summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-07-05carl9170: allow PSM if the 5 GHz band is selectedChristian Lamparter
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05carl9170: enable IEEE80211_HW_NEED_DTIM_PERIODChristian Lamparter
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05carl9170: import 1.9.4 firmware headersChristian Lamparter
This patch imports all shared header changes from carl9170fw.git. * update copyright boilerplate * add some more strategic __aligned(4). * WoWLAN Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05net, wireless: Don't return uninitialized in __cfg80211_stop_sched_scan()Jesper Juhl
If the 'driver_initiated' function argument to __cfg80211_stop_sched_scan() is not 0 then we'll return an uninitialized 'err' from the function. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05mac80211: Skip tailroom reservation for full HW-crypto devices with race fixYogesh Ashok Powar
Based on inputs from Johannes Berg <johannes@sipsolutions.net> from http://article.gmane.org/gmane.linux.kernel.wireless.general/68193 and http://article.gmane.org/gmane.linux.kernel.wireless.general/71702 In xmit path, devices that do full hardware crypto (including MMIC and ICV) need no tailroom. For such devices, tailroom reservation can be skipped if all the keys are programmed into the hardware (i.e software crypto is not used for any of the keys) and none of the keys wants software to generate Michael MIC and IV. v2: Added check for IV along with MMIC. Reported-by: Fabio Rossi <rossi.f@inwind.it> Tested-by: Fabio Rossi <rossi.f@inwind.it> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Cc: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> v3: Fixing races to avoid WARNING: at net/mac80211/wpa.c:397 ccmp_encrypt_skb+0xc4/0x1f0 Reported-by: Andreas Hartmann <andihartmann@01019freenet.de> Tested-by: Andreas Hartmann <andihartmann@01019freenet.de> v4: Added links with message ID Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-01iwlagn: remove the indirection for the rx write pointerEmmanuel Grumbach
Not needed since the driver split. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: remove hcmd opsWey-Yi Guy
All "agn" devices use the same hcmd functions, no need to call indirectly. remove hcmd_ops Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: call bt_coex directllyWey-Yi Guy
Call the 2-wire and advanced bt-coex function directly to avoid mistake Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: scd memory boundaryWey-Yi Guy
Assign memory boundary for SCD context, tx status and translation table Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: move the tx allocation funcs to the transport layerEmmanuel Grumbach
These functions allocate all the Tx context. Only the simple tx_init is exported as API. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: add rx_free to transport layerEmmanuel Grumbach
The transport layer ness to release all rx ressources. This function is an API for it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: introduce transport layer and implement rx_initEmmanuel Grumbach
The transport layer is responsible for all the queues, DMA rings etc... This is the beginning of the separation of all the code that is tighly related to HW design to the aforementioned transport layer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: add module parameter to disable stuck queue watchdog timerWey-Yi Guy
Add the parameter to disable stuck queue watchdog timer, different platforms might have different timing. Provide the option to disable the timer to prevent un-necessary firmware reload. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: add correct firmware name for 135 seriesWey-Yi Guy
135 series are WiFi/BT combo and require different uCode from 105 series. [A Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: re-define the testmode cmd and attr enumWey-Yi Guy
To make sure not having issues when adding new testmode commands or attributes in the future, re-define the enum. no functional changes Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-07-01iwlagn: verify mutex held for sync commandsJohannes Berg
Emmanuel noticed that there's no explicit checking that prevents the driver from attempting to issue multiple synchronous commands at the same time and wrote a patch to check. However, his patch warns only if a collision actually happened, an unlikely thing since the driver mutex should be held for synchronous command submissions. So instead of checking that a collision happened add a check that the mutex is held which ensures that collisions can't happen. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-06-29rtlwifi: potential forever loop in rtl92de_hw_init()Dan Carpenter
"i" should be an int here because we are trying to use it to count to 10000. The original code looks like it could hang in a forever loop. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29rtlwifi: rtl8192de: Fix build errors when using allyes configurationLarry Finger
