diff options
Diffstat (limited to 'tools/testing')
31 files changed, 466 insertions, 411 deletions
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 40631569a0fd..55ab700f6ba5 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -72,7 +72,7 @@ my %default = ( "IGNORE_UNUSED" => 0, ); -my $ktest_config; +my $ktest_config = "ktest.conf"; my $version; my $have_version = 0; my $machine; @@ -149,7 +149,6 @@ my $bisect_ret_abort; my $bisect_ret_default; my $in_patchcheck = 0; my $run_test; -my $redirect; my $buildlog; my $testlog; my $dmesg; @@ -522,7 +521,7 @@ sub read_ync { return read_prompt 1, $prompt; } -sub get_ktest_config { +sub get_mandatory_config { my ($config) = @_; my $ans; @@ -553,29 +552,29 @@ sub get_ktest_config { } } -sub get_ktest_configs { - get_ktest_config("MACHINE"); - get_ktest_config("BUILD_DIR"); - get_ktest_config("OUTPUT_DIR"); +sub get_mandatory_configs { + get_mandatory_config("MACHINE"); + get_mandatory_config("BUILD_DIR"); + get_mandatory_config("OUTPUT_DIR"); if ($newconfig) { - get_ktest_config("BUILD_OPTIONS"); + get_mandatory_config("BUILD_OPTIONS"); } # options required for other than just building a kernel if (!$buildonly) { - get_ktest_config("POWER_CYCLE"); - get_ktest_config("CONSOLE"); + get_mandatory_config("POWER_CYCLE"); + get_mandatory_config("CONSOLE"); } # options required for install and more if ($buildonly != 1) { - get_ktest_config("SSH_USER"); - get_ktest_config("BUILD_TARGET"); - get_ktest_config("TARGET_IMAGE"); + get_mandatory_config("SSH_USER"); + get_mandatory_config("BUILD_TARGET"); + get_mandatory_config("TARGET_IMAGE"); } - get_ktest_config("LOCALVERSION"); + get_mandatory_config("LOCALVERSION"); return if ($buildonly); @@ -583,7 +582,7 @@ sub get_ktest_configs { if (!defined($rtype)) { if (!defined($opt{"GRUB_MENU"})) { - get_ktest_config("REBOOT_TYPE"); + get_mandatory_config("REBOOT_TYPE"); $rtype = $entered_configs{"REBOOT_TYPE"}; } else { $rtype = "grub"; @@ -591,16 +590,16 @@ sub get_ktest_configs { } if ($rtype eq "grub") { - get_ktest_config("GRUB_MENU"); + get_mandatory_config("GRUB_MENU"); } if ($rtype eq "grub2") { - get_ktest_config("GRUB_MENU"); - get_ktest_config("GRUB_FILE"); + get_mandatory_config("GRUB_MENU"); + get_mandatory_config("GRUB_FILE"); } if ($rtype eq "syslinux") { - get_ktest_config("SYSLINUX_LABEL"); + get_mandatory_config("SYSLINUX_LABEL"); } } @@ -1090,7 +1089,7 @@ sub read_config { $test_case = __read_config $config, \$test_num; # make sure we have all mandatory configs - get_ktest_configs; + get_mandatory_configs; # was a test specified? if (!$test_case) { @@ -1529,7 +1528,7 @@ sub fail { } sub run_command { - my ($command) = @_; + my ($command, $redirect) = @_; my $dolog = 0; my $dord = 0; my $pid; @@ -2265,9 +2264,7 @@ sub build { # Run old config regardless, to enforce min configurations make_oldconfig; - $redirect = "$buildlog"; - my $build_ret = run_command "$make $build_options"; - undef $redirect; + my $build_ret = run_command "$make $build_options", $buildlog; if (defined($post_build)) { # Because a post build may change the kernel version @@ -2360,9 +2357,7 @@ sub child_run_test { $poweroff_on_error = 0; $die_on_failure = 1; - $redirect = "$testlog"; - run_command $run_test or $failed = 1; - undef $redirect; + run_command $run_test, $testlog or $failed = 1; exit $failed; } @@ -2789,12 +2784,17 @@ my %dependency; sub assign_configs { my ($hash, $config) = @_; + doprint "Reading configs from $config\n"; + open (IN, $config) or dodie "Failed to read $config"; while (<IN>) { + chomp; if (/^((CONFIG\S*)=.*)/) { ${$hash}{$2} = $1; + } elsif (/^(# (CONFIG\S*) is not set)/) { + ${$hash}{$2} = $1; } } @@ -2807,27 +2807,6 @@ sub process_config_ignore { assign_configs \%config_ignore, $config; } -sub read_current_config { - my ($config_ref) = @_; - - %{$config_ref} = (); - undef %{$config_ref}; - - my @key = keys %{$config_ref}; - if ($#key >= 0) { - print "did not delete!\n"; - exit; - } - open (IN, "$output_config"); - - while (<IN>) { - if (/^(CONFIG\S+)=(.*)/) { - ${$config_ref}{$1} = $2; - } - } - close(IN); -} - sub get_dependencies { my ($config) = @_; @@ -2846,53 +2825,97 @@ sub get_dependencies { return @deps; } +sub save_config { + my ($pc, $file) = @_; + + my %configs = %{$pc}; + + doprint "Saving configs into $file\n"; + + open(OUT, ">$file") or dodie "Can not write to $file"; + + foreach my $config (keys %configs) { + print OUT "$configs{$config}\n"; + } + close(OUT); +} + sub create_config { - my @configs = @_; + my ($name, $pc) = @_; - open(OUT, ">$output_config") or dodie "Can not write to $output_config"; + doprint "Creating old config from $name configs\n"; - foreach my $config (@configs) { - print OUT "$config_set{$config}\n"; - my @deps = get_dependencies $config; - foreach my $dep (@deps) { - print OUT "$config_set{$dep}\n"; + save_config $pc, $output_config; + + make_oldconfig; +} + +# compare two config hashes, and return configs with different vals. +# It returns B's config values, but you can use A to see what A was. +sub diff_config_vals { + my ($pa, $pb) = @_; + + # crappy Perl way to pass in hashes. + my %a = %{$pa}; + my %b = %{$pb}; + + my %ret; + + foreach my $item (keys %a) { + if (defined($b{$item}) && $b{$item} ne $a{$item}) { + $ret{$item} = $b{$item}; } } - # turn off configs to keep off - foreach my $config (keys %config_off) { - print OUT "# $config is not set\n"; - } + return %ret; +} - # turn off configs that should be off for now - foreach my $config (@config_off_tmp) { - print OUT "# $config is not set\n"; - } +# compare two config hashes and return the configs in B but not A +sub diff_configs { + my ($pa, $pb) = @_; + + my %ret; + + # crappy Perl way to pass in hashes. + my %a = %{$pa}; + my %b = %{$pb}; - foreach my $config (keys %config_ignore) { - print OUT "$config_ignore{$config}\n"; + foreach my $item (keys %b) { + if (!defined($a{$item})) { + $ret{$item} = $b{$item}; + } } - close(OUT); - make_oldconfig; + return %ret; } +# return if two configs are equal or not +# 0 is equal +1 b has something a does not +# +1 if a and b have a different item. +# -1 if a has something b does not sub compare_configs { - my (%a, %b) = @_; + my ($pa, $pb) = @_; - foreach my $item (keys %a) { - if (!defined($b{$item})) { - print "diff $item\n"; + my %ret; + + # crappy Perl way to pass in hashes. + my %a = %{$pa}; + my %b = %{$pb}; + + foreach my $item (keys %b) { + if (!defined($a{$item})) { + return 1; + } + if ($a{$item} ne $b{$item}) { return 1; } - delete $b{$item}; } - my @keys = keys %b; - if ($#keys) { - print "diff2 $keys[0]\n"; + foreach my $item (keys %a) { + if (!defined($b{$item})) { + return -1; + } } - return -1 if ($#keys >= 0); return 0; } @@ -2900,24 +2923,13 @@ sub compare_configs { sub run_config_bisect_test { my ($type) = @_; - return run_bisect_test $type, "oldconfig"; -} + my $ret = run_bisect_test $type, "oldconfig"; -sub process_passed { - my (%configs) = @_; - - doprint "These configs had no failure: (Enabling them for further compiles)\n"; - # Passed! All these configs are part of a good compile. - # Add them to the min options. - foreach my $config (keys %configs) { - if (defined($config_list{$config})) { - doprint " removing $config\n"; - $config_ignore{$config} = $config_list{$config}; - delete $config_list{$config}; - } + if ($bisect_manual) { + $ret = answer_bisect; } - doprint "config copied to $outputdir/config_good\n"; - run_command "cp -f $output_config $outputdir/config_good"; + + return $ret; } sub process_failed { @@ -2928,253 +2940,225 @@ sub process_failed { doprint "***************************************\n\n"; } -sub run_config_bisect { +# used for config bisecting +my $good_config; +my $bad_config; - my @start_list = keys %config_list; +sub process_new_config { + my ($tc, $nc, $gc, $bc) = @_; - if ($#start_list < 0) { - doprint "No more configs to test!!!\n"; - return -1; + my %tmp_config = %{$tc}; + my %good_configs = %{$gc}; + my %bad_configs = %{$bc}; + + my %new_configs; + + my $runtest = 1; + my $ret; + + create_config "tmp_configs", \%tmp_config; + assign_configs \%new_configs, $output_config; + + $ret = compare_configs \%new_configs, \%bad_configs; + if (!$ret) { + doprint "New config equals bad config, try next test\n"; + $runtest = 0; + } + + if ($runtest) { + $ret = compare_configs \%new_configs, \%good_configs; + if (!$ret) { + doprint "New config equals good config, try next test\n"; + $runtest = 0; + } } - doprint "***** RUN TEST ***\n"; + %{$nc} = %new_configs; + + return $runtest; +} + +sub run_config_bisect { + my ($pgood, $pbad) = @_; + my $type = $config_bisect_type; + + my %good_configs = %{$pgood}; + my %bad_configs = %{$pbad}; + + my %diff_configs = diff_config_vals \%good_configs, \%bad_configs; + my %b_configs = diff_configs \%good_configs, \%bad_configs; + my %g_configs = diff_configs \%bad_configs, \%good_configs; + + my @diff_arr = keys %diff_configs; + my $len_diff = $#diff_arr + 1; + + my @b_arr = keys %b_configs; + my $len_b = $#b_arr + 1; + + my @g_arr = keys %g_configs; + my $len_g = $#g_arr + 1; + + my $runtest = 1; + my %new_configs; my $ret; - my %current_config; - my $count = $#start_list + 1; - doprint " $count configs to test\n"; + # First, lets get it down to a single subset. + # Is the problem with a difference in values? + # Is the problem with a missing config? + # Is the problem with a config that breaks things? - my $half = int($#start_list / 2); + # Enable all of one set and see if we get a new bad + # or good config. - do { - my @tophalf = @start_list[0 .. $half]; + # first set the good config to the bad values. - # keep the bottom half off - if ($half < $#start_list) { - @config_off_tmp = @start_list[$half + 1 .. $#start_list]; - } else { - @config_off_tmp = (); - } + doprint "d=$len_diff g=$len_g b=$len_b\n"; - create_config @tophalf; - read_current_config \%current_config; - - $count = $#tophalf + 1; - doprint "Testing $count configs\n"; - my $found = 0; - # make sure we test something - foreach my $config (@tophalf) { - if (defined($current_config{$config})) { - logit " $config\n"; - $found = 1; - } - } - if (!$found) { - # try the other half - doprint "Top half produced no set configs, trying bottom half\n"; - - # keep the top half off - @config_off_tmp = @tophalf; - @tophalf = @start_list[$half + 1 .. $#start_list]; - - create_config @tophalf; - read_current_config \%current_config; - foreach my $config (@tophalf) { - if (defined($current_config{$config})) { - logit " $config\n"; - $found = 1; - } - } - if (!$found) { - doprint "Failed: Can't make new config with current configs\n"; - foreach my $config (@start_list) { - doprint " CONFIG: $config\n"; - } - return -1; + # first lets enable things in bad config that are enabled in good config + + if ($len_diff > 0) { + if ($len_b > 0 || $len_g > 0) { + my %tmp_config = %bad_configs; + + doprint "Set tmp config to be bad config with good config values\n"; + foreach my $item (@diff_arr) { + $tmp_config{$item} = $good_configs{$item}; } - $count = $#tophalf + 1; - doprint "Testing $count configs\n"; - } - $ret = run_config_bisect_test $type; - if ($bisect_manual) { - $ret = answer_bisect; - } - if ($ret) { - process_passed %current_config; - return 0; + $runtest = process_new_config \%tmp_config, \%new_configs, + \%good_configs, \%bad_configs; } + } - doprint "This config had a failure.\n"; - doprint "Removing these configs that were not set in this config:\n"; - doprint "config copied to $outputdir/config_bad\n"; - run_command "cp -f $output_config $outputdir/config_bad"; + if (!$runtest && $len_diff > 0) { - # A config exists in this group that was bad. - foreach my $config (keys %config_list) { - if (!defined($current_config{$config})) { - doprint " removing $config\n"; - delete $config_list{$config}; - } + if ($len_diff == 1) { + process_failed $diff_arr[0]; + return 1; } + my %tmp_config = %bad_configs; - @start_list = @tophalf; + my $half = int($#diff_arr / 2); + my @tophalf = @diff_arr[0 .. $half]; - if ($#start_list == 0) { - process_failed $start_list[0]; - return 1; + doprint "Settings bisect with top half:\n"; + doprint "Set tmp config to be bad config with some good config values\n"; + foreach my $item (@tophalf) { + $tmp_config{$item} = $good_configs{$item}; } - # remove half the configs we are looking at and see if - # they are good. - $half = int($#start_list / 2); - } while ($#start_list > 0); + $runtest = process_new_config \%tmp_config, \%new_configs, + \%good_configs, \%bad_configs; - # we found a single config, try it again unless we are running manually + if (!