summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-08-03OMAP: DSS2: DSI: change dsi_vc_dcs_read_2 parametersTomi Valkeinen
Change dsi_vc_dcs_read_2() data parameter to two u8 parameters to make the byte-order clear. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: DSI: use a private workqueueTomi Valkeinen
Using the shared workqueue led to to a deadlock in the case where the display was unblanked via keyboard. What happens is something like this: - User presses a key context 1: - drivers/char/keyboard.c calls schedule_console_callback() - fb_unblank takes the console semaphore - dsi bus lock is taken, and frame transfer is started (dsi bus lock is left on) - Unblank code tries to set the panel backlight, which tries to take dsi bus lock, but is blocked while the frame transfer is going on context 2, shared workqueue, console_callback in drivers/char/vt.c: - Tries to take console semaphore - Blocks, as console semaphore is being held by context 1 - No other shared workqueue work can be run context 3, HW irq, caused by FRAMEDONE interrupt: - Interrupt handler schedules framedone-work in shared workqueue - Framedone-work is never ran, as the shared workqueue is blocked. This means that the unblank thread stays blocked, which means that context 2 stays blocked. While I think the real problem is in keyboard/virtual terminal code, using a private workqueue in the DSI driver is perhaps safer and more robust than using the shared one. The DSI works should not be delayed more than a millisecond or so, and even if the private workqueue gives us no hard promise of doing so, it's still safer bet than the shared workqueue. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: DSI: print errors in dsi_vc_flush_receive_data()Tomi Valkeinen
dsi_vc_flush_receive_data() is meant to dump data when something has gone wrong, and thus we should use DSSERR, not DSSDBG. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: OMAPFB: Add some locking debug checksVille Syrjälä
Trigger WARN_ON() messages from various places in the code in case the memory region is not currently locked. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: OMAPFB: Make lockdep happyVille Syrjälä
When more than one memory region needs to be lockd at the same time use the memory region id to fix the order in which the locks are taken. Also one needs to use the _nested() versions of the locking primitives. The memory region id can serve as the lock class there as well. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: OMAPFB: Convert the memory region locking to rwsemVille Syrjälä
R/W semaphore is a good fit for the memory region locking pattern. So use it. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: OMAPFB: Add locking for memory regionsVille Syrjälä
Add locking to the memory regions to make sure the memory region size won't be changed while some other piece of code is performing some checks or setup based on that information. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: OMAPFB: Add support for switching memory regionsVille Syrjälä
Separate the memory region from the framebuffer device a little bit. It's now possible to select the memory region used by the framebuffer device using the new mem_idx parameter of omapfb_plane_info. If the mem_idx is specified it will be interpreted as an index into the memory regions array, if it's not specified the framebuffer's index is used instead. So by default each framebuffer keeps using it's own memory region which preserves backwards compatibility. This allows cloning the same memory region to several overlays and yet each overlay can be controlled independently since they can be associated with separate framebuffer devices. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: OMAPFB: Skip unnecessary set_overlay_info()Ville Syrjälä
In omapfb_enable_overlay() if the overlay state is already what we want skip the set_overlay_info(). Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: OMAPFB: Check var even if there isn't memoryVille Syrjälä
If video memory hasn't been allocate have check_fb_var() still check most of the settings, just skip the ones involving the size of the memory region. Also skip the memory address calculations in omapfb_setup_overlay() if there's no memory. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: OMAPFB: Refactor overlay address calculationsVille Syrjälä
