summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-02perf/x86: Add constraint to create guest LBR event without hw counterLike Xu
The hypervisor may request the perf subsystem to schedule a time window to directly access the LBR records msrs for its own use. Normally, it would create a guest LBR event with callstack mode enabled, which is scheduled along with other ordinary LBR events on the host but in an exclusive way. To avoid wasting a counter for the guest LBR event, the perf tracks its hw->idx via INTEL_PMC_IDX_FIXED_VLBR and assigns it with a fake VLBR counter with the help of new vlbr_constraint. As with the BTS event, there is actually no hardware counter assigned for the guest LBR event. Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200514083054.62538-5-like.xu@linux.intel.com
2020-07-02perf/x86/lbr: Add interface to get LBR informationLike Xu
The LBR records msrs are model specific. The perf subsystem has already obtained the base addresses of LBR records based on the cpu model. Therefore, an interface is added to allow callers outside the perf subsystem to obtain these LBR information. It's useful for hypervisors to emulate the LBR feature for guests with less code. Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200613080958.132489-4-like.xu@linux.intel.com
2020-07-02perf/x86/core: Refactor hw->idx checks and cleanupLike Xu
For intel_pmu_en/disable_event(), reorder the branches checks for hw->idx and make them sorted by probability: gp,fixed,bts,others. Clean up the x86_assign_hw_event() by converting multiple if-else statements to a switch statement. To skip x86_perf_event_update() and x86_perf_event_set_period(), it's generic to replace "idx == INTEL_PMC_IDX_FIXED_BTS" check with '!hwc->event_base' because that should be 0 for all non-gp/fixed cases. Wrap related bit operations into intel_set/clear_masks() and make the main path more cleaner and readable. No functional changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Original-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200613080958.132489-3-like.xu@linux.intel.com
2020-07-02perf/x86: Fix variable types for LBR registersWei Wang
The MSR variable type can be 'unsigned int', which uses less memory than the longer 'unsigned long'. Fix 'struct x86_pmu' for that. The lbr_nr won't be a negative number, so make it 'unsigned int' as well. Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200613080958.132489-2-like.xu@linux.intel.com
2020-06-28Linux 5.8-rc3Linus Torvalds
2020-06-28Merge tag 'arm-omap-fixes-5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM OMAP fixes from Arnd Bergmann: "The OMAP developers are particularly active at hunting down regressions, so this is a separate branch with OMAP specific fixes for v5.8: As Tony explains "The recent display subsystem (DSS) related platform data changes caused display related regressions for suspend and resume. Looks like I only tested suspend and resume before dropping the legacy platform data, and forgot to test it after dropping it. Turns out the main issue was that we no longer have platform code calling pm_runtime_suspend for DSS like we did for the legacy platform data case, and that fix is still being discussed on the dri-devel list and will get merged separately. The DSS related testing exposed a pile other other display related issues that also need fixing though": - Fix ti-sysc optional clock handling and reset status checks for devices that reset automatically in idle like DSS - Ignore ti-sysc clockactivity bit unless separately requested to avoid unexpected performance issues - Init ti-sysc framedonetv_irq to true and disable for am4 - Avoid duplicate DSS reset for legacy mode with dts data - Remove LCD timings for am4 as they cause warnings now that we're using generic panels Other OMAP changes from Tony include: - Fix omap_prm reset deassert as we still have drivers setting the pm_runtime_irq_safe() flag - Flush posted write for ti-sysc enable and disable - Fix droid4 spi related errors with spi flags - Fix am335x USB range and a typo for softreset - Fix dra7 timer nodes for clocks for IPU and DSP - Drop duplicate mailboxes after mismerge for dra7 - Prevent pocketgeagle header line signal from accidentally setting micro-SD write protection signal by removing the default mux - Fix NFSroot flakeyness after resume for duover by switching the smsc911x gpio interrupt to back to level sensitive - Fix regression for omap4 clockevent source after recent system timer changes - Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid" phy-mode - One patch to convert am3/am4 DT files to use the regular sdhci-omap driver instead of the old hsmmc driver, this was meant for the merge window but got lost in the process" * tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits) ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode ARM: dts: Fix omap4 system timer source clocks ARM: dts: Fix duovero smsc interrupt for suspend ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect Revert "bus: ti-sysc: Increase max softreset wait" ARM: dts: am437x-epos-evm: remove lcd timings ARM: dts: am437x-gp-evm: remove lcd timings ARM: dts: am437x-sk-evm: remove lcd timings ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag ARM: dts: Fix am33xx.dtsi USB ranges length bus: ti-sysc: Increase max softreset wait ARM: OMAP2+: Fix legacy mode dss_reset bus: ti-sysc: Fix uninitialized framedonetv_irq bus: ti-sysc: Ignore clockactivity unless specified as a quirk bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit ARM: dts: omap4-droid4: Fix spi configuration and increase rate bus: ti-sysc: Flush posted write on enable and disable soc: ti: omap-prm: use atomic iopoll instead of sleeping one ...