$runtest) { + my %tmp_config = %bad_configs; - if ($bisect_manual) { - process_failed $start_list[0]; - return 1; - } + doprint "Try bottom half\n"; - my @tophalf = @start_list[0 .. 0]; + my @bottomhalf = @diff_arr[$half+1 .. $#diff_arr]; - $ret = run_config_bisect_test $type; - if ($ret) { - process_passed %current_config; + foreach my $item (@bottomhalf) { + $tmp_config{$item} = $good_configs{$item}; + } + + $runtest = process_new_config \%tmp_config, \%new_configs, + \%good_configs, \%bad_configs; + } + } + + if ($runtest) { + $ret = run_config_bisect_test $type; + if ($ret) { + doprint "NEW GOOD CONFIG\n"; + %good_configs = %new_configs; + run_command "mv $good_config ${good_config}.last"; + save_config \%good_configs, $good_config; + %{$pgood} = %good_configs; + } else { + doprint "NEW BAD CONFIG\n"; + %bad_configs = %new_configs; + run_command "mv $bad_config ${bad_config}.last"; + save_config \%bad_configs, $bad_config; + %{$pbad} = %bad_configs; + } return 0; } - process_failed $start_list[0]; - return 1; + fail "Hmm, need to do a mix match?\n"; + return -1; } sub config_bisect { my ($i) = @_; - my $start_config = $config_bisect; + my $type = $config_bisect_type; + my $ret; - my $tmpconfig = "$tmpdir/use_config"; + $bad_config = $config_bisect; if (defined($config_bisect_good)) { - process_config_ignore $config_bisect_good; - } - - # Make the file with the bad config and the min config - if (defined($minconfig)) { - # read the min config for things to ignore - run_command "cp $minconfig $tmpconfig" or - dodie "failed to copy $minconfig to $tmpconfig"; + $good_config = $config_bisect_good; + } elsif (defined($minconfig)) { + $good_config = $minconfig; } else { - unlink $tmpconfig; - } - - if (-f $tmpconfig) { - load_force_config($tmpconfig); - process_config_ignore $tmpconfig; - } - - # now process the start config - run_command "cp $start_config $output_config" or - dodie "failed to copy $start_config to $output_config"; - - # read directly what we want to check - my %config_check; - open (IN, $output_config) - or dodie "failed to open $output_config"; - - while (<IN>) { - if (/^((CONFIG\S*)=.*)/) { - $config_check{$2} = $1; + doprint "No config specified, checking if defconfig works"; + $ret = run_bisect_test $type, "defconfig"; + if (!$ret) { + fail "Have no good config to compare with, please set CONFIG_BISECT_GOOD"; + return 1; } + $good_config = $output_config; } - close(IN); - # Now run oldconfig with the minconfig - make_oldconfig; + # we don't want min configs to cause issues here. + doprint "Disabling 'MIN_CONFIG' for this test\n"; + undef $minconfig; - # check to see what we lost (or gained) - open (IN, $output_config) - or dodie "Failed to read $start_config"; + my %good_configs; + my %bad_configs; + my %tmp_configs; - my %removed_configs; - my %added_configs; + doprint "Run good configs through make oldconfig\n"; + assign_configs \%tmp_configs, $good_config; + create_config "$good_config", \%tmp_configs; + assign_configs \%good_configs, $output_config; - while (<IN>) { - if (/^((CONFIG\S*)=.*)/) { - # save off all options - $config_set{$2} = $1; - if (defined($config_check{$2})) { - if (defined($config_ignore{$2})) { - $removed_configs{$2} = $1; - } else { - $config_list{$2} = $1; - } - } elsif (!defined($config_ignore{$2})) { - $added_configs{$2} = $1; - $config_list{$2} = $1; - } - } elsif (/^# ((CONFIG\S*).*)/) { - # Keep these configs disabled - $config_set{$2} = $1; - $config_off{$2} = $1; - } - } - close(IN); + doprint "Run bad configs through make oldconfig\n"; + assign_configs \%tmp_configs, $bad_config; + create_config "$bad_config", \%tmp_configs; + assign_configs \%bad_configs, $output_config; - my @confs = keys %removed_configs; - if ($#confs >= 0) { - doprint "Configs overridden by default configs and removed from check:\n"; - foreach my $config (@confs) { - doprint " $config\n"; - } - } - @confs = keys %added_configs; - if ($#confs >= 0) { - doprint "Configs appearing in make oldconfig and added:\n"; - foreach my $config (@confs) { - doprint " $config\n"; - } - } + $good_config = "$tmpdir/good_config"; + $bad_config = "$tmpdir/bad_config"; + + save_config \%good_configs, $good_config; + save_config \%bad_configs, $bad_config; - my %config_test; - my $once = 0; - @config_off_tmp = (); + if (defined($config_bisect_check) && $config_bisect_check ne "0") { + if ($config_bisect_check ne "good") { + doprint "Testing bad config\n"; - # Sometimes kconfig does weird things. We must make sure - # that the config we autocreate has everything we need - # to test, otherwise we may miss testing configs, or - # may not be able to create a new config. - # Here we create a config with everything set. - create_config (keys %config_list); - read_current_config \%config_test; - foreach my $config (keys %config_list) { - if (!defined($config_test{$config})) { - if (!$once) { - $once = 1; - doprint "Configs not produced by kconfig (will not be checked):\n"; + $ret = run_bisect_test $type, "useconfig:$bad_config"; + if ($ret) { + fail "Bad config succeeded when expected to fail!"; + return 0; } - doprint " $config\n"; - delete $config_list{$config}; } - } - my $ret; + if ($config_bisect_check ne "bad") { + doprint "Testing good config\n"; - if (defined($config_bisect_check) && $config_bisect_check) { - doprint " Checking to make sure bad config with min config fails\n"; - create_config keys %config_list; - $ret = run_config_bisect_test $config_bisect_type; - if ($ret) { - doprint " FAILED! Bad config with min config boots fine\n"; - return -1; + $ret = run_bisect_test $type, "useconfig:$good_config"; + if (!$ret) { + fail "Good config failed when expected to succeed!"; + return 0; + } } - doprint " Bad config with min config fails as expected\n"; } do { - $ret = run_config_bisect; + $ret = run_config_bisect \%good_configs, \%bad_configs; } while (!