summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-08Merge tag 'usb-5.7-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.7-rc5 to resolve some reported issues: - syzbot found problems fixed - usbfs dma mapping fix - typec bugfixs - chipidea bugfix - usb4/thunderbolt fix - new device ids/quirks All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: msm: Ensure proper controller reset using role switch API usb: typec: mux: intel: Handle alt mode HPD_HIGH usb: usbfs: correct kernel->user page attribute mismatch usb: typec: intel_pmc_mux: Fix the property names USB: core: Fix misleading driver bug report USB: serial: qcserial: Add DW5816e support USB: uas: add quirk for LaCie 2Big Quadra thunderbolt: Check return value of tb_sw_read() in usb4_switch_op() USB: serial: garmin_gps: add sanity checking for data length
2020-05-08Merge tag 'drm-fixes-2020-05-08' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Another pretty normal week. I didn't get any i915 fixes yet, so next week I'd expect double the usual i915, but otherwise a bunch of amdgpu and some scattered other fixes. hdcp: - fix HDCP regression amdgpu: - Runtime PM fixes - DC fix for PPC - Misc DC fixes virtio: - fix context ordering issue sun4i: - old gcc warning fix ingenic-drm: - missing module support" * tag 'drm-fixes-2020-05-08' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Prevent dpcd reads with passive dongles drm/amd/display: fix counter in wait_for_no_pipes_pending drm/amd/display: Update DCN2.1 DV Code Revision drm: Fix HDCP failures when SRM fw is missing sun6i: dsi: fix gcc-4.8 drm: ingenic-drm: add MODULE_DEVICE_TABLE drm/virtio: create context before RESOURCE_CREATE_2D in 3D mode drm/amd/display: work around fp code being emitted outside of DC_FP_START/END drm/amdgpu/dc: Use WARN_ON_ONCE for ASSERT drm/amdgpu: drop redundant cg/pg ungate on runpm enter drm/amdgpu: move kfd suspend after ip_suspend_phase1
2020-05-08Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "14 fixes and one selftest to verify the ipc fixes herein" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: limit boost_watermark on small zones ubsan: disable UBSAN_ALIGNMENT under COMPILE_TEST mm/vmscan: remove unnecessary argument description of isolate_lru_pages() epoll: atomically remove wait entry on wake up kselftests: introduce new epoll60 testcase for catching lost wakeups percpu: make pcpu_alloc() aware of current gfp context mm/slub: fix incorrect interpretation of s->offset scripts/gdb: repair rb_first() and rb_last() eventpoll: fix missing wakeup for ovflist in ep_poll_callback arch/x86/kvm/svm/sev.c: change flag passed to GUP fast in sev_pin_memory() scripts/decodecode: fix trapping instruction formatting kernel/kcov.c: fix typos in kcov_remote_start documentation mm/page_alloc: fix watchdog soft lockups during set_zone_contiguous() mm, memcg: fix error return value of mem_cgroup_css_alloc() ipc/mqueue.c: change __do_notify() to bypass check_kill_permission()
2020-05-08Merge tag 'drm-misc-fixes-2020-05-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A few minor fixes for an ordering issue in virtio, an (old) gcc warning in sun4i, a probe issue in ingenic-drm and a regression in the HDCP support. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200507160130.id64niqgf5wsha4u@gilmour.lan
2020-05-08Merge tag 'amd-drm-fixes-5.7-2020-05-06' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.7-2020-05-06: amdgpu: - Runtime PM fixes - DC fix for PPC - Misc DC fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200506212257.3893-1-alexander.deucher@amd.com
2020-05-07Merge branch 'for-v5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem fix from James Morris: "Fix the default value of fs_context_parse_param hook" * 'for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: security: Fix the default value of fs_context_parse_param hook
2020-05-07mm: limit boost_watermark on small zonesHenry Willard
Commit 1c30844d2dfe ("mm: reclaim small amounts of memory when an external fragmentation event occurs") adds a boost_watermark() function which increases the min watermark in a zone by at least pageblock_nr_pages or the number of pages in a page block. On Arm64, with 64K pages and 512M huge pages, this is 8192 pages or 512M. It does this regardless of the number of managed pages managed in the zone or the likelihood of success. This can put the zone immediately under water in terms of allocating pages from the zone, and can cause a small machine to fail immediately due to OoM. Unlike set_recommended_min_free_kbytes(), which substantially increases min_free_kbytes and is tied to THP, boost_watermark() can be called even if THP is not active. The problem is most likely to appear on architectures such as Arm64 where pageblock_nr_pages is very large. It is desirable to run the kdump capture kernel in as small a space as possible to avoid wasting memory. In some architectures, such as Arm64, there are restrictions on where the capture kernel can run, and therefore, the space available. A capture kernel running in 768M can fail due to OoM immediately after boost_watermark() sets the min in zone DMA32, where most of the memory is, to 512M. It fails even though there is over 500M of free memory. With boost_watermark() suppressed, the capture kernel can run successfully in 448M. This patch limits boost_watermark() to boosting a zone's min watermark only when there are enough pages that the boost will produce positive results. In this case that is estimated to be four times as many pages as pageblock_nr_pages. Mel said: : There is no harm in marking it stable. Clearly it does not happen very : often but it's not impossible. 32-bit x86 is a lot less common now : which would previously have been vulnerable to triggering this easily. : ppc64 has a larger base page size but typically only has one zone. : arm64 is likely the most vulnerable, particularly when CMA is : configured with a small movable zone. Fixes: 1c30844d2dfe ("mm: reclaim small amounts of memory when an external fragmentation event occurs") Signed-off-by: Henry Willard <henry.willard@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1588294148-6586-1-git-send-email-henry.willard@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07ubsan: disable UBSAN_ALIGNMENT under COMPILE_TESTKees Cook
