summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-10-04ASoC: omap-abe-twl6040: Fix typo of VibratorPeter Ujfalusi
It is not Vinrator but Vibrator. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-28ASoC: codecs: Add DA9055 codec driverAshish Chavan
This patch adds support for Dialog semiconductor's DA9055 audio codec. This has been tested on DA9055 EVB with Samsung SMDK6410 board. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <david.chen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-28ASoC: eukrea-tlv320: Convert it to platform driverFabio Estevam
Convert eukrea-tlv320 to platform driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-28ALSA: ASoC: add DT bindings for CS4271Daniel Mack
Apart from pure matching, the bindings also support setting the the reset gpio line. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Alexander Sverdlin <subaparts@yandex.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-28ASoC: wm_hubs: Ensure volume updates are handled during class W startupMark Brown
In some circumstances we may need to flush volume updates to the device after switching to class W mode. Do this unconditionally to ensure that these situations are handled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-09-27ASoC: wm5110: Adding missing volume update bitsCharles Keepax
The volume update bits were being set on all but one input and one output. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-09-26ASoC: wm5110: Add OUT3R supportMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm5110: Add AEC loopback supportMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm5110: Rename EPOUT to HPOUT3Mark Brown
The third output on WM5110 is a general purpose headphone output which can be used to drive an earpice rather than a dedicated earpiece driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: arizona: Add more clock ratesMark Brown
Some devices support additional clock rates. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: arizona: Add more DSP options for mixer input muxesMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm0010: Initialise chip state before we register the interruptMark Brown
The interrupt handler uses the chip state. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm0010: Don't check if reset GPIO is defined when removingMark Brown
We will fail to probe without one. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm0010: Allow slow GPIO for resetMark Brown
We never set the GPIO from atomic context so there's no reason why we can't support a GPIO that needs to sleep when configuring. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm5110: Enable bypass mode for MICVDDMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: wm5102: Enable bypass mode for MICVDDMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26ASoC: dapm: Allow regulators to bypass as well as disable when idleMark Brown
Allow regulators managed via DAPM to make use of the bypass support that has recently been added to the regulator API by setting a flag SND_SOC_DAPM_REGULATOR_BYPASS. When this flag is set the regulator will be put into bypass mode before being disabled, allowing the regulator to fall into bypass mode if it can't be disabled due to other users. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-26Merge tag 'bypass' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into for-3.7 regulator: Bypass mode support Allow regulators to be put into a non-regulating mode bypassing the input straight to the output, mostly used by low power retention modes.
2012-09-25ASoC: cs4270: Remove mono supportFabio Estevam
According to cs4270 datasheet, there is no reference to mono mode. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22Merge remote-tracking branch 'asoc/topic/ux500' into for-3.7Mark Brown
2012-09-22ASoC: wm2000: Add regulator supportMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: wm2000: Convert to devm_regmap_init_i2c()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22Merge tag 'v3.6-rc6' into for-3.7Mark Brown
Linux 3.6-rc6 has all our bug fixes. Conflicts (trivial overlap): sound/soc/omap/am3517evm.c
2012-09-22ASoC: twl4030: Support for DT booted kernelPeter Ujfalusi
When the kernel has been booted with DT blob the platform data is NULL for the driver. We need to construct the pdata based on the DT information for runtime use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: twl4030: Add pointer to pdata within the private dataPeter Ujfalusi
Access the pdata via a pointer within the twl4030_priv structure. In preparation for DeviceTree support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: twl4030: Convert to use devm_kzallocPeter Ujfalusi
Allocate the private data with devm_kzalloc. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC/mfd: twl4030: Remove set_hs_extmute callback from platform dataPeter Ujfalusi
We no longer have users for the set_hs_extmute callback which has been replaced by hs_extmute_gpio so the codec driver can handle the external mute if it is needed by the board. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIOPeter Ujfalusi
Remove the use of set_hs_extmute callback and let the codec driver to handle the extmute GPIO. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: twl4030: Move hs_extmute GPIO handling to driverPeter Ujfalusi
The external mute (if it is in use) is handled by a GPIO line. Prepare to remove the set_hs_extmute callback and replace it with: hs_extmute_gpio: the GPIO number to use for external mute When the users of set_hs_extmute has been converted the callback can be removed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22Input: twl4030-vibra: Support for DT booted kernelPeter Ujfalusi
Add support when the kernel has been booted with DT blob. In this case the pdata is NULL, we need to reach up to the core node and check if the codec part has been enabled to determine if we need to coexist with the codec or not. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22mfd: twl4030-audio: Add DT supportPeter Ujfalusi
