| Age | Commit message (Collapse) | Author |
|---|
|
This patch introduces support for the GRE flow spec and
allowing the creation of rules based on the protocol and
key fields that are part of GRE protocol header.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add a new MPLS steering match filter that can match against
a single MPLS tag field.
Since the MPLS header can reside in different locations in the packet's
protocol stack as well as be encapsulated with a tunnel protocol, it
is required to know the exact location of the header in the protocol
stack.
Therefore, when including the MPLS protocol spec in the specs list,
it is mandatory to provide the list in an ordered manner, so
that it represents the actual header order in a matching packet.
Drivers that process the spec list and apply the matching rule
should treat the position of the MPLS spec in the spec list as the
actual location of the MPLS label in the packet's protocol stack.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add ib_uverbs_flow_spec_mpls to define a rule to match the MPLS
protocol.
The spec includes the generic specs header, type, size and reserved
fields while the filter itself is defined as ib_uverbs_flow_mpls_filter
and includes a single 32bit field named 'label' which consists of:
Bits 0:19 - The MPLS label.
Bits 20:22 - Traffic class field.
Bit 23 - Bottom of stack bit.
Bits 24:31 - Time to live (TTL) field.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Adding a new GRE steering match filter that can match against
key and protocol fields.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add ib_uverbs_flow_spec_gre to define a rule to match the GRE
encapsulation protocol.
The spec includes the generic specs header, type, size and reserved
fields while the filter itself is defined as ib_uverbs_flow_gre_filter
and includes:
1. Checksum present bit, key present bit and version bits in a single
16bit field.
2. Protocol type field - Indicates the ether protocol type of the
encapsulated payload.
3. Key field - present if key bit is set and contains an application
specific key value.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When 'kvzalloc()' is used to allocate memory, 'kvfree()' must be used to
free it.
Fixes: 1cbe6fc86ccfe ("IB/mlx5: Add support for CQE compressing")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When 'kvzalloc()' is used to allocate memory, 'kvfree()' must be used to
free it.
Fixes: fed9ce22bf8ae ("net/mlx5: E-Switch, Add API to create vport rx rules")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When 'kvzalloc()' is used to allocate memory, 'kvfree()' must be used to
free it.
Fixes: 9efa75254593d ("net/mlx5_core: Introduce access functions to query vport RoCE fields")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
During CM request processing flow, ah_attr is initialized twice.
First based on wc. Secondly based on primary path record.
ah_attr initialization from path record can fail, which leads to ah_attr
zeroed out.
Therefore, always initialize ah_attr on stack during reinitialization
phase. If ah_attr init is successful, use the new ah_attry by
overwriting the old one. If the ah_attr init fails, continue to use the
last ah_attr.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
During CM LAP processing, ah_attr is reinitialized on receiving LAP
request. First likely during CM request processing.
ah_attr might get zero out if LAP processing fails.
Therefore, attempt to create new ah_attr for the LAP message.
If the initialization fails, continue with older ah_attr.
If the initialization passes, consider the new ah_attr by overwriting
the older one.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
AH attribute of the cm_id can be overwritten if LAP message is received
on CM request which is in progress. This bug got introduced to avoid
sleeping when spin lock is held as part of commit in Fixes tag.
Therefore validate the cm_id state first and continue to perform AV
ah_attr initialization.
Given that Aleternative path related messages are not supported for
RoCE, init_av_from_response/path is such messages are ok to be called
from blocking context.
Fixes: 33f93e1ebcf5 ("IB/cm: Fix sleeping while spin lock is held")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
If two listeners are created with different IP's but
same port, the second rdma_listen fails due to a
duplicate port entry being added from the CQP add
APBVT OP. commit f16dc0aa5ea2 ("i40iw: Add support
for port reuse on active side connections") does not
account for listener side port reuse.
Check for duplicate port before invoking the CQP command
to add APBVT entry and delete the entry only if the port
is not in use. Additionally, consolidate all port-reuse
logic into i40iw_manage_apbvt.
Fixes: f16dc0aa5ea2 ("i40iw: Add support for port reuse on active side connections")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
User-space may invoke ibv_reg_mr and ibv_dereg_mr in different threads.
