summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-01-25[POWERPC] PS3: Kill unused ps3_repository_bump_device()Geert Uytterhoeven
PS3: Kill unused routine ps3_repository_bump_device(). Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] PS3: Add repository polling loop to work around timing bugGeert Uytterhoeven
PS3: Add repository polling loop to work around timing bug On some firmware versions (e.g. 1.90), the storage device may not show up in the repository immediately after receiving the notification message. Add a small polling loop to make sure we don't miss it. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] PS3: Use the HVs storage device notification mechanism properlyGeert Uytterhoeven
The PS3 hypervisor has a storage device notification mechanism to wait until a storage device is ready. Unfortunately the storage device probing code used this mechanism in an incorrect way, needing a polling loop and handling of devices that are not yet ready. This change corrects this by: - First waiting for the reception of an asynchronous notification that a new storage device became ready, - Then looking up the storage device in the device repository. On shutdown, the storage probe thread is stopped and the storage notification device is closed using a reboot notifier. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] PS3: Add ps3_repository_find_device_by_id()Geert Uytterhoeven
The storage probe feature of the PS3 hypervisor returns device IDs. Add the corresponding repository routine ps3_repository_find_device_by_id() which can be used to retrieve the device info from the repository. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] PS3: Make bus_id and dev_id u64Geert Uytterhoeven
Change the PS3 bus_id and dev_id from type unsigned int to u64. These IDs are 64-bit in the repository, and the special storage notification device has a device ID of ULONG_MAX. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] Add definition of Cell bookmark SPRGeoff Levand
Add a definition for the Cell bookmark SPR to asm-powerpc/regs.h. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] kdump shutdown hook supportMichael Neuling
This adds hooks into the default_machine_crash_shutdown so drivers can register a function to be run in the first kernel before we hand off to the second kernel. This should only be used in exceptional circumstances, like where the device can't be reset in the second kernel alone (as is the case with eHEA). To emphasize this, the number of handles allowed to be registered is currently #def to 1. This uses the setjmp/longjmp code around the call out to the registered hooks, so any bogus exceptions we encounter will hopefully be recoverable. Tested with bogus data and instruction exceptions. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] Make setjmp/longjmp code usable outside of xmonMichael Neuling
This makes the setjmp/longjmp code used by xmon, generically available to other code. It also removes the requirement for debugger hooks to be only called on 0x300 (data storage) exception. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] Fix a couple of copyright symbolsStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] Make ibmebus use of_(un)register_driverStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] Export copy_page() on 32bitJoseph Fannin
Export copy_page() on 32-bit powerpc; unionfs needs it. Unionfs already builds as a module on 64bit powerpc, so the export is placed within an existing CONFIG_PPC32 #ifdef. Signed-off-by: Joseph Fannin <jfannin@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] Make smp_send_stop() handle panic and xmon rebootOlof Johansson
smp_send_stop() will send an IPI to all other cpus to shut them down. However, for the case of xmon-based reboots (as well as potentially some panics), the other cpus are (or might be) spinning with interrupts off, and won't take the IPI. Current code will drop us into the debugger when the IPI fails, which means we're in an infinite loop that we can't get out of without an external reset of some sort. Instead, make the smp_send_stop() IPI call path just print the warning about being unable to send IPIs, but make it return so the rest of the shutdown sequence can continue. It's not perfect, but the lesser of two evils. Also move the call_lock handling outside of smp_call_function_map so we can avoid deadlocks in smp_send_stop(). Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] Make smp_call_function_map staticOlof Johansson
smp_call_function_map should be static, and for consistency prepend it with __ like other local helper functions in the same file. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-24Merge branch 'for-2.6.25' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.25
2008-01-23[POWERPC] Add initial storcenter config file.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Andy Wilcox <andy@protium.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Add initial iomega StorCenter board port.Jon Loeliger
Use cuImage bootwrapper until U-Boot port is completed. Derived heavily from Linkstation port. Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Andy Wilcox <andy@protium.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Add StorCenter DTS first draft.Jon Loeliger
Based on the Kurobox DTS files. Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Andy Wilcox <andy@protium.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Add _nmask_and_or_msr() declartion to asm-powerpc/system.hJon Loeliger
Prevents miscellaneous users from declaring it locally. Signed-off-by: Jon Loeliger <jdl@freecale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23fs_enet: Add fixed-phy support for fs_enetJochen Friedrich
This patch adds support to use the fixed-link property of an ethernet node to fs_enet for the CONFIG_PPC_CPM_NEW_BINDING case. Signed-off-by: Jochen Friedrich <jochen@scram.de> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Vitali Bordug <vitb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 8xx: Use machine_*_initcall() hooks in platform codeGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Fix compile error if CONFIG_STX_GP3 is definedKumar Gala
cpmux is need in all cases, having wrapped by the ifndef CONFIG_STX_GP3 was causing a compile error. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Move RapidIO support code from arch/ppcKumar Gala
Do just enough to move the RapidIO support code for 85xx over from arch/ppc into arch/powerpc and make it still build. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[RAPIDIO] Fix compile error and warningKumar Gala
