summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-01-04imx: add polled io uart methodsSaleem Abdulrasool
These methods are invoked if the iMX uart is used in conjuction with kgdb during early boot. In order to access the UART without the interrupts, the kernel uses the basic polling methods for IO with the device. With these methods implemented, it is now possible to enable kgdb during early boot over serial. Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org> Signed-off-by: Dirk Behme <dirk.behme@gmail.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Fabio Estevam <festevam@gmail.com> CC: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> CC: linux-serial@vger.kernel.org CC: Alan Cox <alan@linux.intel.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04imx: Add save/restore functions for UART control regsDirk Behme
Factor out the uart save/restore functionality instead of having the same code several times in the driver. Signed-off-by: Dirk Behme <dirk.behme@gmail.com> CC: Saleem Abdulrasool <compnerd@compnerd.org> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Fabio Estevam <festevam@gmail.com> CC: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> CC: linux-serial@vger.kernel.org CC: Alan Cox <alan@linux.intel.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04serial/imx: let probing fail for the dt case without a valid aliasUwe Kleine-König
When the uart device is instantiated by dt but dt doesn't provide an alias then better let probing fail instead of falling back to an unrelated device id used for the line number and no platform data. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04serial/imx: propagate error from of_alias_get_id instead of using -ENODEVUwe Kleine-König
A quick look at of_alias_get_id shows that in the error case it returns -ENODEV, too, but still it's better style to propagate the value as is. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Alan Cox <alan@linux.intel.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Jason Liu <jason.hui@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Jason Liu <jason.hui@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04tty: serial: imx: Allow UART to be a source for wakeupFabio Estevam
Allow UART to be a source for wakeup from low power mode. Tested on a MX27PDK by doing: echo enabled > /sys/devices/platform/imx21-uart.0/tty/ttymxc0/power/wakeup echo mem > /sys/power/state and then pressing a key in the console will wakeup the sytem. Suggested-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04serial: driver for m32 arch should not have DEC alpha errataPaul Gortmaker
This driver was copied from the original 8250 driver and hence got the DEC alpha errata workaround. But the workaround is ugly and we don't really want it in any more places than it absolutely needs to be. Obviously ARCH=m32r means ARCH != alpha, so just remove the references to the ALPHA_KLUDGE_MCR define. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04serial/documentation: fix documented name of DCD cpp symbolUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Alan Cox <alan@linux.intel.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04atmel_serial: fix spinlock lockup in RS485 codeClaudio Scordino
Patch to fix a spinlock lockup in the driver that sometimes happens when the tasklet starts. Signed-off-by: Claudio Scordino <claudio@evidence.eu.com> Signed-off-by: Dave Bender <codehero@gmail.com> Tested-by: Dave Bender <codehero@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04tty: Fix memory leak in virtual console when enable unicode translationZeng Zhaoming
Virtual console unicode translation map leaks with following message when enable kmemleak: unreferenced object 0xeb5ec450 (size 192): comm "setfont", pid 665, jiffies 4294899028 (age 3696.220s) hex dump (first 32 bytes): e0 5b 9d eb 00 00 00 00 00 00 00 00 80 b9 ea eb .[.............. b0 5a 9d eb 00 00 00 00 00 00 00 00 00 00 00 00 .Z.............. backtrace: [<c1533f8c>] kmemleak_alloc+0x3c/0xa0 [<c114acc2>] kmem_cache_alloc_trace+0xe2/0x250 [<c13498e8>] con_clear_unimap+0x78/0xd0 [<c1345552>] vt_ioctl+0x1562/0x1d00 [<c133aa00>] tty_ioctl+0x230/0x7c0 [<c1171519>] do_vfs_ioctl+0x79/0x2d0 [<c11717df>] sys_ioctl+0x6f/0x80 [<c156601f>] sysenter_do_call+0x12/0x38 [<ffffffff>] 0xffffffff unreferenced object 0xeb9d5be0 (size 128): comm "setfont", pid 660, jiffies 4294899030 (age 3696.212s) hex dump (first 32 bytes): 60 c2 a6 eb 50 c8 a6 eb c0 54 9d eb 80 59 9d eb `...P....T...Y.. 90 53 9d eb 60 52 9d eb 60 92 9b eb 00 00 00 00 .S..`R..`....... backtrace: [<c1533f8c>] kmemleak_alloc+0x3c/0xa0 [<c114acc2>] kmem_cache_alloc_trace+0xe2/0x250 [<c134938c>] con_insert_unipair+0x7c/0x150 [<c1349f8c>] con_set_unimap+0x15c/0x1f0 [<c13456fb>] vt_ioctl+0x170b/0x1d00 [<c133aa00>] tty_ioctl+0x230/0x7c0 [<c1171519>] do_vfs_ioctl+0x79/0x2d0 [<c11717df>] sys_ioctl+0x6f/0x80 [<c156601f>] sysenter_do_call+0x12/0x38 [<ffffffff>] 0xffffffff The leak caused by con_set_default_unimap() not correct free the old map. Signed-off-by: Zeng Zhaoming <zengzm.kernel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04serial: use DIV_ROUND_CLOSEST instead of open coding itUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-03serial: add support for 400 and 800 v3 series Titan cardsYegor Yefremov
