summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-29MIPS: DECstation I/O ASIC DMA interrupt classesMaciej W. Rozycki
This change complements commits d0da7c002f7b2a93582187a9e3f73891a01d8ee4 [MIPS: DEC: Convert to new irq_chip functions] and 5359b938c088423a28c41499f183cd10824c1816 [MIPS: DECstation I/O ASIC DMA interrupt handling fix] and implements automatic handling of the two classes of DMA interrupts the I/O ASIC implements, informational and errors. Informational DMA interrupts do not stop the transfer and use the `handle_edge_irq' handler that clears the request right away so that another request may be recorded while the previous is being handled. DMA error interrupts stop the transfer and require a corrective action before DMA can be reenabled. Therefore they use the `handle_fasteoi_irq' handler that only clears the request on the way out. Because MIPS processor interrupt inputs, one of which the I/O ASIC's interrupt controller is cascaded to, are level-triggered it is recommended that error DMA interrupt action handlers are registered with the IRQF_ONESHOT flag set so that they are run with the interrupt line masked. This change removes the export of clear_ioasic_dma_irq that now does not have to be called by device drivers to clear interrupts explicitly anymore. Originally these interrupts were cleared in the .end handler of the `irq_chip' structure, before it was removed. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5874/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Remove unnecessary platform dma helper functionsFelix Fietkau
The semantics stay the same - on Cavium Octeon the functions were dead code (it overrides the MIPS DMA ops) - on other platforms they contained no code at all. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5720/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Cobalt: Move to 8250/16550 serial early printk driverYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/948/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Add 8250/16550 serial early printk driverYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/947/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: ZBOOT: Support LZ4 compression schemeFlorian Fainelli
Add support for the LZ4 compression scheme in the ZBOOT decompression stub, in order to support it we need to: - select the "lz4" compression tool to compress the vmlinux.bin payload - memcpy() is also required for decompress_unlz4.c so we share the implementation between GZIP, XZ and now LZ4 Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: james.hogan@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/5829/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: ZBOOT: Define program header for text loadable segmentFlorian Fainelli
There is currently no corresponding ELF program header for the "text" loadable segment which is confusing for some bootloader out there such as CFE because it expects to find a program header matching the segment it is trying to load. The Linux kernel ELF binary "vmlinux" has a similar program header for the text segment so we just mimic this here too. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: james.hogan@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/5827/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: ZBOOT: Support XZ compression schemeFlorian Fainelli
Add support for the XZ compression scheme in the ZBOOT decompression stub, in order to support it we need to: - select the "xzkern" compression tool to compress the vmlinux.bin payload - link with ashldi3.o for xz_dec_run() to work - memcpy() is also required for decompress_unxz.c so we share the implementation between GZIP and XZ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: james.hogan@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/5818/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Kbuild: Do not allow building vmlinuz when !ZBOOTFlorian Fainelli
When CONFIG_SYS_SUPPORTS_ZBOOT is not enabled, we will still try to build the decompressor code in arch/mips/boot/compressed as a dependency for producing the vmlinuz target and this will result in the following build failure: OBJCOPY arch/mips/boot/compressed/vmlinux.bin arch/mips/boot/compressed/decompress.c: In function 'decompress_kernel': arch/mips/boot/compressed/decompress.c:105:2: error: implicit declaration of function 'decompress' make[1]: *** [arch/mips/boot/compressed/decompress.o] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [vmlinuz] Error 2 This is a genuine build failure because we have no implementation for the decompress() function body since no kernel compression method defined in CONFIG_KERNEL_(GZIP,BZIP2...) has been enabled. arch/mips/Makefile already guards the install target for the "vmlinuz" binary with a proper ifdef CONFIG_SYS_SUPPORTS_ZBOOT, we now also do the same if we attempt to do a "make vmlinuz" and show that CONFIG_SYS_SUPPORTS_ZBOOT is not enabled. [ralf@linux-mips.org: Cleanup the makefile rule as suggested by James Hogan.] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: richard@nod.at Patchwork: https://patchwork.linux-mips.org/patch/5817/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Fix start of free memory when using initrdGreg Ungerer