The documentation for UBSAN_ALIGNMENT already mentions that it should not be used on all*config builds (and for efficient-unaligned-access architectures), so just refactor the Kconfig to correctly implement this so randconfigs will stop creating insane images that freak out objtool under CONFIG_UBSAN_TRAP (due to the false positives producing functions that never return, etc). Link: http://lkml.kernel.org/r/202005011433.C42EA3E2D@keescook Fixes: 0887a7ebc977 ("ubsan: add trap instrumentation option") Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/linux-next/202004231224.D6B3B650@keescook/ Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07mm/vmscan: remove unnecessary argument description of isolate_lru_pages()Qiwu Chen
Since commit a9e7c39fa9fd9 ("mm/vmscan.c: remove 7th argument of isolate_lru_pages()"), the explanation of 'mode' argument has been unnecessary. Let's remove it. Signed-off-by: Qiwu Chen <chenqiwu@xiaomi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20200501090346.2894-1-chenqiwu@xiaomi.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07epoll: atomically remove wait entry on wake upRoman Penyaev
This patch does two things: - fixes a lost wakeup introduced by commit 339ddb53d373 ("fs/epoll: remove unnecessary wakeups of nested epoll") - improves performance for events delivery. The description of the problem is the following: if N (>1) threads are waiting on ep->wq for new events and M (>1) events come, it is quite likely that >1 wakeups hit the same wait queue entry, because there is quite a big window between __add_wait_queue_exclusive() and the following __remove_wait_queue() calls in ep_poll() function. This can lead to lost wakeups, because thread, which was woken up, can handle not all the events in ->rdllist. (in better words the problem is described here: https://lkml.org/lkml/2019/10/7/905) The idea of the current patch is to use init_wait() instead of init_waitqueue_entry(). Internally init_wait() sets autoremove_wake_function as a callback, which removes the wait entry atomically (under the wq locks) from the list, thus the next coming wakeup hits the next wait entry in the wait queue, thus preventing lost wakeups. Problem is very well reproduced by the epoll60 test case [1]. Wait entry removal on wakeup has also performance benefits, because there is no need to take a ep->lock and remove wait entry from the queue after the successful wakeup. Here is the timing output of the epoll60 test case: With explicit wakeup from ep_scan_ready_list() (the state of the code prior 339ddb53d373): real 0m6.970s user 0m49.786s sys 0m0.113s After this patch: real 0m5.220s user 0m36.879s sys 0m0.019s The other testcase is the stress-epoll [2], where one thread consumes all the events and other threads produce many events: With explicit wakeup from ep_scan_ready_list() (the state of the code prior 339ddb53d373): threads events/ms run-time ms 8 5427 1474 16 6163 2596 32 6824 4689 64 7060 9064 128 6991 18309 After this patch: threads events/ms run-time ms 8 5598 1429 16 7073 2262 32 7502 4265 64 7640 8376 128 7634 16767 (number of "events/ms" represents event bandwidth, thus higher is better; number of "run-time ms" represents overall time spent doing the benchmark, thus lower is better) [1] tools/testing/selftests/filesystems/epoll/epoll_wakeup_test.c [2] https://github.com/rouming/test-tools/blob/master/stress-epoll.c Signed-off-by: Roman Penyaev <rpenyaev@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jason Baron <jbaron@akamai.com> Cc: Khazhismel Kumykov <khazhy@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Heiher <r@hev.cc> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200430130326.1368509-2-rpenyaev@suse.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07kselftests: introduce new epoll60 testcase for catching lost wakeupsRoman Penyaev
This test case catches lost wake up introduced by commit 339ddb53d373 ("fs/epoll: remove unnecessary wakeups of nested epoll") The test is simple: we have 10 threads and 10 event fds. Each thread can harvest only 1 event. 1 producer fires all 10 events at once and waits that all 10 events will be observed by 10 threads. In case of lost wakeup epoll_wait() will timeout and 0 will be returned. Test case catches two sort of problems: forgotten wakeup on event, which hits the ->ovflist list, this problem was fixed by: 5a2513239750 ("eventpoll: fix missing wakeup for ovflist in ep_poll_callback") the other problem is when several sequential events hit the same waiting thread, thus other waiters get no wakeups. Problem is fixed in the following patch. Signed-off-by: Roman Penyaev <rpenyaev@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Khazhismel Kumykov <khazhy@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Heiher <r@hev.cc> Cc: Jason Baron <jbaron@akamai.com> Link: http://lkml.kernel.org/r/20200430130326.1368509-1-rpenyaev@suse.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07percpu: make pcpu_alloc() aware of current gfp contextFilipe Manana
Since 5.7-rc1, on btrfs we have a percpu counter initialization for which we always pass a GFP_KERNEL gfp_t argument (this happens since commit 2992df73268f78 ("btrfs: Implement DREW lock")). That is safe in some contextes but not on others where allowing fs reclaim could lead to a deadlock because we are either holding some btrfs lock needed for a transaction commit or holding a btrfs transaction handle open. Because of that we surround the call to the function that initializes the percpu counter with a NOFS context using memalloc_nofs_save() (this is done at btrfs_init_fs_root()). However it turns out that this is not enough to prevent a possible deadlock because percpu_alloc() determines if it is in an atomic context by looking exclusively at the gfp flags passed to it (GFP_KERNEL in this case) and it is not aware that a NOFS context is set. Because percpu_alloc() thinks it is in a non atomic context it locks the pcpu_alloc_mutex. This can result in a btrfs deadlock when pcpu_balance_workfn() is running, has acquired that mutex and is waiting for reclaim, while the btrfs task that called percpu_counter_init() (and therefore percpu_alloc()) is holding either the btrfs commit_root semaphore or a transaction handle (done fs/btrfs/backref.c: iterate_extent_inodes()), which prevents reclaim from finishing as an attempt to commit the current btrfs transaction will deadlock. Lockdep reports this issue with the following trace: ====================================================== WARNING: possible circular locking dependency detected 5.6.0-rc7-btrfs-next-77 #1 Not tainted ------------------------------------------------------ kswapd0/91 is trying to acquire lock: ffff8938a3b3fdc8 (&delayed_node->mutex){+.