add support for 400Hv3, 410Hv3 and 800Hv3 Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-13serial: bfin-uart: Remove ASYNC_CTS_FLOW flag for hardware automatic CTS.Sonic Zhang
Blackfin uart supports automatic CTS trigger when hardware flow control is enabled. No need to start and top tx in CTS interrupt. So, remote ASYNC_CTS_FLOW flag. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-13serial: bfin-uart: Enable hardware automatic CTS only when CTS pin is available.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-13serial: make FSL errata depend on 8250_CONSOLE, not just 8250Paul Gortmaker
The recent commit "serial: add irq handler for Freescale 16550 errata" would allow Kconfig choices that had 8250 support as a module and yet still try and build in the errata fix non-modular, resulting in build failures for some non-embedded PPC targets. Since we hook in the errata fix from legacy_serial.c, which is built only for PPC_UDBG_16550, and since the errata is only really relevant for SysRQ on serial console, tighten up the dependencies to be exactly that. We'll get coverage on the relevant Freescale boards because the Kconfig for their CPU types all select the PPC_UDBG_16550 option, and the defconfigs also all select the 8250_CONSOLE option. Also, the 8250_CONSOLE option has a strict dependency on "SERIAL_8250=y" which resolves the reported problem for non Freescale targets. Reported-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Tested-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09serial: add irq handler for Freescale 16550 errata.Paul Gortmaker
Sending a break on the SOC UARTs found in some MPC83xx/85xx/86xx chips seems to cause a short lived IRQ storm (/proc/interrupts typically shows somewhere between 300 and 1500 events). Unfortunately this renders SysRQ over the serial console completely inoperable. The suggested workaround in the errata is to read the Rx register, wait one character period, and then read the Rx register again. We achieve this by tracking the old LSR value, and on the subsequent interrupt event after a break, we don't read LSR, instead we just read the RBR again and return immediately. The "fsl,ns16550" is used in the compatible field of the serial device to mark UARTs known to have this issue. Thanks to Scott Wood for providing the errata data which led to a much cleaner fix. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09serial: manually inline serial8250_handle_portPaul Gortmaker
Currently serial8250_handle_irq is a trivial wrapper around serial8250_handle_port, which actually does all the work. Since there are no other callers of serial8250_handle_port, we can just move it inline into serial8250_handle_irq. This also makes it more clear what functionality any custom IRQ handlers need to provide if not using serial8250_default_handle_irq. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09serial: make 8250 timeout use the specified IRQ handlerPaul Gortmaker
The current 8250 timeout code duplicates the code path in serial8250_default_handle_irq and then serial8250_handle_irq i.e. reading iir, check for IIR_NO_INT, and then calling serial8250_handle_port. So the immediate thought is to replace the duplicated code with a call to serial8250_default_handle_irq. But this highlights a problem. We let 8250 driver variants use their own IRQ handler via specifying their own custom ->handle_irq, but in the event of a timeout, we ignore their handler and implicitly run serial8250_default_handle_irq instead. So, go through the struct to get ->handle_irq and call that, which for most will still be serial8250_default_handle_irq. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09serial: export the key functions for an 8250 IRQ handlerPaul Gortmaker
For drivers that need to construct their own IRQ handler, the three components are seen in the current handle_port -- i.e. Rx, Tx and modem_status. Make these exported symbols so that "almost" 8250 UARTs can construct their own IRQ handler with these shared components, while working around their own unique errata issues. The function names are given a serial8250 prefix, since they are now entering the global namespace. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09serial: clean up parameter passing for 8250 Rx IRQ handlingPaul Gortmaker
The receive_chars() was taking a pointer to a passed in LSR value in status and knocking off bits as it processed them. But since receive_chars isn't returning a value, we can instead pass in a normal non-pointer value for LSR, and simply return the residual (unprocessed) LSR once it is done. The value in this cleanup, is that it clarifies the API of the receive_chars prior to exporting it to other 8250-like drivers for shared usage. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09serial: move struct uart_8250_port from 8250.c to 8250.hPaul Gortmaker