$ret); return $ret if ($ret < 0); @@ -3455,29 +3439,6 @@ sub read_depends { read_kconfig($kconfig); } -sub read_config_list { - my ($config) = @_; - - open (IN, $config) - or dodie "Failed to read $config"; - - while (<IN>) { - if (/^((CONFIG\S*)=.*)/) { - if (!defined($config_ignore{$2})) { - $config_list{$2} = $1; - } - } - } - - close(IN); -} - -sub read_output_config { - my ($config) = @_; - - assign_configs \%config_ignore, $config; -} - sub make_new_config { my @configs = @_; @@ -3863,7 +3824,7 @@ sub make_warnings_file { success $i; } -$#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl config-file\n"; +$#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl [config-file]\n"; if ($#ARGV == 0) { $ktest_config = $ARGV[0]; @@ -3873,8 +3834,6 @@ if ($#ARGV == 0) { exit 0; } } -} else { - $ktest_config = "ktest.conf"; } if (! -f $ktest_config) { diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 172eec4517fb..911e45ad657a 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -1098,49 +1098,35 @@ # # The way it works is this: # -# First it finds a config to work with. Since a different version, or -# MIN_CONFIG may cause different dependecies, it must run through this -# preparation. +# You can specify a good config with CONFIG_BISECT_GOOD, otherwise it +# will use the MIN_CONFIG, and if that's not specified, it will use +# the config that comes with "make defconfig". # -# Overwrites any config set in the bad config with a config set in -# either the MIN_CONFIG or ADD_CONFIG. Thus, make sure these configs -# are minimal and do not disable configs you want to test: -# (ie. # CONFIG_FOO is not set). +# It runs both the good and bad configs through a make oldconfig to +# make sure that they are set up for the kernel that is checked out. # -# An oldconfig is run on the bad config and any new config that -# appears will be added to the configs to test. +# It then reads the configs that are set, as well as the ones that are +# not set for both the good and bad configs, and then compares them. +# It will set half of the good configs within the bad config (note, +# "set" means to make the bad config match the good config, a config +# in the good config that is off, will be turned off in the bad +# config. That is considered a "set"). # -# Finally, it generates a config with the above result and runs it -# again through make oldconfig to produce a config that should be -# satisfied by kconfig. +# It tests this new config and if it works, it becomes the new good +# config, otherwise it becomes the new bad config. It continues this +# process until there's only one config left and it will report that +# config. # -# Then it starts the bisect. +# The "bad config" can also be a config that is needed to boot but was +# disabled because it depended on something that wasn't set. # -# The configs to test are cut in half. If all the configs in this -# half depend on a config in the other half, then the other half -# is tested instead. If no configs are enabled by either half, then -# this means a circular dependency exists and the test fails. +# During this process, it saves the current good and bad configs in +# ${TMP_DIR}/good_config and ${TMP_DIR}/bad_config respectively. +# If you stop the test, you can copy them to a new location to +# reuse them again. # -# A config is created with the test half, and the bisect test is run. -# -# If the bisect succeeds, then all configs in the generated config -# are removed from the configs to test and added to the configs that -# will be enabled for all builds (they will be enabled, but not be part -# of the configs to examine). -# -# If the bisect fails, then all test configs that were not enabled by -# the config file are removed from the test. These configs will not -# be enabled in future tests. Since current config failed, we consider -# this to be a subset of the config that we started with. -# -# When we are down to one config, it is considered the bad config. -# -# Note, the config chosen may not be the true bad config. Due to -# dependencies and selections of the kbuild system, mulitple -# configs may be needed to cause a failure. If you disable the -# config that was found and restart the test, if the test fails -# again, it is recommended to rerun the config_bisect with a new -# bad config without the found config enabled. +# Although the MIN_CONFIG may be the config it starts with, the +# MIN_CONFIG is ignored. # # The option BUILD_TYPE will be ignored. # @@ -1160,13 +1146,16 @@ # CONFIG_BISECT_GOOD (optional) # If you have a good config to start with, then you # can specify it with CONFIG_BISECT_GOOD. Otherwise -# the MIN_CONFIG is the base. +# the MIN_CONFIG is the base, if MIN_CONFIG is not set +# It will build a config with "make defconfig" # # CONFIG_BISECT_CHECK (optional) # Set this to 1 if you want to confirm that the config ktest # generates (the bad config with the min config) is still bad. # It may be that the min config fixes what broke the bad config # and the test will not return a result. +# Set it to "good" to test only the good config and set it +# to "bad" to only test the bad config. # # Example: # TEST_START diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 5c2bf8ec18f3..d10f95ce2ea4 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -13,6 +13,9 @@ TARGETS += user TARGETS += sysctl TARGETS += firmware +TARGETS_HOTPLUG = cpu-hotplug +TARGETS_HOTPLUG += memory-hotplug + all: for TARGET in $(TARGETS); do \ make -C $$TARGET; \ @@ -23,6 +26,21 @@ run_tests: all make -C $$TARGET run_tests; \ done; +hotplug: + for TARGET in $(TARGETS_HOTPLUG); do \ + make -C $$TARGET; \ + done; + +run_hotplug: hotplug + for TARGET in $(TARGETS_HOTPLUG); do \ + make -C $$TARGET run_full_test; \ + done; + +clean_hotplug: + for TARGET in $(TARGETS_HOTPLUG); do \ + make -C $$TARGET clean; \ + done; + clean: for TARGET in $(TARGETS); do \ make -C $$TARGET clean; \ diff --git a/tools/testing/selftests/README.txt b/tools/testing/selftests/README.txt index 5e2faf9c55d3..2660d5ff9179 100644 --- a/tools/testing/selftests/README.txt +++ b/tools/testing/selftests/README.txt @@ -4,8 +4,15 @@ The kernel contains a set of "self tests" under the tools/testing/selftests/ directory. These are intended