2020-06-28Merge tag 'arm-fixes-5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Here are a couple of bug fixes, mostly for devicetree files NXP i.MX: - Use correct voltage on some i.MX8M board device trees to avoid hardware damage - Code fixes for a compiler warning and incorrect reference counting, both harmless. - Fix the i.MX8M SoC driver to correctly identify imx8mp - Fix watchdog configuration in imx6ul-kontron device tree. Broadcom: - A small regression fix for the Raspberry-Pi firmware driver - A Kconfig change to use the correct timer driver on Northstar - A DT fix for the Luxul XWC-2000 machine - Two more DT fixes for NSP SoCs STmicroelectronics STI - Revert one broken patch for L2 cache configuration ARM Versatile Express: - Fix a regression by reverting a broken DT cleanup TEE drivers: - MAINTAINERS: change tee mailing list" * tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: Revert "ARM: sti: Implement dummy L2 cache's write_sec" soc: imx8m: fix build warning ARM: imx6: add missing put_device() call in imx6q_suspend_init() ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() soc: imx8m: Correct i.MX8MP UID fuse offset ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range ARM: dts: NSP: Correct FA2 mailbox node ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision() MAINTAINERS: change tee mailing list ARM: dts: NSP: Disable PL330 by default, add dma-coherent property ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000 arm: dts: vexpress: Move mcc node back into motherboard node
2020-06-28Merge tag 'timers-urgent-2020-06-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "A single DocBook fix" * tag 'timers-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Fix kerneldoc system_device_crosststamp & al
2020-06-28Merge tag 'perf-urgent-2020-06-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Ingo Molnar: "A single Kbuild dependency fix" * tag 'perf-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Fix RAPL config variable bug
2020-06-28Merge tag 'efi-urgent-2020-06-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: - Fix build regression on v4.8 and older - Robustness fix for TPM log parsing code - kobject refcount fix for the ESRT parsing code - Two efivarfs fixes to make it behave more like an ordinary file system - Style fixup for zero length arrays - Fix a regression in path separator handling in the initrd loader - Fix a missing prototype warning - Add some kerneldoc headers for newly introduced stub routines - Allow support for SSDT overrides via EFI variables to be disabled - Report CPU mode and MMU state upon entry for 32-bit ARM - Use the correct stack pointer alignment when entering from mixed mode * tag 'efi-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub: arm: Print CPU boot mode and MMU state at boot efi/libstub: arm: Omit arch specific config table matching array on arm64 efi/x86: Setup stack correctly for efi_pe_entry efi: Make it possible to disable efivar_ssdt entirely efi/libstub: Descriptions for stub helper functions efi/libstub: Fix path separator regression efi/libstub: Fix missing-prototype warning for skip_spaces() efi: Replace zero-length array and use struct_size() helper efivarfs: Don't return -EINTR when rate-limiting reads efivarfs: Update inode modification time for successful writes efi/esrt: Fix reference count leak in esre_create_sysfs_entry. efi/tpm: Verify event log header before parsing efi/x86: Fix build with gcc 4
2020-06-28Merge tag 'sched_urgent_for_5.8_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: "The most anticipated fix in this pull request is probably the horrible build fix for the RANDSTRUCT fail that didn't make -rc2. Also included is the cleanup that removes those BUILD_BUG_ON()s and replaces it with ugly unions. Also included is the try_to_wake_up() race fix that was first triggered by Paul's RCU-torture runs, but was independently hit by Dave Chinner's fstest runs as well" * tag 'sched_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cfs: change initial value of runnable_avg smp, irq_work: Continue smp_call_function*() and irq_work*() integration sched/core: s/WF_ON_RQ/WQ_ON_CPU/ sched/core: Fix ttwu() race sched/core: Fix PI boosting between RT and DEADLINE tasks sched/deadline: Initialize ->dl_boosted sched/core: Check cpus_mask, not cpus_ptr in __set_cpus_allowed_ptr(), to fix mask corruption sched/core: Fix CONFIG_GCC_PLUGIN_RANDSTRUCT build fail
2020-06-28Merge tag 'x86_urgent_for_5.8_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - AMD Memory bandwidth counter width fix, by Babu Moger. - Use the proper length type in the 32-bit truncate() syscall variant, by Jiri Slaby. - Reinit IA32_FEAT_CTL during wakeup to fix the case where after resume, VMXON would #GP due to VMX not being properly enabled, by Sean Christopherson. - Fix a static checker warning in the resctrl code, by Dan Carpenter. - Add a CR4 pinning mask for bits which cannot change after boot, by Kees Cook. - Align the start of the loop of __clear_user() to 16 bytes, to improve performance on AMD zen1 and zen2 microarchitectures, by Matt Fleming. * tag 'x86_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm/64: Align start of __clear_user() loop to 16-bytes x86/cpu: Use pinning mask for CR4 bits needing to be 0 x86/resctrl: Fix a NULL vs IS_ERR() static checker warning in rdt_cdp_peer_get() x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup syscalls: Fix offset type of ksys_ftruncate() x86/resctrl: Fix memory bandwidth counter width for AMD
2020-06-28Merge tag 'rcu_urgent_for_5.8_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU-vs-KCSAN fixes from Borislav Petkov: "A single commit that uses "arch_" atomic operations to avoid the instrumentation that comes with the non-"arch_" versions. In preparation for that commit, it also has another commit that makes these "arch_" atomic operations available to generic code. Without these commits, KCSAN uses can see pointless errors" * tag 'rcu_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Fixup noinstr warnings locking/atomics: Provide the arch_atomic_ interface to generic code