Support for loading the twl4030 audio module via devicetree. Sub devices for codec and vibra will be created as mfd devices once the core MFD driver is loaded when the kernel is booted with a DT blob. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22dt: Add empty of_find_node_by_name() functionPeter Ujfalusi
This commit adds an empty of_find_node_by_name() function for !CONFIG_OF builds. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22mfd: twl4030-audio: Get audio MCLK via twl-core API instead of pdataPeter Ujfalusi
twl-core has API to get the boot time configured HFCLK rate which has the same rate as the audio MCLK. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22mfd: twl-core: Add API to query the HFCLK ratePeter Ujfalusi
CFG_BOOT register's HFCLK_FREQ field hold information about the used HFCLK frequency. Add possibility for users to get the configured rate based on this register. This register was configured during boot, without it the chip would not operate correctly, so we can trust on this information. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22mfd: twl4030-audio: Rearange and clean-up the probe functionPeter Ujfalusi
To facilitate the device tree support the probe function need to be rearanged. Small cleanup in the APLL frequency selection part as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22mfd: twl4030-audio: Convert to use devm_kzallocPeter Ujfalusi
To clean up the module probe and remove functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22mfd: twl4030-audio: Clean up MODULE_* and platform_driver partPeter Ujfalusi
Place the MODULE_* lines in the same block and add MODULE_DESCRIPTION. Rearange the platform_driver structure at the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-pcm: Convert to use dmaenginePeter Ujfalusi
Original author: Russell King <rmk+kernel@arm.linux.org.uk> Switch the omap-pcm to use dmaengine. Certain features are not supported by after dmaengine conversion: 1. No period wakeup mode DMA engine has no way to communicate this information through standard channels. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: OMAP: mcbsp, mcpdm, dmic, hdmi: Set dma_data at startup timePeter Ujfalusi
Set the dma_data for the stream (snd_soc_dai_set_dma_data) at dai_startup time so omap-pcm will have access to the needed information regarding to the DMA channel earlier. This is needed for the clean dmaengine support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-pcm, omap-dmic: Change the use of omap_pcm_dma_data->data_typePeter Ujfalusi
Instead of the OMAP DMA data type definition the data_type will be used to specify the number of bits the DMA word should be configured or 0 in case when based on the stream's format the omap-pcm can decide the needed DMA word size. This feature is needed for the omap-hdmi where the sDMA need to be configured for 32bit word type regardless of the audio format used. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: OMAP: mcbsp, mcpdm, dmic: Let omap-pcm to pick the dma_typePeter Ujfalusi
omap-pcm can figure out the correct dma_type based on the stream's format. In this way we can get rid of the plat/dma.h include from these drivers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-mcpdm: Use platform_get_resource_* to get resourcesPeter Ujfalusi
Get the needed resources in a correct way and avoid using defines for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ARM: OMAP4: hwmod_data: Add resource names to McPDM memory rangesPeter Ujfalusi
To help the driver to get the correct memory range to access McPDM registers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-pcm: Prepare to configure the DMA data_type based on stream ↵Peter Ujfalusi
properties Based on the format of the stream the omap-pcm can decide alone what data type should be used with by the sDMA. Keep the possibility for OMAP dai drivers to tell omap-pcm if they want to use different data type. This is needed for the omap-hdmi for example which needs 32bit data type even if the stream format is S16_LE. The check if (dma_data->data_type) is safe at the moment since omap-pcm does not support 8bit samples (OMAP_DMA_DATA_TYPE_S8 == 0x00). The next step is to redefine the meaning of dma_data->data_type to unblock this limitation. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: OMAP: Remove sync_mode from omap_pcm_dma_data structPeter Ujfalusi
The omap-pcm platform driver no longer needs this parameter to select between ELEMENT and PACKET mode. The selection is based on the configured packet_size. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-pcm: Select sDMA synchronization based on packet_sizePeter Ujfalusi
Since we only have element or packet synchronization we can use the dma_data->packet_size to select the desired mode: if packet_size is 0 we use ELEMENT mode if packet_size is not 0 we use PACKET mode for sDMA synchronization. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: omap-mcbsp: Use sDMA packet mode instead of frame modePeter Ujfalusi
When McBSP is configured in threshold mode we can use sDMA packet mode in all cases. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22dmaengine: omap-dma: Add support to suppress interrupts in cyclic modePeter Ujfalusi
When requested (DMA_PREP_INTERRUPT is cleared in flags) disable all DMA interrupts for the channel. In this mode user space does not expect periodic reports from kernel about the progress of the audio stream. PulseAudio for example support this type of mode. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22dmaengine: Pass flags via device_prep_dma_cyclic() callbackPeter Ujfalusi
Change the parameter list of device_prep_dma_cyclic() so the DMA drivers can receive the flags coming from clients. This feature can be used during audio operation to disable all audio related interrupts when the DMA_PREP_INTERRUPT is cleared from the flags. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22dmaengine: omap: Add support for pause/resume in cyclic dma modePeter Ujfalusi
The audio stack used omap_stop_dma/omap_start_dma to pause/resume the DMA. This method has been used for years on OMAP based products. We only allow pause/resume when the DMA has been configured in cyclic mode which is used by the audio stack. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 22:45:44 +0000