to be small unit tests to exercise individual code paths in the kernel. -Running the selftests -===================== +On some systems, hot-plug tests could hang forever waiting for cpu and +memory to be ready to be offlined. A special hot-plug target is created +to run full range of hot-plug tests. In default mode, hot-plug tests run +in safe mode with a limited scope. In limited mode, cpu-hotplug test is +run on a single cpu as opposed to all hotplug capable cpus, and memory +hotplug test is run on 2% of hotplug capable memory instead of 10%. + +Running the selftests (hotplug tests are run in limited mode) +============================================================= To build the tests: @@ -18,14 +25,26 @@ To run the tests: - note that some tests will require root privileges. - -To run only tests targetted for a single subsystem: +To run only tests targeted for a single subsystem: (including +hotplug targets in limited mode) $ make -C tools/testing/selftests TARGETS=cpu-hotplug run_tests See the top-level tools/testing/selftests/Makefile for the list of all possible targets. +Running the full range hotplug selftests +======================================== + +To build the tests: + + $ make -C tools/testing/selftests hotplug + +To run the tests: + + $ make -C tools/testing/selftests run_hotplug + +- note that some tests will require root privileges. Contributing new tests ====================== diff --git a/tools/testing/selftests/cpu-hotplug/Makefile b/tools/testing/selftests/cpu-hotplug/Makefile index 790c23a9db44..e9c28d8dc84b 100644 --- a/tools/testing/selftests/cpu-hotplug/Makefile +++ b/tools/testing/selftests/cpu-hotplug/Makefile @@ -3,4 +3,7 @@ all: run_tests: @/bin/bash ./on-off-test.sh || echo "cpu-hotplug selftests: [FAIL]" +run_full_test: + @/bin/bash ./on-off-test.sh -a || echo "cpu-hotplug selftests: [FAIL]" + clean: diff --git a/tools/testing/selftests/cpu-hotplug/on-off-test.sh b/tools/testing/selftests/cpu-hotplug/on-off-test.sh index bdde7cf428bb..98b1d6565f2c 100644 --- a/tools/testing/selftests/cpu-hotplug/on-off-test.sh +++ b/tools/testing/selftests/cpu-hotplug/on-off-test.sh @@ -11,6 +11,8 @@ prerequisite() exit 0 fi + taskset -p 01 $$ + SYSFS=`mount -t sysfs | head -1 | awk '{ print $3 }'` if [ ! -d "$SYSFS" ]; then @@ -22,6 +24,19 @@ prerequisite() echo $msg cpu hotplug is not supported >&2 exit 0 fi + + echo "CPU online/offline summary:" + online_cpus=`cat $SYSFS/devices/system/cpu/online` + online_max=${online_cpus##*-} + echo -e "\t Cpus in online state: $online_cpus" + + offline_cpus=`cat $SYSFS/devices/system/cpu/offline` + if [[ "a$offline_cpus" = "a" ]]; then + offline_cpus=0 + else + offline_max=${offline_cpus##*-} + fi + echo -e "\t Cpus in offline state: $offline_cpus" } # @@ -113,15 +128,25 @@ offline_cpu_expect_fail() } error=-12 +allcpus=0 priority=0 +online_cpus=0 +online_max=0 +offline_cpus=0 +offline_max=0 -while getopts e:hp: opt; do +while getopts e:ahp: opt; do case $opt in e) error=$OPTARG ;; + a) + allcpus=1 + ;; h) - echo "Usage $0 [ -e errno ] [ -p notifier-priority ]" + echo "Usage $0 [ -a ] [ -e errno ] [ -p notifier-priority ]" + echo -e "\t default offline one cpu" + echo -e "\t run with -a option to offline all cpus" exit ;; p) @@ -138,6 +163,29 @@ fi prerequisite # +# Safe test (default) - offline and online one cpu +# +if [ $allcpus -eq 0 ]; then + echo "Limited scope test: one hotplug cpu" + echo -e "\t (leaves cpu in the original state):" + echo -e "\t online to offline to online: cpu $online_max" + offline_cpu_expect_success $online_max + online_cpu_expect_success $online_max + + if [[ $offline_cpus -gt 0 ]]; then + echo -e "\t offline to online to offline: cpu $offline_max" + online_cpu_expect_success $offline_max + offline_cpu_expect_success $offline_max + fi + exit 0 +else + echo "Full scope test: all hotplug cpus" + echo -e "\t online all offline cpus" + echo -e "\t offline all online cpus" + echo -e "\t online all offline cpus" +fi + +# # Online all hot-pluggable CPUs # for cpu in `hotplaggable_offline_cpus`; do diff --git a/tools/testing/selftests/kcmp/kcmp_test.c b/tools/testing/selftests/kcmp/kcmp_test.c index fa4f1b37e045..dbba4084869c 100644 --- a/tools/testing/selftests/kcmp/kcmp_test.c +++ b/tools/testing/selftests/kcmp/kcmp_test.c @@ -81,7 +81,7 @@ int main(int argc, char **argv) /* Compare with self */ ret = sys_kcmp(pid1, pid1, KCMP_VM, 0, 0); if (ret) { - printf("FAIL: 0 expected but %li returned (%s)\n", + printf("FAIL: 0 expected but %d returned (%s)\n", ret, strerror(errno)); ret = -1; } else diff --git a/tools/testing/selftests/memory-hotplug/Makefile b/tools/testing/selftests/memory-hotplug/Makefile index 058c76f5d102..d46b8d489cd2 100644 --- a/tools/testing/selftests/memory-hotplug/Makefile +++ b/tools/testing/selftests/memory-hotplug/Makefile @@ -1,6 +1,9 @@ all: run_tests: + @/bin/bash ./on-off-test.sh -r 2 || echo "memory-hotplug selftests: [FAIL]" + +run_full_test: @/bin/bash ./on-off-test.sh || echo "memory-hotplug selftests: [FAIL]" clean: diff --git a/tools/testing/selftests/memory-hotplug/on-off-test.sh b/tools/testing/selftests/memory-hotplug/on-off-test.sh index a2816f631542..6cddde0b96f8 100644 --- a/tools/testing/selftests/memory-hotplug/on-off-test.sh +++ b/tools/testing/selftests/memory-hotplug/on-off-test.sh @@ -142,10 +142,16 @@ fi prerequisite +echo "Test scope: $ratio% hotplug memory" +echo -e "\t online all hotplug memory in offline state" +echo -e "\t offline $ratio% hotplug memory in online state" +echo -e "\t online all hotplug memory in offline state" + # # Online all hot-pluggable memory # for memory in `hotplaggable_offline_memory`; do + echo offline-online $memory online_memory_expect_success $memory done @@ -154,6 +160,7 @@ done # for memory in `hotpluggable_online_memory`; do if [ $((RANDOM % 100)) -lt $ratio ]; then + echo online-offline $memory offline_memory_expect_success $memory fi done @@ -162,6 +169,7 @@ done # Online all hot-pluggable memory again # for memory in `hotplaggable_offline_memory`; do + echo offline-online $memory online_memory_expect_success $memory done diff --git a/tools/testing/selftests/mqueue/Makefile b/tools/testing/selftests/mqueue/Makefile