2020-06-28Merge tag 'objtool_urgent_for_5.8_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Borislav Petkov: "Three fixes from Peter Zijlstra suppressing KCOV instrumentation in noinstr sections. Peter Zijlstra says: "Address KCOV vs noinstr. There is no function attribute to selectively suppress KCOV instrumentation, instead teach objtool to NOP out the calls in noinstr functions" This cures a bunch of KCOV crashes (as used by syzcaller)" * tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix noinstr vs KCOV objtool: Provide elf_write_{insn,reloc}() objtool: Clean up elf_write() condition
2020-06-28Merge tag 'x86_entry_for_5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 entry fixes from Borislav Petkov: "This is the x86/entry urgent pile which has accumulated since the merge window. It is not the smallest but considering the almost complete entry core rewrite, the amount of fixes to follow is somewhat higher than usual, which is to be expected. Peter Zijlstra says: 'These patches address a number of instrumentation issues that were found after the x86/entry overhaul. When combined with rcu/urgent and objtool/urgent, these patches make UBSAN/KASAN/KCSAN happy again. Part of making this all work is bumping the minimum GCC version for KASAN builds to gcc-8.3, the reason for this is that the __no_sanitize_address function attribute is broken in GCC releases before that. No known GCC version has a working __no_sanitize_undefined, however because the only noinstr violation that results from this happens when an UB is found, we treat it like WARN. That is, we allow it to violate the noinstr rules in order to get the warning out'" * tag 'x86_entry_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry: Fix #UD vs WARN more x86/entry: Increase entry_stack size to a full page x86/entry: Fixup bad_iret vs noinstr objtool: Don't consider vmlinux a C-file kasan: Fix required compiler version compiler_attributes.h: Support no_sanitize_undefined check with GCC 4 x86/entry, bug: Comment the instrumentation_begin() usage for WARN() x86/entry, ubsan, objtool: Whitelist __ubsan_handle_*() x86/entry, cpumask: Provide non-instrumented variant of cpu_is_offline() compiler_types.h: Add __no_sanitize_{address,undefined} to noinstr kasan: Bump required compiler version x86, kcsan: Add __no_kcsan to noinstr kcsan: Remove __no_kcsan_or_inline x86, kcsan: Remove __no_kcsan_or_inline usage
2020-06-28sched/cfs: change initial value of runnable_avgVincent Guittot
Some performance regression on reaim benchmark have been raised with commit 070f5e860ee2 ("sched/fair: Take into account runnable_avg to classify group") The problem comes from the init value of runnable_avg which is initialized with max value. This can be a problem if the newly forked task is finally a short task because the group of CPUs is wrongly set to overloaded and tasks are pulled less agressively. Set initial value of runnable_avg equals to util_avg to reflect that there is no waiting time so far. Fixes: 070f5e860ee2 ("sched/fair: Take into account runnable_avg to classify group") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200624154422.29166-1-vincent.guittot@linaro.org
2020-06-28smp, irq_work: Continue smp_call_function*() and irq_work*() integrationPeter Zijlstra
Instead of relying on BUG_ON() to ensure the various data structures line up, use a bunch of horrible unions to make it all automatic. Much of the union magic is to ensure irq_work and smp_call_function do not (yet) see the members of their respective data structures change name. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lkml.kernel.org/r/20200622100825.844455025@infradead.org
2020-06-28sched/core: s/WF_ON_RQ/WQ_ON_CPU/Peter Zijlstra
Use a better name for this poorly named flag, to avoid confusion... Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Link: https://lkml.kernel.org/r/20200622100825.785115830@infradead.org
2020-06-28sched/core: Fix ttwu() racePeter Zijlstra
Paul reported rcutorture occasionally hitting a NULL deref: sched_ttwu_pending() ttwu_do_wakeup() check_preempt_curr() := check_preempt_wakeup() find_matching_se() is_same_group() if (se->cfs_rq == pse->cfs_rq) <-- *BOOM* Debugging showed that this only appears to happen when we take the new code-path from commit: 2ebb17717550 ("sched/core: Offload wakee task activation if it the wakee is descheduling") and only when @cpu == smp_processor_id(). Something which should not be possible, because p->on_cpu can only be true for remote tasks. Similarly, without the new code-path from commit: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") this would've unconditionally hit: smp_cond_load_acquire(&p->on_cpu, !VAL); and if: 'cpu == smp_processor_id() && p->on_cpu' is possible, this would result in an instant live-lock (with IRQs disabled), something that hasn't been reported. The NULL deref can be explained however if the task_cpu(p) load at the beginning of try_to_wake_up() returns an old value, and this old value happens to be smp_processor_id(). Further assume that the p->on_cpu load accurately returns 1, it really is still running, just not here. Then, when we enqueue the task locally, we can crash in exactly the observed manner because p->se.cfs_rq != rq->cfs_rq, because p's cfs_rq is from the wrong CPU, therefore we'll iterate into the non-existant parents and NULL deref. The closest semi-plausible scenario I've managed to contrive is somewhat elaborate (then again, actual reproduction takes many CPU hours of rcutorture, so it can't be anything obvious): X->cpu = 1 rq(1)->curr = X CPU0 CPU1 CPU2 // switch away from X LOCK rq(1)->lock smp_mb__after_spinlock dequeue_task(X) X->on_rq = 9 switch_to(Z) X->on_cpu = 0 UNLOCK rq(1)->lock // migrate X to cpu 0 LOCK rq(1)->lock dequeue_task(X) set_task_cpu(X, 0) X->cpu = 0 UNLOCK rq(1)->lock LOCK rq(0)->lock enqueue_task(X) X->on_rq = 1 UNLOCK rq(0)->lock // switch to X LOCK rq(0)->lock smp_mb__after_spinlock switch_to(X) X->on_cpu = 1 UNLOCK rq(0)->lock // X goes sleep X->state = TASK_UNINTERRUPTIBLE smp_mb(); // wake X ttwu() LOCK X->pi_lock smp_mb__after_spinlock if (p->state) cpu = X->cpu; // =? 