Since we want to promote sharing and move away from one single uart driver with a bunch of platform specific bugfixes all munged into one, relocate some header like material from the C file to the header. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09drivers/tty: Remove unneeded spacesThorsten Wißmann
coding style fixes in n_tty.c Signed-off-by: Maximilian Krüger <maxfragg@gmail.com> Signed-off-by: Thorsten Wißmann <re06huxa@cip.cs.fau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09msm_serial_hs: Fix spinlock recursion in handling CTSMayank Rana
msm_hs_handle_delta_cts tries to acquire port->lock already acquired by the callee function msm_hs_isr. Change function name to follow "_locked" convention. Signed-off-by: Mayank Rana <mrana@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09msm_serial_hs: Fix type inconsistency for tx and rx command_ptr_ptrMayank Rana
Both tx and rx command_ptr_ptr are of type u32*. While allocating memory for it, sizeof(u32 *) is used as part of kmalloc API instead of sizeof(u32). ADM Hardare requires size of command_ptr_ptr as 1 Word. Both sizeof(u32 *) and sizeof(u32) are same on 32-bit architecture whereas sizeof(u32 *) would be different in size compare to sizeof(u32) on anyother architecture. Hence correct usage of sizeof(command_ptr_ptr) for Tx and Rx with kmalloc and dma_(map/unmap)_single APIs. Signed-off-by: Mayank Rana <mrana@codeaurora.org> Reported-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09serial: fix serial_cs I/O windows for Argosy RS-COM 2PMaciej Szmigiero
Current serial_cs driver has a problem when trying to detect whether a card has multiple ports: serial_config() calls pcmcia_loop_config() which iterates over card CIS configurations by calling serial_check_for_multi() for each of them. This function wants to check (and select) a configuration that has either one long I/O window spanning multiple ports or two 8-port windows for two serial ports. Problem is, that every pcmcia_loop_config() iteration only updates the windows (via pcmcia_do_loop_config() in resource[0] and resource[1]) when CONF_AUTO_SET_IO flag is set on the device, which is set only later in the code. Fix it by setting this flag earlier. In addition to this, when multi-port card is detected and it does not have an one, long I/O window multi_config_check_notpicky() tries to locate two I/O windows and assumes they are continuous without checking. On an Argosy RS-COM 2P this selects first configuration, which unfortunately has two non-continuous I/O windows. The net effect is that the second serial port on the card does not work. Fix it by checking whether the windows are really continuous. Signed-off-by: Maciej Szmigiero <mhej@o2.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09serial: 8250: replace hardcoded 0xbf with #defineWolfram Sang
Makes it easier to find all occurences requesting CONF_MODE_B. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09serial: bfin-sport-uart: Add tty ASYNC_CTS_FLOW flag to do CTS flow control.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09serial: bfin-sport-uart: Request CTS GPIO PIN when the sport emulated serial ↵Sonic Zhang
device starts up. This patch is similar to that for bfin-uart hardware flow control. Sport emulated serial device may be probed earlier before GPIOLIB is initialized. Requesting and configuring CTS GPIO PIN fails in that early stage. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09tty: bfin-sport-uart: Rx interrupt is not called always with irq disabled.Sonic Zhang
Replace local_irq_disable by local_irq_save. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09serial: bfin-uart: remove redundant CTS check for hardware CTS control.Sonic Zhang
Blackfin hardware CTS control generate interrupt for both CTS on and off. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09serial: bfin-uart: Add tty ASYNC_CTS_FLOW flag to do CTS flow control.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09serial: bfin-uart: Request CTS GPIO PIN when the serial device starts up.Sonic Zhang
Serial device may be probed earlier before GPIOLIB is initialized. Requesting and configuring CTS GPIO PIN fails in that early stage. Do it when the serial device really starts up. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-30tty: n_hdlc not atomic use tty->flags.Ilya Zykov
N_HDLC can spoil tty->flags because use not atomic operations on tty->flags. I use n_hdlc line discipline and it happens. Signed-off-by: Ilya Zykov <ilya@ilyx.ru> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-30TTY: serial: convert drivers/tty/serial/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/tty/serial/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jamie Iles <jamie@jamieiles.com> Cc: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-30parport: convert drivers/parport/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/parport/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Ben Dooks <ben@simtec.co.uk> Cc: Derrick J. Brashear <shadow@dementia.org> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26TTY: Remove redundant spi driver bus initializationLars-Peter Clausen