+.}, at: __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] but task is already holding lock: ffffffffb4f0dbc0 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (fs_reclaim){+.+.}: fs_reclaim_acquire.part.0+0x25/0x30 __kmalloc+0x5f/0x3a0 pcpu_create_chunk+0x19/0x230 pcpu_balance_workfn+0x56a/0x680 process_one_work+0x235/0x5f0 worker_thread+0x50/0x3b0 kthread+0x120/0x140 ret_from_fork+0x3a/0x50 -> #3 (pcpu_alloc_mutex){+.+.}: __mutex_lock+0xa9/0xaf0 pcpu_alloc+0x480/0x7c0 __percpu_counter_init+0x50/0xd0 btrfs_drew_lock_init+0x22/0x70 [btrfs] btrfs_get_fs_root+0x29c/0x5c0 [btrfs] resolve_indirect_refs+0x120/0xa30 [btrfs] find_parent_nodes+0x50b/0xf30 [btrfs] btrfs_find_all_leafs+0x60/0xb0 [btrfs] iterate_extent_inodes+0x139/0x2f0 [btrfs] iterate_inodes_from_logical+0xa1/0xe0 [btrfs] btrfs_ioctl_logical_to_ino+0xb4/0x190 [btrfs] btrfs_ioctl+0x165a/0x3130 [btrfs] ksys_ioctl+0x87/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5c/0x260 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #2 (&fs_info->commit_root_sem){++++}: down_write+0x38/0x70 btrfs_cache_block_group+0x2ec/0x500 [btrfs] find_free_extent+0xc6a/0x1600 [btrfs] btrfs_reserve_extent+0x9b/0x180 [btrfs] btrfs_alloc_tree_block+0xc1/0x350 [btrfs] alloc_tree_block_no_bg_flush+0x4a/0x60 [btrfs] __btrfs_cow_block+0x122/0x5a0 [btrfs] btrfs_cow_block+0x106/0x240 [btrfs] commit_cowonly_roots+0x55/0x310 [btrfs] btrfs_commit_transaction+0x509/0xb20 [btrfs] sync_filesystem+0x74/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x31/0x70 cleanup_mnt+0x100/0x160 task_work_run+0x93/0xc0 exit_to_usermode_loop+0xf9/0x100 do_syscall_64+0x20d/0x260 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #1 (&space_info->groups_sem){++++}: down_read+0x3c/0x140 find_free_extent+0xef6/0x1600 [btrfs] btrfs_reserve_extent+0x9b/0x180 [btrfs] btrfs_alloc_tree_block+0xc1/0x350 [btrfs] alloc_tree_block_no_bg_flush+0x4a/0x60 [btrfs] __btrfs_cow_block+0x122/0x5a0 [btrfs] btrfs_cow_block+0x106/0x240 [btrfs] btrfs_search_slot+0x50c/0xd60 [btrfs] btrfs_lookup_inode+0x3a/0xc0 [btrfs] __btrfs_update_delayed_inode+0x90/0x280 [btrfs] __btrfs_commit_inode_delayed_items+0x81f/0x870 [btrfs] __btrfs_run_delayed_items+0x8e/0x180 [btrfs] btrfs_commit_transaction+0x31b/0xb20 [btrfs] iterate_supers+0x87/0xf0 ksys_sync+0x60/0xb0 __ia32_sys_sync+0xa/0x10 do_syscall_64+0x5c/0x260 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&delayed_node->mutex){+.+.}: __lock_acquire+0xef0/0x1c80 lock_acquire+0xa2/0x1d0 __mutex_lock+0xa9/0xaf0 __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] btrfs_evict_inode+0x40d/0x560 [btrfs] evict+0xd9/0x1c0 dispose_list+0x48/0x70 prune_icache_sb+0x54/0x80 super_cache_scan+0x124/0x1a0 do_shrink_slab+0x176/0x440 shrink_slab+0x23a/0x2c0 shrink_node+0x188/0x6e0 balance_pgdat+0x31d/0x7f0 kswapd+0x238/0x550 kthread+0x120/0x140 ret_from_fork+0x3a/0x50 other info that might help us debug this: Chain exists of: &delayed_node->mutex --> pcpu_alloc_mutex --> fs_reclaim Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(pcpu_alloc_mutex); lock(fs_reclaim); lock(&delayed_node->mutex); *** DEADLOCK *** 3 locks held by kswapd0/91: #0: (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 #1: (shrinker_rwsem){++++}, at: shrink_slab+0x12f/0x2c0 #2: (&type->s_umount_key#43){++++}, at: trylock_super+0x16/0x50 stack backtrace: CPU: 1 PID: 91 Comm: kswapd0 Not tainted 5.6.0-rc7-btrfs-next-77 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x8f/0xd0 check_noncircular+0x170/0x190 __lock_acquire+0xef0/0x1c80 lock_acquire+0xa2/0x1d0 __mutex_lock+0xa9/0xaf0 __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] btrfs_evict_inode+0x40d/0x560 [btrfs] evict+0xd9/0x1c0 dispose_list+0x48/0x70 prune_icache_sb+0x54/0x80 super_cache_scan+0x124/0x1a0 do_shrink_slab+0x176/0x440 shrink_slab+0x23a/0x2c0 shrink_node+0x188/0x6e0 balance_pgdat+0x31d/0x7f0 kswapd+0x238/0x550 kthread+0x120/0x140 ret_from_fork+0x3a/0x50 This could be fixed by making btrfs pass GFP_NOFS instead of GFP_KERNEL to percpu_counter_init() in contextes where it is not reclaim safe, however that type of approach is discouraged since memalloc_[nofs|noio]_save() were introduced. Therefore this change makes pcpu_alloc() look up into an existing nofs/noio context before deciding whether it is in an atomic context or not. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Dennis Zhou <dennis@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Link: http://lkml.kernel.org/r/20200430164356.15543-1-fdmanana@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07mm/slub: fix incorrect interpretation of s->offsetWaiman Long
In a couple of places in the slub memory allocator, the code uses "s->offset" as a check to see if the free pointer is put right after the object. That check is no longer true with commit 3202fa62fb43 ("slub: relocate freelist pointer to middle of object"). As a result, echoing "1" into the validate sysfs file, e.g. of dentry, may cause a bunch of "Freepointer corrupt" error reports like the following to appear with the system in panic afterwards. ============================================================================= BUG dentry(666:pmcd.service) (Tainted: G B): Freepointer corrupt ----------------------------------------------------------------------------- To fix it, use the check "s->offset == s->inuse" in the new helper function freeptr_outside_object() instead. Also add another helper function get_info_end() to return the end of info block (inuse + free pointer if not overlapping with object). Fixes: 3202fa62fb43 ("slub: relocate freelist pointer to middle of object") Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: Vitaly Nikolenko <vnik@duasynt.com> Cc: Silvio Cesare <silvio.cesare@gmail.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Markus Elfring <Markus.Elfring@web.de> Cc: Changbin Du <changbin.du@gmail.com> Link: http://lkml.kernel.org/r/20200429135328.26976-1-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07scripts/gdb: repair rb_first() and rb_last()Aymeric Agon-Rambosson