drivers/rapidio/rio.c: In function 'rio_get_asm': drivers/rapidio/rio.c:413: error: implicit declaration of function 'in_interrupt' drivers/rapidio/rio.c: In function 'rio_init_mports': drivers/rapidio/rio.c:480: warning: format '%8.8lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t' drivers/rapidio/rio.c:480: warning: format '%8.8lx' expects type 'long unsigned int', but argument 3 has type 'resource_size_t' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 86xx: MPC8641 HPCN - call of_platform_bus_probe()Wade Farnsworth
Call of_platform_bus_probe() on the MPC8641 HPCN, similar to what is done for other platforms. Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 86xx: Add localbus and flash nodes to mpc8641_hpcn.dtsWade Farnsworth
Add local bus, flash, and MTD partition nodes to mpc8641_hpcn.dts Also add compatible field for the soc node, so that it will be picked up by of_platform_bus_probe(). Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 8xx: adder875 - Fix flash bus-width and remove duplicate __initdataScott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: Update MPC8313e RDB defconfig for MTD, NAND, JFFS2.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: MPC8313e RDB - Add NOR flash to the device tree.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: MPC8313e RBD add NAND to device treeScott Wood
Add NAND to device tree, and call of_platform_bus_probe(). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 82xx: Embedded Planet EP8248E supportScott Wood
This board is also resold by Freescale under the names "QUICCStart MPC8248 Evaluation System" and "CWH-PPC-8248N-VE". Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 8xx: Analogue & Micro Adder875 board support.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 85xx: Respect KERNELBASE, PAGE_OFFSET, and PHYSICAL_START on e500Dale Farnsworth
The e500 MMU init code previously assumed KERNELBASE always equaled PAGE_OFFSET and PHYSICAL_START was 0. This is useful for kdump support as well as asymetric multicore. For the initial kdump support the secondary kernel will run at 32M but need access to all of memory so we bump the initial TLB up to 64M. This also matches with the forth coming ePAPR spec. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] fsl_soc: Fix get_immrbase() to use ranges, rather than reg.Scott Wood
Don't depend on the reg property as a way to determine the base of the immr space. The reg property might be defined differently for different SoC families. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Update MPC8610 HPCD to support audio driversTimur Tabi
Update the MPC8610 HPCD files to support the audio driver. Update booting-without-of.txt with information on the SSI device. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Add IPIC Kconfig optionJohn Rigby
IPIC is not just for 83xx anymore so make it a separate config option. Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Add support for mpc512x interrupts to ipicJohn Rigby
Added ipic_info entries for vectors used by 512x that were previously unused by 83xx. Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Fix carry bug in 128-bit unsigned integer addingLiu Yu
Synchronize it to the definition in include/math-emu/op-4.h for short term. Signed-off-by: Liu Yu <Yu.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 85xx: mpc85xx_ads: add in missing of_node_put()Paul Gortmaker
Add in missing of_node_put() after cpm2_pic_init(). This and other coding style cleanups as suggested by Stephen Rothwell. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] qe-uart: add support for Freescale QUICCEngine UARTTimur Tabi
Add file ucc_uart.c, a serial device driver for the Freescale QUICCEngine. Update the Kconfig and Makefile accordingly. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] QE: Add support for Freescale QUICCEngine UARTTimur Tabi
Add support for UART serial ports using a Freescale QUICCEngine. Update booting-without-of.txt to define new properties for a QE UART node. Update the MPC8323E-MDS device tree to add UCC5 as a UART. Update the QE library to support slow UCC devices and modules. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] QE: Add ability to upload QE firmwareTimur Tabi
Define the layout of a binary blob that contains a QE firmware and instructions on how to upload it. Add function qe_upload_firmware() to parse the blob and perform the actual upload. Fully define 'struct rsp' in immap_qe.h to include the actual RISC Special Registers. Added description of a new QE firmware node to booting-without-of.txt. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] fsl_soc: add support to gianfar for fixed-link propertyVitaly Bordug
fixed-link says: register new "Fixed/emulated PHY", i.e. PHY that not connected to the real MDIO bus. Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] MPC8349E-mITX: Vitesse 7385 PHY is not connected to the MDIO busVitaly Bordug
...thus use fixed-link to register proper "Fixed PHY" Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23phy/fixed.c: rework to not duplicate PHY layer functionalityVitaly Bordug
With that patch fixed.c now fully emulates MDIO bus, thus no need to duplicate PHY layer functionality. That, in turn, drastically simplifies the code, and drops down line count. As an additional bonus, now there is no need to register MDIO bus for each PHY, all emulated PHYs placed on the platform fixed MDIO bus. There is also no more need to pre-allocate PHYs via .config option, this is all now handled dynamically. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] MPC8349E-mITX: introduce localbus and pata nodesAnton Vorontsov
This patch adds localbus and pata nodes to use CF IDE interface on MPC8349E-mITX boards. Patch also adds code to probe localbus. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: USB device tree cleanupsLi Yang
Remove device_type = "usb" for 83xx SoC USB controller Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: Add MPC837x USB platform supportLi Yang
Add chip specific and board specific initialization for MPC837x USB. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: add device trees for MPC837x MDS boardLi Yang
Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Fix incorrect interrupt map on FSL reference boardsKumar Gala
The ULI based boards had the interrupt maps for USB on the ULI incorrectly set. Also, the MPC8572DS was missing the interrupt-map-mask for the 3rd PCIe controller. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_aliasKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 09:19:30 +0000