diff options
Diffstat (limited to 'init')
| -rw-r--r-- | init/calibrate.c | 102 | ||||
| -rw-r--r-- | init/do_mounts.c | 3 | ||||
| -rw-r--r-- | init/do_mounts_rd.c | 2 | ||||
| -rw-r--r-- | init/main.c | 99 | ||||
| -rw-r--r-- | init/version.c | 1 |
5 files changed, 72 insertions, 135 deletions
diff --git a/init/calibrate.c b/init/calibrate.c index 24fe022c55f9..76ac9194cbc4 100644 --- a/init/calibrate.c +++ b/init/calibrate.c @@ -110,8 +110,8 @@ static unsigned long __cpuinit calibrate_delay_direct(void) {return 0;} /* * This is the number of bits of precision for the loops_per_jiffy. Each - * bit takes on average 1.5/HZ seconds. This (like the original) is a little - * better than 1% + * time we refine our estimate after the first takes 1.5/HZ seconds, so try + * to start with a good estimate. * For the boot cpu we can skip the delay calibration and assign it a value * calculated based on the timer frequency. * For the rest of the CPUs we cannot assume that the timer frequency is same as @@ -119,10 +119,72 @@ static unsigned long __cpuinit calibrate_delay_direct(void) {return 0;} */ #define LPS_PREC 8 +static unsigned long __cpuinit calibrate_delay_converge(void) +{ + /* First stage - slowly accelerate to find initial bounds */ + unsigned long lpj, lpj_base, ticks, loopadd, loopadd_base, chop_limit; + int trials = 0, band = 0, trial_in_band = 0; + + lpj = (1<<12); + + /* wait for "start of" clock tick */ + ticks = jiffies; + while (ticks == jiffies) + ; /* nothing */ + /* Go .. */ + ticks = jiffies; + do { + if (++trial_in_band == (1<<band)) { + ++band; + trial_in_band = 0; + } + __delay(lpj * band); + trials += band; + } while (ticks == jiffies); + /* + * We overshot, so retreat to a clear underestimate. Then estimate + * the largest likely undershoot. This defines our chop bounds. + */ + trials -= band; + loopadd_base = lpj * band; + lpj_base = lpj * trials; + +recalibrate: + lpj = lpj_base; + loopadd = loopadd_base; + + /* + * Do a binary approximation to get lpj set to + * equal one clock (up to LPS_PREC bits) + */ + chop_limit = lpj >> LPS_PREC; + while (loopadd > chop_limit) { + lpj += loopadd; + ticks = jiffies; + while (ticks == jiffies) + ; /* nothing */ + ticks = jiffies; + __delay(lpj); + if (jiffies != ticks) /* longer than 1 tick */ + lpj -= loopadd; + loopadd >>= 1; + } + /* + * If we incremented every single time possible, presume we've + * massively underestimated initially, and retry with a higher + * start, and larger range. (Only seen on x86_64, due to SMIs) + */ + if (lpj + loopadd * 2 == lpj_base + loopadd_base * 2) { + lpj_base = lpj; + loopadd_base <<= 2; + goto recalibrate; + } + + return lpj; +} + void __cpuinit calibrate_delay(void) { - unsigned long ticks, loopbit; - int lps_precision = LPS_PREC; static bool printed; if (preset_lpj) { @@ -139,39 +201,9 @@ void __cpuinit calibrate_delay(void) pr_info("Calibrating delay using timer " "specific routine.. "); } else { - loops_per_jiffy = (1<<12); - if (!printed) pr_info("Calibrating delay loop... "); - while ((loops_per_jiffy <<= 1) != 0) { - /* wait for "start of" clock tick */ - ticks = jiffies; - while (ticks == jiffies) - /* nothing */; - /* Go .. */ - ticks = jiffies; - __delay(loops_per_jiffy); - ticks = jiffies - ticks; - if (ticks) - break; - } - - /* - * Do a binary approximation to get loops_per_jiffy set to - * equal one clock (up to lps_precision bits) - */ - loops_per_jiffy >>= 1; - loopbit = loops_per_jiffy; - while (lps_precision-- && (loopbit >>= 1)) { - loops_per_jiffy |= loopbit; - ticks = jiffies; - while (ticks == jiffies) - /* nothing */; - ticks = jiffies; - __delay(loops_per_jiffy); - if (jiffies != ticks) /* longer than 1 tick */ - loops_per_jiffy &= ~loopbit; - } + loops_per_jiffy = calibrate_delay_converge(); } if (!printed) pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n", diff --git a/init/do_mounts.c b/init/do_mounts.c index 2b54bef33b55..3e0112157795 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -293,7 +293,8 @@ static int __init do_mount_root(char *name, char *fs, int flags, void *data) sys_chdir((const char __user __force *)"/root"); ROOT_DEV = current->fs->pwd.mnt->mnt_sb->s_dev; - printk("VFS: Mounted root (%s filesystem)%s on device %u:%u.