Split the overlay address calculations into their own function. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Fix update area calculations with multiple scaled overlaysTomi Valkeinen
When there are multiple scaled overlays simply checking whether the update area intersects any of them in order is not enough. If eg. VID1 starts out completely outside the update area but VID2 causes the update area to increase in such a way that VID1 now falls partially within the increased update area VID1 should be rechecked and the update area possibly increased even further to fully encompass VID1. So simply keep looping over the overlays until such time that none of the overlays caused the update area to change. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: clear spurious SYNC_LOST_DIGIT interruptsVille Syrjälä
When DSS transitions from off mode to on VENC may generate a spurious SYNC_LOST_DIGIT error. Just ack it when restoring the context. Also restore IRQENABLE last to avoid triggering interrupts before the context is fully restored. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Make wait_for_go() succeed for disabled displaysVille Syrjälä
When the display is not active make the wait_for_go() functions return immediately. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Check if display supports update mode changesVille Syrjälä
Check whether the display actually has the set_update_mode() function before calling it. Only the sysfs codepath was broken, the omapfb ioctl had the necessary protection. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: DSI: Increase HS TX timeoutTomi Valkeinen
For some reason screen updates of certain odd widths seem to be triggering HS TX timeouts on OMAP 3430, even if bigger updates do not. The reason for this is unknown, but increasing the timeout removes the problem with no (so far) noticeable problems. I haven't seen this problem on OMAP 3630. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-01Linux 2.6.35Linus Torvalds
2010-08-01NFS: Fix a typo in include/linux/nfs_fs.hTrond Myklebust
nfs_commit_inode() needs to be defined irrespectively of whether or not we are supporting NFSv3 and NFSv4. Allow the compiler to optimise away code in the NFSv2-only case by converting it into an inlined stub function. Reported-and-tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-30Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: cyber2000fb: fix console in truecolor modes cyber2000fb: fix machine hang on module load SA1111: Eliminate use after free ARM: Fix Versatile/Realview/VExpress MMC card detection sense ARM: 6279/1: highmem: fix SMP preemption bug in kmap_high_l1_vipt ARM: Add barriers to io{read,write}{8,16,32} accessors as well ARM: 6273/1: Add barriers to the I/O accessors if ARM_DMA_MEM_BUFFERABLE ARM: 6272/1: Convert L2x0 to use the IO relaxed operations ARM: 6271/1: Introduce *_relaxed() I/O accessors ARM: 6275/1: ux500: don't use writeb() in uncompress.h ARM: 6270/1: clean files in arch/arm/boot/compressed/ ARM: Fix csum_partial_copy_from_user()
2010-07-30Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Ensure that writepage respects the nonblock flag NFS: kswapd must not block in nfs_release_page nfs: include space for the NUL in root path
2010-07-30Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/edid: Fix the HDTV hack sync adjustment drm/radeon/kms: fix radeon mid power profile reporting
2010-07-30mm: fix ia64 crash when gcore reads gate areaHugh Dickins
Debian's ia64 autobuilders have been seeing kernel freeze or reboot when running the gdb testsuite (Debian bug 588574): dannf bisected to 2.6.32 62eede62dafb4a6633eae7ffbeb34c60dba5e7b1 "mm: ZERO_PAGE without PTE_SPECIAL"; and reproduced it with gdb's gcore on a simple target. I'd missed updating the gate_vma handling in __get_user_pages(): that happens to use vm_normal_page() (nowadays failing on the zero page), yet reported success even when it failed to get a page - boom when access_process_vm() tried to copy that to its intermediate buffer. Fix this, resisting cleanups: in particular, leave it for now reporting success when not asked to get any pages - very probably safe to change, but let's not risk it without testing exposure. Why did ia64 crash with 16kB pages, but succeed with 64kB pages? Because setup_gate() pads each 64kB of its gate area with zero pages. Reported-by: Andreas Barth <aba@not.so.argh.org> Bisected-by: dann frazier <dannf@debian.org> Signed-off-by: Hugh Dickins <hughd@google.com> Tested-by: dann frazier <dannf@dannf.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-30CIFS: Remove __exit mark from cifs_exit_dns_resolver()David Howells