If ibv_dereg_mr is called after the thread which invoked ibv_reg_mr has
exited, get_pid_task will return NULL and ib_umem_release will not
decrease mm->pinned_vm.
Instead of using threads to locate the mm, use the overall tgid from the
ib_ucontext struct instead. This matches the behavior of ODP and
disassociate in handling the mm of the process that called ibv_reg_mr.
Cc: <stable@vger.kernel.org>
Fixes: 87773dd56d54 ("IB: ib_umem_release() should decrement mm->pinned_vm from ib_umem_get")
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
"return" statement at the end of void function is redundant, removing
it.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Qing Huang <qing.huang@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Remove sq/rq wr_id attributes because typically they are pointers and
we don't want to pass up kernel pointers.
Fixes: 056f9c7f39bf ("iw_cxgb4: dump detailed driver-specific QP information")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Remove mr iova attribute because we don't want to pass up kernel pointers.
Fixes: fccec5b89ac6 ("RDMA/nldev: provide detailed MR information")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Fixes: 056f9c7f39bf ("iw_cxgb4: dump detailed driver-specific QP information")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
During this merge window, we added support for addition RDMA netlink
operations. Unfortunately, we added the items in the middle of our uapi
enum. Fix that before final release.
Fixes: da5c85078215 ("RDMA/nldev: add driver-specific resource
tracking")
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
A recent patch set to rework the usage of debugfs and to add fault
injection capabilities via debugfs files to the hfi1 driver introduced a
build error that only shows up when debugfs is fully disabled. The
patchset mistakenly defines some empty stub functions in two different
headers when debugfs is disabled. Remove the set that shouldn't have
been there to resolve the issue.
Fixes: a74d5307caba ("IB/hfi1: Rework fault injection machinery")
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
DMA_VIRT_OPS requires that dma_addr_t is at least as wide as a
pointer, which is expressed as a dependency on !64BIT ||
ARCH_DMA_ADDR_T_64BIT.
For parisc64 this is not true, and if these IB modules are enabled,
kconfig warns:
WARNING: unmet direct dependencies detected for DMA_VIRT_OPS
Depends on [n]: HAS_DMA [=y] && (!64BIT [=y] || ARCH_DMA_ADDR_T_64BIT)
Selected by [m]:
- INFINIBAND_RDMAVT [=m] && INFINIBAND [=m] && 64BIT [=y] && PCI [=y]
- RDMA_RXE [=m] && INET [=y] && PCI [=y] && INFINIBAND [=m]
Add dependencies to fix this.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into k.o/wip/dl-for-next
mlx5-updates-2018-05-07
mlx5 core driver misc cleanups and updates:
- fix spelling mistake: "modfiy" -> "modify"
- Cleanup unused field in Work Queue parameters
- dump_command mailbox length printed
- Refactor num of blocks in mailbox calculation
- Decrease level of prints about non-existent MKEY
- remove some extraneous spaces in indentations
Pulling the same update already pulled into net-next by Dave Miller.
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Moving receive-side WQE allocation logic into rdmavt will allow
further code reuse between qib and hfi1 drivers.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Currently the driver doesn't support completion vectors. These
are used to indicate which sets of CQs should be grouped together
into the same vector. A vector is a CQ processing thread that
runs on a specific CPU.
If an application has several CQs bound to different completion
vectors, and each completion vector runs on different CPUs, then
the completion queue workload is balanced. This helps scale as more
nodes are used.
Implement CQ completion vector support using a global workqueue
where a CQ entry is queued to the CPU corresponding to the CQ's
completion vector. Since the workqueue is global, it's guaranteed
to always be there when queueing CQ entries; Therefore, the RCU
locking for cq->rdi->worker in the hot path is superfluous.
Each completion vector is assigned to a different CPU. The number of
completion vectors available is computed by taking the number of
online, physical CPUs from the local NUMA node and subtracting the
CPUs used for kernel receive queues and the general interrupt.
Special use cases:
* If there are no CPUs left for completion vectors, the same CPU
for the general interrupt is used; Therefore, there would only
be one completion vector available.
* For multi-HFI systems, the number of completion vectors available
for each device is the total number of completion vectors in
the local NUMA node divided by the number of devices in the same
NUMA node. If there's a division remainder, the first device to
get initialized gets an extra completion vector.