After adding rtl8192de to linux-next, making the rtlwifi drivers be built-in results in the following warnings: LD drivers/net/wireless/rtlwifi/built-in.o drivers/net/wireless/rtlwifi/rtl8192de/built-in.o: In function `rtl92ce_sw_led_on': (.text+0x11fb6): multiple definition of `rtl92ce_sw_led_on' drivers/net/wireless/rtlwifi/rtl8192ce/built-in.o:(.text+0xa326): first defined here drivers/net/wireless/rtlwifi/rtl8192de/built-in.o:(.bss+0x0): multiple definition of `dm_digtable' drivers/net/wireless/rtlwifi/rtl8192c/built-in.o:(.bss+0x0): first defined here ld: Warning: size of symbol `dm_digtable' changed from 40 in drivers/net/wireless/rtlwifi/rtl8192c/built-in.o to 48 in drivers/net/wireless/rtlwifi/rtl8192de/built-in.o drivers/net/wireless/rtlwifi/rtl8192de/built-in.o: In function `rtl92ce_sw_led_off': (.text+0x11cfe): multiple definition of `rtl92ce_sw_led_off' drivers/net/wireless/rtlwifi/rtl8192ce/built-in.o:(.text+0xa06e): first defined here Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: correct 0x2059 radio initRafał Miłecki
Sometimes additional steps are performed while initializing 2059 radio. We did not find the condition yet, so make it always true for now. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29ath9k_htc: Add device ID for Sony UWA-BR100Mohammed Shafi Shajakhan
for more details please take a look at: http://comments.gmane.org/gmane.linux.drivers.ath9k.devel/6541 http://www.wikidevi.com/wiki/Sony_UWA-BR100 Reported-by: Thomas Novin <thomas@xyz.pp.se> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29ath9k: move few descriptor macros to ath9k.hMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: basic PHY initRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: add init tablesRafał Miłecki
They were written from observing MMIO writes to registers 0x72 0x74 and 0x73 right after phy_write(0x017e) <- 0x3830 which finishes chennel switching. RegExps were used to translate writes to arrays. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: init radio when enabling itRafał Miłecki
Masks and sets were found in MMIO dumps by using MMIO hacks. Shortly: radio_write(0x0c51) <- 0x0070 radio_write(0x0c5a) <- 0x0003 radio_write(0x0146) <- 0x0003 radio_write(0x0546) <- 0x0003 radio_write(0x0946) <- 0x0003 radio_write(0x002e) <- 0x0078 radio_write(0x00c0) <- 0x0080 radio_write(0x002e) <- 0xff87 radio_write(0x00c0) <- 0xff7f radio_write(0x0011) <- 0xfff7 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: replace radio routing magic numbersRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29wl12xx: AP-mode - use mac80211 indication about STA WME supportArik Nemtsov
When adding a station, use the information given in the mac80211 populated ieee80211_sta structure to determine if it supports WME. Provide this information to the FW. This patch depends on "mac80211: propagate information about STA WME support down". Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29mac80211: propagate information about STA WME support downArik Nemtsov
Add a memeber to the ieee80211_sta structure to indicate whether the STA supports WME. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29rtlwifi: use PCI_VENDOR_ID_*Jon Mason
Use PCI_VENDOR_ID_* from pci_ids.h instead of creating #define locally. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29rtlwifi: remove unnecessary read of PCI_CAP_ID_EXPJon Mason
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Also, remove unnecessary and unused #defines for PCI. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29iwlegacy: remove unnecessary read of PCI_CAP_ID_EXPJon Mason
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: implement lacking 0x908 PHY reg opRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: add channel switching tables for 2 GHz bandRafał Miłecki
Tables were taken from observing writes in MMIO dumps. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: perform some tables ops on channel switchingRafał Miłecki
Starring at MMIO dumps around PHY channel switching has led to finding serie of 3 similar ops this patch implements. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: upload PHY values when switching channelRafał Miłecki
After calibrating radio you can find few PHY writes in MMIO dumps: phy_read(0x0009) -> 0x0000 phy_write(0x01ce) <- 0x03dd phy_write(0x01cf) <- 0x03d9 phy_write(0x01d0) <- 0x03d5 phy_write(0x01d1) <- 0x0424 phy_write(0x01d2) <- 0x0429 phy_write(0x01d3) <- 0x042d By comparing to N-PHY code we found out that they are PHY tables for channel switching plus band info read at the beginning. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29b43: HT-PHY: prepare place for HT-PHY tablesRafał Miłecki
They are big arrays uploaded to the hardware on init, calibration, etc. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-tx.c
2011-06-28iwlagn: use PCI_DMA_* for pci_* operationsJohn W. Linville
"iwlagn: map command buffers BIDI" uses the DMA_* enumerations for DMA directions, even though the pci_* DMA API is still in use. That patch was undoubtedly developed on top of "iwlagn: don't use the PCI wrappers for DMA operation", which is due in the next release. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27mac80211: dynamic PS - don't enter PS when TX frames are pendingArik Nemtsov