Currently when using an initrd on a MIPS system the start of the bootmem region of memory is set to the larger of the end of the kernel bss region (_end) or the end of the initrd. In a typical memory layout where the initrd is at some address above the kernel image this means that the start of the bootmem region will be the end of the initrd. But when we are done processing/loading the initrd we have no way to reclaim the memory region it occupied, and we lose a large chunk of now otherwise empty RAM from our final running system. The bootmem code is designed to allow this initrd to be reserved (and the code in finalize_initrd() currently does this). When the initrd is finally processed/loaded its reserved memory is freed. Fix the setting of the start of the bootmem map to be the end of the kernel. [ralf@linux-mips.org: fold in the fix of Ashok Kumar <ashoks@broadcom.com>.] Signed-off-by: Greg Ungerer <gerg@uclinux.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1574/ Cc: Ashok Kumar <ashoks@broadcom.com> Patchwork: https://patchwork.linux-mips.org/patch/5883/ Patchwork: https://patchwork.linux-mips.org/patch/6028/ Patchwork: https://patchwork.linux-mips.org/patch/6064/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Quiet the building output of vmlinux.32 and vmlinux.64Wu Zhangjin
Based on quiet_cmd_X and cmd_X, this patch quiets the building output of vmlinux.32 and vmlinux.64. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Sam Ravnborg <sam@ravnborg.org> Patchwork: https://patchwork.linux-mips.org/patch/1766/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Panic messages should not end in \n.Ralf Baechle
Panic() is going to add a \n itself and it's annoying if a panic message rolls of the screen on a device with no scrollback. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Use NUMA_NO_NODE instead of -1 for node ID.Ralf Baechle
Original patch by Jianguo Wu <wujianguo@huawei.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: of/pci: Use of_pci_range_parserAndrew Murray
This patch converts the pci_load_of_ranges function to use the new common of_pci_range_parser. Signed-off-by: Andrew Murray <amurray@embedded-bits.co.uk> Signed-off-by: Andrew Murray <Andrew.Murray@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: jason@lakedaemon.net Patchwork: https://patchwork.linux-mips.org/patch/5625/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: BCM47XX: Fix detected clock on Asus WL520GC and WL520GUHauke Mehrtens
The Asus WL520GC and WL520GU are based on the BCM5354 and clocked at 200MHz, but they do not have a clkfreq nvram variable set to the correct value. This adds a workaround for these devices. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5843/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: BCM47XX: Fix clock detection for BCM5354 with 200MHz clockHauke Mehrtens
Some BCM5354 SoCs are running at 200MHz, but it is not possible to read the clock from a register like it is done on some other SoC in ssb and bcma. These devices should have a clkfreq nvram configuration value set to 200, read it and set the clock to the correct value. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5842/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: BCM47XX: Get GPIO pin from nvram configurationHauke Mehrtens
The nvram contains some gpio configuration for boards. It is stored in a gpio<number>=name format e.g. gpio8=wps_button gpio4=robo_reset This patches adds a function to parse these entries, so other driver can use it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5841/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: BCM47XX: Print board name in /proc/cpuinfoHauke Mehrtens
Do not print the constant system type "Broadcom BCM47XX" but print the name of the actual SoC in use and the detected board. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5839/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: BCM47XX: Add board detectionHauke Mehrtens
Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Kconfig: CMP support needs to select SMP as wellMarkos Chandras