Upon a CQ creation, an invalid completion vector could be specified.
Handle it as follows:
* If the completion vector is less than 0, set it to 0.
* Set the completion vector to the result of the passed completion
vector moded with the number of device completion vectors
available.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
CPU masks are used to keep track of affinity assignments for IRQs
and processes. Operations performed on these affinity CPU masks are
duplicated throughout the code.
Create common functions for affinity CPU mask operations to remove
duplicate code.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
All threads queuing CQ entries on different CQs are unnecessarily
synchronized by a spin lock to check if the CQ kthread worker hasn't
been destroyed before queuing an CQ entry.
The lock used in 6efaf10f163d ("IB/rdmavt: Avoid queuing work into a
destroyed cq kthread worker") is a device global lock and will have
poor performance at scale as completions are entered from a large
number of CPUs.
Convert to use RCU where the read side of RCU is rvt_cq_enter() to
determine that the worker is alive prior to triggering the
completion event.
Apply write side RCU semantics in rvt_driver_cq_init() and
rvt_cq_exit().
Fixes: 6efaf10f163d ("IB/rdmavt: Avoid queuing work into a destroyed cq kthread worker")
Cc: <stable@vger.kernel.org> # 4.14.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When Hfi1 device is unresponsive, reading the RcvArrayCnt register
will return all 1's. This value is then used to remap chip's RcvArray.
The incorrect all ones value used in remapping RcvArray
will cause warn on as shown by trace below:
[<ffffffff81685eac>] dump_stack+0x19/0x1b
[<ffffffff81085820>] warn_slowpath_common+0x70/0xb0
[<ffffffff810858bc>] warn_slowpath_fmt+0x5c/0x80
[<ffffffff81065c29>] __ioremap_caller+0x279/0x320
[<ffffffff8142873c>] ? _dev_info+0x6c/0x90
[<ffffffffa021d155>] ? hfi1_pcie_ddinit+0x1d5/0x330 [hfi1]
[<ffffffff81065d62>] ioremap_wc+0x32/0x40
[<ffffffffa021d155>] hfi1_pcie_ddinit+0x1d5/0x330 [hfi1]
[<ffffffffa0204851>] hfi1_init_dd+0x1d1/0x2440 [hfi1]
[<ffffffff813503dc>] ? pci_write_config_word+0x1c/0x20
Read CCE revision register first to verify that WFR device is
responsive. If the read return "all ones", bail out from init
and fail the driver load.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The packet fault injection code present in the HFI1 driver had some
issues which not only fragment the code but also created user
confusion. Furthermore, it suffered from the following issues:
1. The fault_packet method only worked for received packets. This
meant that the only fault injection mode available for sent
packets is fault_opcode, which did not allow for random packet
drops on all egressing packets.
2. The mask available for the fault_opcode mode did not really work
due to the fact that the opcode values are not bits in a bitmask but
rather sequential integer values. Creating a opcode/mask pair that
would successfully capture a set of packets was nearly impossible.
3. The code was fragmented and used too many debugfs entries to
operate and control. This was confusing to users.
4. It did not allow filtering fault injection on a per direction basis -
egress vs. ingress.
In order to improve or fix the above issues, the following changes have
been made:
1. The fault injection methods have been combined into a single fault
injection facility. As such, the fault injection has been plugged
into both the send and receive code paths. Regardless of method used
the fault injection will operate on both egress and ingress packets.
2. The type of fault injection - by packet or by opcode - is now controlled
by changing the boolean value of the file "opcode_mode". When the value
is set to True, fault injection is done by opcode. Otherwise, by
packet.
2. The masking ability has been removed in favor of a bitmap that holds
opcodes of interest (one bit per opcode, a total of 256 bits). This
works in tandem with the "opcode_mode" value. When the value of
"opcode_mode" is False, this bitmap is ignored. When the value is
True, the bitmap lists all opcodes to be considered for fault injection.
By default, the bitmap is empty. When the user wants to filter by opcode,
the user sets the corresponding bit in the bitmap by echo'ing the bit
position into the 'opcodes' file. This gets around the issue that the set
of opcodes does not lend itself to effective masks and allow for extremely
fine-grained filtering by opcode.