1 smp_rmb() // X calls schedule() LOCK rq(0)->lock smp_mb__after_spinlock dequeue_task(X) X->on_rq = 0 if (p->on_rq) smp_rmb(); if (p->on_cpu && ttwu_queue_wakelist(..)) [*] smp_cond_load_acquire(&p->on_cpu, !VAL) cpu = select_task_rq(X, X->wake_cpu, ...) if (X->cpu != cpu) switch_to(Y) X->on_cpu = 0 UNLOCK rq(0)->lock However I'm having trouble convincing myself that's actually possible on x86_64 -- after all, every LOCK implies an smp_mb() there, so if ttwu observes ->state != RUNNING, it must also observe ->cpu != 1. (Most of the previous ttwu() races were found on very large PowerPC) Nevertheless, this fully explains the observed failure case. Fix it by ordering the task_cpu(p) load after the p->on_cpu load, which is easy since nothing actually uses @cpu before this. Fixes: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") Reported-by: Paul E. McKenney <paulmck@kernel.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200622125649.GC576871@hirez.programming.kicks-ass.net
2020-06-28sched/core: Fix PI boosting between RT and DEADLINE tasksJuri Lelli
syzbot reported the following warning: WARNING: CPU: 1 PID: 6351 at kernel/sched/deadline.c:628 enqueue_task_dl+0x22da/0x38a0 kernel/sched/deadline.c:1504 At deadline.c:628 we have: 623 static inline void setup_new_dl_entity(struct sched_dl_entity *dl_se) 624 { 625 struct dl_rq *dl_rq = dl_rq_of_se(dl_se); 626 struct rq *rq = rq_of_dl_rq(dl_rq); 627 628 WARN_ON(dl_se->dl_boosted); 629 WARN_ON(dl_time_before(rq_clock(rq), dl_se->deadline)); [...] } Which means that setup_new_dl_entity() has been called on a task currently boosted. This shouldn't happen though, as setup_new_dl_entity() is only called when the 'dynamic' deadline of the new entity is in the past w.r.t. rq_clock and boosted tasks shouldn't verify this condition. Digging through the PI code I noticed that what above might in fact happen if an RT tasks blocks on an rt_mutex hold by a DEADLINE task. In the first branch of boosting conditions we check only if a pi_task 'dynamic' deadline is earlier than mutex holder's and in this case we set mutex holder to be dl_boosted. However, since RT 'dynamic' deadlines are only initialized if such tasks get boosted at some point (or if they become DEADLINE of course), in general RT 'dynamic' deadlines are usually equal to 0 and this verifies the aforementioned condition. Fix it by checking that the potential donor task is actually (even if temporary because in turn boosted) running at DEADLINE priority before using its 'dynamic' deadline value. Fixes: 2d3d891d3344 ("sched/deadline: Add SCHED_DEADLINE inheritance logic") Reported-by: syzbot+119ba87189432ead09b4@syzkaller.appspotmail.com Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Tested-by: Daniel Wagner <dwagner@suse.de> Link: https://lkml.kernel.org/r/20181119153201.GB2119@localhost.localdomain
2020-06-28sched/deadline: Initialize ->dl_boostedJuri Lelli
syzbot reported the following warning triggered via SYSC_sched_setattr(): WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 setup_new_dl_entity /kernel/sched/deadline.c:594 [inline] WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_dl_entity /kernel/sched/deadline.c:1370 [inline] WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_task_dl+0x1c17/0x2ba0 /kernel/sched/deadline.c:1441 This happens because the ->dl_boosted flag is currently not initialized by __dl_clear_params() (unlike the other flags) and setup_new_dl_entity() rightfully complains about it. Initialize dl_boosted to 0. Fixes: 2d3d891d3344 ("sched/deadline: Add SCHED_DEADLINE inheritance logic") Reported-by: syzbot+5ac8bac25f95e8b221e7@syzkaller.appspotmail.com Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Daniel Wagner <dwagner@suse.de> Link: https://lkml.kernel.org/r/20200617072919.818409-1-juri.lelli@redhat.com
2020-06-28sched/core: Check cpus_mask, not cpus_ptr in __set_cpus_allowed_ptr(), to ↵Scott Wood
fix mask corruption This function is concerned with the long-term CPU mask, not the transitory mask the task might have while migrate disabled. Before this patch, if a task was migrate-disabled at the time __set_cpus_allowed_ptr() was called, and the new mask happened to be equal to the CPU that the task was running on, then the mask update would be lost. Signed-off-by: Scott Wood <swood@redhat.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200617121742.cpxppyi7twxmpin7@linutronix.de
2020-06-28sched/core: Fix CONFIG_GCC_PLUGIN_RANDSTRUCT build failPeter Zijlstra