The CMP code is only designed to work with SMP configurations. Fixes multiple build problems on certain randconfigs: In file included from arch/mips/kernel/smp-cmp.c:34:0: arch/mips/include/asm/smp.h:28:0: error: "raw_smp_processor_id" redefined [-Werror] In file included from include/linux/sched.h:30:0, from arch/mips/kernel/smp-cmp.c:22: include/linux/smp.h:135:0: note: this is the location of the previous definition In file included from arch/mips/kernel/smp-cmp.c:34:0: arch/mips/include/asm/smp.h:57:20: error: redefinition of 'smp_send_reschedule' In file included from include/linux/sched.h:30:0, from arch/mips/kernel/smp-cmp.c:22: include/linux/smp.h:179:20: note: previous definition of 'smp_send_reschedule' was here In file included from arch/mips/kernel/smp-cmp.c:34:0: arch/mips/include/asm/smp.h: In function 'smp_send_reschedule': arch/mips/include/asm/smp.h:61:8: error: dereferencing pointer to incomplete type [...] Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/5812/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Move definition of SMP processor id register to header fileJayachandran C
The definition of the CP0 register used to save the smp processor id is repicated in many files, move them all to thread_info.h. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5708/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: ath79: Remove ar933x_uart_platform.h headerGabor Juhos
In commit 15ef17f622033455dcf03ae96256e474073a7b11 (tty: ar933x_uart: use the clk API to get the uart clock), the AR933x UART driver for has been converted to get the uart clock rate via the clock API and it does not use the platform data anymore. Remove the ar933x_uart_platform.h header file and get rid of the superfluous variable and initialization code in platform setup. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5832/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: ath79: simplify platform_get_resource_byname/devm_ioremap_resourceJulia Lawall
Remove unneeded error handling on the result of a call to platform_get_resource_byname when the value is passed to devm_ioremap_resource. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,e,e1; expression ret != 0; identifier l; @@ res = platform_get_resource_byname(...); - if (res == NULL) { ... \(goto l;\|return ret;\) } e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Gabor Juhos <juhosg@openwrt.org> Cc: kernel-janitors@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5725/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: SMP: kill redundant call of generic_smp_call_function_single_interrupt()Jiang Liu
Since commit 9a46ad6d6df3b54 "smp: make smp_call_function_many() use logic similar to smp_call_function_single()", generic_smp_call_function_single_interrupt() is an alias of generic_smp_call_function_interrupt(), so kill the redundant call. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shaohua Li <shli@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jiri Kosina <trivial@kernel.org> Cc: Wang YanQing <udknight@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: linux-arch@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5820/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-27Linux 3.12-rc7Linus Torvalds
2013-10-27Merge branch 'parisc-3.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "This is a 2-line patch to save the CPU register which holds our task thread info pointer before calling a firmware function and then to restore it again afterwards. This is necessary because on some 64bit machines the high-order 32bits are being clobbered by the firmware call, and thus we failed to bring up secondary CPUs (and instead crashed the kernel) in some situations eg if we had more than 4GB RAM. This patch fixes a bug which has been since ever in the parisc linux kernel and which prevented some people to use a 64bit kernel" * 'parisc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Do not crash 64bit SMP kernels on machines with >= 4GB RAM
2013-10-27Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "This tree contains a clockevents regression fix for certain ARM subarchitectures" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clockevents: Sanitize ticks to nsec conversion
2013-10-27Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "The tree contains three fixes: - Two tooling fixes - Reversal of the new 'MMAP2' extended mmap record ABI, introduced in this merge window. (Patches were proposed to fix it but it was all a bit late and we felt it's safer to just delay the ABI one more kernel release and do it right)" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Disable PERF_RECORD_MMAP2 support perf scripting perl: Fix build error on Fedora 12 perf probe: Fix to initialize fname always before use it
2013-10-27Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Ingo Molnar: "This tree fixes a boot crash in CONFIG_DEBUG_MUTEXES=y kernels, on kernels built with GCC 3.x (there are still such distros)" Side note: it's not just a fix for old gcc versions, it's also removing an incredibly broken/subtle check that LLVM had issues with, and that made no sense. * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mutex: Avoid gcc version dependent __builtin_constant_p() usage