4. fault_packet and fault_opcode methods have been combined. Hence, there
is only one debugfs directory controlling the entire operation of the
fault injection machinery. This reduces the number of debugfs entries
and provides a more unified user experience.
5. A new control files - "direction" - is provided to allow the user to
control the direction of packets, which are subject to fault injection.
6. A new control file - "skip_usec" - is added that would allow the user
to specify a "timeout" during which no fault injection will occur.
In addition, the following bug fixes have been applied:
1. The fault injection code has been split into its own header and source
files. This was done to better organize the code and support conditional
compilation without littering the code with #ifdef's.
2. The method by which the TX PIO packets were being marked for drop
conflicted with the way send contexts were being setup. As a result,
the send context was repeatedly being reset.
3. The fault injection only makes sense when the user can control it
through the debugfs entries. However, a kernel configuration can
enable fault injection but keep fault injection debugfs entries
disabled. Therefore, it makes sense that the HFI fault injection
code depends on both.
4. Error suppression did not take into account the method by which PIO
packets were being dropped. Therefore, even with error suppression
turned on, errors would still be displayed to the screen. A larger
enough packet drop percentage would case the kernel to crash because
the driver would be stuck printing errors.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
A warm restart will fail to unload the driver, leaving link state
potentially flapping up to the point the BIOS resets the adapter.
Correct the issue by hooking the shutdown pci method,
which will bring port down.
Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
User send context integrity bits are cleared before the context is
disabled. If the send context is still processing data, any packets
that need those integrity bits will cause an error and halt the send
context.
During the disable handling, the driver waits for the context to drain.
If the context is halted, the driver will eventually timeout because
the context won't drain and then incorrectly bounce the link.
Reorder the bit clearing and the context disable.
Examine the software state and send context status as well as the
egress status to determine if a send context is in the halted state.
Promote the check macros to static functions for consistency with the
new check and to follow kernel style.
Remove an unused define that refers to the egress timeout.
Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The driver_pstate() function is used to map internal driver state
information to externally defined states.
The VERIFY_CAP and GOING_UP states are config/training states, but
the mapping routing returns the POLLING value.
Update the return values for VERIFY_CAP and GOING_UP to return the
correct value: TRAINING.
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
There are config dependent code paths that expose panics in unload
paths both in this file and in debugfs_remove_recursive() because
CONFIG_FAULT_INJECTION and CONFIG_FAULT_INJECTION_DEBUG_FS can be
set independently.
Having CONFIG_FAULT_INJECTION set and CONFIG_FAULT_INJECTION_DEBUG_FS
reset causes fault_create_debugfs_attr() to return an error.
The debugfs.c routines tolerate failures, but the module unload panics
dereferencing a NULL in the two exit routines. If that is fixed, the
dir passed to debugfs_remove_recursive comes from a memory location
that was freed and potentially reused causing a segfault or corrupting
memory.
Here is an example of the NULL deref panic:
[66866.286829] BUG: unable to handle kernel NULL pointer dereference at 0000000000000088
[66866.295602] IP: hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1]
[66866.301138] PGD 858496067 P4D 858496067 PUD 8433a7067 PMD 0
[66866.307452] Oops: 0000 [#1] SMP
