diff options
Diffstat (limited to 'sound')
| -rw-r--r-- | sound/pci/hda/patch_analog.c | 8 | ||||
| -rw-r--r-- | sound/pci/hda/patch_realtek.c | 133 |
2 files changed, 141 insertions, 0 deletions
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 53d0edaf04c7..0253cb93aa7f 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3985,6 +3985,14 @@ static int patch_ad1884a(struct hda_codec *codec) spec->multiout.dig_out_nid = 0; codec->patch_ops.unsol_event = ad1884a_hp_unsol_event; codec->patch_ops.init = ad1884a_hp_init; + /* set the upper-limit for mixer amp to 0dB for avoiding the + * possible damage by overloading + */ + snd_hda_override_amp_caps(codec, 0x20, HDA_INPUT, + (0x17 << AC_AMPCAP_OFFSET_SHIFT) | + (0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) | + (0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) | + (1 << AC_AMPCAP_MUTE_SHIFT)); break; case AD1884A_THINKPAD: spec->mixers[0] = ad1984a_thinkpad_mixers; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d7f255e3b916..50ae8f33af5f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -78,6 +78,7 @@ enum { ALC260_ACER, ALC260_WILL, ALC260_REPLACER_672V, + ALC260_FAVORIT100, #ifdef CONFIG_SND_DEBUG ALC260_TEST, #endif @@ -4472,6 +4473,26 @@ static struct hda_input_mux alc260_acer_capture_sources[2] = { }, }, }; + +/* Maxdata Favorit 100XS */ +static struct hda_input_mux alc260_favorit100_capture_sources[2] = { + { + .num_items = 2, + .items = { + { "Line/Mic", 0x0 }, + { "CD", 0x4 }, + }, + }, + { + .num_items = 3, + .items = { + { "Line/Mic", 0x0 }, + { "CD", 0x4 }, + { "Mixer", 0x5 }, + }, + }, +}; + /* * This is just place-holder, so there's something for alc_build_pcms to look * at when it calculates the maximum number of channels. ALC260 has no mixer @@ -4752,6 +4773,18 @@ static struct snd_kcontrol_new alc260_acer_mixer[] = { { } /* end */ }; +/* Maxdata Favorit 100XS: one output and one input (0x12) jack + */ +static struct snd_kcontrol_new alc260_favorit100_mixer[] = { + HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT), + ALC_PIN_MODE("Output Jack Mode", 0x0f, ALC_PIN_DIR_INOUT), + HDA_CODEC_VOLUME("Line/Mic Playback Volume", 0x07, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Line/Mic Playback Switch", 0x07, 0x0, HDA_INPUT), + ALC_PIN_MODE("Line/Mic Jack Mode", 0x12, ALC_PIN_DIR_IN), + { } /* end */ +}; + /* Packard bell V7900 ALC260 pin usage: HP = 0x0f, Mic jack = 0x12, * Line In jack = 0x14, CD audio = 0x16, pc beep = 0x17. */ @@ -5123,6 +5156,89 @@ static struct hda_verb alc260_acer_init_verbs[] = { { } }; +/* Initialisation sequence for Maxdata Favorit 100XS + * (adapted from Acer init verbs). + */ +static struct hda_verb alc260_favorit100_init_verbs[] = { + /* GPIO 0 enables the output jack. + * Turn this on and rely on the standard mute + * methods whenever the user wants to turn these outputs off. + */ + {0x01, AC_VERB_SET_GPIO_MASK, 0x01}, + {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01}, + {0x01, AC_VERB_SET_GPIO_DATA, 0x01}, + /* Line/Mic input jack is connected to Mic1 pin */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, + /* Ensure all other unused pins are disabled and muted. */ + {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Disable digital (SPDIF) pins */ + {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, + {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, + + /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum + * bus when acting as outputs. + */ + {0x0b, AC_VERB_SET_CONNECT_SEL, 0}, + {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, + + /* Start with output sum widgets muted and their output gains at min */ + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + + /* Unmute Line-out pin widget amp left and right + * (no equiv mixer ctrl) + */ + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Unmute Mic1 and Line1 pin widget input buffers since they start as + * inputs. If the pin mode is changed by the user the pin mode control + * will take care of enabling the pin's input/output buffers as needed. + * Therefore there's no need to enable the input buffer at this + * stage. + */ + {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + + /* Mute capture amp left and right */ + {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Set ADC connection select to match default mixer setting - mic + * (on mic1 pin) + */ + {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Do similar with the second ADC: mute capture input amp and + * set ADC connection to mic to match ALSA's default state. + */ + {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Mute all inputs to mixer widget (even unconnected ones) */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ + + { } +}; + static struct hda_verb alc260_will_verbs[] = { {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x0b, AC_VERB_SET_CONNECT_SEL, 0x00}, @@ -5664,6 +5780,7 @@ static const char *alc260_models[ALC260_MODEL_LAST] = { [ALC260_ACER] = "acer", [ALC260_WILL] = "will", [ALC260_REPLACER_672V] = "replacer", + [ALC260_FAVORIT100] = "favorit100", #ifdef CONFIG_SND_DEBUG [ALC260_TEST] = "test", #endif @@ -5673,6 +5790,7 @@ static const char *alc260_models[ALC260_MODEL_LAST] = { static struct snd_pci_quirk alc260_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x007b, "Acer C20x", ALC260_ACER), SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER), + SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100), SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013), @@ -5774,6 +5892,18 @@ static struct alc_config_preset alc260_presets[] = { .num_mux_defs = ARRAY_SIZE(alc260_acer_capture_sources), .input_mux = alc260_acer_capture_sources, }, + [ALC260_FAVORIT100] = { + .mixers = { alc260_favorit100_mixer }, + .init_verbs = { alc260_favorit100_init_verbs }, + .num_dacs = ARRAY_SIZE(alc260_dac_nids), + .dac_nids = alc260_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), + .adc_nids = alc260_dual_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc260_modes), + .channel_mode = alc260_modes, + .num_mux_defs = ARRAY_SIZE(alc260_favorit100_capture_sources), + .input_mux = alc260_favorit100_capture_sources, + }, [ALC260_WILL] = { .mixers = { alc260_will_mixer }, .init_verbs = { alc260_init_verbs, alc260_will_verbs }, @@ -7028,6 +7158,7 @@ static int patch_alc882(struct hda_codec *codec) case 0x106b3e00: /* iMac 24 Aluminium */ board_config = ALC885_IMAC24; break; + case 0x106b00a0: /* MacBookPro3,1 - Another revision */ case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */ case 0x106b00a4: /* MacbookPro4,1 */ case 0x106b2c00: /* Macbook Pro rev3 */ @@ -8483,6 +8614,8 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO), SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G", ALC888_ACER_ASPIRE_4930G), + SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G", + ALC888_ACER_ASPIRE_4930G), /* default Acer */ SND_PCI_QUIRK_VENDOR(0x1025, "Acer laptop", ALC883_ACER), SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL), |