In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_driver_register(), so we can drop the manual assignment. The patch was generated using the following coccinelle semantic patch: // <smpl> @@ identifier _driver; @@ struct spi_driver _driver = { .driver = { - .bus = &spi_bus_type, }, }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26serial/8250_pci: init-quirk msi support for kt serial controllerDan Williams
The semantics of UPF_IIR_ONCE (once per serial irq) are only guaranteed if the kt irq is not shared (once per serial isr in the shared case == potentially unwanted reads of the IIR). Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26serial/8250_pci: setup-quirk workaround for the kt serial controllerDan Williams
Workaround dropped notifications in the iir register. Prevent reads coincident with new interrupt notifications by reading the iir at most once per interrupt. Reported-by: Nhan H Mai <nhan.h.mai@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26serial/mxs-auart: only wake up tty layer onceUwe Kleine-König
There is no need to call uart_write_wakeup after each character send. Once at the end of the write sequence is enough. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26serial/imx: propagate error of platform_driver_register in init routineUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26OMAP: UART: fix the return type of check_modem_statusShubhrajyoti D
The function check_modem_status returns an int currently it is stored in a char. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26Merge 3.2-rc3 into tty-next to handle merge conflict in tty_ldisc.cGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-23Linux 3.2-rc3Linus Torvalds
2011-11-23Merge git://github.com/rustyrussell/linuxLinus Torvalds
* git://github.com/rustyrussell/linux: virtio-pci: make reset operation safer virtio-mmio: Correct the name of the guest features selector virtio: add HAS_IOMEM dependency to MMIO platform bus driver
2011-11-24virtio-pci: make reset operation saferMichael S. Tsirkin
virtio pci device reset actually just does an I/O write, which in PCI is really posted, that is it can complete on CPU before the device has received it. Further, interrupts might have been pending on another CPU, so device callback might get invoked after reset. This conflicts with how drivers use reset, which is typically: reset unregister a callback running after reset completed can race with unregister, potentially leading to use after free bugs. Fix by flushing out the write, and flushing pending interrupts. This assumes that device is never reset from its vq/config callbacks, or in parallel with being added/removed, document this assumption. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-24virtio-mmio: Correct the name of the guest features selectorSasha Levin
Guest features selector spelling mistake. Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-24virtio: add HAS_IOMEM dependency to MMIO platform bus driverHeiko Carstens
Fix this compile error on s390: CC [M] drivers/virtio/virtio_mmio.o drivers/virtio/virtio_mmio.c: In function 'vm_get_features': drivers/virtio/virtio_mmio.c:107:2: error: implicit declaration of function 'writel' Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-23Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-devLinus Torvalds
* 'upstream-linus' of git://github.com/jgarzik/libata-dev: libata: fix build without BMDMA [libata] ahci_platform: fix DT probing
2011-11-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDs PCI: pciehp: wait 100 ms after Link Training check PCI: pciehp: wait 1000 ms before Link Training check PCI: pciehp: Retrieve link speed after link is trained PCI: Let PCI_PRI depend on PCI PCI: Fix compile errors with PCI_ATS and !PCI_IOV PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplug
2011-11-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: Extend array bounds for all filename chars eCryptfs: Flush file in vma close eCryptfs: Prevent file create race condition
2011-11-23eCryptfs: Extend array bounds for all filename charsTyler Hicks
From mhalcrow's original commit message: Characters with ASCII values greater than the size of filename_rev_map[] are valid filename characters. ecryptfs_decode_from_filename() will access kernel memory beyond that array, and ecryptfs_parse_tag_70_packet() will then decrypt those characters. The attacker, using the FNEK of the crafted file, can then re-encrypt the characters to reveal the kernel memory past the end of the filename_rev_map[] array. I expect low security impact since this array is statically allocated in the text area, and the amount of memory past the array that is accessible is limited by the largest possible ASCII filename character. This patch solves the issue reported by mhalcrow but with an implementation suggested by Linus to simply extend the length of filename_rev_map[] to 256. Characters greater than 0x7A are mapped to 0x00, which is how invalid characters less than 0x7A were previously being handled. Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Reported-by: Michael Halcrow <mhalcrow@google.com> Cc: stable@kernel.org
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 19:46:18 +0000