Remove the __exit mark from cifs_exit_dns_resolver() as it's called by the module init routine in case of error, and so may have been discarded during linkage. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-30cyber2000fb: fix console in truecolor modesOndrej Zary
Return value was not set to 0 in setcolreg() with truecolor modes. This causes fb_set_cmap() to abort after first color, resulting in blank palette - and blank console in 24bpp and 32bpp modes. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-30cyber2000fb: fix machine hang on module loadOndrej Zary
I was testing two CyberPro 2000 based PCI cards on x86 and the machine always hanged completely when the cyber2000fb module was loaded. It seems that the card hangs when some registers are accessed too quickly after writing RAMDAC control register. With this patch, both card work. Add delay after RAMDAC control register write to prevent hangs on module load. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-30SA1111: Eliminate use after freeJulia Lawall
__sa1111_remove always frees its argument, so the subsequent reference to sachip->saved_state represents a use after free. __sa1111_remove does not appear to use the saved_state field, so the patch simply frees it first. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E,E2; @@ __sa1111_remove(E) ... ( E = E2 | * E ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-30ARM: Fix Versatile/Realview/VExpress MMC card detection senseRussell King
The MMC card detection sense has become really confused with negations at various levels, leading to some platforms not detecting inserted cards. Fix this by converting everything to positive logic throughout, thereby getting rid of these negations. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-30ARM: 6279/1: highmem: fix SMP preemption bug in kmap_high_l1_viptGary King
smp_processor_id() must not be called from a preemptible context (this is checked by CONFIG_DEBUG_PREEMPT). kmap_high_l1_vipt() was doing so. This lead to a problem where the wrong per_cpu kmap_high_l1_vipt_depth could be incremented, causing a BUG_ON(*depth <= 0); in kunmap_high_l1_vipt(). The solution is to move the call to smp_processor_id() after the call to preempt_disable(). Originally by: Andrew Howe <ahowe@nvidia.com> Signed-off-by: Gary King <gking@nvidia.com> Acked-by: Nicolas Pitre <nico.as.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-30NFS: Ensure that writepage respects the nonblock flagTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-07-30NFS: kswapd must not block in nfs_release_pageTrond Myklebust
See https://bugzilla.kernel.org/show_bug.cgi?id=16056 If other processes are blocked waiting for kswapd to free up some memory so that they can make progress, then we cannot allow kswapd to block on those processes. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
2010-07-30nfs: include space for the NUL in root pathDan Carpenter
In root_nfs_name() it does the following: if (strlen(buf) + strlen(cp) > NFS_MAXPATHLEN) { printk(KERN_ERR "Root-NFS: Pathname for remote directory too long.\n"); return -1; } sprintf(nfs_export_path, buf, cp); In the original code if (strlen(buf) + strlen(cp) == NFS_MAXPATHLEN) then the sprintf() would lead to an overflow. Generally the rest of the code assumes that the path can have NFS_MAXPATHLEN (1024) characters and a NUL terminator so the fix is to add space to the nfs_export_path[] buffer. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-07-29Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] etr: fix clock synchronization race [S390] Fix IRQ tracing in case of PER
2010-07-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: update MAINTAINERS entry
2010-07-29Merge branch 'fix/hda' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Add a PC-beep workaround for ASUS P5-V ALSA: hda - Assume PC-beep as default for Realtek ALSA: hda - Don't register beep input device when no beep is available ALSA: hda - Fix pin-detection of Nvidia HDMI
2010-07-29CRED: Fix __task_cred()'s lockdep check and banner commentDavid Howells