index 218a122c7951..8056e2e68fa4 100644 --- a/tools/testing/selftests/mqueue/Makefile +++ b/tools/testing/selftests/mqueue/Makefile @@ -1,6 +1,6 @@ all: - gcc -O2 -lrt mq_open_tests.c -o mq_open_tests - gcc -O2 -lrt -lpthread -lpopt -o mq_perf_tests mq_perf_tests.c + gcc -O2 mq_open_tests.c -o mq_open_tests -lrt + gcc -O2 -o mq_perf_tests mq_perf_tests.c -lrt -lpthread -lpopt run_tests: @./mq_open_tests /test1 || echo "mq_open_tests: [FAIL]" diff --git a/tools/testing/selftests/mqueue/mq_open_tests.c b/tools/testing/selftests/mqueue/mq_open_tests.c index 711cc2923047..9c1a5d359055 100644 --- a/tools/testing/selftests/mqueue/mq_open_tests.c +++ b/tools/testing/selftests/mqueue/mq_open_tests.c @@ -80,7 +80,8 @@ void shutdown(int exit_val, char *err_cause, int line_no) if (in_shutdown++) return; - seteuid(0); + if (seteuid(0) == -1) + perror("seteuid() failed"); if (queue != -1) if (mq_close(queue)) @@ -292,8 +293,10 @@ int main(int argc, char *argv[]) /* Tell the user our initial state */ printf("\nInitial system state:\n"); printf("\tUsing queue path:\t\t%s\n", queue_path); - printf("\tRLIMIT_MSGQUEUE(soft):\t\t%d\n", saved_limits.rlim_cur); - printf("\tRLIMIT_MSGQUEUE(hard):\t\t%d\n", saved_limits.rlim_max); + printf("\tRLIMIT_MSGQUEUE(soft):\t\t%ld\n", + (long) saved_limits.rlim_cur); + printf("\tRLIMIT_MSGQUEUE(hard):\t\t%ld\n", + (long) saved_limits.rlim_max); printf("\tMaximum Message Size:\t\t%d\n", saved_max_msgsize); printf("\tMaximum Queue Size:\t\t%d\n", saved_max_msgs); if (default_settings) { @@ -308,8 +311,8 @@ int main(int argc, char *argv[]) validate_current_settings(); printf("Adjusted system state for testing:\n"); - printf("\tRLIMIT_MSGQUEUE(soft):\t\t%d\n", cur_limits.rlim_cur); - printf("\tRLIMIT_MSGQUEUE(hard):\t\t%d\n", cur_limits.rlim_max); + printf("\tRLIMIT_MSGQUEUE(soft):\t\t%ld\n", (long) cur_limits.rlim_cur); + printf("\tRLIMIT_MSGQUEUE(hard):\t\t%ld\n", (long) cur_limits.rlim_max); printf("\tMaximum Message Size:\t\t%d\n", cur_max_msgsize); printf("\tMaximum Queue Size:\t\t%d\n", cur_max_msgs); if (default_settings) { @@ -454,7 +457,12 @@ int main(int argc, char *argv[]) else printf("Queue open with total size > 2GB when euid = 0 " "failed:\t\t\tPASS\n"); - seteuid(99); + + if (seteuid(99) == -1) { + perror("seteuid() failed"); + exit(1); + } + attr.mq_maxmsg = cur_max_msgs; attr.mq_msgsize = cur_max_msgsize; if (test_queue_fail(&attr, &result)) diff --git a/tools/testing/selftests/mqueue/mq_perf_tests.c b/tools/testing/selftests/mqueue/mq_perf_tests.c index 2fadd4b97045..94dae65eea41 100644 --- a/tools/testing/selftests/mqueue/mq_perf_tests.c +++ b/tools/testing/selftests/mqueue/mq_perf_tests.c @@ -296,9 +296,9 @@ static inline void open_queue(struct mq_attr *attr) printf("\n\tQueue %s created:\n", queue_path); printf("\t\tmq_flags:\t\t\t%s\n", result.mq_flags & O_NONBLOCK ? "O_NONBLOCK" : "(null)"); - printf("\t\tmq_maxmsg:\t\t\t%d\n", result.mq_maxmsg); - printf("\t\tmq_msgsize:\t\t\t%d\n", result.mq_msgsize); - printf("\t\tmq_curmsgs:\t\t\t%d\n", result.mq_curmsgs); + printf("\t\tmq_maxmsg:\t\t\t%lu\n", result.mq_maxmsg); + printf("\t\tmq_msgsize:\t\t\t%lu\n", result.mq_msgsize); + printf("\t\tmq_curmsgs:\t\t\t%lu\n", result.mq_curmsgs); } void *fake_cont_thread(void *arg) @@ -440,7 +440,7 @@ void *perf_test_thread(void *arg) shutdown(2, "clock_getres()", __LINE__); printf("\t\tMax priorities:\t\t\t%d\n", mq_prio_max); - printf("\t\tClock resolution:\t\t%d nsec%s\n", res.tv_nsec, + printf("\t\tClock resolution:\t\t%lu nsec%s\n", res.tv_nsec, res.tv_nsec > 1 ? "s" : ""); @@ -454,20 +454,20 @@ void *perf_test_thread(void *arg) recv_total.tv_nsec = 0; for (i = 0; i < TEST1_LOOPS; i++) do_send_recv(); - printf("\t\tSend msg:\t\t\t%d.%ds total time\n", + printf("\t\tSend msg:\t\t\t%ld.%lus total time\n", send_total.tv_sec, send_total.tv_nsec); nsec = ((unsigned long long)send_total.tv_sec * 1000000000 + send_total.tv_nsec) / TEST1_LOOPS; - printf("\t\t\t\t\t\t%d nsec/msg\n", nsec); - printf("\t\tRecv msg:\t\t\t%d.%ds total time\n", + printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec); + printf("\t\tRecv msg:\t\t\t%ld.%lus total time\n", recv_total.tv_sec, recv_total.tv_nsec); nsec = ((unsigned long long)recv_total.tv_sec * 1000000000 + recv_total.tv_nsec) / TEST1_LOOPS; - printf("\t\t\t\t\t\t%d nsec/msg\n", nsec); + printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec); for (cur_test = test2; cur_test->desc != NULL; cur_test++) { - printf(cur_test->desc); + printf("%s:\n", cur_test->desc); printf("\t\t(%d iterations)\n", TEST2_LOOPS); prio_out = 0; send_total.tv_sec = 0; @@ -493,16 +493,16 @@ void *perf_test_thread(void *arg) cur_test->func(&prio_out); } printf("done.\n"); - printf("\t\tSend msg:\t\t\t%d.%ds total time\n", + printf("\t\tSend msg:\t\t\t%ld.%lus total time\n", send_total.tv_sec, send_total.tv_nsec); nsec = ((unsigned long long)send_total.tv_sec * 1000000000 + send_total.tv_nsec) / TEST2_LOOPS; - printf("\t\t\t\t\t\t%d nsec/msg\n", nsec); - printf("\t\tRecv msg:\t\t\t%d.%ds total time\n", + printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec); + printf("\t\tRecv msg:\t\t\t%ld.%lus total time\n", recv_total.tv_sec, recv_total.tv_nsec); nsec = ((unsigned long long)recv_total.tv_sec * 1000000000 + recv_total.tv_nsec) / TEST2_LOOPS; - printf("\t\t\t\t\t\t%d nsec/msg\n", nsec); + printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec); printf("\t\tDraining queue..."); fflush(stdout); clock_gettime(clock, &start); @@ -653,8 +653,10 @@ int main(int argc, char *argv[]) /* Tell the user our initial state */ printf("\nInitial system state:\n"); printf("\tUsing queue path:\t\t\t%s\n", queue_path); - printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%d\n", saved_limits.rlim_cur); - printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%d\n", saved_limits.rlim_max); + printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%ld\n", + (long) saved_limits.rlim_cur); + printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%ld\n", + (long) saved_limits.rlim_max); printf("\tMaximum Message Size:\t\t\t%d\n", saved_max_msgsize); printf("\tMaximum Queue