The current implementations of the rb_first() and rb_last() gdb functions have a variable that references itself in its instanciation, which causes the function to throw an error if a specific condition on the argument is met. The original author rather intended to reference the argument and made a typo. Referring the argument instead makes the function work as intended. Signed-off-by: Aymeric Agon-Rambosson <aymeric.agon@yandex.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: Jackie Liu <liuyun01@kylinos.cn> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20200427051029.354840-1-aymeric.agon@yandex.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07eventpoll: fix missing wakeup for ovflist in ep_poll_callbackKhazhismel Kumykov
In the event that we add to ovflist, before commit 339ddb53d373 ("fs/epoll: remove unnecessary wakeups of nested epoll") we would be woken up by ep_scan_ready_list, and did no wakeup in ep_poll_callback. With that wakeup removed, if we add to ovflist here, we may never wake up. Rather than adding back the ep_scan_ready_list wakeup - which was resulting in unnecessary wakeups, trigger a wake-up in ep_poll_callback. We noticed that one of our workloads was missing wakeups starting with 339ddb53d373 and upon manual inspection, this wakeup seemed missing to me. With this patch added, we no longer see missing wakeups. I haven't yet tried to make a small reproducer, but the existing kselftests in filesystem/epoll passed for me with this patch. [khazhy@google.com: use if/elif instead of goto + cleanup suggested by Roman] Link: http://lkml.kernel.org/r/20200424190039.192373-1-khazhy@google.com Fixes: 339ddb53d373 ("fs/epoll: remove unnecessary wakeups of nested epoll") Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Roman Penyaev <rpenyaev@suse.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Roman Penyaev <rpenyaev@suse.de> Cc: Heiher <r@hev.cc> Cc: Jason Baron <jbaron@akamai.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200424025057.118641-1-khazhy@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07arch/x86/kvm/svm/sev.c: change flag passed to GUP fast in sev_pin_memory()Janakarajan Natarajan
When trying to lock read-only pages, sev_pin_memory() fails because FOLL_WRITE is used as the flag for get_user_pages_fast(). Commit 73b0140bf0fe ("mm/gup: change GUP fast to use flags rather than a write 'bool'") updated the get_user_pages_fast() call sites to use flags, but incorrectly updated the call in sev_pin_memory(). As the original coding of this call was correct, revert the change made by that commit. Fixes: 73b0140bf0fe ("mm/gup: change GUP fast to use flags rather than a write 'bool'") Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Jim Mattson <jmattson@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Mike Marshall <hubcap@omnibond.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Link: http://lkml.kernel.org/r/20200423152419.87202-1-Janakarajan.Natarajan@amd.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07scripts/decodecode: fix trapping instruction formattingIvan Delalande
If the trapping instruction contains a ':', for a memory access through segment registers for example, the sed substitution will insert the '*' marker in the middle of the instruction instead of the line address: 2b: 65 48 0f c7 0f cmpxchg16b %gs:*(%rdi) <-- trapping instruction I started to think I had forgotten some quirk of the assembly syntax before noticing that it was actually coming from the script. Fix it to add the address marker at the right place for these instructions: 28: 49 8b 06 mov (%r14),%rax 2b:* 65 48 0f c7 0f cmpxchg16b %gs:(%rdi) <-- trapping instruction 30: 0f 94 c0 sete %al Fixes: 18ff44b189e2 ("scripts/decodecode: make faulting insn ptr more robust") Signed-off-by: Ivan Delalande <colona@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20200419223653.GA31248@visor Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07kernel/kcov.c: fix typos in kcov_remote_start documentationMaciej Grochowski
Signed-off-by: Maciej Grochowski <maciej.grochowski@pm.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Link: http://lkml.kernel.org/r/20200420030259.31674-1-maciek.grochowski@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07mm/page_alloc: fix watchdog soft lockups during set_zone_contiguous()David Hildenbrand
Without CONFIG_PREEMPT, it can happen that we get soft lockups detected, e.g., while booting up. watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.6.0-next-20200331+ #4 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: __pageblock_pfn_to_page+0x134/0x1c0 Call Trace: set_zone_contiguous+0x56/0x70 page_alloc_init_late+0x166/0x176 kernel_init_freeable+0xfa/0x255 kernel_init+0xa/0x106 ret_from_fork+0x35/0x40 The issue becomes visible when having a lot of memory (e.g., 4TB) assigned to a single NUMA node - a system that can easily be created using QEMU. Inside VMs on a hypervisor with quite some memory overcommit, this is fairly easy to trigger. Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Reviewed-by: Baoquan He <bhe@redhat.com> Reviewed-by: Shile Zhang <shile.zhang@linux.alibaba.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Shile Zhang <shile.zhang@linux.alibaba.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200416073417.5003-1-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07mm, memcg: fix error return value of mem_cgroup_css_alloc()Yafang Shao
When I run my memcg testcase which creates lots of memcgs, I found there're unexpected out of memory logs while there're still enough available free memory. The error log is mkdir: cannot create directory 'foo.65533': Cannot allocate memory The reason is when we try to create more than MEM_CGROUP_ID_MAX memcgs, an -ENOMEM errno will be set by mem_cgroup_css_alloc(), but the right errno should be -ENOSPC "No space left on device", which is an appropriate errno for userspace's failed mkdir. As the errno really misled me, we should make it right. After this patch, the error log will be mkdir: cannot create directory 'foo.65533': No space left on device [akpm@linux-foundation.org: s/EBUSY/ENOSPC/, per Michal] [akpm@linux-foundation.org: s/EBUSY/ENOSPC/, per Michal] Fixes: 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs") Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Link: http://lkml.kernel.org/r/20200407063621.GA18914@dhcp22.suse.cz Link: http://lkml.kernel.org/r/1586192163-20099-1-git-send-email-laoar.shao@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07ipc/mqueue.c: change __do_notify() to bypass check_kill_permission()Oleg Nesterov