Use the tx_frames_pending() driver callback to determine if Tx frames are pending for its internal queues. If so postpone the dynamic PS timeout to avoid interrupting Tx traffic. The commit e8306f989483e4b97a8b37dd268de6c8c6f35e75 enabled this behavior for drivers with IEEE80211_HW_PS_NULLFUNC_STACK. We enable this for all drivers supporting dynamic PS. This patch helps improve performance in noisy environments. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27bcma: main.c needs to include <linux/slab.h>Geert Uytterhoeven
m68k allmodconfig: drivers/bcma/main.c: In function ‘bcma_release_core_dev’: drivers/bcma/main.c:68: error: implicit declaration of function ‘kfree’ Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> -- http://kisskb.ellerman.id.au/kisskb/buildresult/4243344/ drivers/bcma/main.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27iwlwifi: use pci_dev->revision, againSergei Shtylyov
Commit ff938e43d39e926de74b32a3656c190f979ab642 (net: use pci_dev->revision, again) already converted this driver to using the 'revision' field of 'struct pci_dev' but commit 084dd79172cb3aad11d2b7ee5628d57badca7c6e (iwlagn: move PCI related operations from probe and remove to PCI layer) has again added the code to read the PCI revision ID register... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27mwifiex: restore handling of NULL parametersDan Carpenter
Prior to a5ffddb70c5cab "mwifiex: remove casts of void pointers" the code assumed that the data_buf parameter could be a NULL pointer. The patch preserved some NULL checks but not consistently, so there was a potential for NULL dereferences and it changed the behavior. This patch restores the original behavior. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27ath9k: Fix locking issue during tx completionRajkumar Manoharan
The received tx status of aggregated frame without BlockAck may cause deaf state in AR5416 cards. So the driver does a reset to recover. When this happens, we release the pcu_lock before doing a reset as ath_rest acquires pcu_lock. This is ugly and also not atomic. Fixing this addresses the TX DMA failure also. ath_tx_complete_aggr can be called from different paths which takes different variants of spin_lock. This patch also addresses the following warning. WARNING: at kernel/timer.c:1011 del_timer_sync+0x4e/0x50() Call Trace: <IRQ> [<ffffffff8104be3a>] warn_slowpath_common+0x7a/0xb0 [<ffffffff8104be85>] warn_slowpath_null+0x15/0x20 [<ffffffff8105915e>] del_timer_sync+0x4e/0x50 [<ffffffffa03726be>] ath_reset+0x3e/0x210 [ath9k] [<ffffffff8135cdaf>] ? _raw_spin_unlock_bh+0x1f/0x30 [<ffffffffa037760a>] ath_tx_complete_aggr.isra.26+0x54a/0xa40 [ath9k] Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27iwlagn: fix rmmod crashStanislaw Gruszka
priv->bus.bus_specific pointer is used after priv structures was freed, in iwl_pci_remove(), what make ugly rmmod crash. This bug was introduced by current pci changes. On the way remove fake check, if prober error code is returned from .probe() function, .remove() will never be called be null drvdata. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27rt2x00: Fix unspeficied typoJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27mac80211: Drop DS Channel PARAM in directed probePaul Stewart
Do not send DS Channel parameter for directed probe requests in order to maximize the chance that we get a response. Some badly-behaved APs don't respond when this parameter is included. Signed-off-by: Paul Stewart <pstew@chromium.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27ssb: use pci_dev->revisionSergei Shtylyov
The bus scan code reads PCI revision ID from the PCI configuration register while it's already stored by PCI subsystem in the 'revision' field of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27ath9k_hw: make use of the gain_table_entry macroMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27ath9k_hw: Add carrier leak correction in desired gain calculationMohammed Shafi Shajakhan
Cc: muddin@qca.qualcomm.com Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27ath9k_hw: Fix false tx hung detection in AR9003 chipsRajkumar Manoharan
The edma based (AR9003 family) chips update tx status descriptors in a common ring buffer for all transmitted frames. Whenever tx interrupt is raised, the descriptors are processed and tx status index is moved. The complete tx stauts ring are updated with beacons tx status when there are no data frames to be sent for a period of time. In this state, transmitting data frames causes the driver to wait for the tx status on an incorrect tx status index though the status was updated by hw properly. The driver detects this condition as a h/w hang and does unnecessary chip resets. This issue was orginally reported in adhoc mode while sending frames after an idle time. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27mac80211: reestablish mis-configured existing Rx BA sessionsArik Nemtsov
When forming a Rx BA session, sometimes the ADDBA response gets lost. This leads to a situation where the session is configured locally, but doesn't exist on the remote side. Subsequent ADDBA requests are declined by mac80211. Fix this by assuming the session state of the initiator is the correct one. When receiving an unexpected ADDBA request on a TID with an active Rx BA session, delete the existing one and establish a new session. Signed-off-by: Arik Nemtsov <arik@wizery.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 00:38:40 +0000