[66866.310953] Modules linked in: hfi1(-) rdmavt rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm iw_cm ib_cm ib_core rpcsec_gss_krb5 nfsv4 dns_resolver nfsv3 nfs fscache sb_edac x86_pkg_temp_thermal intel_powerclamp vfat fat coretemp kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel iTCO_wdt iTCO_vendor_support crypto_simd mei_me glue_helper cryptd mxm_wmi ipmi_si pcspkr lpc_ich sg mei ioatdma ipmi_devintf i2c_i801 mfd_core shpchp ipmi_msghandler wmi acpi_power_meter acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2 sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt igb fb_sys_fops ttm ahci ptp crc32c_intel libahci pps_core drm dca libata i2c_algo_bit i2c_core [last unloaded: opa_vnic]
[66866.385551] CPU: 8 PID: 7470 Comm: rmmod Not tainted 4.14.0-mam-tid-rdma #2
[66866.393317] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016
[66866.405252] task: ffff88084f28c380 task.stack: ffffc90008454000
[66866.411866] RIP: 0010:hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1]
[66866.417984] RSP: 0018:ffffc90008457da0 EFLAGS: 00010202
[66866.423812] RAX: 0000000000000000 RBX: ffff880857de0000 RCX: 0000000180040001
[66866.431773] RDX: 0000000180040002 RSI: ffffea0021088200 RDI: 0000000040000000
[66866.439734] RBP: ffffc90008457da8 R08: ffff88084220e000 R09: 0000000180040001
[66866.447696] R10: 000000004220e001 R11: ffff88084220e000 R12: ffff88085a31c000
[66866.455657] R13: ffffffffa07c9820 R14: ffffffffa07c9890 R15: ffff881059d78100
[66866.463618] FS: 00007f6876047740(0000) GS:ffff88085f800000(0000) knlGS:0000000000000000
[66866.472644] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[66866.479053] CR2: 0000000000000088 CR3: 0000000856357006 CR4: 00000000001606e0
[66866.487013] Call Trace:
[66866.489747] remove_one+0x1f/0x220 [hfi1]
[66866.494221] pci_device_remove+0x39/0xc0
[66866.498596] device_release_driver_internal+0x141/0x210
[66866.504424] driver_detach+0x3f/0x80
[66866.508409] bus_remove_driver+0x55/0xd0
[66866.512784] driver_unregister+0x2c/0x50
[66866.517164] pci_unregister_driver+0x2a/0xa0
[66866.521934] hfi1_mod_cleanup+0x10/0xaa2 [hfi1]
[66866.526988] SyS_delete_module+0x171/0x250
[66866.531558] do_syscall_64+0x67/0x1b0
[66866.535644] entry_SYSCALL64_slow_path+0x25/0x25
[66866.540792] RIP: 0033:0x7f6875525c27
[66866.544777] RSP: 002b:00007ffd48528e78 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[66866.553224] RAX: ffffffffffffffda RBX: 0000000001cc01d0 RCX: 00007f6875525c27
[66866.561185] RDX: 00007f6875596000 RSI: 0000000000000800 RDI: 0000000001cc0238
[66866.569146] RBP: 0000000000000000 R08: 00007f68757e9060 R09: 00007f6875596000
[66866.577120] R10: 00007ffd48528c00 R11: 0000000000000206 R12: 00007ffd48529db4
[66866.585080] R13: 0000000000000000 R14: 0000000001cc01d0 R15: 0000000001cc0010
[66866.593040] Code: 90 0f 1f 44 00 00 48 83 3d a3 8b 03 00 00 55 48 89 e5 53 48 89 fb 74 4e 48 8d bf 18 0c 00 00 e8 9d f2 ff ff 48 8b 83 20 0c 00 00 <48> 8b b8 88 00 00 00 e8 2a 21 b3 e0 48 8b bb 20 0c 00 00 e8 0e
[66866.614127] RIP: hfi1_dbg_ibdev_exit+0x2a/0x80 [hfi1] RSP: ffffc90008457da0
[66866.621885] CR2: 0000000000000088
[66866.625618] ---[ end trace c4817425783fb092 ]---
Fix by insuring that upon failure from fault_create_debugfs_attr() the
parent pointer for the routines is always set to NULL and guards added
in the exit routines to insure that debugfs_remove_recursive() is not
called when when the parent pointer is NULL.
Fixes: 0181ce31b260 ("IB/hfi1: Add receive fault injection feature")
Cc: <stable@vger.kernel.org> # 4.14.x
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
For lid routed packets 'hop_cnt' is zero, therefore current
test is incomplete. Fix it by using local mad check for
both lid routed and direct routed MADs.
Reviewed-by: Mike Mariciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
A failure of program_rcvarray() is treated inconsistently by the
calling function. In one case the error is returned, in a second
case, the error is overwritten with EFAULT. In both cases the
code path is doing the same thing, allocating memory for groups,
so it should be consistent.
Make the error path consistent and return the error generated by
program_rcvarray().
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Fixes: 7e7a436ecb6e ("staging/hfi1: Add TID entry program function body")
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When the LCB isn't able to get any lanes operational on the
first transition into mission mode, the link transfer active
never happens and the LNI stays in the polling state indefinitely.