As a temporary build fix, the proper cleanup needs more work. Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Eric Biggers <ebiggers@kernel.org> Suggested-by: Eric Biggers <ebiggers@kernel.org> Suggested-by: Kees Cook <keescook@chromium.org> Fixes: a148866489fb ("sched: Replace rq::wake_list") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-06-28Merge tag 'imx-fixes-5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.8: - Fix LDO1 and LDO2 voltage range for a couple of i.MX8M board device trees. - Fix i.MX8MP UID fuse offset in i.MX8M SoC driver. - Fix watchdog configuration in imx6ul-kontron device tree. - Fix one build warning seen on building soc-imx8m driver with x86_64-randconfig. - Add missing put_device() call for a couple of mach-imx PM functions. * tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx8m: fix build warning ARM: imx6: add missing put_device() call in imx6q_suspend_init() ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() soc: imx8m: Correct i.MX8MP UID fuse offset ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range Link: https://lore.kernel.org/r/20200624111725.GA24312@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'arm-soc/for-5.8/drivers-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers fixes for 5.8, please pull the following: - Andy provides a fix for the Raspberry Pi firmware driver to print the correct time upon boot. This is a fallout from a converstion to use the ptT format * tag 'arm-soc/for-5.8/drivers-fixes' of https://github.com/Broadcom/stblinux: ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision() Link: https://lore.kernel.org/r/20200619202250.19029-2-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'arm-soc/for-5.8/soc-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs machine/Kconfig fixes for 5.8, please pull the following: - Matthew adds a missing select to permit the use of the standard ARM SP804 timers on Norsthstar Plus (NSP) * tag 'arm-soc/for-5.8/soc-fixes' of https://github.com/Broadcom/stblinux: ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP Link: https://lore.kernel.org/r/20200619202250.19029-3-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'arm-soc/for-5.8/devicetree-fixes' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.8, please pull the following: - Rafal adds a missing 'device_type' property to the Luxul XWC-2000 required for the memory nodes to be correctly parsed by Linux - Matthew provides two fixes for the NSP SoCs, one to disable the PL330 DMA controller by default since it can be left in reset by the bootloader and the second to correct the flow accelerator mailbox node * tag 'arm-soc/for-5.8/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: NSP: Correct FA2 mailbox node ARM: dts: NSP: Disable PL330 by default, add dma-coherent property ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000 Link: https://lore.kernel.org/r/20200619202250.19029-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Revert "ARM: sti: Implement dummy L2 cache's write_sec"Patrice Chotard
This reverts commit 7b8e0188fa717cd9abc4fb52587445b421835c2a. Initially, STiH410-B2260 was supposed to be secured, that's why l2c_write_sec was stubbed to avoid secure register access from non secure world. But by default, STiH410-B2260 is running in non secure mode, so L2 cache register accesses are authorized, l2c_write_sec stub is not needed. With this patch, L2 cache is configured and performance are enhanced. Link: https://lore.kernel.org/r/20200618172456.29475-1-patrice.chotard@st.com Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Cc: Alain Volmat <alain.volmat@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'omap-for-v5.8/fixes-rc1-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/omap-fixes Few dts fixes for omaps for v5.8 Few fixes for various devices: - Prevent pocketgeagle header line signal from accidentally setting micro-SD write protection signal by removing the default mux - Fix NFSroot flakeyness after resume for duover by switching the smsc911x gpio interrupt to back to level sensitive - Fix regression for omap4 clockevent source after recent system timer changes - Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid" phy-mode * tag 'omap-for-v5.8/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode ARM: dts: Fix omap4 system timer source clocks ARM: dts: Fix duovero smsc interrupt for suspend ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect Link: https://lore.kernel.org/r/pull-1592499282-121092@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'omap-for-v5.8/dt-missed-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/omap-fixes Missed sdhci patch for am3 and am4 I forgot to send a pull request earlier for converting am3 and am4 to use sdhci-omap driver instead of the old omap_hsmmc driver. There was a display subsystem related suspend and resume regression found recently and looks like I forgot to send a pull request for this patch while debugging the regression. This patch has been tested without the display subsystem, and has been in Linux next for several weeks now, so would be good to have merged for v5.8. * tag 'omap-for-v5.8/dt-missed-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Move am33xx and am43xx mmc nodes to sdhci-omap driver Link: https://lore.kernel.org/r/pull-1591637467-607254@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'tee-ml-for-v5.8' of ↵Arnd Bergmann
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Change the TEE mailing list in MAINTAINERS * tag 'tee-ml-for-v5.8' of git://git.linaro.org/people/jens.wiklander/linux-tee: MAINTAINERS: change tee mailing list Link: https://lore.kernel.org/r/20200616075948.GA2288211@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'omap-for-v5.8/fixes-merge-window-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.8 The recent display subsystem (DSS) related platform data changes caused display related regressions for suspend and resume. Looks like I only tested suspend and resume before dropping the legacy platform data, and forgot to test it after dropping it. Turns out the main issue was that we no longer have platform code calling pm_runtime_suspend for DSS like we did for the legacy platform data case, and that fix is still being discussed on the dri-devel list and will get merged separately. The DSS related testing exposed a pile other other display related issues that also need fixing though: - Fix ti-sysc optional clock handling and reset status checks for devices that reset automatically in idle like DSS - Ignore ti-sysc clockactivity bit unless separately requested to avoid unexpected performance issues - Init ti-sysc framedonetv_irq to true and disable for am4 - Avoid duplicate DSS reset for legacy mode