\n", + printk(KERN_INFO + "VFS: Mounted root (%s filesystem)%s on device %u:%u.\n", current->fs->pwd.mnt->mnt_sb->s_type->name, current->fs->pwd.mnt->mnt_sb->s_flags & MS_RDONLY ? " readonly" : "", MAJOR(ROOT_DEV), MINOR(ROOT_DEV)); diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c index 6e1ee6987c78..fe9acb0ae480 100644 --- a/init/do_mounts_rd.c +++ b/init/do_mounts_rd.c @@ -64,7 +64,7 @@ identify_ramdisk_image(int fd, int start_block, decompress_fn *decompressor) buf = kmalloc(size, GFP_KERNEL); if (!buf) - return -1; + return -ENOMEM; minixsb = (struct minix_super_block *) buf; ext2sb = (struct ext2_super_block *) buf; diff --git a/init/main.c b/init/main.c index 33c37c379e96..4a9479ef4540 100644 --- a/init/main.c +++ b/init/main.c @@ -129,63 +129,6 @@ static char *static_command_line; static char *execute_command; static char *ramdisk_execute_command; -#ifdef CONFIG_SMP -/* Setup configured maximum number of CPUs to activate */ -unsigned int setup_max_cpus = NR_CPUS; -EXPORT_SYMBOL(setup_max_cpus); - - -/* - * Setup routine for controlling SMP activation - * - * Command-line option of "nosmp" or "maxcpus=0" will disable SMP - * activation entirely (the MPS table probe still happens, though). - * - * Command-line option of "maxcpus=<NUM>", where <NUM> is an integer - * greater than 0, limits the maximum number of CPUs activated in - * SMP mode to <NUM>. - */ - -void __weak arch_disable_smp_support(void) { } - -static int __init nosmp(char *str) -{ - setup_max_cpus = 0; - arch_disable_smp_support(); - - return 0; -} - -early_param("nosmp", nosmp); - -/* this is hard limit */ -static int __init nrcpus(char *str) -{ - int nr_cpus; - - get_option(&str, &nr_cpus); - if (nr_cpus > 0 && nr_cpus < nr_cpu_ids) - nr_cpu_ids = nr_cpus; - - return 0; -} - -early_param("nr_cpus", nrcpus); - -static int __init maxcpus(char *str) -{ - get_option(&str, &setup_max_cpus); - if (setup_max_cpus == 0) - arch_disable_smp_support(); - - return 0; -} - -early_param("maxcpus", maxcpus); -#else -static const unsigned int setup_max_cpus = NR_CPUS; -#endif - /* * If set, this is an indication to the drivers that reset the underlying * device before going ahead with the initialization otherwise driver might @@ -362,7 +305,7 @@ static int __init rdinit_setup(char *str) __setup("rdinit=", rdinit_setup); #ifndef CONFIG_SMP - +static const unsigned int setup_max_cpus = NR_CPUS; #ifdef CONFIG_X86_LOCAL_APIC static void __init smp_init(void) { @@ -374,37 +317,6 @@ static void __init smp_init(void) static inline void setup_nr_cpu_ids(void) { } static inline void smp_prepare_cpus(unsigned int maxcpus) { } - -#else - -/* Setup number of possible processor ids */ -int nr_cpu_ids __read_mostly = NR_CPUS; -EXPORT_SYMBOL(nr_cpu_ids); - -/* An arch may set nr_cpu_ids earlier if needed, so this would be redundant */ -static void __init setup_nr_cpu_ids(void) -{ - nr_cpu_ids = find_last_bit(cpumask_bits(cpu_possible_mask),NR_CPUS) + 1; -} - -/* Called by boot processor to activate the rest. */ -static void __init smp_init(void) -{ - unsigned int cpu; - - /* FIXME: This should be done in userspace --RR */ - for_each_present_cpu(cpu) { - if (num_online_cpus() >= setup_max_cpus) - break; - if (!cpu_online(cpu)) - cpu_up(cpu); - } - - /* Any cleanup work */ - printk(KERN_INFO "Brought up %ld CPUs\n", (long)num_online_cpus()); - smp_cpus_done(setup_max_cpus); -} - #endif /* @@ -875,15 +787,6 @@ static int __init kernel_init(void * unused) * init can run on any cpu. */ set_cpus_allowed_ptr(current, cpu_all_mask); - /* - * Tell the world that we're going to be the grim - * reaper of innocent orphaned children. - * - * We don't want people to have to make incorrect - * assumptions about where in the task array this - * can be found. - */ - init_pid_ns.child_reaper = current; cad_pid = task_pid(current); diff --git a/init/version.c b/init/version.c index adff586401a5..86fe0ccb997a 100644 --- a/init/version.c +++ b/init/version.c @@ -33,6 +33,7 @@ struct uts_namespace init_uts_ns = { .machine = UTS_MACHINE, .domainname = UTS_DOMAINNAME, }, + .user_ns = &init_user_ns, }; EXPORT_SYMBOL_GPL(init_uts_ns); |