Reset LCB upon receiving an 8051 interrupt for LCB to try to obtain
lanes with firmware version 1.25.0 or later. Also, update the LCB
reset value in other parts of the code with a macro defined to make
the code more maintainable and rename functions with the link_width
label to link_mode to reflect the fact that those functions set and
read link related data not just the link width.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Several items of conflict have arisen between the RDMA stack's for-rc
branch and upcoming for-next work:
9fd4350ba895 ("IB/rxe: avoid double kfree_skb") directly conflicts with
2e47350789eb ("IB/rxe: optimize the function duplicate_request")
Patches already submitted by Intel for the hfi1 driver will fail to
apply cleanly without this merge
Other people on the mailing list have notified that their upcoming
patches also fail to apply cleanly without this merge
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
As most kernel RDMA ULPs, (e.g. NVMe over Fabrics in its default
"register_always=Y" mode) registers and invalidates user buffer
upon each IO.
Today the mlx5 driver is posting the registration work
request using scatter/gather entry for the MTT/KLM list.
The fetch of the MTT/KLM list becomes the bottleneck in
number of IO operation could be done by NVMe over Fabrics
host driver on a single adapter as shown below.
This patch is adding the support for inline registration
work request upon MTT/KLM list of size <=64B.
The result for NVMe over Fabrics is increase of > x3.5 for small
IOs as shown below, I expect other ULPs (e.g iSER, SRP, NFS over RDMA)
performance to be enhanced as well.
The following results were taken against a single NVMe-oF (RoCE link layer)
subsystem with a single namespace backed by null_blk using fio benchmark
(with rw=randread, numjobs=48, iodepth={16,64}, ioengine=libaio direct=1):
ConnectX-5 (pci Width x16)
---------------------------
Block Size s/g reg_wr inline reg_wr
++++++++++ +++++++++++++++ ++++++++++++++++
512B 1302.8K/34.82% 4951.9K/99.02%
1KB 1284.3K/33.86% 4232.7K/98.09%
2KB 1238.6K/34.1% 2797.5K/80.04%
4KB 1169.3K/32.46% 1941.3K/61.35%
8KB 1013.4K/30.08% 1236.6K/39.47%
16KB 695.7K/20.19% 696.9K/20.59%
32KB 350.3K/9.64% 350.6K/10.3%
64KB 175.86K/5.27% 175.9K/5.28%
ConnectX-4 (pci Width x8)
---------------------------
Block Size s/g reg_wr inline reg_wr
++++++++++ +++++++++++++++ ++++++++++++++++
512B 1285.8K/42.66% 4242.7K/98.18%
1KB 1254.1K/41.74% 3569.2K/96.00%
2KB 1185.9K/39.83% 2173.9K/75.58%
4KB 1069.4K/36.46% 1343.3K/47.47%
8KB 755.1K/27.77% 748.7K/29.14%
Tested-by: Nitzan Carmi <nitzanc@mellanox.com>
Signed-off-by: Idan Burstein <idanb@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The zgid is already provided by IB/core, so there is no need in locally
defined variable, let's drop it and reuse common one.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
_gid_table_setup_one() only performs GID table cache memory allocation,
marks entries as invalid (free) and marks the reserved entries.
At this point GID table is empty and no entries are added.
On dual port device if _gid_table_setup_one() fails to allocate the gid
table for 2nd port, there is no need to perform cleanup_gid_table_port()
to delete GID entries, as GID table is empty.
Therefore make use of existing gid_table_release_one() routine which
frees the GID table memory and avoid code duplication.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
gid_table_reserve_default() always returns zero. Make it return void and
simplify error checking.
rdma_port is already calculated, use that while calling
gid_table_reserve_default() instead of recalculating it.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The error handling path of 'c4iw_get_dma_mr()' does not free resources
in the correct order.
If an error occures, it can leak 'mhp->wr_waitp'.
Fixes: a3f12da0e99a ("iw_cxgb4: allocate wait object for each memory object")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The current code sets an affinity hint with a cpumask_t stored on the
stack. This value can then be accessed through /proc/irq/*/affinity_hint/,
causing a segfault or returning corrupt data.
Move the cpumask_t into struct i40iw_msix_vector so it is available later.