with dts data - Remove LCD timings for am4 as they cause warnings now that we're using generic panels Then there is a pile of other fixes not related to the DSS: - Fix omap_prm reset deassert as we still have drivers setting the pm_runtime_irq_safe() flag - Flush posted write for ti-sysc enable and disable - Fix droid4 spi related errors with spi flags - Fix am335x USB range and a typo for softreset - Fix dra7 timer nodes for clocks for IPU and DSP - Drop duplicate mailboxes after mismerge for dra7 * tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: Revert "bus: ti-sysc: Increase max softreset wait" ARM: dts: am437x-epos-evm: remove lcd timings ARM: dts: am437x-gp-evm: remove lcd timings ARM: dts: am437x-sk-evm: remove lcd timings ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag ARM: dts: Fix am33xx.dtsi USB ranges length bus: ti-sysc: Increase max softreset wait ARM: OMAP2+: Fix legacy mode dss_reset bus: ti-sysc: Fix uninitialized framedonetv_irq bus: ti-sysc: Ignore clockactivity unless specified as a quirk bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit ARM: dts: omap4-droid4: Fix spi configuration and increase rate bus: ti-sysc: Flush posted write on enable and disable soc: ti: omap-prm: use atomic iopoll instead of sleeping one Link: https://lore.kernel.org/r/pull-1591889257-410830@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-27afs: Fix storage of cell namesDavid Howells
The cell name stored in the afs_cell struct is a 64-char + NUL buffer - when it needs to be able to handle up to AFS_MAXCELLNAME (256 chars) + NUL. Fix this by changing the array to a pointer and allocating the string. Found using Coverity. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-27Merge tag '5.8-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Six cifs/smb3 fixes, three of them for stable. Fixes xfstests 451, 313 and 316" * tag '5.8-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: misc: Use array_size() in if-statement controlling expression cifs: update ctime and mtime during truncate cifs/smb3: Fix data inconsistent when punch hole cifs/smb3: Fix data inconsistent when zero file range cifs: Fix double add page to memcg when cifs_readpages cifs: Fix cached_fid refcnt leak in open_shroot
2020-06-27Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Six small fixes, five in drivers and one to correct another minor regression from cc97923a5bcc ("block: move dma drain handling to scsi") where we still need the drain stub to be built in to the kernel for the modular libata, non-modular SAS driver case" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mptscsih: Fix read sense data size scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset() scsi: libata: Fix the ata_scsi_dma_need_drain stub scsi: qla2xxx: Keep initiator ports after RSCN scsi: qla2xxx: Set NVMe status code for failed NVMe FCP request
2020-06-27Merge tag 'vfio-v5.8-rc3' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fixes from Alex Williamson: - Fix double free of eventfd ctx (Alex Williamson) - Fix duplicate use of capability ID (Alex Williamson) - Fix SR-IOV VF memory enable handling (Alex Williamson) * tag 'vfio-v5.8-rc3' of git://github.com/awilliam/linux-vfio: vfio/pci: Fix SR-IOV VF handling with MMIO blocking vfio/type1: Fix migration info capability ID vfio/pci: Clear error and request eventfd ctx after releasing
2020-06-27Merge branch 'i2c/for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "This contains a 5.8 regression fix for the Designware driver, a register bitfield fix for the fsi driver, and a missing sanity check for the I2C core" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: check returned size of emulated smbus block read i2c: fsi: Fix the port number field in status register i2c: designware: Adjust bus speed independently of ACPI
2020-06-27Merge tag 'staging-5.8-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are a small number of tiny staging driver fixes for 5.8-rc3. Not much here, but there were some reported problems to be fixed: - three wfx driver fixes - rtl8723bs driver fix All of these have been in linux-next with no reported issues" * tag 'staging-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Staging: rtl8723bs: prevent buffer overflow in update_sta_support_rate() staging: wfx: fix coherency of hif_scan() prototype staging: wfx: drop useless loop staging: wfx: fix AC priority
2020-06-27Merge tag 'usb-5.8-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.8-rc3 to resolve some reported issues. Nothing major here: - gadget driver fixes - cdns3 driver fixes - xhci fixes - renesas_usbhs driver fixes - some new device support with ids - documentation update All of these have been in linux-next with no reported issues" * tag 'usb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits) usb: renesas_usbhs: getting residue from callback_result Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk" xhci: Poll for U0 after disabling USB2 LPM xhci: Return if xHCI doesn't support LPM usb: host: xhci-mtk: avoid runtime suspend when removing hcd xhci: Fix enumeration issue when setting max packet size for FS devices. xhci: Fix incorrect EP_STATE_MASK usb: cdns3: ep0: add spinlock for cdns3_check_new_setup usb: cdns3: trace: using correct dir value usb: cdns3: ep0: fix the test mode set incorrectly Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk" usb: gadget: udc: Potential Oops in error handling code usb: phy: tegra: Fix unnecessary check in tegra_usb_phy_probe() usb: dwc3: pci: Fix reference count leak in dwc3_pci_resume_work usb: cdns3: ep0: add spinlock for cdns3_check_new_setup usb: cdns3: trace: using correct dir value usb: cdns3: ep0: fix the test mode set incorrectly usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs USB: ohci-sm501: Add missed iounmap() in remove cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip ...