2013-10-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "Here are the outstanding target pending fixes for v3.12-rc7. This includes a number of EXTENDED_COPY related fixes as a result of Thomas and Doug's continuing testing and feedback. Also included is an important vhost/scsi fix that addresses a long standing issue where the 'write' parameter for get_user_pages_fast() was incorrectly set for virtio-scsi WRITEs -> DMA_TO_DEVICE, and not for virtio-scsi READs -> DMA_FROM_DEVICE. This resulted in random userspace segfaults and other unpleasantness on KVM host, and unfortunately has been an issue since the initial merge of vhost/scsi in v3.6. This patch is CC'ed to stable, along with two other less critical items" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: vhost/scsi: Fix incorrect usage of get_user_pages_fast write parameter target/pscsi: fix return value check target: Fail XCOPY for non matching source + destination block_size target: Generate failure for XCOPY I/O with non-zero scsi_status target: Add missing XCOPY I/O operation sense_buffer iser-target: check device before dereferencing its variable target: Return an error for WRITE SAME with ANCHOR==1 target: Fix assignment of LUN in tracepoints target: Reject EXTENDED_COPY when emulate_3pc is disabled target: Allow non zero ListID in EXTENDED_COPY parameter list target: Make target_do_xcopy failures return INVALID_PARAMETER_LIST
2013-10-27Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine fixes from Vinod Koul: "Here is the late fixes pull request for dmaengine while you fly back from KS. We have a new dmaengine ML hosted by vger so a patch for that along with addition of Dave as driver mainatainer for ioat. Other fixes are memeory leak fixes on edma driver, small fixes on rcar-hpbdma driver by Sergei" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: edma: fix another memory leak dma: edma: Fix memory leak MAINTAINERS: add to ioatdma maintainer list MAINTAINERS: add the new dmaengine mailing list
2013-10-27parisc: Do not crash 64bit SMP kernels on machines with >= 4GB RAMHelge Deller
Since the beginning of the parisc-linux port, sometimes 64bit SMP kernels were not able to bring up other CPUs than the monarch CPU and instead crashed the kernel. The reason was unclear, esp. since it involved various machines (e.g. J5600, J6750 and SuperDome). Testing showed, that those crashes didn't happened when less than 4GB were installed, or if a 32bit Linux kernel was booted. In the end, the fix for those SMP problems is trivial: During the early phase of the initialization of the CPUs, including the monarch CPU, the PDC_PSW firmware function to enable WIDE (=64bit) mode is called. It's documented that this firmware function may clobber various registers, and one one of those possibly clobbered registers is %cr30 which holds the task thread info pointer. Now, if %cr30 would always have been clobbered, then this bug would have been detected much earlier. But lots of testing finally showed, that - at least for %cr30 - on some machines only the upper 32bits of the 64bit register suddenly turned zero after the firmware call. So, after finding the root cause, the explanation for the various crashes became clear: - On 32bit SMP Linux kernels all upper 32bit were zero, so we didn't faced this problem. - Monarch CPUs in 64bit mode always booted sucessfully, because the inital task thread info pointer was below 4GB. - Secondary CPUs booted sucessfully on machines with less than 4GB RAM because the upper 32bit were zero anyay. - Secondary CPus failed to boot if we had more than 4GB RAM and the task thread info pointer was located above the 4GB boundary. Finally, the patch to fix this problem is trivial by saving the %cr30 register before the firmware call and restoring it afterwards. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> # 2.6.12+ Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-26Merge tag 'pm+acpi-3.12-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from "These fix two bugs in the intel_pstate driver, a hibernate bug leading to nasty resume failures sometimes and acpi-cpufreq initialization bug that causes problems to happen during module unload when intel_pstate is in use. Specifics: - Fix for rounding errors in intel_pstate causing CPU utilization to be underestimated from Brennan Shacklett. - intel_pstate fix to always use the correct max pstate value when computing the min pstate from Dirk Brandewie. - Hibernation fix for deadlocking resume in cases when the probing of the device containing the image is deferred from Russ Dill. - acpi-cpufreq fix to prevent the module from staying in memory when the driver cannot be registered and then attempting to unregister things that have never been registered on exit" * tag 'pm+acpi-3.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: acpi-cpufreq: Fail initialization if driver cannot be registered PM / hibernate: Move software_resume to late_initcall_sync intel_pstate: Correct calculation of min pstate value intel_pstate: Improve accuracy by not truncating until final result