Fix __task_cred()'s lockdep check by removing the following validation condition: lockdep_tasklist_lock_is_held() as commit_creds() does not take the tasklist_lock, and nor do most of the functions that call it, so this check is pointless and it can prevent detection of the RCU lock not being held if the tasklist_lock is held. Instead, add the following validation condition: task->exit_state >= 0 to permit the access if the target task is dead and therefore unable to change its own credentials. Fix __task_cred()'s comment to: (1) discard the bit that says that the caller must prevent the target task from being deleted. That shouldn't need saying. (2) Add a comment indicating the result of __task_cred() should not be passed directly to get_cred(), but rather than get_task_cred() should be used instead. Also put a note into the documentation to enforce this point there too. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-29CRED: Fix get_task_cred() and task_state() to not resurrect dead credentialsDavid Howells
It's possible for get_task_cred() as it currently stands to 'corrupt' a set of credentials by incrementing their usage count after their replacement by the task being accessed. What happens is that get_task_cred() can race with commit_creds(): TASK_1 TASK_2 RCU_CLEANER -->get_task_cred(TASK_2) rcu_read_lock() __cred = __task_cred(TASK_2) -->commit_creds() old_cred = TASK_2->real_cred TASK_2->real_cred = ... put_cred(old_cred) call_rcu(old_cred) [__cred->usage == 0] get_cred(__cred) [__cred->usage == 1] rcu_read_unlock() -->put_cred_rcu() [__cred->usage == 1] panic() However, since a tasks credentials are generally not changed very often, we can reasonably make use of a loop involving reading the creds pointer and using atomic_inc_not_zero() to attempt to increment it if it hasn't already hit zero. If successful, we can safely return the credentials in the knowledge that, even if the task we're accessing has released them, they haven't gone to the RCU cleanup code. We then change task_state() in procfs to use get_task_cred() rather than calling get_cred() on the result of __task_cred(), as that suffers from the same problem. Without this change, a BUG_ON in __put_cred() or in put_cred_rcu() can be tripped when it is noticed that the usage count is not zero as it ought to be, for example: kernel BUG at kernel/cred.c:168! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/kernel/mm/ksm/run CPU 0 Pid: 2436, comm: master Not tainted 2.6.33.3-85.fc13.x86_64 #1 0HR330/OptiPlex 745 RIP: 0010:[<ffffffff81069881>] [<ffffffff81069881>] __put_cred+0xc/0x45 RSP: 0018:ffff88019e7e9eb8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff880161514480 RCX: 00000000ffffffff RDX: 00000000ffffffff RSI: ffff880140c690c0 RDI: ffff880140c690c0 RBP: ffff88019e7e9eb8 R08: 00000000000000d0 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000040 R12: ffff880140c690c0 R13: ffff88019e77aea0 R14: 00007fff336b0a5c R15: 0000000000000001 FS: 00007f12f50d97c0(0000) GS:ffff880007400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f461bc000 CR3: 00000001b26ce000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process master (pid: 2436, threadinfo ffff88019e7e8000, task ffff88019e77aea0) Stack: ffff88019e7e9ec8 ffffffff810698cd ffff88019e7e9ef8 ffffffff81069b45 <0> ffff880161514180 ffff880161514480 ffff880161514180 0000000000000000 <0> ffff88019e7e9f28 ffffffff8106aace 0000000000000001 0000000000000246 Call Trace: [<ffffffff810698cd>] put_cred+0x13/0x15 [<ffffffff81069b45>] commit_creds+0x16b/0x175 [<ffffffff8106aace>] set_current_groups+0x47/0x4e [<ffffffff8106ac89>] sys_setgroups+0xf6/0x105 [<ffffffff81009b02>] system_call_fastpath+0x16/0x1b Code: 48 8d 71 ff e8 7e 4e 15 00 85 c0 78 0b 8b 75 ec 48 89 df e8 ef 4a 15 00 48 83 c4 18 5b c9 c3 55 8b 07 8b 07 48 89 e5 85 c0 74 04 <0f> 0b eb fe 65 48 8b 04 25 00 cc 00 00 48 3b b8 58 04 00 00 75 RIP [<ffffffff81069881>] __put_cred+0xc/0x45 RSP <ffff88019e7e9eb8> ---[ end trace df391256a100ebdd ]--- Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-29watchdog: update MAINTAINERS entryWim Van Sebroeck
Add Mailing-list and website to watchdog MAINTAINERS entry. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-07-29ALSA: hda - Add a PC-beep workaround for ASUS P5-VTakashi Iwai
