summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-06-03rt2x00: Fix HT40 operation in rt2800.Gertjan van Wingerde
Closer inspection of the legacy Ralink driver reveals that in case of HT40+ or HT40- we must adjust the frequency settings that we program to the device. Implement the same adjustment in the rt2x00 code. With this HT40 seems to work for all devices supported by rt2800pci and rt2800usb. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Sync rt2800 MCU boot signal with Ralink driver.Gertjan van Wingerde
Latest versions of the Ralink rt2800 family drivers use 0 as the token value, not 0xff. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Move PCI/USB specific register initializations to rt2800{pci,usb}.Gertjan van Wingerde
This prevents us having common code depend on PCI or USB specific code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Simplify check for external LNA in rt2800_init_rfcsr.Gertjan van Wingerde
Instead of parsing the EEPROM information, use the flag that was set during device initialization. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Introduce separate interface type for PCI-express.Gertjan van Wingerde
Needed later for PCI-express specific code in rt2800pci. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Move all register definitions for rt2800 to rt2800.h.Gertjan van Wingerde
There is no point on having them separated across 3 files. At the same time rename USB_CYC_CFG to its proper name US_CYC_CNT (as per the datasheet). Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Remove RT2870 chipset identification.Gertjan van Wingerde
There is no evidence, either in adapters or in the Ralink code, that such a device actually exists. All so-call RT2870 adapter identify themselves as RT2860. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Centralize rt2800 beacon writing.Gertjan van Wingerde
The beacon writing functions of rt2800pci and rt2800usb are now identical. Move them to rt2800lib to only have one central function. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Clean up USB vendor request buffer functions.Gertjan van Wingerde
There is no need to force the separation between a buffer USB vendor request that does fit the CSR cache and one that doesn't onto the callers. This is something that the rt2x00usb_vendor_request_buff function can figure out by itself. Combine the rt2x00usb_vendor_request_buff and rt2x00usb_vendor_request_large_buff functions into a single one, as both of them were equivalent for small buffers anyway. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Fix rt2800usb TX descriptor writing.Gertjan van Wingerde
The recent changes to skb handling introduced a bug in the rt2800usb TX descriptor writing whereby the length of the USB packet wasn't calculated correctly. Found via code inspection, as the devices themselves didn't seem to mind. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Properly reserve room for descriptors in skbs.Gertjan van Wingerde
Instead of fiddling with the skb->data pointer and thereby risking out of bounds accesses, properly reserve the space needed in an skb for descriptors. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Reverse calling order of bus write_tx_desc and driver write_tx_desc.Gertjan van Wingerde
For rt2800 reverse the calling order of rt2x00pci_write_data and rt2800pci_write_data. Currently rt2800pci_write_data calls rt2x00pci_write_data as there can be only 1 driver callback function specified by the driver. Reverse this calling order by introducing a new driver callback function, called write_tx_datadesc, which is called from the bus-specific write_tx_data functions. Preparation for futher cleanups in the skb data handling of rt2x00. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Push beacon TX descriptor writing to drivers.Gertjan van Wingerde
Not all the devices require a TX descriptor to be written (i.e. rt2800 device don't require them). Push down the creation of the TX descriptor to the device drivers so that they can decide for themselves whether a TX descriptor is to be created. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-02ath9k_htc: fix build error when ATH9K_HTC_DEBUGFS not enabledJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02wl1271: Fix scan parameter handling for 5GHzJuuso Oikarinen
The 5GHz bands were scanned without the proper IE's in place, preventing proper 5GHz scanning. This patches fixes the problem by storing a pointer to the scan request (with the IE's) for all iterations of scan. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02wl1271: Use proper rates for PSM entry/exit null-funcs for 5GHzJuuso Oikarinen
A fixed 1 mbps rate was used for the PSM entry/exit null-func frames. Fix this by using the basic rates instead. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02wl1271: the core wl1271 module shouldn't depend on SPI_MASTERLuciano Coelho
The core wl1271 module can also be used with SDIO, so it should not depend on SPI_MASTER. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02wl1271: Flush TX buffers to air before going to idleJuuso Oikarinen
The mac80211 changes to idle almost immediately after transmitting some frames, such as deauth etc. When going to idle, the wl1271 is disconnected, which causes TX frames already on buffers, but not yet transmitted, to be deleted. To make sure deauth frames reach the air, allow the TX buffers to flush before proceeding to idle. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02wl1271: Idle handling into own functionJuuso Oikarinen
As there is more and more stuff triggered by going in and out of idle, create a separate function for handling that. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02wl1271: Prevent dropping of TX frames in joinsJuuso Oikarinen
The wl1271 uses a session counter in CMD_JOIN and TX frame descriptors. This counter is used to determine which frames to drop when the CMD_JOIN is executed. The driver executes CMD_JOIN multiple times upon association and sometimes disassociation, and we don't want any frames to get lost. Fix this by incrementing the session counter only when leaving idle (not every CMD_JOIN as before.) Also, remove the TX flush flag from the CMD_JOIN options. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k: cleanup: remove unneeded null checkDan Carpenter
We dereference "wmi" on the line before and also when we initialize "ah". This check has always been after a dereference since the first commit a couple months ago. Looking through the code, it looks like "wmi" can't actually be null here so I just removed the check. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02drivers/net/wireless/prism54: Use memdup_userJulia Lawall
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k: Fix bug in validating received data length for edmaVasanthakumar Thiagarajan
The rx status length should also be taken into account while validating the length of a received frame. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k: Fix bug in accessing skb->data of rx frame for edmaVasanthakumar Thiagarajan