2020-06-27Merge tag 'char-misc-5.8-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Some tiny char/misc driver fixes for 5.8-rc3. The "largest" changes are in the mei driver, to resolve some reported problems and add some new device ids. There's also a binder bugfix, an fpga driver build fix, and some assorted habanalabs fixes. All of these, except for the habanalabs fixes, have been in linux-next with no reported issues. The habanalabs driver changes showed up in my tree on Friday, but as they are totally self-contained, all should be good there" * tag 'char-misc-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: increase h/w timer when checking idle habanalabs: Correct handling when failing to enqueue CB habanalabs: increase GAUDI QMAN ARB WDT timeout habanalabs: rename mmu_write() to mmu_asid_va_write() habanalabs: use PI in MMU cache invalidation habanalabs: block scalar load_and_exe on external queue mei: me: add tiger lake point device ids for H platforms. mei: me: disable mei interface on Mehlow server platforms binder: fix null deref of proc->context fpga: zynqmp: fix modular build
2020-06-27Merge tag 'edac_urgent_for_5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: "A single fix for amd64_edac restoring the reporting of the DRAM scrub rate on family 0x15 CPUs" * tag 'edac_urgent_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/amd64: Read back the scrub rate PCI register on F15h
2020-06-27Merge tag 'dma-mapping-5.8-4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fixes from Christoph Hellwig: - fix dma coherent mmap in nommu (me) - more AMD SEV fallout (David Rientjes, me) - fix alignment in dma_common_*_remap (Eric Auger) * tag 'dma-mapping-5.8-4' of git://git.infradead.org/users/hch/dma-mapping: dma-remap: align the size in dma_common_*_remap() dma-mapping: DMA_COHERENT_POOL should select GENERIC_ALLOCATOR dma-direct: add missing set_memory_decrypted() for coherent mapping dma-direct: check return value when encrypting or decrypting memory dma-direct: re-encrypt memory if dma_direct_alloc_pages() fails dma-direct: always align allocation size in dma_direct_alloc_pages() dma-direct: mark __dma_direct_alloc_pages static dma-direct: re-enable mmap for !CONFIG_MMU
2020-06-27Merge tag 'nfs-for-5.8-2' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Anna Schumaker: "Stable Fixes: - xprtrdma: Fix handling of RDMA_ERROR replies - sunrpc: Fix rollback in rpc_gssd_dummy_populate() - pNFS/flexfiles: Fix list corruption if the mirror count changes - NFSv4: Fix CLOSE not waiting for direct IO completion - SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment() Other Fixes: - xprtrdma: Fix a use-after-free with r_xprt->rx_ep - Fix other xprtrdma races during disconnect - NFS: Fix memory leak of export_path" * tag 'nfs-for-5.8-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment() NFSv4 fix CLOSE not waiting for direct IO compeletion pNFS/flexfiles: Fix list corruption if the mirror count changes nfs: Fix memory leak of export_path sunrpc: fixed rollback in rpc_gssd_dummy_populate() xprtrdma: Fix handling of RDMA_ERROR replies xprtrdma: Clean up disconnect xprtrdma: Clean up synopsis of rpcrdma_flush_disconnect() xprtrdma: Use re_connect_status safely in rpcrdma_xprt_connect() xprtrdma: Prevent dereferencing r_xprt->rx_ep after it is freed
2020-06-27Merge tag 'io_uring-5.8-2020-06-26' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "Three small fixes: - Close a corner case for polled IO resubmission (Pavel) - Toss commands when exiting (Pavel) - Fix SQPOLL conditional reschedule on perpetually busy submit (Xuan)" * tag 'io_uring-5.8-2020-06-26' of git://git.kernel.dk/linux-block: io_uring: fix current->mm NULL dereference on exit io_uring: fix hanging iopoll in case of -EAGAIN io_uring: fix io_sq_thread no schedule when busy
2020-06-27Merge tag 'block-5.8-2020-06-26' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph: - multipath deadlock fixes (Anton) - NUMA fixes (Max) - RDMA completion vector fix (Max) - IO deadlock fix (Sagi) - multipath reference fix (Sagi) - NS mutation fix (Sagi) - Use right allocator when freeing bip in error path (Chengguang) * tag 'block-5.8-2020-06-26' of git://git.kernel.dk/linux-block: nvme-multipath: fix bogus request queue reference put nvme-multipath: fix deadlock due to head->lock nvme: don't protect ns mutation with ns->head->lock nvme-multipath: fix deadlock between ana_work and scan_work nvme: fix possible deadlock when I/O is blocked nvme-rdma: assign completion vector correctly nvme-loop: initialize tagset numa value to the value of the ctrl nvme-tcp: initialize tagset numa value to the value of the ctrl nvme-pci: initialize tagset numa value to the value of the ctrl nvme-pci: override the value of the controller's numa node nvme: set initial value for controller's numa node block: release bip in a right way in error path
