summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-02-01ide-cd: move historical changelog to ↵Bartlomiej Zolnierkiewicz
Documentation/ide/ChangeLog.ide-cd.1994-2004 Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: fix trailing whitespaces in changelogBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: fix DMA error handling in cdrom_newpc_intr()Bartlomiej Zolnierkiewicz
Make cdrom_newpc_intr() match cdrom_{read,write}_intr() w.r.t. handling DMA errors: * disable DMA before cdrom_decode_status() call * log the device name and the type of the request (read/write) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: fix "missing data" handling in cdrom_pc_intr()Bartlomiej Zolnierkiewicz
If drive still wants to transfer the data we need to pad the transfer instead of just finishing the request. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: add ide_cd_pad_transfer() helperBartlomiej Zolnierkiewicz
Add ide_cd_pad_transfer() helper and use it in cdrom_[new]pc_intr() and cdrom_{read,write}_check_ireason(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: use xfer_func_t in cdrom_pc_intr()Bartlomiej Zolnierkiewicz
Unify writing and reading handling in cdrom_pc_intr() using xfer_func_t. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide/ppc/pmac.c section fixesAdrian Bunk
This patch fixes the following section mismatch: <-- snip --> ... WARNING: vmlinux.o(.text+0x3b641c): Section mismatch in reference from the function .pmac_ide_setup_device() to the function .init.text:.pmac_ide_setup_dma() ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: make wait_drive_not_busy() static againAdrian Bunk
After commit 7267c3377443322588cddaf457cf106839a60463 wait_drive_not_busy() can become static again. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: small ide-scan-pci.c cleanupAdrian Bunk
- ide_scan_pcibus() can become static - instead of ide_scan_pci() we can use ide_scan_pcibus() directly in module_init() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: unexport ide_dma_onAdrian Bunk
ide_dma_on can be unexported. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide/Kconfig: use 'on-board' instead of 'built-in' in config optionsFrans Pop
To avoid confusion between 'built-in' drivers and 'on-board' controllers, consistently use the term 'on-board' for controllers. Minor line-wrapping improvements in descriptions for config options. [ Bart: thanks to Jan for 'built-in'->'on-board' suggestion ] Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01Atari Falcon IDE: Add missing hwif variableGeert Uytterhoeven
Commit cbb010c180294a5242a7681555c28737d9dd26ab ide: drop 'initializing' argument from ide_register_hw() * Rename init_hwif_data() to ide_init_port_data() and export it. * For all users of ide_register_hw() with 'initializing' argument set hwif->present and hwif->hold are always zero so convert these host drivers to use ide_find_port()+ide_init_port_data()+ide_init_port_hw() instead (also no need for init_hwif_default() call since the setup done by it gets over-ridden by ide_init_port_hw() call). * Drop 'initializing' argument from ide_register_hw(). introduced the usage of a hwif variable, but forgot to declare the actual variable. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: kill swap_io_context() as-iosched: fix inconsistent ioc->lock context ide-cd: fix leftover data BUG block: make elevator lib checkpatch compliant cfq-iosched: make checkpatch compliant block: make core bits checkpatch compliant block: new end request handling interface should take unsigned byte counts unexport add_disk_randomness block/sunvdc.c:print_version() must be __devinit splice: always updated atime in direct splice
2008-02-01block: kill swap_io_context()Jens Axboe
It blindly copies everything in the io_context, including the lock. That doesn't work so well for either lock ordering or lockdep. There seems zero point in swapping io contexts on a request to request merge, so the best point of action is to just remove it. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-01docbook: rapidio: fix fatal filename errorRandy Dunlap
Fix docbook fatal error (files were renamed): docproc: linux-2.6.24-git9/arch/ppc/kernel/rio.c: No such file or directory Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01fix directory entry in arch-x86-MakefileSteven Rostedt
Doing a make randconfig I came across this error in the Makefile. This patch makes a directory out of arch/x86/mach-default for CONFIG_X86_RDC321X Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix inconsistent .section usage in lib/ [SPARC/SPARC64]: Fix usage of .section .sched.text in assembler code.
2008-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (173 commits) [NETNS]: Lookup in FIB semantic hashes taking into account the namespace. [NETNS]: Add a namespace mark to fib_info. [IPV4]: fib_sync_down rework. [NETNS]: Process interface address manipulation routines in the namespace. [IPV4]: Small style cleanup of the error path in rtm_to_ifaddr. [IPV4]: Fix memory leak on error path during FIB initialization. [NETFILTER]: Ipv6-related xt_hashlimit compilation fix. [NET_SCHED]: Add flow classifier [NET_SCHED]: sch_sfq: make internal queues visible as classes [NET_SCHED]: sch_sfq: add support for external classifiers [NET_SCHED]: Constify struct tcf_ext_map [BLUETOOTH]: Fix bugs in previous conn add/del workqueue changes. [TCP]: Unexport sysctl_tcp_tso_win_divisor [IPV4]: Make struct ipv4_devconf static. [TR] net/802/tr.c: sysctl_tr_rif_timeout static [XFRM]: Fix statistics. [XFRM]: Remove unused exports. [PKT_SCHED] sch_teql.c: Duplicate IFF_BROADCAST in FMASK, remove 2nd. [BNX2]: Fix ASYM PAUSE advertisement for remote PHY. [IPV4] route cache: Introduce rt_genid for smooth cache invalidation ...