Commit cc731525f26a ("signal: Remove kernel interal si_code magic") changed the value of SI_FROMUSER(SI_MESGQ), this means that mq_notify() no longer works if the sender doesn't have rights to send a signal. Change __do_notify() to use do_send_sig_info() instead of kill_pid_info() to avoid check_kill_permission(). This needs the additional notify.sigev_signo != 0 check, shouldn't we change do_mq_notify() to deny sigev_signo == 0 ? Test-case: #include <signal.h> #include <mqueue.h> #include <unistd.h> #include <sys/wait.h> #include <assert.h> static int notified; static void sigh(int sig) { notified = 1; } int main(void) { signal(SIGIO, sigh); int fd = mq_open("/mq", O_RDWR|O_CREAT, 0666, NULL); assert(fd >= 0); struct sigevent se = { .sigev_notify = SIGEV_SIGNAL, .sigev_signo = SIGIO, }; assert(mq_notify(fd, &se) == 0); if (!fork()) { assert(setuid(1) == 0); mq_send(fd, "",1,0); return 0; } wait(NULL); mq_unlink("/mq"); assert(notified); return 0; } [manfred@colorfullife.com: 1) Add self_exec_id evaluation so that the implementation matches do_notify_parent 2) use PIDTYPE_TGID everywhere] Fixes: cc731525f26a ("signal: Remove kernel interal si_code magic") Reported-by: Yoji <yoji.fujihar.min@gmail.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Markus Elfring <elfring@users.sourceforge.net> Cc: <1vier1@web.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/e2a782e4-eab9-4f5c-c749-c07a8f7a4e66@colorfullife.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07Merge tag 'trace-v5.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Fix bootconfig causing kernels to fail with CONFIG_BLK_DEV_RAM enabled - Fix allocation leaks in bootconfig tool - Fix a double initialization of a variable - Fix API bootconfig usage from kprobe boot time events - Reject NULL location for kprobes - Fix crash caused by preempt delay module not cleaning up kthread correctly - Add vmalloc_sync_mappings() to prevent x86_64 page faults from recursively faulting from tracing page faults - Fix comment in gpu/trace kerneldoc header - Fix documentation of how to create a trace event class - Make the local tracing_snapshot_instance_cond() function static * tag 'trace-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tools/bootconfig: Fix resource leak in apply_xbc() tracing: Make tracing_snapshot_instance_cond() static tracing: Fix doc mistakes in trace sample gpu/trace: Minor comment updates for gpu_mem_total tracepoint tracing: Add a vmalloc_sync_mappings() for safe measure tracing: Wait for preempt irq delay thread to finish tracing/kprobes: Reject new event if loc is NULL tracing/boottime: Fix kprobe event API usage tracing/kprobes: Fix a double initialization typo bootconfig: Fix to remove bootconfig data from initrd while boot
2020-05-07Merge tag 'linux-kselftest-5.7-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "ftrace test fixes and a fix to kvm Makefile for relocatable native/cross builds and installs" * tag 'linux-kselftest-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: fix kvm relocatable native/cross builds and installs selftests/ftrace: Make XFAIL green color ftrace/selftest: make unresolved cases cause failure if --fail-unresolved set ftrace/selftests: workaround cgroup RT scheduling issues
2020-05-07tools/bootconfig: Fix resource leak in apply_xbc()Yunfeng Ye
Fix the @data and @fd allocations that are leaked in the error path of apply_xbc(). Link: http://lkml.kernel.org/r/583a49c9-c27a-931d-e6c2-6f63a4b18bea@huawei.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-05-07tracing: Make tracing_snapshot_instance_cond() staticZou Wei
Fix the following sparse warning: kernel/trace/trace.c:950:6: warning: symbol 'tracing_snapshot_instance_cond' was not declared. Should it be static? Link: http://lkml.kernel.org/r/1587614905-48692-1-git-send-email-zou_wei@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-05-07tracing: Fix doc mistakes in trace sampleWei Yang
As the example below shows, DECLARE_EVENT_CLASS() is used instead of DEFINE_EVENT_CLASS(). Link: http://lkml.kernel.org/r/20200428214959.11259-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-05-07gpu/trace: Minor comment updates for gpu_mem_total tracepointYiwei Zhang
This change updates the improper comment for the 'size' attribute in the tracepoint definition. Most gfx drivers pre-fault in physical pages instead of making virtual allocations. So we drop the 'Virtual' keyword here and leave this to the implementations. Link: http://lkml.kernel.org/r/20200428220825.169606-1-zzyiwei@google.com Signed-off-by: Yiwei Zhang <zzyiwei@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-05-07tracing: Add a vmalloc_sync_mappings() for safe measureSteven Rostedt (VMware)
x86_64 lazily maps in the vmalloc pages, and the way this works with per_cpu areas can be complex, to say the least. Mappings may happen at boot up, and if nothing synchronizes the page tables, those page mappings may not be synced till they are used. This causes issues for anything that might touch one of those mappings in the path of the page fault handler. When one of those unmapped mappings is touched in the page fault handler, it will cause another page fault, which in turn will cause a page fault, and leave us in a loop of page faults. Commit 763802b53a42 ("x86/mm: split vmalloc_sync_all()") split vmalloc_sync_all() into vmalloc_sync_unmappings() and vmalloc_sync_mappings(), as on system exit, it did not need to do a full sync on x86_64 (although it still needed to be done on x86_32). By chance, the vmalloc_sync_all() would synchronize the page mappings done at boot up and prevent the per cpu area from being a problem for tracing in the page fault handler. But when that synchronization in the exit of a task became a nop, it caused the problem to appear. Link: https://lore.kernel.org/r/20200429054857.66e8e333@oasis.local.home Cc: stable@vger.kernel.org Fixes: 737223fbca3b1 ("tracing: Consolidate buffer allocation code") Reported-by: "Tzvetomir Stoyanov (VMware)" <tz.stoyanov@gmail.com> Suggested-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-05-07tracing: Wait for preempt irq delay thread to finishSteven Rostedt (VMware)