2013-10-25Merge tag 'for-linus-20131025' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull final mtd fixes from Brian Norris: "A few more last-minute regression fixes, prepared jointly by me and David Woodhouse: - Revert pxa3xx to its old name to avoid breaking existing 'mtdparts=' boot strings. - Return GPMI NAND to its legacy ECC layout for backwards compatibility. We will revisit this in 3.13. A note from David on the latter fix: 'This leaves a harmless cosmetic warning about an unused function. At this point in the cycle I really don't care.'" * tag 'for-linus-20131025' of git://git.infradead.org/linux-mtd: mtd: gpmi: fix ECC regression mtd: nand: pxa3xx: Fix registered MTD name
2013-10-25vhost/scsi: Fix incorrect usage of get_user_pages_fast write parameterNicholas Bellinger
This patch addresses a long-standing bug where the get_user_pages_fast() write parameter used for setting the underlying page table entry permission bits was incorrectly set to write=1 for data_direction=DMA_TO_DEVICE, and passed into get_user_pages_fast() via vhost_scsi_map_iov_to_sgl(). However, this parameter is intended to signal WRITEs to pinned userspace PTEs for the virtio-scsi DMA_FROM_DEVICE -> READ payload case, and *not* for the virtio-scsi DMA_TO_DEVICE -> WRITE payload case. This bug would manifest itself as random process segmentation faults on KVM host after repeated vhost starts + stops and/or with lots of vhost endpoints + LUNs. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Asias He <asias@redhat.com> Cc: <stable@vger.kernel.org> # 3.6+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-25target/pscsi: fix return value checkWei Yongjun
In case of error, the function scsi_host_lookup() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes (try two) from Al Viro: "nfsd performance regression fix + seq_file lseek(2) fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: seq_file: always update file->f_pos in seq_lseek() nfsd regression since delayed fput()
2013-10-25mtd: gpmi: fix ECC regressionDavid Woodhouse
The "legacy" ECC layout used until 3.12-rc1 uses all the OOB area by computing the ECC strength and ECC step size ourselves. Commit 2febcdf84b ("mtd: gpmi: set the BCHs geometry with the ecc info") makes the driver use the ECC info (ECC strength and ECC step size) provided by the MTD code, and creates a different NAND ECC layout for the BCH, and use the new ECC layout. This causes a regression: We can not mount the ubifs which was created by the old NAND ECC layout. This patch fixes this issue by reverting to the legacy ECC layout. We will probably introduce a new device-tree property to indicate that the new ECC layout can be used. For now though, for the imminent 3.12 release, we just unconditionally revert to the 3.11 behaviour. This leaves a harmless cosmetic warning about an unused function. At this point in the cycle I really don't care. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de>
2013-10-25seq_file: always update file->f_pos in seq_lseek()Gu Zheng
This issue was first pointed out by Jiaxing Wang several months ago, but no further comments: https://lkml.org/lkml/2013/6/29/41 As we know pread() does not change f_pos, so after pread(), file->f_pos and m->read_pos become different. And seq_lseek() does not update file->f_pos if offset equals to m->read_pos, so after pread() and seq_lseek()(lseek to m->read_pos), then a subsequent read may read from a wrong position, the following program produces the problem: char str1[32] = { 0 }; char str2[32] = { 0 }; int poffset = 10; int count = 20; /*open any seq file*/ int fd = open("/proc/modules", O_RDONLY); pread(fd, str1, count, poffset); printf("pread:%s\n", str1); /*seek to where m->read_pos is*/ lseek(fd, poffset+count, SEEK_SET); /*supposed to read from poffset+count, but this read from position 0*/ read(fd, str2, count); printf("read:%s\n", str2); out put: pread: ck_netbios_ns 12665 read: nf_conntrack_netbios /proc/modules: nf_conntrack_netbios_ns 12665 0 - Live 0xffffffffa038b000 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns, Live 0xffffffffa0386000 So we always update file->f_pos to offset in seq_lseek() to fix this issue. Signed-off-by: Jiaxing Wang <hello.wjx@gmail.com> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-25acpi-cpufreq: Fail initialization if driver cannot be registeredRafael J. Wysocki
Make acpi_cpufreq_init() return error codes when the driver cannot be registered so that the module doesn't stay useless in memory and so that acpi_cpufreq_exit() doesn't attempt to unregister things that have never been registered when the module is unloaded. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-10-25Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "There's really only one bugfix in this branch, which is a fix for timers on the integrator platform. Since Linus Walleij is resurrecting support for the platform it seems valuable to get the fix into 3.12 even though the regression has been around a while. The rest are a handful of maintainers updates. If you prefer to hold those until 3.13 then just merge the first patch on the branch which is the fix" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Add maintainers entry for Rockchip SoCs MAINTAINERS: Tegra updates, and driver ownership MAINTAINERS: ARM: mvebu: add Sebastian Hesselbarth ARM: integrator: deactivate timer0 on the Integrator/CP