2008-02-01pasemi: Fix thinko in dma_direct_ops setupOlof Johansson
[POWERPC] pasemi: Fix thinko in dma_direct_ops setup The first patch will just fall through and still set dma_data to a bad value, make it return directly instead. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: remove dead timer int pending codeGreg Ungerer
Remove all the dead timer interrupt checking functions for the ColdFire CPU "timers" hardware that are not used after switching to GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: remove empty timer offset function for 68360Greg Ungerer
Switching to GENERIC_TIME means we no longer need the empty timer offset function for the 68360 CPU. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: remove local gettimeofday codeGreg Ungerer
Remove unused local gettimeofday functions, now that we are using GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: set config to use GENERIC_TIMEGreg Ungerer
Switch m68knommu arch to using GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: switch ColdFire TIMER to use GENERIC_TIMEGreg Ungerer
Switch the ColdFire TIMER timer to use GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: switch ColdFire PIT timer to use GENERIC_TIMEGreg Ungerer
Switch the ColdFire PIT timer to using GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: switch 68328 timer to use GENERIC_TIMEGreg Ungerer
Switch the 68328 CPU timer code to using GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: remove unused CONFIG_DISKtel symbolGreg Ungerer
Remove unused CONFIG_DISKtel define. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: fix 528x ColdFire cache settingsGreg Ungerer
Fix problems with the 528x ColdFire CPU cache setup. Do not cache the flash region (if present), and make the runtime settings consistent with the init setting. Problems pointed out by Bernd Buttner <b.buettner@mkc-gmbh.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: use container_of in mcf.cGreg Ungerer
Use container_of() instead of assuming local uart struct is first member of uart_port struct. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: remove dead code from m68knommu timer codeGreg Ungerer
Remove unused LED heartbeat code from m68knommu timer code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: use IRQF_DISABLE in m68328serial.cGreg Ungerer
Use IRQF_DISABLED instead of obsolete IRQ_FLG_STD for request_irq() flags in m68328serial.c driver. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: create common DMA table for ColdFire CPUsGreg Ungerer
Move the ColdFire DMA address table into its own file, and out of each of the different CPU config files. No need to have a copy of it in each of the config setup files. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: modify Makefiles to support common coldfire directoryGreg Ungerer
Modify Makefiles to support separate coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: move ColdFire vectors.c to its own coldfire directoryGreg Ungerer
Move common ColdFire CPU vectors.c to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: move ColdFire timers.c to its own coldfire directoryGreg Ungerer
Move common ColdFire CPU timers.c to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: move ColdFire pit.c to its own coldfire directoryGreg Ungerer
Move common ColdFire CPU pit.c to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: move ColdFire head.S to its own coldfire directoryGreg Ungerer
Move common ColdFire CPU head.S to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: move ColdFire entry.S to its own coldfire directoryGreg Ungerer
Move common ColdFire CPU entry.S to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: platform setup for 5407 ColdFire partsGreg Ungerer
Switch to platform style configuration for 5407 ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: platform setup for 532x ColdFire partsGreg Ungerer
Switch to platform style configuration for 532x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: platform setup for 527x ColdFire partsGreg Ungerer
Switch to platform style configuration for 527x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: platform setup for 5307 ColdFire partsGreg Ungerer
Switch to platform style configuration for 5307 ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: platform setup for 528x ColdFire partsGreg Ungerer
Switch to platform style configuration for 528x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: platform setup for 5249 ColdFire partsGreg Ungerer
Switch to platform style configuration for 5249 ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: platform setup for 5272 ColdFire partsGreg Ungerer
Switch to platform style configuration for 5272 ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: platform setup for 520x ColdFire partsGreg Ungerer
Switch to platform style configuration for 520x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: platform setup for 523x ColdFire partsGreg Ungerer
Switch to platform style configuration for 523x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: platform setup for 5206e ColdFire partsGreg Ungerer
Switch to platform style configuration for 5206e ColdFire parts. Initial support is for the UARTs. DMA support is moved to common code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: platform setup for 5206 ColdFire partsGreg Ungerer
Switch to platform style configuration for 5206 ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: configure support for new ColdFire serial driverGreg Ungerer
Add configure support for new ColdFire serial driver. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 15:05:43 +0000