Backtrace:
BUG: unable to handle kernel paging request at ffffb16e600e7c90
IP: irq_affinity_hint_proc_show+0x60/0xf0
PGD 17c0c6d067
PUD 17c0c6e067
PMD 15d4a0e067
PTE 0
Oops: 0000 [#1] SMP
Modules linked in: ...
CPU: 3 PID: 172543 Comm: grep Tainted: G OE ... #1
Hardware name: ...
task: ffff9a5caee08000 task.stack: ffffb16e659d8000
RIP: 0010:irq_affinity_hint_proc_show+0x60/0xf0
RSP: 0018:ffffb16e659dbd20 EFLAGS: 00010086
RAX: 0000000000000246 RBX: ffffb16e659dbd20 RCX: 0000000000000000
RDX: ffffb16e600e7c90 RSI: 0000000000000003 RDI: 0000000000000046
RBP: ffffb16e659dbd88 R08: 0000000000000038 R09: 0000000000000001
R10: 0000000070803079 R11: 0000000000000000 R12: ffff9a59d1d97a00
R13: ffff9a5da47a6cd8 R14: ffff9a5da47a6c00 R15: ffff9a59d1d97a00
FS: 00007f946c31d740(0000) GS:ffff9a5dc1800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffb16e600e7c90 CR3: 00000016a4339000 CR4: 00000000007406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
seq_read+0x12d/0x430
? sched_clock_cpu+0x11/0xb0
proc_reg_read+0x48/0x70
__vfs_read+0x37/0x140
? security_file_permission+0xa0/0xc0
vfs_read+0x96/0x140
SyS_read+0x58/0xc0
do_syscall_64+0x5a/0x190
entry_SYSCALL64_slow_path+0x25/0x25
RIP: 0033:0x7f946bbc97e0
RSP: 002b:00007ffdd0c4ae08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 000000000096b000 RCX: 00007f946bbc97e0
RDX: 000000000096b000 RSI: 00007f946a2f0000 RDI: 0000000000000004
RBP: 0000000000001000 R08: 00007f946a2ef011 R09: 000000000000000a
R10: 0000000000001000 R11: 0000000000000246 R12: 00007f946a2f0000
R13: 0000000000000004 R14: 0000000000000000 R15: 00007f946a2f0000
Code: b9 08 00 00 00 49 89 c6 48 89 df 31 c0 4d 8d ae d8 00 00 00 f3 48 ab 4c 89 ef e8 6c 9a 56 00 49 8b 96 30 01 00 00 48 85 d2 74 3f <48> 8b 0a 48 89 4d 98 48 8b 4a 08 48 89 4d a0 48 8b 4a 10 48 89
RIP: irq_affinity_hint_proc_show+0x60/0xf0 RSP: ffffb16e659dbd20
CR2: ffffb16e600e7c90
Fixes: 8e06af711bf2 ("i40iw: add main, hdr, status")
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
In this switch there is a reference held on the QP. 'continue' will grab
the next event without releasing the reference, causing a leak.
Change it to 'break' to drop the reference before grabbing the next event.
Fixes: 4e9042e647ff ("i40iw: add hw and utils files")
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
A panic occurs when there is a newly-registered element on the QP/CQ MR
list waiting to be attached, but a different MR is deregistered. The
current code only checks for whether the list is empty, not whether the
element being deregistered is actually on the list.
Fix the panic by adding a boolean to track if the object is on the list.
Fixes: d37498417947 ("i40iw: add files for iwarp interface")
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When the last QP of eight QPs is not exist in
hns_roce_v1_mr_free_work_fn function, the
print for qpn of hr_qp may introduce a
calltrace for NULL pointer.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch mainly configure value for __internal_mr of mr_free_pd.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When enabled inner_pa_vld field of mpt, The pa0 and
pa1 will be valid and the hardware will use it
directly and not use base address of pbl. As a
result, it can reduce the delay.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
In order to avoid illegal use for desc_dma_addr of ring,
it needs to set it zero when free cmq desc.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When received multiply rq sge, it should tag the
invalid lkey for the last non-zero length sge
when have some sges' length are zero. This patch
fixes it.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Because hip06 hardware is not support for qp transition from
reset to reset state, it need to return errno when qp
transited from reset to reset. This patch fixes it.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When configure global param function run fail, it should directly return
and the initial flow will stop.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