Running on a slower machine, it is possible that the preempt delay kernel thread may still be executing if the module was immediately removed after added, and this can cause the kernel to crash as the kernel thread might be executing after its code has been removed. There's no reason that the caller of the code shouldn't just wait for the delay thread to finish, as the thread can also be created by a trigger in the sysfs code, which also has the same issues. Link: http://lore.kernel.org/r/5EA2B0C8.2080706@cn.fujitsu.com Cc: stable@vger.kernel.org Fixes: 793937236d1ee ("lib: Add module for testing preemptoff/irqsoff latency tracers") Reported-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Reviewed-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Reviewed-by: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-05-07Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Avoid potential NULL dereference in huge_pte_alloc() on pmd_alloc() failure" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: hugetlb: avoid potential NULL dereference
2020-05-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Bugfixes, mostly for ARM and AMD, and more documentation. Slightly bigger than usual because I couldn't send out what was pending for rc4, but there is nothing worrisome going on. I have more fixes pending for guest debugging support (gdbstub) but I will send them next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits) KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly KVM: selftests: Fix build for evmcs.h kvm: x86: Use KVM CPU capabilities to determine CR4 reserved bits KVM: VMX: Explicitly clear RFLAGS.CF and RFLAGS.ZF in VM-Exit RSB path docs/virt/kvm: Document configuring and running nested guests KVM: s390: Remove false WARN_ON_ONCE for the PQAP instruction kvm: ioapic: Restrict lazy EOI update to edge-triggered interrupts KVM: x86: Fixes posted interrupt check for IRQs delivery modes KVM: SVM: fill in kvm_run->debug.arch.dr[67] KVM: nVMX: Replace a BUG_ON(1) with BUG() to squash clang warning KVM: arm64: Fix 32bit PC wrap-around KVM: arm64: vgic-v4: Initialize GICv4.1 even in the absence of a virtual ITS KVM: arm64: Save/restore sp_el0 as part of __guest_enter KVM: arm64: Delete duplicated label in invalid_vector KVM: arm64: vgic-its: Fix memory leak on the error path of vgic_add_lpi() KVM: arm64: vgic-v3: Retire all pending LPIs on vcpu destroy KVM: arm: vgic-v2: Only use the virtual state when userspace accesses pending bits KVM: arm: vgic: Only use the virtual state when userspace accesses enable bits KVM: arm: vgic: Synchronize the whole guest on GIC{D,R}_I{S,C}ACTIVER read KVM: arm64: PSCI: Forbid 64bit functions for 32bit guests ...
2020-05-07Merge tag 'configfs-for-5.7' of git://git.infradead.org/users/hch/configfsLinus Torvalds
Pull configfs fix from Christoph Hellwig: "Fix a refcount leak in configfs_rmdir (Xiyu Yang)" * tag 'configfs-for-5.7' of git://git.infradead.org/users/hch/configfs: configfs: fix config_item refcnt leak in configfs_rmdir()
2020-05-07arm64: hugetlb: avoid potential NULL dereferenceMark Rutland
The static analyzer in GCC 10 spotted that in huge_pte_alloc() we may pass a NULL pmdp into pte_alloc_map() when pmd_alloc() returns NULL: | CC arch/arm64/mm/pageattr.o | CC arch/arm64/mm/hugetlbpage.o | from arch/arm64/mm/hugetlbpage.c:10: | arch/arm64/mm/hugetlbpage.c: In function ‘huge_pte_alloc’: | ./arch/arm64/include/asm/pgtable-types.h:28:24: warning: dereference of NULL ‘pmdp’ [CWE-690] [-Wanalyzer-null-dereference] | ./arch/arm64/include/asm/pgtable.h:436:26: note: in expansion of macro ‘pmd_val’ | arch/arm64/mm/hugetlbpage.c:242:10: note: in expansion of macro ‘pte_alloc_map’ | |arch/arm64/mm/hugetlbpage.c:232:10: | |./arch/arm64/include/asm/pgtable-types.h:28:24: | ./arch/arm64/include/asm/pgtable.h:436:26: note: in expansion of macro ‘pmd_val’ | arch/arm64/mm/hugetlbpage.c:242:10: note: in expansion of macro ‘pte_alloc_map’ This can only occur when the kernel cannot allocate a page, and so is unlikely to happen in practice before other systems start failing. We can avoid this by bailing out if pmd_alloc() fails, as we do earlier in the function if pud_alloc() fails. Fixes: 66b3923a1a0f ("arm64: hugetlb: add support for PTE contiguous bit") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reported-by: Kyrill Tkachov <kyrylo.tkachov@arm.com> Cc: <stable@vger.kernel.org> # 4.5.x- Cc: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-05-07usb: chipidea: msm: Ensure proper controller reset using role switch APIBryan O'Donoghue
Currently we check to make sure there is no error state on the extcon handle for VBUS when writing to the HS_PHY_GENCONFIG_2 register. When using the USB role-switch API we still need to write to this register absent an extcon handle. This patch makes the appropriate update to ensure the write happens if role-switching is true. Fixes: 05559f10ed79 ("usb: chipidea: add role switch class support") Cc: stable <stable@vger.kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200507004918.25975-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix reference count leaks in various parts of batman-adv, from Xiyu Yang. 2) Update NAT checksum even when it is zero, from Guillaume Nault. 3) sk_psock reference count leak in tls code, also from Xiyu Yang. 4) Sanity check TCA_FQ_CODEL_DROP_BATCH_SIZE netlink attribute in fq_codel, from Eric Dumazet. 5) Fix panic in choke_reset(), also from Eric Dumazet. 6) Fix VLAN accel handling in bnxt_fix_features(), from Michael Chan. 7) Disallow out of range quantum values in sch_sfq, from Eric Dumazet. 8) Fix crash in x25_disconnect(), from Yue Haibing. 9) Don't pass pointer to local variable back to the caller in nf_osf_hdr_ctx_init(), from Arnd Bergmann. 10) Wireguard should use the ECN decap helper functions, from Toke Høiland-Jørgensen. 11) Fix command entry leak in mlx5 driver, from Moshe Shemesh. 12) Fix uninitialized variable access in mptcp's subflow_syn_recv_sock(), from Paolo Abeni. 13) Fix unnecessary out-of-order ingress frame ordering in macsec, from Scott Dial. 14) IPv6 needs to use a global serial number for dst validation just like ipv4, from David Ahern. 15) Fix up PTP_1588_CLOCK deps, from Clay McClure. 16) Missing NLM_F_MULTI flag in gtp driver netlink messages, from Yoshiyuki Kurauchi. 17) Fix a regression in that dsa user port errors should not be fatal, from Florian Fainelli. 18) Fix iomap leak in enetc driver, from Dejin Zheng. 19) Fix use after free in lec_arp_clear_vccs(), from Cong Wang. 20) Initialize protocol value earlier in neigh code paths when generating events, from Roman Mashak. 