2013-10-25Merge tag 'ecryptfs-3.12-rc7-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull ecryptfs fixes from Tyler Hicks: "Two important fixes - Fix long standing memory leak in the (rarely used) public key support - Fix large file corruption on 32 bit architectures" * tag 'ecryptfs-3.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: fix 32 bit corruption issue ecryptfs: Fix memory leakage in keystore.c
2013-10-25PM / hibernate: Move software_resume to late_initcall_syncRuss Dill
software_resume is being called after deferred_probe_initcall in drivers base. If the probing of the device that contains the resume image is deferred, and the system has been instructed to wait for it to show up, this wait will occur in software_resume. This causes a deadlock. Move software_resume into late_initcall_sync so that it happens after all the other late_initcalls. Signed-off-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Pavel Machek <Pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-24mtd: nand: pxa3xx: Fix registered MTD nameEzequiel Garcia
In a recent commit: commit f455578dd961087a5cf94730d9f6489bb1d355f0 Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Date: Mon Aug 12 14:14:53 2013 -0300 mtd: nand: pxa3xx: Remove hardcoded mtd name There's no advantage in using a hardcoded name for the mtd device. Instead use the provided by the platform_device. The MTD name was changed to use the one provided by the platform_device. However, this can be problematic as some users want to set partitions using the kernel parameter 'mtdparts', where the name is needed. Therefore, to avoid regressions in users relying in 'mtdparts' we revert the change and use the previous one 'pxa3xx_nand-0'. While at it, let's put a big comment and prevent this change from happening ever again. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-24eCryptfs: fix 32 bit corruption issueColin Ian King
Shifting page->index on 32 bit systems was overflowing, causing data corruption of > 4GB files. Fix this by casting it first. https://launchpad.net/bugs/1243636 Signed-off-by: Colin Ian King <colin.king@canonical.com> Reported-by: Lars Duesing <lars.duesing@camelotsweb.de> Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
2013-10-24dmaengine: edma: fix another memory leakVinod Koul
commit 4b6271a6 fix a menory leak but one more existed in driver so fix that Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-24dma: edma: Fix memory leakValentin Ilie
When it fails to allocate a slot, edesc should be free'd before return; Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-24target: Fail XCOPY for non matching source + destination block_sizeNicholas Bellinger
This patch adds an explicit check + failure for XCOPY I/O to source + destination devices with a non-matching block_size. This limitiation is currently due to the fact that the scatterlist memory allocated for the XCOPY READ operation is passed zero-copy to the XCOPY WRITE operation. Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-24target: Generate failure for XCOPY I/O with non-zero scsi_statusNicholas Bellinger
This patch adds the missing non-zero se_cmd->scsi_status check required for local XCOPY I/O within target_xcopy_issue_pt_cmd() to signal an exception case failure. This will trigger the generation of SAM_STAT_CHECK_CONDITION status from within target_xcopy_do_work() process context code. Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-24target: Add missing XCOPY I/O operation sense_bufferNicholas Bellinger
This patch adds the missing xcopy_pt_cmd->sense_buffer[] required for correctly handling CHECK_CONDITION exceptions within the locally generated XCOPY I/O path. Also update target_xcopy_read_source() + target_xcopy_setup_pt_cmd() to pass this buffer into transport_init_se_cmd() to correctly setup se_cmd->sense_buffer. Reported-by: Thomas Glanzmann <thomas@glanzmann.de> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-24Merge tag 'md/3.12-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull md bugfixes from Neil Brown: "Assorted md bug-fixes for 3.12. All tagged for -stable releases too" * tag 'md/3.12-fixes' of git://neil.brown.name/md: raid5: avoid finding "discard" stripe raid5: set bio bi_vcnt 0 for discard request md: avoid deadlock when md_set_badblocks. md: Fix skipping recovery for read-only arrays.
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-28 06:23:04 +0000