ASUS P5-V provides a SSID that unexpectedly matches with the value compilant with Realtek's specification. Thus the driver interprets it badly, resulting in non-working PC beep. This patch adds a white-list for such a case; a white-list of known devices with working PC beep. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-29ARM: Add barriers to io{read,write}{8,16,32} accessors as wellRussell King
The ioread/iowrite accessors also need barriers as they're used in place of readl/writel et.al. in portable drivers. Create __iormb() and __iowmb() which are conditionally defined to be barriers dependent on ARM_DMA_MEM_BUFFERABLE, and always use these macros in the accessors. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29ARM: 6273/1: Add barriers to the I/O accessors if ARM_DMA_MEM_BUFFERABLECatalin Marinas
When the coherent DMA buffers are mapped as Normal Non-cacheable (ARM_DMA_MEM_BUFFERABLE enabled), buffer accesses are no longer ordered with Device memory accesses causing failures in device drivers that do not use the mandatory memory barriers before starting a DMA transfer. LKML discussions led to the conclusion that such barriers have to be added to the I/O accessors: http://thread.gmane.org/gmane.linux.kernel/683509/focus=686153 http://thread.gmane.org/gmane.linux.ide/46414 http://thread.gmane.org/gmane.linux.kernel.cross-arch/5250 This patch introduces a wmb() barrier to the write*() I/O accessors to handle the situations where Normal Non-cacheable writes are still in the processor (or L2 cache controller) write buffer before a DMA transfer command is issued. For the read*() accessors, a rmb() is introduced after the I/O to avoid speculative loads where the driver polls for a DMA transfer ready bit. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29ARM: 6272/1: Convert L2x0 to use the IO relaxed operationsCatalin Marinas
This patch is in preparation for a subsequent patch which adds barriers to the I/O accessors. Since the mandatory barriers may do an L2 cache sync, this patch avoids a recursive call into l2x0_cache_sync() via the write*() accessors and wmb() and a call into l2x0_cache_sync() with the l2x0_lock held. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29ARM: 6271/1: Introduce *_relaxed() I/O accessorsCatalin Marinas
This patch introduces readl*_relaxed()/write*_relaxed() as the main I/O accessors (when __mem_pci is defined). The standard read*()/write*() macros are now based on the relaxed accessors. This patch is in preparation for a subsequent patch which adds barriers to the I/O accessors. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29ARM: 6275/1: ux500: don't use writeb() in uncompress.hRabin Vincent
Don't use writeb() in uncompress.h, to avoid the following build errors when the "Add barriers to the I/O accessors" series is applied. Use __raw_writeb() instead. arch/arm/boot/compressed/misc.o: In function `putc': arch/arm/mach-ux500/include/mach/uncompress.h:41: undefined reference to `outer_cache' Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29ARM: 6270/1: clean files in arch/arm/boot/compressed/Magnus Damm
Update the compressed boot Makefile for ARM to remove files during clean. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29drm/edid: Fix the HDTV hack sync adjustmentAdam Jackson
We're adjusting horizontal timings only here, moving vsync was just a slavish translation of a typo in the X server. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-29drm/radeon/kms: fix radeon mid power profile reportingDaniel J Blueman
Fix incorrectly reporting 'default' power profile, when it is set to 'mid'. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-28Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: x86,kgdb: Fix hw breakpoint regression
2010-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] ibmvscsi: Fix oops when an interrupt is pending during probe [SCSI] zfcp: Update status read mempool [SCSI] zfcp: Do not wait for SBALs on stopped queue [SCSI] zfcp: Fix check whether unchained ct_els is possible [SCSI] ipr: fix resource path display and formatting
2010-07-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: davinci: da850/omap-l138 evm: account for DEFDCDC{2,3} being tied high regulator: tps6507x: allow driver to use DEFDCDC{2,3}_HIGH register wm8350-regulator: fix wm8350_register_regulator error handling ab3100: fix off-by-one value range checking for voltage selector
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 08:02:16 +0000