Size:\t\t\t%d\n", saved_max_msgs); printf("\tNice value:\t\t\t\t%d\n", cur_nice); @@ -667,10 +669,10 @@ int main(int argc, char *argv[]) printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t(unlimited)\n"); printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t(unlimited)\n"); } else { - printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%d\n", - cur_limits.rlim_cur); - printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%d\n", - cur_limits.rlim_max); + printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%ld\n", + (long) cur_limits.rlim_cur); + printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%ld\n", + (long) cur_limits.rlim_max); } printf("\tMaximum Message Size:\t\t\t%d\n", cur_max_msgsize); printf("\tMaximum Queue Size:\t\t\t%d\n", cur_max_msgs); diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh index ee1f6cae3d70..3f6c9b78d177 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh @@ -54,10 +54,16 @@ do if test -f "$i/qemu-cmd" then print_bug qemu failed + echo " $i" + elif test -f "$i/buildonly" + then + echo Build-only run, no boot/test + configcheck.sh $i/.config $i/ConfigFragment + parse-build.sh $i/Make.out $configfile else print_bug Build failed + echo " $i" fi - echo " $i" fi done done diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh index 27e544e29510..0f69dcbf9def 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh @@ -42,6 +42,7 @@ grace=120 T=/tmp/kvm-test-1-run.sh.$$ trap 'rm -rf $T' 0 +touch $T . $KVM/bin/functions.sh . $KVPATH/ver_functions.sh @@ -131,7 +132,10 @@ boot_args=$6 cd $KVM kstarttime=`awk 'BEGIN { print systime() }' < /dev/null` -echo ' ---' `date`: Starting kernel +if test -z "$TORTURE_BUILDONLY" +then + echo ' ---' `date`: Starting kernel +fi # Generate -smp qemu argument. qemu_args="-nographic $qemu_args" @@ -157,12 +161,13 @@ boot_args="`configfrag_boot_params "$boot_args" "$config_template"`" # Generate kernel-version-specific boot parameters boot_args="`per_version_boot_params "$boot_args" $builddir/.config $seconds`" -echo $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append \"$qemu_append $boot_args\" > $resdir/qemu-cmd if test -n "$TORTURE_BUILDONLY" then echo Build-only run specified, boot/test omitted. + touch $resdir/buildonly exit 0 fi +echo $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append \"$qemu_append $boot_args\" > $resdir/qemu-cmd ( $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append "$qemu_append $boot_args"; echo $? > $resdir/qemu-retval ) & qemu_pid=$! commandcompleted=0 diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh index 40285c58653e..589e9c38413b 100644 --- a/tools/testing/selftests/rcutorture/bin/kvm.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm.sh @@ -340,12 +340,18 @@ function dump(first, pastlast) for (j = 1; j < jn; j++) { builddir=KVM "/b" j print "rm -f " builddir ".ready" - print "echo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date`"; - print "echo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date` >> " rd "/log"; + print "if test -z \"$TORTURE_BUILDONLY\"" + print "then" + print "\techo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date`"; + print "\techo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date` >> " rd "/log"; + print "fi" } print "wait" - print "echo ---- All kernel runs complete. `date`"; - print "echo ---- All kernel runs complete. `date` >> " rd "/log"; + print "if test -z \"$TORTURE_BUILDONLY\"" + print "then" + print "\techo ---- All kernel runs complete. `date`"; + print "\techo ---- All kernel runs complete. `date` >> " rd "/log"; + print "fi" for (j = 1; j < jn; j++) { builddir=KVM "/b" j print "echo ----", cfr[j], cpusr[j] ovf ": Build/run results:"; @@ -385,10 +391,7 @@ echo echo echo " --- `date` Test summary:" echo Results directory: $resdir/$ds -if test -z "$TORTURE_BUILDONLY" -then - kvm-recheck.sh $resdir/$ds -fi +kvm-recheck.sh $resdir/$ds ___EOF___ if test "$dryrun" = script @@ -403,7 +406,7 @@ then sed -e 's/:.*$//' -e 's/^echo //' exit 0 else - # Not a dryru, so run the script. + # Not a dryrun, so run the script. sh $T/script fi diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE01 b/tools/testing/selftests/rcutorture/configs/rcu/TREE01 index 9c827ec59a97..063b7079c621 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE01 +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE01 @@ -15,7 +15,6 @@ CONFIG_RCU_FANOUT_EXACT=n CONFIG_RCU_NOCB_CPU=y CONFIG_RCU_NOCB_CPU_ZERO=y CONFIG_DEBUG_LOCK_ALLOC=n -CONFIG_PROVE_RCU_DELAY=n CONFIG_RCU_CPU_STALL_INFO=n CONFIG_RCU_CPU_STALL_VERBOSE=n CONFIG_RCU_BOOST=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE02 b/tools/testing/selftests/rcutorture/configs/rcu/TREE02 index 1a777b5f68b5..ea119ba2f7d4 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE02 +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE02 @@ -18,7 +18,6 @@ CONFIG_RCU_FANOUT_EXACT=n CONFIG_RCU_NOCB_CPU=n CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=n -CONFIG_PROVE_RCU_DELAY=n CONFIG_RCU_CPU_STALL_INFO=n CONFIG_RCU_CPU_STALL_VERBOSE=y CONFIG_RCU_BOOST=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T b/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T index 61c8d9ce5bb2..19cf9485f48a 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T @@ -18,7 +18,6 @@ CONFIG_RCU_FANOUT_EXACT=n CONFIG_RCU_NOCB_CPU=n CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=n -CONFIG_PROVE_RCU_DELAY=n CONFIG_RCU_CPU_STALL_INFO=n CONFIG_RCU_CPU_STALL_VERBOSE=y CONFIG_RCU_BOOST=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE03 b/tools/testing/selftests/rcutorture/configs/rcu/TREE03 index c1f111c1561b..f4567fb3e332 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE03 +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE03 @@ -14,7 +14,6 @@ CONFIG_RCU_FANOUT_LEAF=4 CONFIG_RCU_FANOUT_EXACT=n CONFIG_RCU_NOCB_CPU=n CONFIG_DEBUG_LOCK_ALLOC=n -CONFIG_PROVE_RCU_DELAY=n CONFIG_RCU_CPU_STALL_INFO=n CONFIG_RCU_CPU_STALL_VERBOSE=n CONFIG_RCU_BOOST=y diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE04 b/tools/testing/selftests/rcutorture/configs/rcu/TREE04 index 7dbd27ce17a4..0a262fbb0c12 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE04 +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE04 @@ -18,7 +18,6 @@ CONFIG_RCU_FANOUT_LEAF=2 CONFIG_RCU_FANOUT_EXACT=n CONFIG_RCU_NOCB_CPU=n CONFIG_DEBUG_LOCK_ALLOC=n -CONFIG_PROVE_RCU_DELAY=n CONFIG_RCU_CPU_STALL_INFO=y CONFIG_RCU_CPU_STALL_VERBOSE=y CONFIG_DEBUG_OBJECTS_RCU_HEAD=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE05 b/tools/testing/selftests/rcutorture/configs/rcu/TREE05 index d0f32e574743..3a06b97e9a73 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE05 +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE05 @@ -18,7 +18,6 @@ CONFIG_RCU_NOCB_CPU_NONE=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y CONFIG_PROVE_RCU=y -CONFIG_PROVE_RCU_DELAY=y CONFIG_RCU_CPU_STALL_INFO=n CONFIG_RCU_CPU_STALL_VERBOSE=n CONFIG_DEBUG_OBJECTS_RCU_HEAD=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE06 b/tools/testing/selftests/rcutorture/configs/rcu/TREE06 index 2e477dfb9c57..8f084cca91bf 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE06 +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE06 @@ -19,7 +19,6 @@ CONFIG_RCU_NOCB_CPU=n CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y CONFIG_PROVE_RCU=y -CONFIG_PROVE_RCU_DELAY=n CONFIG_RCU_CPU_STALL_INFO=n CONFIG_RCU_CPU_STALL_VERBOSE=n CONFIG_DEBUG_OBJECTS_RCU_HEAD=y diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE07 b/tools/testing/selftests/rcutorture/configs/rcu/TREE07 index 042f86ef362a..ab6225506909 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE07 +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE07 @@ -17,7 +17,6 @@ CONFIG_RCU_FANOUT_LEAF=2 CONFIG_RCU_FANOUT_EXACT=n CONFIG_RCU_NOCB_CPU=n CONFIG_DEBUG_LOCK_ALLOC=n -CONFIG_PROVE_RCU_DELAY=n CONFIG_RCU_CPU_STALL_INFO=y CONFIG_RCU_CPU_STALL_VERBOSE=n CONFIG_DEBUG_OBJECTS_RCU_HEAD=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE08 b/tools/testing/selftests/rcutorture/configs/rcu/TREE08 index 3438cee1e3c5..69a2e255bf98 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE08 +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE08 @@ -18,7 +18,6 @@ CONFIG_RCU_FANOUT_LEAF=2 CONFIG_RCU_NOCB_CPU=y CONFIG_RCU_NOCB_CPU_ALL=y CONFIG_DEBUG_LOCK_ALLOC=n -CONFIG_PROVE_RCU_DELAY=n CONFIG_RCU_CPU_STALL_INFO=n CONFIG_RCU_CPU_STALL_VERBOSE=n CONFIG_RCU_BOOST=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE08-T b/tools/testing/selftests/rcutorture/configs/rcu/TREE08-T index bf4523d3e44c..a0f32fb8f17e 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE08-T +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE08-T @@ -18,7 +18,6 @@ CONFIG_RCU_FANOUT_LEAF=2 CONFIG_RCU_NOCB_CPU=y CONFIG_RCU_NOCB_CPU_ALL=y CONFIG_DEBUG_LOCK_ALLOC=n -CONFIG_PROVE_RCU_DELAY=n CONFIG_RCU_CPU_STALL_INFO=n CONFIG_RCU_CPU_STALL_VERBOSE=n CONFIG_RCU_BOOST=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE09 b/tools/testing/selftests/rcutorture/configs/rcu/TREE09 index 81e4f7c0bf0b..b7a62a540ad1 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE09 +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE09 @@ -13,7 +13,6 @@ CONFIG_SUSPEND=n CONFIG_HIBERNATION=n CONFIG_RCU_NOCB_CPU=n CONFIG_DEBUG_LOCK_ALLOC=n -CONFIG_PROVE_RCU_DELAY=n CONFIG_RCU_CPU_STALL_INFO=n CONFIG_RCU_CPU_STALL_VERBOSE=n CONFIG_RCU_BOOST=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P5-U-T-NH-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P5-U-T-NH-sd-SMP-hp index ef624ce73d8e..a55c00877fe4 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P5-U-T-NH-sd-SMP-hp +++ b/tools/testing/selftests/rcutorture/configs/rcu/v0.0/P5-U-T-NH-sd-SMP-hp @@ -13,7 +13,6 @@ CONFIG_PREEMPT_VOLUNTARY=n CONFIG_PREEMPT=y #CHECK#CONFIG_TREE_PREEMPT_RCU=y CONFIG_DEBUG_KERNEL=y -CONFIG_PROVE_RCU_DELAY=y CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_RCU_HEAD=y CONFIG_RT_MUTEXES=y diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P5-U-T-NH-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P5-U-T-NH-sd-SMP-hp index ef624ce73d8e..a55c00877fe4 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P5-U-T-NH-sd-SMP-hp +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.12/P5-U-T-NH-sd-SMP-hp @@ -13,7 +13,6 @@ CONFIG_PREEMPT_VOLUNTARY=n CONFIG_PREEMPT=y #CHECK#CONFIG_TREE_PREEMPT_RCU=y CONFIG_DEBUG_KERNEL=y -CONFIG_PROVE_RCU_DELAY=y CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_RCU_HEAD=y CONFIG_RT_MUTEXES=y diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P5-U-T-NH-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P5-U-T-NH-sd-SMP-hp index ef624ce73d8e..a55c00877fe4 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P5-U-T-NH-sd-SMP-hp +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.3/P5-U-T-NH-sd-SMP-hp @@ -13,7 +13,6 @@ CONFIG_PREEMPT_VOLUNTARY=n CONFIG_PREEMPT=y #CHECK#CONFIG_TREE_PREEMPT_RCU=y CONFIG_DEBUG_KERNEL=y -CONFIG_PROVE_RCU_DELAY=y CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_RCU_HEAD=y CONFIG_RT_MUTEXES=y diff --git a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P5-U-T-NH-sd-SMP-hp b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P5-U-T-NH-sd-SMP-hp index ef624ce73d8e..a55c00877fe4 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P5-U-T-NH-sd-SMP-hp +++ b/tools/testing/selftests/rcutorture/configs/rcu/v3.5/P5-U-T-NH-sd-SMP-hp @@ -13,7 +13,6 @@ CONFIG_PREEMPT_VOLUNTARY=n CONFIG_PREEMPT=y #CHECK#CONFIG_TREE_PREEMPT_RCU=y CONFIG_DEBUG_KERNEL=y -CONFIG_PROVE_RCU_DELAY=y CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_RCU_HEAD=y CONFIG_RT_MUTEXES=y diff --git a/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt b/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt index adbb76cffb49..3e588db86a17 100644 --- a/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt +++ b/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt @@ -14,7 +14,6 @@ CONFIG_NO_HZ_FULL_SYSIDLE -- Do one. CONFIG_PREEMPT -- Do half. (First three and #8.) CONFIG_PROVE_LOCKING -- Do all but two, covering CONFIG_PROVE_RCU and not. CONFIG_PROVE_RCU -- Do all but one under CONFIG_PROVE_LOCKING. -CONFIG_PROVE_RCU_DELAY -- Do one. CONFIG_RCU_BOOST -- one of TREE_PREEMPT_RCU. CONFIG_RCU_BOOST_PRIO -- set to 2 for _BOOST testing. CONFIG_RCU_CPU_STALL_INFO -- do one with and without _VERBOSE. |