2020-06-27Merge tag 'for-5.8/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Quite a few DM zoned target fixes and a Zone append fix in DM core. Considering the amount of dm-zoned changes that went in during the 5.8 merge window these fixes are not that surprising. - A few DM writecache target fixes. - A fix to Documentation index to include DM ebs target docs. - Small cleanup to use struct_size() in DM core's retrieve_deps(). * tag 'for-5.8/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm writecache: add cond_resched to loop in persistent_memory_claim() dm zoned: Fix reclaim zone selection dm zoned: Fix random zone reclaim selection dm: update original bio sector on Zone Append dm zoned: Fix metadata zone size check docs: device-mapper: add dm-ebs.rst to an index file dm ioctl: use struct_size() helper in retrieve_deps() dm writecache: skip writecache_wait when using pmem mode dm writecache: correct uncommitted_block when discarding uncommitted entry dm zoned: assign max_io_len correctly dm zoned: fix uninitialized pointer dereference
2020-06-27Merge tag 'kgdb-5.8-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux Pull kgdb fixes from Daniel Thompson: "The main change here is a fix for a number of unsafe interactions between kdb and the console system. The fixes are specific to kdb (pure kgdb debugging does not use the console system at all). On systems with an NMI then kdb, if it is enabled, must get messages to the user despite potentially running from some "difficult" calling contexts. These fixes avoid using the console system where we have been provided an alternative (safer) way to interact with the user and, if using the console system in unavoidable, use oops_in_progress for deadlock avoidance. These fixes also ensure kdb honours the console enable flag. Also included is a fix that wraps kgdb trap handling in an RCU read lock to avoids triggering diagnostic warnings. This is a wide lock scope but this is OK because kgdb is a stop-the-world debugger. When we stop the world we put all the CPUs into holding pens and this inhibits RCU update anyway" * tag 'kgdb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kgdb: Avoid suspicious RCU usage warning kdb: Switch to use safer dbg_io_ops over console APIs kdb: Make kdb_printf() console handling more robust kdb: Check status of console prior to invoking handlers kdb: Re-factor kdb_printf() message write code
2020-06-27Merge tag 'powerpc-5.8-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - A fix for a crash in nested KVM when CONFIG_DEBUG_VIRTUAL=y. - Two minor build fixes. Thanks to: Aneesh Kumar K.V, Arseny Solokha, Harish. * tag 'powerpc-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix build failure in ebb tests powerpc/kvm/book3s64: Fix kernel crash with nested kvm & DEBUG_VIRTUAL powerpc/fsl_booke/32: Fix build with CONFIG_RANDOMIZE_BASE
2020-06-27Merge tag 'riscv-for-linus-5.8-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "This contains a handful of fixes I'd like to target for rc3. Most of them fix issues with the conversion of our vDSO to C. There is also one fix to the SiFive PRCI driver that I picked up as it's causing boot issues on the hardware. - A fix to allow kernels with dynamic ftrace to use the vDSO. - Some build fixes for the C vDSO functions. - A fix to the PRCI driver's memory allocation, which was the cause of some boot panics with FREELIST_RANDOM" * tag 'riscv-for-linus-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fixup __vdso_gettimeofday broke dynamic ftrace riscv: Add extern declarations for vDSO time-related functions clk: sifive: allocate sufficient memory for struct __prci_data riscv: Add -fPIC option to CFLAGS_vgettimeofday.o
2020-06-27Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The big fix here is to our vDSO sigreturn trampoline as, after a painfully long stint of debugging, it turned out that fixing some of our CFI directives in the merge window lit up a bunch of logic in libgcc which has been shown to SEGV in some cases during asynchronous pthread cancellation. It looks like we can fix this by extending the directives to restore most of the interrupted register state from the sigcontext, but it's risky and hard to test so we opted to remove the CFI directives for now and rely on the unwinder fallback path like we used to. - Fix unwinding through vDSO sigreturn trampoline - Fix build warnings by raising minimum LD version for PAC - Whitelist some Kryo Cortex-A55 derivatives for Meltdown and SSB - Fix perf register PC reporting for compat tasks - Fix 'make clean' warning for arm64 signal selftests - Fix ftrace when BTI is compiled in - Avoid building the compat vDSO using GCC plugins" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Add KRYO{3,4}XX silver CPU cores to SSB safelist arm64: perf: Report the PC value in REGS_ABI_32 mode kselftest: arm64: Remove redundant clean target arm64: kpti: Add KRYO{3, 4}XX silver CPU cores to kpti safelist arm64: Don't insert a BTI instruction at inner labels arm64: vdso: Don't use gcc plugins for building vgettimeofday.c arm64: vdso: Only pass --no-eh-frame-hdr when linker supports it arm64: Depend on newer binutils when building PAC arm64: compat: Remove 32-bit sigreturn code from the vDSO arm64: compat: Always use sigpage for sigreturn trampoline arm64: compat: Allow 32-bit vdso and sigpage to co-exist arm64: vdso: Disable dwarf unwinding through the sigreturn trampoline
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 03:59:12 +0000