21) netdev_update_features() must be called with RTNL mutex in macsec driver, from Antoine Tenart. 22) Validate untrusted GSO packets even more strictly, from Willem de Bruijn. 23) Wireguard decrypt worker needs a cond_resched(), from Jason Donenfeld. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits) net: flow_offload: skip hw stats check for FLOW_ACTION_HW_STATS_DONT_CARE MAINTAINERS: put DYNAMIC INTERRUPT MODERATION in proper order wireguard: send/receive: use explicit unlikely branch instead of implicit coalescing wireguard: selftests: initalize ipv6 members to NULL to squelch clang warning wireguard: send/receive: cond_resched() when processing worker ringbuffers wireguard: socket: remove errant restriction on looping to self wireguard: selftests: use normal kernel stack size on ppc64 net: ethernet: ti: am65-cpsw-nuss: fix irqs type ionic: Use debugfs_create_bool() to export bool net: dsa: Do not leave DSA master with NULL netdev_ops net: dsa: remove duplicate assignment in dsa_slave_add_cls_matchall_mirred net: stricter validation of untrusted gso packets seg6: fix SRH processing to comply with RFC8754 net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms net: dsa: ocelot: the MAC table on Felix is twice as large net: dsa: sja1105: the PTP_CLK extts input reacts on both edges selftests: net: tcp_mmap: fix SO_RCVLOWAT setting net: hsr: fix incorrect type usage for protocol variable net: macsec: fix rtnl locking issue net: mvpp2: cls: Prevent buffer overflow in mvpp2_ethtool_cls_rule_del() ...
2020-05-06net: flow_offload: skip hw stats check for FLOW_ACTION_HW_STATS_DONT_CAREPablo Neira Ayuso
This patch adds FLOW_ACTION_HW_STATS_DONT_CARE which tells the driver that the frontend does not need counters, this hw stats type request never fails. The FLOW_ACTION_HW_STATS_DISABLED type explicitly requests the driver to disable the stats, however, if the driver cannot disable counters, it bails out. TCA_ACT_HW_STATS_* maintains the 1:1 mapping with FLOW_ACTION_HW_STATS_* except by disabled which is mapped to FLOW_ACTION_HW_STATS_DISABLED (this is 0 in tc). Add tc_act_hw_stats() to perform the mapping between TCA_ACT_HW_STATS_* and FLOW_ACTION_HW_STATS_*. Fixes: 319a1d19471e ("flow_offload: check for basic action hw stats type") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06MAINTAINERS: put DYNAMIC INTERRUPT MODERATION in proper orderLukas Bulwahn
Commit 9b038086f06b ("docs: networking: convert DIM to RST") added a new file entry to DYNAMIC INTERRUPT MODERATION to the end, and not following alphabetical order. So, ./scripts/checkpatch.pl -f MAINTAINERS complains: WARNING: Misordered MAINTAINERS entry - list file patterns in alphabetic order #5966: FILE: MAINTAINERS:5966: +F: lib/dim/ +F: Documentation/networking/net_dim.rst Reorder the file entries to keep MAINTAINERS nicely ordered. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06Merge branch 'wireguard-fixes'David S. Miller
Jason A. Donenfeld says: ==================== wireguard fixes for 5.7-rc5 With Ubuntu and Debian having backported this into their kernels, we're finally seeing testing from places we hadn't seen prior, which is nice. With that comes more fixes: 1) The CI for PPC64 was running with extremely small stacks for 64-bit, causing spurious crashes in surprising places. 2) There's was an old leftover routing loop restriction, which no longer makes sense given the queueing architecture, and was causing problems for people who really did want nested routing. 3) Not yielding our kthread on CONFIG_PREEMPT_VOLUNTARY systems caused RCU stalls and other issues, reported by Wang Jian, with the fix suggested by Sultan Alsawaf. 4) Clang spewed warnings in a selftest for CONFIG_IPV6=n, reported by Arnd Bergmann. 5) A complicated if statement was simplified to an assignment while also making the likely/unlikely hinting more correct and simple, and increasing readability, suggested by Sultan. Patches (2) and (3) have Fixes: lines and are probably good candidates for stable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06wireguard: send/receive: use explicit unlikely branch instead of implicit ↵Jason A. Donenfeld
coalescing It's very unlikely that send will become true. It's nearly always false between 0 and 120 seconds of a session, and in most cases becomes true only between 120 and 121 seconds before becoming false again. So, unlikely(send) is clearly the right option here. What happened before was that we had this complex boolean expression with multiple likely and unlikely clauses nested. Since this is evaluated left-to-right anyway, the whole thing got converted to unlikely. So, we can clean this up to better represent what's going on. The generated code is the same. Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06wireguard: selftests: initalize ipv6 members to NULL to squelch clang warningJason A. Donenfeld
Without setting these to NULL, clang complains in certain configurations that have CONFIG_IPV6=n: In file included from drivers/net/wireguard/ratelimiter.c:223: drivers/net/wireguard/selftest/ratelimiter.c:173:34: error: variable 'skb6' is uninitialized when used here [-Werror,-Wuninitialized] ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count); ^~~~ drivers/net/wireguard/selftest/ratelimiter.c:123:29: note: initialize the variable 'skb6' to silence this warning struct sk_buff *skb4, *skb6; ^ = NULL drivers/net/wireguard/selftest/ratelimiter.c:173:40: error: variable 'hdr6' is uninitialized when used here [-Werror,-Wuninitialized] ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count); ^~~~ drivers/net/wireguard/selftest/ratelimiter.c:125:22: note: initialize the variable 'hdr6' to silence this warning struct ipv6hdr *hdr6; ^ We silence this warning by setting the variables to NULL as the warning suggests. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06wireguard: send/receive: cond_resched() when processing worker ringbuffersJason A. Donenfeld
Users with pathological hardware reported CPU stalls on CONFIG_ PREEMPT_VOLUNTARY=y, because the ringbuffers would stay full, meaning these workers would never terminate. That turned out not to be okay on systems without forced preemption, which Sultan observed. This commit adds a cond_resched() to the bottom of each loop iteration, so that these workers don't hog the core. Note that we don't need this on the napi poll worker, since that terminates after its budget is expended. Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com> Reported-by: Wang Jian <larkwang@gmail.com> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06wireguard: socket: remove errant restriction on looping to selfJason A. Donenfeld