Skip the rx status portion in skb->data before accessing ieee80211 frame header. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k: Clean up few function parameters in recv.cVasanthakumar Thiagarajan
ath9k_rx_skb_preprocess() needs only ieee80211 frame header, pass only frame headers instead of skb to that function. Also remove ineffective frame dump in ath9k_process_rate(). Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k: Move driver specific structuresSujith
A bunch of data structures are present in the common module, which are internal to ath9k. Move them to ath9k.h Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k: Move ath9k specific RX code to driverSujith
This patch relocates RX processing code from the common module to ath9k. This reduces the size of the common module which is also used by ath9k_htc. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02drivers/net/wireless: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k_hw: Enable TX IQ calibration on AR9003Luis R. Rodriguez
To enable it we now disable and re-enable the PHY chips after TX IQ calibration. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02cfg80211: make action channel type optionalJohannes Berg
When sending action frames, we want to verify that we do that on the correct channel. However, checking the channel type in addition can get in the way, since the channel type could change on the fly during an association, and it's not useful to have the channel type anyway since it has no effect on the transmission. Therefore, make it optional to specify so that if wanted, it can still be checked, but is not required. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath5k: print error message if ANI levels are out of rangeBruno Randolf
Since we have sysfs to manually set the ANI levels, we should print errors to the kernel log if the values are out of bounds. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath5k: always calculate ANI listen timeBruno Randolf
Calculate 'listen' time also when automatic ANI is off, since this and the "busy" time is useful information also in manual mode. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath5k: add sysfs files for ANI parametersBruno Randolf
/sys/class/ieee80211/phy0/device/ani/ani_mode /sys/class/ieee80211/phy0/device/ani/noise_immunity_level /sys/class/ieee80211/phy0/device/ani/spur_level /sys/class/ieee80211/phy0/device/ani/firstep_level /sys/class/ieee80211/phy0/device/ani/ofdm_weak_signal_detection /sys/class/ieee80211/phy0/device/ani/cck_weak_signal_detection /sys/class/ieee80211/phy0/device/ani/noise_immunity_level_max /sys/class/ieee80211/phy0/device/ani/spur_level_max /sys/class/ieee80211/phy0/device/ani/firstep_level_max sysfs has a lot of symlinks, so you can find the files also in other locations, like (by PCI ID) /sys/devices/pci0000:00/0000:00:11.0/ani and others. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath5k: use ath5k_softc as driver dataBruno Randolf
It's our "private driver data"... It's used more often and hw is the mac80211 part. This makes more sense with the next (sysfs) patch. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath5k: clarify logic when to enable spur mitigation filterBruno Randolf
The old code logically did not make sense and seems to have been confused by the fact that we could have newer EEPROMs on older hardware. In any case the spur mitigation filter was set if the srev was >= AR5K_SREV_AR5424. Spur info is available only from EEPROM versions bigger than 5.3 but but the EEPOM routines will use static values for older versions, so that should be o.k. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath5k: remove ATH_TRACE macroBruno Randolf
Now that we have ftrace, it is not needed any more. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath5k: run NF calibration only every 60 secondsBruno Randolf
Since NF calibration interferes with TX and RX and also has been the cause of other problems (when it's run concurrently with ath5k_reset) we want to run it less often - every 60 seconds for now. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath5k: Stop queues only for NF calibrationBruno Randolf
As far as we know, only NF calibration interferes with RX/TX so we can leave the queues enabled for the other calibrations. BTW: Stopping the queues is not enough for avoiding transmissions, since there might be packets in the queue + beacons are also sent regularly! But i leave it like this until we have a better solution (stopping TX DMA?). Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath5k: move noise floor calibration into taskletBruno Randolf
Seperate noise floor calibration from other PHY calibration and move it to the tasklet. This is the first step to more separation of different calibrations. Also move out ath5k_hw_request_rfgain_probe(ah) so we have one clean function for I/Q calibration on 5111x parts. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath5k: initialize calibration timersBruno Randolf
Initialize calibration timers on reset, since otherwise they might be in the future and the calibration tasklet might not be scheduled for a long time. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02rndis_wlan: increase assocbuf size and validate association info offsets ↵Jussi Kivilinna
from driver Buffer size for get_association_info was limited to WEXT event size. Since association info no longer is sent through WEXT, this limit is not needed. Code also did not check if data get truncated, memory outside buffer might be addressed. Fix all these. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k_hw: Enable auto sleep for ar9003Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k: Fix power save with auto sleepingVasanthakumar Thiagarajan
Rx should not be disabed/disabled when hw supports auto sleeping. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k: Make sure null func frame is acked before going into PS for ar9003Vasanthakumar Thiagarajan
Add missing code to handle nullfunc frame completion in ath_tx_edma_tasklet(). Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02wireless: fix several minor description typosWalter Goldens
Signed-off-by: Walter Goldens <goldenstranger@yahoo.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02cfg80211: don't refuse HT20 channels on devices that don't support HT40Helmut Schaa
Don't refuse HT20 channels on devices that don't support HT40. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k_htc: Enable RX STBC for AR9271Sujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k_htc: Enable SGI in HT20 for AR9271Sujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k_htc: Update HT configuration properlySujith
Use BSS_CHANGED_HT to handle HT parameter changes. The rate information on the target has to be updated to handle changes in HT configuration. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-02ath9k_htc: Cleanup rate initializationSujith
This patch removes a large chunk of code dealing with rate management within the driver and simplifying things by removing the hacky method of calculating HT changes. A subsequent patch would fix this by just using BSS_CHANGED_HT from mac80211. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 01:11:27 +0000