 | 4.46 | 21.61 | | zstd -19 | 54014593 | 102.835 | 3.925 | 2.06 | 2.06 | 60.15 | | zlib -1 | 77260026 | 2.895 | 2.744 | 73.23 | 75.85 | 0.27 | | zlib -3 | 72972206 | 4.116 | 2.905 | 51.50 | 52.79 | 0.27 | | zlib -6 | 68190360 | 9.633 | 3.109 | 22.01 | 22.24 | 0.27 | | zlib -9 | 67613382 | 22.554 | 3.135 | 9.40 | 9.44 | 0.27 | I benchmarked zstd decompression using the same method on the same machine. The benchmark file is located in the upstream zstd repo under `contrib/linux-kernel/zstd_decompress_test.c` [4]. The memory reported is the amount of memory required to decompress data compressed with the given compression level. If you know the maximum size of your input, you can reduce the memory usage of decompression irrespective of the compression level. | Method | Time (s) | MB/s | Adjusted MB/s | Memory (MB) | |----------|----------|---------|---------------|-------------| | none | 0.025 | 8479.54 | - | - | | zstd -1 | 0.358 | 592.15 | 636.60 | 0.84 | | zstd -3 | 0.396 | 535.32 | 571.40 | 1.46 | | zstd -5 | 0.396 | 535.32 | 571.40 | 1.46 | | zstd -10 | 0.374 | 566.81 | 607.42 | 2.51 | | zstd -15 | 0.379 | 559.34 | 598.84 | 4.61 | | zstd -19 | 0.412 | 514.54 | 547.77 | 8.80 | | zlib -1 | 0.940 | 225.52 | 231.68 | 0.04 | | zlib -3 | 0.883 | 240.08 | 247.07 | 0.04 | | zlib -6 | 0.844 | 251.17 | 258.84 | 0.04 | | zlib -9 | 0.837 | 253.27 | 287.64 | 0.04 | I ran a long series of tests and benchmarks on the btrfs side and the gains are very similar to the core benchmarks Nick ran" * 'zstd-minimal' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: squashfs: Add zstd support btrfs: Add zstd support lib: Add zstd modules lib: Add xxhash module
2017-09-15powerpc: Fix handling of alignment interrupt on dcbz instructionPaul Mackerras
This fixes the emulation of the dcbz instruction in the alignment interrupt handler. The error was that we were comparing just the instruction type field of op.type rather than the whole thing, and therefore the comparison "type != CACHEOP + DCBZ" was always true. Fixes: 31bfdb036f12 ("powerpc: Use instruction emulation infrastructure to handle alignment faults") Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Tested-by: Michal Sojka <sojkam1@fel.cvut.cz> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-14firmware: delete in-kernel firmwareGreg Kroah-Hartman
The last firmware change for the in-kernel firmware source code was back in 2013. Everyone has been relying on the out-of-tree linux-firmware package for a long long time. So let's drop it, it's baggage we don't need to keep dragging around (and having to fix random kbuild issues over time...) Cc: Kyle McMartin <kyle@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Marek <mmarek@suse.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-14Merge tag 'kbuild-v4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Use Make-builtin $(abspath ...) helper to get absolute path - Add W=2 extra warning option to detect unused macros - Use more KCONFIG_CONFIG instead hard-coded .config - Fix bugs of tar*-pkg targets * tag 'kbuild-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: buildtar: do not print successful message if tar returns error kbuild: buildtar: fix tar error when CONFIG_MODULES is disabled kbuild: Use KCONFIG_CONFIG in buildtar Kbuild: enable -Wunused-macros warning for "make W=2" kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)
2017-09-14Merge tag 'for-4.14/dm-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Some request-based DM core and DM multipath fixes and cleanups - Constify a few variables in DM core and DM integrity - Add bufio optimization and checksum failure accounting to DM integrity - Fix DM integrity to avoid checking integrity of failed reads - Fix DM integrity to use init_completion - A couple DM log-writes target fixes - Simplify DAX flushing by eliminating the unnecessary flush abstraction that was stood up for DM's use. * tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dax: remove the pmem_dax_ops->flush abstraction dm integrity: use init_completion instead of COMPLETION_INITIALIZER_ONSTACK dm integrity: make blk_integrity_profile structure const dm integrity: do not check integrity for failed read operations dm log writes: fix >512b sectorsize support dm log writes: don't use all the cpu while waiting to log blocks dm ioctl: constify ioctl lookup table dm: constify argument arrays dm integrity: count and display checksum failures dm integrity: optimize writing dm-bufio buffers that are partially changed dm rq: do not update rq partially in each ending bio dm rq: make dm-sq requeuing behavior consistent with dm-mq behavior dm mpath: complain about unsupported __multipath_map_bio() return values dm mpath: avoid that building with W=1 causes gcc 7 to complain about fall-through
2017-09-14Merge tag 'fbdev-v4.14' of git://github.com/bzolnier/linuxLinus Torvalds