It's already possible to create two different interfaces and loop packets between them. This has always been possible with tunnels in the kernel, and isn't specific to wireguard. Therefore, the networking stack already needs to deal with that. At the very least, the packet winds up exceeding the MTU and is discarded at that point. So, since this is already something that happens, there's no need to forbid the not very exceptional case of routing a packet back to the same interface; this loop is no different than others, and we shouldn't special case it, but rather rely on generic handling of loops in general. This also makes it easier to do interesting things with wireguard such as onion routing. At the same time, we add a selftest for this, ensuring that both onion routing works and infinite routing loops do not crash the kernel. We also add a test case for wireguard interfaces nesting packets and sending traffic between each other, as well as the loop in this case too. We make sure to send some throughput-heavy traffic for this use case, to stress out any possible recursion issues with the locks around workqueues. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06wireguard: selftests: use normal kernel stack size on ppc64Jason A. Donenfeld
While at some point it might have made sense to be running these tests on ppc64 with 4k stacks, the kernel hasn't actually used 4k stacks on 64-bit powerpc in a long time, and more interesting things that we test don't really work when we deviate from the default (16k). So, we stop pushing our luck in this commit, and return to the default instead of the minimum. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: ethernet: ti: am65-cpsw-nuss: fix irqs typeGrygorii Strashko
The K3 INTA driver, which is source TX/RX IRQs for CPSW NUSS, defines IRQs triggering type as EDGE by default, but triggering type for CPSW NUSS TX/RX IRQs has to be LEVEL as the EDGE triggering type may cause unnecessary IRQs triggering and NAPI scheduling for empty queues. It was discovered with RT-kernel. Fix it by explicitly specifying CPSW NUSS TX/RX IRQ type as IRQF_TRIGGER_HIGH. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06ionic: Use debugfs_create_bool() to export boolGeert Uytterhoeven
Currently bool ionic_cq.done_color is exported using debugfs_create_u8(), which requires a cast, preventing further compiler checks. Fix this by switching to debugfs_create_bool(), and dropping the cast. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: dsa: Do not leave DSA master with NULL netdev_opsFlorian Fainelli
When ndo_get_phys_port_name() for the CPU port was added we introduced an early check for when the DSA master network device in dsa_master_ndo_setup() already implements ndo_get_phys_port_name(). When we perform the teardown operation in dsa_master_ndo_teardown() we would not be checking that cpu_dp->orig_ndo_ops was successfully allocated and non-NULL initialized. With network device drivers such as virtio_net, this leads to a NPD as soon as the DSA switch hanging off of it gets torn down because we are now assigning the virtio_net device's netdev_ops a NULL pointer. Fixes: da7b9e9b00d4 ("net: dsa: Add ndo_get_phys_port_name() for CPU port") Reported-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Allen Pais <allen.pais@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: dsa: remove duplicate assignment in dsa_slave_add_cls_matchall_mirredVladimir Oltean
This was caused by a poor merge conflict resolution on my side. The "act = &cls->rule->action.entries[0];" assignment was already present in the code prior to the patch mentioned below. Fixes: e13c2075280e ("net: dsa: refactor matchall mirred action to separate function") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: stricter validation of untrusted gso packetsWillem de Bruijn
Syzkaller again found a path to a kernel crash through bad gso input: a packet with transport header extending beyond skb_headlen(skb). Tighten validation at kernel entry: - Verify that the transport header lies within the linear section. To avoid pulling linux/tcp.h, verify just sizeof tcphdr. tcp_gso_segment will call pskb_may_pull (th->doff * 4) before use. - Match the gso_type against the ip_proto found by the flow dissector. Fixes: bfd5f4a3d605 ("packet: Add GSO/csum offload support.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06seg6: fix SRH processing to comply with RFC8754Ahmed Abdelsalam
The Segment Routing Header (SRH) which defines the SRv6 dataplane is defined in RFC8754. RFC8754 (section 4.1) defines the SR source node behavior which encapsulates packets into an outer IPv6 header and SRH. The SR source node encodes the full list of Segments that defines the packet path in the SRH. Then, the first segment from list of Segments is copied into the Destination address of the outer IPv6 header and the packet is sent to the first hop in its path towards the destination. If the Segment list has only one segment, the SR source node can omit the SRH as he only segment is added in the destination address. RFC8754 (section 4.1.1) defines the Reduced SRH, when a source does not require the entire SID list to be preserved in the SRH. A reduced SRH does not contain the first segment of the related SR Policy (the first segment is the one already in the DA of the IPv6 header), and the Last Entry field is set to n-2, where n is the number of elements in the SR Policy. RFC8754 (section 4.3.1.1) defines the SRH processing and the logic to validate the SRH (S09, S10, S11) which works for both reduced and non-reduced behaviors. This patch updates seg6_validate_srh() to validate the SRH as per RFC8754. Signed-off-by: Ahmed Abdelsalam <ahabdels@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06Merge branch 'FDB-fixes-for-Felix-and-Ocelot-switches'David S. Miller
Vladimir Oltean says: ==================== FDB fixes for Felix and Ocelot switches This series fixes the following problems: - Dynamically learnt addresses never expiring (neither for Ocelot nor for Felix) - Half of the FDB not visible in 'bridge fdb show' (for Felix only) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>