Pull fbdev updates from Bartlomiej Zolnierkiewicz: - make fbcon a built-time depency for fbdev (fbcon was tristate option before, now it is a bool) - this is a first step in preparations for making console_lock usage saner (currently it acts like the BKL for all things fbdev/fbcon) (Daniel Vetter) - add fbcon=margin:<color> command line option to select the fbcon margin color (David Lechner) - add DMI quirk table for x86 systems which need fbcon rotation (devices like Asus T100HA, GPD Pocket, the GPD win and the I.T.Works TW891) (Hans de Goede) - fix 1bpp logo support for unusual width (needed by LEGO MINDSTORMS EV3) (David Lechner) - enable Xilinx FB driver for ARM ZynqMP platform (Michal Simek) - fix use after free in the error path of udlfb driver (Anton Vasilyev) - fix error return code handling in pxa3xx_gcu driver (Gustavo A. R. Silva) - fix bootparams.screeninfo arguments checking in vgacon (Jan H. Schönherr) - do not leak uninitialized padding in clk to userspace in the debug code of atyfb driver (Vladis Dronov) - fix compiler warnings in fbcon code and matroxfb driver (Arnd Bergmann) - convert fbdev susbsytem to using %pOF instead of full_name (Rob Herring) - structures constifications (Arvind Yadav, Bhumika Goyal, Gustavo A. R. Silva, Julia Lawall) - misc cleanups (Gustavo A. R. Silva, Hyun Kwon, Julia Lawall, Kuninori Morimoto, Lynn Lei) * tag 'fbdev-v4.14' of git://github.com/bzolnier/linux: (75 commits) video/console: Update BIOS dates list for GPD win console rotation DMI quirk video/console: Add rotated LCD-panel DMI quirk for the VIOS LTH17 video: fbdev: sis: fix duplicated code for different branches video: fbdev: make fb_var_screeninfo const video: fbdev: aty: do not leak uninitialized padding in clk to userspace vgacon: Prevent faulty bootparams.screeninfo from causing harm video: fbdev: make fb_videomode const video/console: Add new BIOS date for GPD pocket to dmi quirk table fbcon: remove restriction on margin color video: ARM CLCD: constify amba_id video: fm2fb: constify zorro_device_id video: fbdev: annotate fb_fix_screeninfo with const and __initconst omapfb: constify omap_video_timings structures video: fbdev: udlfb: Fix use after free on dlfb_usb_probe error path fbdev: i810: make fb_ops const fbdev: matrox: make fb_ops const video: fbdev: pxa3xx_gcu: fix error return code in pxa3xx_gcu_probe() video: fbdev: Enable Xilinx FB for ZynqMP video: fbdev: Fix multiple style issues in xilinxfb video: fbdev: udlfb: constify usb_device_id. ...
2017-09-14Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog updates from Wim Van Sebroeck: - add support for the watchdog on Meson8 and Meson8m2 - add support for MediaTek MT7623 and MT7622 SoC - add support for the r8a77995 wdt - explicitly request exclusive reset control for asm9260_wdt, zx2967_wdt, rt2880_wdt and mt7621_wdt - improvements to asm9260_wdt, aspeed_wdt, renesas_wdt and cadence_wdt - add support for reading freq via CCF + suspend/resume support for of_xilinx_wdt - constify watchdog_ops and various device-id structures - revert of commit 1fccb73011ea ("iTCO_wdt: all versions count down twice") (Bug 196509) * git://www.linux-watchdog.org/linux-watchdog: (40 commits) watchdog: mei_wdt: constify mei_cl_device_id watchdog: sp805: constify amba_id watchdog: ziirave: constify i2c_device_id watchdog: sc1200: constify pnp_device_id dt-bindings: watchdog: renesas-wdt: Add support for the r8a77995 wdt watchdog: renesas_wdt: update copyright dates watchdog: renesas_wdt: make 'clk' a variable local to probe() watchdog: renesas_wdt: consistently use RuntimePM for clock management watchdog: aspeed: Support configuration of external signal properties dt-bindings: watchdog: aspeed: External reset signal properties drivers/watchdog: Add optional ASPEED device tree properties drivers/watchdog: ASPEED reference dev tree properties for config watchdog: da9063_wdt: Simplify by removing unneeded struct... watchdog: bcm7038: Check the return value from clk_prepare_enable() watchdog: qcom: Check for platform_get_resource() failure watchdog: of_xilinx_wdt: Add suspend/resume support watchdog: of_xilinx_wdt: Add support for reading freq via CCF dt-bindings: watchdog: mediatek: add support for MediaTek MT7623 and MT7622 SoC watchdog: max77620_wdt: constify platform_device_id watchdog: pcwd_usb: constify usb_device_id ...
2017-09-14Merge branch 'dmi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi update from Jean Delvare: "Mark all struct dmi_system_id instances const" * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: dmi: Mark all struct dmi_system_id instances const
2017-09-14Merge tag 'pinctrl-v4.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "This slew of fixes for pin control was noticed and patched up early, so to get the annoyance out of the way for -rc1 it would make sense to send them already. - Fix a build include in the Uniphier driver to keep pace with ongoing refactorings. - Fix a slew of minor semantic and syntactic issues as well as stricting up Kconfig for the new Spreadtrum driver. - Fix the GPIO interrupt set-up on the Marvell 37xx Armada as fallout for dynamically allocating irq descriptors from the core. (Also tagged for stable.) - Fix AMD register suspend/resume state spool/unspooling so that wakeup works as it should. (Also tagged for stable.)" * tag 'pinctrl-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl/amd: save pin registers over suspend/resume pinctrl: armada-37xx: Fix gpio interrupt setup pinctrl: sprd: fix off by one bugs pinctrl: sprd: check for allocation failure pinctrl: sprd: Restrict PINCTRL_SPRD to ARCH_SPRD or COMPILE_TEST pinctrl: sprd: fix build errors and dependencies pinctrl: sprd: make three local functions static pinctrl: uniphier: include <linux/build_bug.h> instead of <linux/bug.h>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 18:41:57 +0000